Ostas Km 1,2 nakup rabljenega (10.682)

Stanje: novo, - Capacity 700 x 4 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - 2 speeds - Conical rolling - Swiveling top roller - Braked motor - Foot switch - Emergency stop - Documentation Ppodjh Rbvgjpfx Agxsr - 400V

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 90 mm, razmak između stupova: 1.100 mm, Stroj KraussMaffei KM650-4300 GX Zapiralna sila (kN): 6500 Razmak med vodilnimi stebri (V x Š) (mm): 1110 x 960 Hod odpiranja orodja (mm): 1450 Minimalna višina orodja (mm): 450 Maksimalna višina orodja (mm): 1000 Hod izmetalnega sistema (mm): 250 Premer polža (mm): 90 (mešalni HPS-M) Razmerje L/D: 20 Vbrizgalni tlak (bar): 1839 Vbrizgalni volumen (cm³): 2290 Vrsta krmilja: MC5 Jezik zaslona: Nemščina Stanje: Preverjeno, pripravljeno za delo Oprema: - Protidusne izravnalne noge - BluePower – servopogonska črpalka za nižjo porabo energije - Obrabno odporna plastifikacijska enota, doplačilo - BluePower – popolna izolacija plastifikacijskega cilindra za nižjo porabo energije - 2 x pnevmatski ventil na gibljivem orodnem nosilcu za pihalno funkcijo - 2 x pnevmatski ventil na fiksnem orodnem nosilcu za pihalno funkcijo - Pnevmatsko kaskadno krmiljenje, 4-kratno za vročotekalne sisteme - Hidravlično kaskadno krmiljenje, 4-kratno za vročotekalne sisteme - Krmiljenje transporterja - Mehanski robotski vmesnik po standardu EUROMAP 18 - Hidravlično krmiljena izmetalna plošča vključno z navojnimi in izvrtinami za izmetalne vijake v gibljivem orodnem nosilcu - Hidravlični vleki jeder, 2-kratno na gibljivem orodnem nosilcu - Hidravlični vleki jeder, 2-kratno na fiksnem orodnem nosilcu - Pnevmatski vleki jeder, 1-kratno na gibljivem orodnem nosilcu - Pnevmatski vleki jeder, 1-kratno na fiksnem orodnem nosilcu - Tlačna razbremenitev za hidravlični vleki jeder - Tlačna razbremenitev za hidravlične kaskadne ventile - 20 regulacijskih tokokrogov za vročotekalne sisteme - Kombinacija vtičnic (3 enofazne, 2 CEE 16 A, 1 CEE 32 A) - Potencialno prosto kontakt za signal "plastifikacija" na vtičnici HAN 3 A - Preklop na zadrževalni tlak glede na tlak v votlini (Kistler) - Statistika kakovosti - Enota za branje čip kartic - Paket za prikaz in analizo grafov z 10 grafi - Grafični trendi - PV-zaprto zankovno krmiljenje - Vmesnik za proizvodne podatke z 5 potencialno prostimi kontakti v električni omari - 3 prosto programabilni vhodi in izhodi v električni omari KraussMaffei linearni robot LRX 350: - Popolnoma integrirano krmiljenje - Horizontalni hod: 4000 mm - Vertikalni hod (teleskopski): 2000 mm - Hod za izmet: 1200 mm - Največja nosilnost: 35 kg - Vakuumski krogi: 4x - Tlačni krogi: 4x - Rotacijska servo A-os (0–270°) Podpfxjy E Rnco Agxspr - Pnevmatska C-os (0–90°) - Krmiljenje transporterja - Varnostni paket; mehka funkcija - Odmik

Stanje: rabljeno, prevoženi kilometri: 200.000 km, moč: 265 kW (360,30 KM), prva registracija: 09/2015, vrsta goriva: dizel, skupna masa: 26.000 kg, emisijski razred: Euro 6, Oprema: ABS, klimatska naprava, parkirni grelec, Mercedes Antos 2536 Prva registracija: 04/2015 SAMO 209.000 km Nadgradnja/ponjava Drsna ponjava Nevtralna ponjava brez reklam Medosna razdalja 4600 Vzmetenje zrak/zrak Klimatska naprava Stacionarno gretje Nemško vozilo Tehnični pregled (TÜV) po želji nov Ppedpsy Hzh Nofx Agxsr Nosilnost 15,5 ton Nadgradnja: 725 cm V: 275 cm Š: 245 cm !!!! USTREZEN PRIKOLICA NA VOLJO ZA 6900 € !!!! ----nemščina/angleščina/srbščina/hrvaščina/bosanščina/bolgarščin a..... Goran nemščina/angleščina/p?????/?????..... Roman Z veseljem vam uredimo financiranje ali leasing Prodaja v EU: neto po predložitvi dokumentov podjetja in številke za DDV Polog za DDV 2000 € Naše storitve za vas: - Carinske tablice - Izvozni dokumenti in EUR1 - Prevoz po vsem svetu - Možnost prenočitve - Prevoz iz letališča München ali železniške postaje Passau

Stanje: rabljeno, prevoženi kilometri: 300.000 km, moč: 265 kW (360,30 KM), prva registracija: 09/2015, vrsta goriva: dizel, skupna masa: 26.000 kg, emisijski razred: Euro 6, Oprema: ABS, klimatska naprava, parkirni grelec, Mercedes Antos 2536 EZ: km Kason/cerada Ppedpsy Hggqjfx Agxor Drsna cerada Nevtralna cerada brez oglaševanja Medosna razdalja 4600 Vzmetenje zrak/zrak Klimatska naprava Dodatno gretje Nemško vozilo TÜV ob želji na novo Nosilnost 15,5 ton Dimenzije kasona: D: 730 cm, Š: 245 cm, V: 275 cm !!!!! USTREZEN PRIKOLICA NA VOLJO ZA 6900¤ !!!!! ---- nemško/angleško/srbsko/hrvaško/bosansko/bolgarsko..... Goran nemško/angleško/p?????/?????..... Roman Poskrbimo za vašo financiranje ali leasing Prodaja v EU: neto po predložitvi podjetniške dokumentacije in ID za DDV Kavcija za DDV 2000¤ Naše storitve za vas: - Carinske tablice - Izvozni dokumenti in EUR1 - Prevoz po celem svetu - Možnost prenočitve - Prevoz iz letališča München ali železniške postaje Passau

Stanje: dober (rabljeno), Leto izdelave: 2014, Zapiralna sila: 1150 t Razdalja med stebri HxV: 1580x1280 mm Premer vijaka: 90 mm Teža brizga: 2084 g Prostornina brizga: 2290 cm3 Ppjdpfsy Epp Ajx Agxer Tip: Horizontalen Pogon: Hidravlični

Stanje: rabljeno, prevoženi kilometri: 458.000 km, moč: 315 kW (428,28 KM), prva registracija: 05/2015, vrsta goriva: dizel, skupna masa: 26.000 kg, zavore: retarder, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, Actros 2543 Prva registracija: 05/2014 LE 458.000 km Številka šasije: WDB9630211L945883 Retarder Volumen / Pnevmatike 295/60 22,5 Nemško vozilo Vozilo s TÜV ---- nemško/angleško/srbsko/hrvaško/bosansko/bolgarsko..... Goran Ppjdpfsy Ha Eajx Agxjr nemško/angleško/p?????/?????..... Roman Z veseljem uredimo vašo financiranje ali leasing Prodaja EU: neto po predložitvi podjetniške dokumentacije in številke za DDV DDV kavcija 2000 ¤ Naša storitev za vas: - Carinske tablice - Izvozni papirji in EUR1 - Prevoz po svetu - Možnost prenočitve - Transfer z letališča München ali železniške postaje Passau

Stanje: rabljeno, prevoženi kilometri: 438.000 km, moč: 310 kW (421,48 KM), prva registracija: 06/2014, vrsta goriva: dizel, skupna masa: 26.000 kg, zavore: retarder, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, Actros 2542 Prva registracija: 06/2014 LE 438000 km VIN: WDB9630211L851443 Retarder Prostornina / Pnevmatske gume 295/60 22,5 Nemško vozilo Podpfx Asy Eazrsgxopr Vozilo s TÜV ----nemško/angleško/srbsko/hrvaško/bosansko/bolgarsko..... Goran nemško/angleško/p?????/?????..... Roman Z veseljem uredimo vaše financiranje ali leasing Prodaja EU: neto po predložitvi podjetniške dokumentacije in številke za DDV DDV kavcija 2000 € Naša storitev za vas: - Carinske tablice - Izvozni dokumenti in EUR1 - Prevoz po svetu - Možnost prenočitve - Transfer z letališča München ali postaje Passau

Stanje: rabljeno, prevoženi kilometri: 45.762 km, moč: 114 kW (155,00 KM), prva registracija: 06/2024, vrsta goriva: dizel, lastna masa: 2.650 kg, največja dovoljena obremenitev: 850 kg, skupna masa: 3.500 kg, konfiguracija osi: 4x2, medosna razdalja: 4.100 mm, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, prostornina tovornega prostora: 19 m³, dolžina tovornega prostora: 4.320 mm, širina tovornega prostora: 2.110 mm, višina nakladalnega prostora: 2.100 mm, Oprema: ABS, dvižna zadnja plošča, klimatska naprava, CERTIFIED PRE-OWNED Standard, bela barva IC 194, lastna masa: 2650 kg, največja dovoljena masa: 3500 kg, tovorni prostor (D Š V): 4.320 mm x 2.110 mm x 2.100 mm, volumen tovornega prostora: 19 m³, sedeži iz blaga, notranja barva antracit, listnasto vzmetenje, 2 x zračni meh, nakladalna dvižna ploščad, elektronski stabilnostni program ESP, radio, digitalni radijski sprejem DAB, vzvratna kamera, servoojačevalnik volana, nastavljiv volanski steber, električna stekla, električno nastavljiva zunanja ogledala, imobilizator, centralno zaklepanje, dvojne gume na zadnji osi, lesen pod v tovornem prostoru, dnevne luči, LOKACIJA: MÜNCHEN / Kontaktna oseba: g. Räpple / Tel.: Pridržujemo si pravico do napak in sprememb. Ppedpfsy Et Tnex Agxjr

Stanje: rabljeno, prevoženi kilometri: 126.300 km, moč: 55 kW (74,78 KM), prva registracija: 03/2016, vrsta goriva: dizel, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 5, število sedežev: 2, dolžina tovornega prostora: 1.400 mm, Leto izdelave: 2016, - Rabljeno dostavno vozilo: Fiat Fiorino Van, 2 sedeža. - Prva registracija: 03/2016, Motor: 1.3 Mjet 75 KM Euro 5, prevoženih: 126.300 km. - Furgon z 2 sedežema, dimenzije tovornega prostora: 1.400 mm, obloga tal tovornega prostora, 6 fiksirnih sponk, desna drsna stranska vrata, 2 vzdolžni nosilni prečki na strehi. - Oprema: klimatska naprava, radio s CD predvajalnikom, centralno zaklepanje, dvoje ključev. - Karoserija in notranjost dobro ohranjeni, mehanika v dobrem delujočem stanju. - Zadnji servis opravljen pri 123.000 km. Tehnični pregled veljaven do februarja 2027. _____ CARLO MAURI S.r.l. - Lurago d’Erba - Via Vallassina 6 - Tel. 031.699.049 - Prodajalci: Emanuele, Luca, Giuseppe, Davide. - Lurago d’Erba (provinca Como), Lombardija. Delovni čas: pon-pet: 8.30–12.15, 14.00–19.00; sobota: 8.30–12.00, 14.00–17.00. - Certificirana kilometrina. - Možnost testne vožnje po predhodnem dogovoru. - Prenos lastništva opravimo na kraju samem. - Možnost prilagojenega financiranja. Carlo Mauri S.r.l. ne prevzema nobene odgovornosti za morebitne nenamerne napake v oglasu, ki ne predstavlja nobene pogodbene obveznosti. Cene so navedene brez DDV in stroškov prenosa lastništva. Ppjdoy Hmcxepfx Agxsr

Stanje: rabljeno, prevoženi kilometri: 44.200 km, moč: 100 kW (135,96 KM), prva registracija: 04/2024, vrsta goriva: dizel, največja dovoljena obremenitev: 850 kg, skupna masa: 2.800 kg, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, dolžina tovornega prostora: 2.600 mm, višina nakladalnega prostora: 1.350 mm, Leto izdelave: 2024, - Used Truck: Ford Custom 280 Van L1 Titanium. - Registration: April 2024, Engine: 2.0 EcoBlue 136hp Euro 6d, 6-speed gearbox, Km: 44,200. - Van / L1 Cargo Van, Cargo compartment dimensions: 2,600 x h. 1,350 mm, Bulkhead with opening for long loads (530 mm), Complete cargo area lining. - Titanium trim, equipped with: Automatic climate control, SYNC 4 Touch with Apple Carplay / Android Auto Wireless, USB, Bluetooth, Front / rear parking sensors and rear-view camera, Cruise control, LED headlights, Alloy wheels, Folding mirrors, Keyless entry and start, Two keys, Spare wheel. - Bodywork and interior as new, Mechanical parts with 12-month dealer warranty. - New front and rear tyres. One-owner vehicle. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Como Province), Lombardy Opening hours: Monday to Friday: 8:30 / 12:15 - 14:00 / 19:00 Saturday: 8:30 / 12:00 - 14:00 / 17:00 - Certified mileage. - Test drive available by appointment. - Ownership transfer available on site. Ppsdoy Hmcrepfx Agxsr - Custom financing options available. Carlo Mauri Srl accepts no responsibility for any unintentional discrepancies in this listing which does not represent any contractual commitment; prices shown are exclusive of VAT and registration transfer fees.

Stanje: rabljeno, Leto izdelave: 2011, 1 kos mostnega žerjava STOCKER 1,2/2x05 Nosilnost: 2x 250 kg, dolžina cca 6 m, žerjav je že demontiran, na paleti Barva: kot prikazano, glede na slike in ogled Leto izdelave: 2011 Stanje: rabljeno Ppjdpfxoy D Nc Ae Agxsr Skladiščenje blaga: zunanja površina Način plačila: predplačilo z bančnim nakazilom Dostava: samo osebni prevzem na lokaciji Ditzingen-Heimerdingen

Stanje: rabljeno, prevoženi kilometri: 68.300 km, moč: 96 kW (130,52 KM), prva registracija: 03/2019, vrsta goriva: dizel, medosna razdalja: 3.750 mm, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, dolžina tovornega prostora: 3.400 mm, višina nakladalnega prostora: 1.900 mm, Leto izdelave: 2019, - Used Truck: Ford Transit 310 Van L3 H2 Trend. - Year: 2019, Engine: 2.0 TDCi 130hp Euro 6, 6-speed manual gearbox, Mileage: 68,300 km. - Van / L3 H2 model, long wheelbase, Load compartment dimensions: 3,400 x h. 1,900 mm, Fully lined load area with full-height panelling. - Trend trim, equipped with: Air conditioning, Radio-Bluetooth with USB, Fog lights, Cruise control, Front and rear parking sensors, LED daytime running lights, On-board computer, Central locking, Two keys, Spare wheel, Driver's airbag. - Bodywork and interior in excellent condition, Mechanics with 12-month warranty. - NEW front and rear tyres. MOT valid until March 2027. - Single owner vehicle. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales staff: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy Opening hours: Monday to Friday: 8:30 / 12:15 - 14:00 / 19:00 Saturday: 8:30 / 12:00 - 14:00 / 17:00 Ppedpfjywi Raox Agxer - Certified mileage. - Test drive available by appointment. - On-site ownership transfer. - Custom financing options available. Carlo Mauri Srl declines any responsibility for any unintentional discrepancies in this advertisement, which does not constitute any contractual commitment. The prices shown are exclusive of VAT and registration fees.

Stanje: zelo dobro (rabljeno), Linjalo za Raimann KM 310 Podpfx Ageyaxdaexopr

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Ppjdpfx Ajh R Taqogxsr Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: Psdpofdkb Tofx Agxjpr - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing Ppedpsd Tqalofx Agxer - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. Ppodpfxefdkb Uo Agxjr The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. Pjdpfx Aefdkbhogxopr We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: Ppodpsguk Dkjfx Agxjr - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. Podpfx Ajmhhy Nogxopr The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: rabljeno, največja dovoljena obremenitev: 13.950 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2021, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 4.880 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 900 mm, Oprema: ABS, Schwarzmüller M serija, stranske stene levo in desno iz aluminija, čelna stena in zadnja loputa iz jekla, stranske stranice višine 90 cm, SAF Intradrum osi z bobnastimi zavorami, ABS, ESP, zračno vzmetenje, vlečna očesa 50 mm, rolo ponjava, tehnični pregled nov, prikolica ima 72.000 km, pnevmatike 3x 70%, 1x 50%, prikolica je v dobrem in takoj pripravljena za uporabo stanju. Ppjdpfx Agoy Hy Smoxsr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Injection Moulding Machine Krauss Maffei KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13000 Platen dimensions (HxV) [mm]: 2210 x 1910 Tie bar spacing (HxV) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700-1400 Max. opening stroke [mm]: 3050 Max. ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm3]: 5195 Injection weight PS [g]: 4728 Injection pressure [bar]: 2296 Max. injection speed [g/s PS]: 186 Electrical/hydraulic equipment: Rated pump motor power [kW]: 132 Ppodpfxoy Hqwyj Agxer Rated screw motor power [kW]: 145 Heaters power [kW]: 71 Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Cores: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow valves + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – cylinder thermal insulation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Krauss Maffei KM 130-750 CX Leto izdelave: 2010 Vbrizgalna enota: Premer polža: 40 mm Teža vbrizga: 228 g Tlak vbrizga: 2500 bar Dozirni volumen: 251 ccm Zapiralna enota: Zapiralna sila: 130 t Razmak med vodili: 470x470 mm Velikost vpenjalnih plošč: 745x770 mm Psdpfxoy Dqikj Agxopr Izmetalec: hidravlični Zapiralna enota: hidravlična Krmiljenje: MC5 Dodatna oprema: Euromap 67 Vmesnik za robota Hidravlični izvlek jedra x 1 Zračni izvlek jedra x 6 Krmiljenje z vročimi kanalizacijami x 18 Vbrizgalna enota kaljena – bimetal Proporcionalni ventil na vbrizgalni enoti – natančen vbrizg Dimenzije: Teža: 9000 kg Dolžina/Širina/Višina: 4,90x1,60x2,10 m Vsi ponujeni stroji so pred prodajo zagnani s strani naših serviserjev. Možno je prejeti video tehničnega testa izbranega stroja ali sodelovati na tehničnih testih v živo v našem podjetju v Lodžu. Cena: na zahtevo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cc Clamping unit: Clamping force: 250 t Tie bar spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum monitoring x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable delivery hydraulic pumps Parallel movements Proportional valve on the injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes electrically driven with servomotors: X, Y, Z, B; C axis Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor at extra cost Podpfoy Dqiwex Agxspr Dimensions: Weight: 20,100 kg Length/width/height: 6.50 x 2.20 x 2.30 m All machines offered are put into operation by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Krauss Maffei KM 35-55 CX / Machine in Very Good Technical Condition Year of Manufacture: 2008 Injection Unit: - Screw Diameter: 18 mm - Shot Weight: 18 g - Injection Pressure: 2,500 bar - Dosing Volume: 20 ccm Clamping Unit: - Clamping Force: 35 t - Tie Bar Distance: 320 x 320 mm - Platen Size: 540 x 540 mm - Ejector: Hydraulic Pedjy Dp Huspfx Agxopr - Clamping Unit: Hydraulic Control System: MC V - Touchscreen Additional Equipment: - Machine in very good technical condition - Euromap 67 - Robot Interface - Air Valve x 2 - Controller with 6 Hot Runner Zones - Injection Unit Hardened – Bimetallic - Machine regularly serviced by authorized Krauss Maffei service in Germany - Option to change screw diameter to 20 mm or 22 mm Dimensions: - Weight: 2,600 kg - Length/Width/Height: 3.50 x 1.40 x 1.70 m Drive: - Pump/Motor: 11 kW - Heating Power: 3.78 kW - Total Power: 14.78 kW All machines offered are tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request