Mtf Technik Bfr nakup rabljenega (6.628)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2027, stiskalna sila: 50 t, Stroj, izdelan po naročilu: Hitri stiskalni stroj B500-950, v celoti obnovljen. Dolžina mize 950 mm, po želji tudi 1150 mm ali 1250 mm, Nastavljiva višina giba od 16 do 51 mm, Namesto valjnega podajalnika Bruderer BBV 202/120 je mogoča vgradnja servo podajalnika. Za podrobne ponudbe nas kontaktirajte. Nwjdpfszlqk Usx Anpon

Stanje: rabljeno, Stroj za pakiranje v folijo, stroj za pakiranje v vrečke, vertikalni stroj za oblikovanje, polnjenje in zapiranje (VFFS), Hastamat R 250, rabljen stroj Proizvajalec: Hastamat Verpackungstechnik GmbH Model: R 250 Letnik proizvodnje: 1999 Moč: 5 kW Napetost napajanja: 230/400 V, 50 Hz (potreben je trifazni industrijski vir napajanja) Širina vrečke: 70–250 mm Dolžina vrečke: 100–400 mm Nsdpozktxljfx Anpjwn Proizvodnja: do 160 vrečk/minuto Celotne dimenzije: Širina: 2600 mm Globina: 1780 mm Višina: 2500 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: - Number of spindles: 1 - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment Nsdpfx Asw E H E Rjnpjwn - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, Univerzalno lasersko označevalno sistema LAS 28 XLe podjetja Systemtechnik Hölzer GmbH je primerno za širok spekter označevanj. Z vgrajenim vlakenskim laserjem lahko označujete skoraj vse materiale, kot so jeklo, trda zlitina, aluminij in plastika. Odvisno od zahtev lahko sistem opremite z 20, 30 ali 50-vatnim vlakenskim laserjem. Za trajno označevanje je uporaba laserja v mnogih panogah danes nujna. Z zmogljivo lasersko programsko opremo lahko besedila, številke, 2D-kode, kode QR in logotipe ustvarite z nekaj kliki, pri čemer ni potrebno veliko znanja programiranja. Programska oprema samodejno šteje serijske in artikel številke po predhodni nastavitvi. Poleg tega lahko programska oprema prebere podatke (spreminjajoče se informacije, kot so številke risb, imena projektov itd.) iz obstoječih tabel in jih samodejno prenese v predhodno določena območja. Možna je tudi uporaba ročnega skenerja. Standardna oprema vključuje vgrajen osebni računalnik z operacijskim sistemom Windows in lasersko programsko opremo. Po želji lahko laserski model LAS 28 XLe opremite z vrtilno osjo (3-čeljustna glava) za označevanje cilindričnih delov. Na voljo so tudi druge možnosti, kot so stranski nosilci za označevanje dolgih delov, premikajoča se Z-os, sistemi predalov itd. Možne so tudi programirljive osi, ki jih upravlja programska oprema (osi X, Y, Z), kot tudi povezava z bazo podatkov. Izdelano v Nemčiji Vlakenski laser: 30 W, 20 W ali 50 W • Razred laserja: 1 • Valovna dolžina: 1064 nm • Velikost označevalnega polja: 150 x 150 mm (po želji večje) • Programska oprema za označevanje: EZCAD (v nemščini/angleščini) • Po želji: Vrtilna os (3-čeljustna glava) • Po želji: Digitalni sistem za merjenje višine • Po želji: Odsesavanje (vključno z aktivnim ogljičnim filtrom) • Po želji: Sistem za samodejno ostrenje - sistem za samodejno določanje razdalje do žariščne točke • Po želji: Programirljivi osi X, Y in Z (upravljane s programsko opremo) • Pilotni laser (enostaven predogled, predogled konture) • Iskalnik žariščne točke (enostavna nastavitev žariščne točke) • Semaforski signal za prikaz delovnega stanja • Maksimalna višina obdelovanca: približno 300 mm • Električno nastavljiva Z-os • Vgrajen osebni računalnik z operacijskim sistemom Windows • Nastavljiva višina stojala za zaslon in tipkovnico • Okvir iz aluminijastega profila • Hladjenje z zrakom • Izredno velik notranji prostor • Širina vrat: približno 700 mm / višina vrat (odprtina): 400 mm • Priključna napetost: 230 V • Dimenzije: približno 900 x 800 x 1900 mm (D x Š x V) • Teža: približno 120 kg Nwodpfx Aewkpvvonpon

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 100 kg, skupna višina: 1.660 mm, Leto izdelave: 2025, vhodna napetost: 230 V, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, Laser for Product Marking – The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, laser technology has become indispensable for durable marking. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software increases serial and article numbers automatically after initial setup. Furthermore, the software can extract data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Standard equipment includes a laptop with a holder and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, are also available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – system for automatic focus distance determination • Signal tower for operating status display • Marking software EZCAD (optional additional laser software) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (work level adjustment) • Frame made of aluminum profile Nodpfxowkpwaj Anpewn • 230V connection • Air cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660 mm (L x W x H) • Weight: approx. 80 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small components. Due to its compact design, the system is highly practical and can be used anywhere. The device is very easy to operate even without programming skills. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optionally: 20 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg Nodpfx Anewkpxkepjwn

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, skupna masa: 160 kg, skupna dolžina: 1.300 mm, skupna širina: 800 mm, skupna višina: 1.930 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, valovna dolžina laserja: 10.600 nm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: CO₂ laser, Oprema: osvetlitev, The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. After prior setup, the software independently increments serial and article numbers. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a handheld scanner is also possible. A laptop including a mounting bracket with a Windows operating system is included as standard equipment. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. Additional options, such as side-mounted supports for marking long components, are also available. 60 Watt CO2 laser (optional: 30 W) • Wavelength: 10,640 nm • Marking field size: 220 x 220 mm • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (including activated carbon filter) • Optional: Supports for large workpieces (also on both sides) • Marking software EZCAD in German / English • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height: approx. 300 mm • Electrically adjustable Z-axis • Laptop including mounting bracket with Windows operating system • Frame made of aluminum profile Nsdpfx Anowkpyhspewn • Air-cooled • Door width: approx. 720 mm / Door height: 400 mm • Connection: 230V • Dimensions: approx. 1000 x 800 x 2000 mm (L x W x H) • Weight: approx. 160 kg

Stanje: rabljeno, Leto izdelave: 2003, Etiketirni stroj Krones Prontomatic tip 12-6/6-4, Stroj (dopolnilo): Etiketiranje steklenic Kapaciteta: 13.500 steklenic/uro, etiketiranje s sponko Napetost: 400 V Frekvenca: 50 Hz Dolžina: 2.450 mm Širina: 2.000 mm Višina: 2.500 mm Formati: povratni zamašek: 0,33l, 0,5l NRW; enkratni zamašek: 0,33l; zamašek na sponko: 0,5l, 0,58l Razdelitev stroja: 180 mm Smer delovanja: desno-levo Nwodpfexbpggjx Anpon Upravljanje / Krmiljenje: Simatic S7-300 Oprema: vstopna zvezda, izstopna zvezda, valjčne krtače, žigi in blazinice za vrat, trup in hrbet, električna omarica, krmiljenje Simatic S7-300 Teža: 9.000 kg

Stanje: dober (rabljeno), Leto izdelave: 2019, Volumetrični merilnik, vključno z merjenjem teže za zbiranje osnovnih podatkov, znamke Bosche – rabljen: Cena ob dostavi: zdaj samo 4.500 € namesto 8.500 € (neto)! Proizvajalec: Bosche Wägetechnik Tip: zippcube Verjetno velikost M Serijska številka: Z201900158 Letnik proizvodnje: verjetno 2019 Maks. 50 kg 16–20 V/DC Lastna teža tehtnice: 110 kg Nwodpfsxqffdsx Anpjn Z zaslonom HMI 12 Kombinirano merjenje volumna in teže v enem postopku Idealno za zbiranje osnovnih podatkov s hkratičnim merjenjem prostornine Nova cena: približno 20.000 € (neto) zippcube M | Merjenje volumna in teže do 50 kg. Robustna zasnova, natančne tehtalne celice in intuitivna programska oprema za učinkovito logistiko. Stanje: dobro Na voljo: takoj Lokacija: Biberach

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, skupna masa: 150 kg, skupna višina: 2.300 mm, skupna dolžina: 1.200 mm, skupna širina: 600 mm, nosilnost na stojalo: 5 kg, delovno območje: 400 mm, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) Nwsdpoxrgkwjfx Anpen • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 14 kg, trajanje garancije: 12 meseci, vhodna napetost: 230 V, skupna dolžina: 420 mm, skupna višina: 450 mm, skupna širina: 245 mm, volumenski pretok: 420 m³/h, Oprema: nizka raven hrupa, šasija, Fume extraction unit with remote control and extraction hose Air inlet interface øm flange Nwodpjxrgl Isfx Anpon Max. power 300W Air velocity 24 m/s Filtration efficiency 0.3 µm / 99.97% Noise level

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Semi-automatic Depaneling / Base Machine with Parallel Shuttle The dynamic depaneling machine LOW 4322 XL is specifically designed for medium to high product volumes and meets increasing demands in the production process. PCB panels of various material types are separated using low-dust and low-stress sawing and milling technologies, ensuring maximum product flexibility, precision, and throughput. Highly dynamic linear motor axes, tooling, and grippers satisfy the highest quality standards and guarantee long service life and reliability for the depaneling solution. Semi-automatic Depaneling – Solutions on Demand The LOW 4322 XL depaneling machine allows for rapid product changeover while maintaining short separation and handling times. Panelized PCBs are loaded via a parallel shuttle, clamped using pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measuring system • Dual loading module configured as a parallel shuttle, separated left and right with sliding doors • Steel welded frame with two maintenance doors – left and right. ESD • Standard vision system base module for teach-in programming • Working area: 520 x 480 mm • Automatic milling cutter length processing • Remote maintenance/support via remote connection • Touch IPC with Windows 10 Pro operating system • Laser axis measurement including protocol • Air ionization • Milling cutter breakage monitoring (shaft milling cutters only) • Prepared for vacuum clamping technology • ESD powder coating, RAL 9002, including window and sliding doors An optional dust extraction unit can be offered retrospectively. Nsdpovuw R Refx Anpewn

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Nwedswh Rp Eopfx Anpsn Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° - Rotary range: 360° - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Stanje: rabljeno, Leto izdelave: 1975, Workpiece diameter 125 mm Grinding depth 50 mm Clamping length 2000 mm Total power requirement 0.5 kW Machine weight approx. 1000 kg Space requirement approx. ... m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock: T E C H N I C A (Switzerland) Vertical Centre Hole Grinding Machine Model ZSM 5100 - 2000 Year approx. 1975 Serial No. 66 32 7872 _____ Centre distance 50 – 2,000 mm Workpiece diameter 8 - 125 mm Swing diameter at tailstock centre / guideway 290 mm Swing diameter at vice / grinding head column approx. 300 mm Workpiece weight approx. 250 kg Max. centre hole taper diameter 2-50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 4-150 mm Njdovanrcjpfx Anpewn Grinding head stroke, vertical, coarse adjustment 130 mm Fine infeed of grinding pin via handwheel 0.01-1 mm Grinding pin diameter 20 - 60 mm Grinding spindle speeds depending on belt pulley 13,000 – 45,000 rpm Workpiece drive 0 rpm Total drive approx. 0.5 kW 400 V - 50 Hz Weight approx. 1,000 kg Accessories / Special equipment: • The machine has been extended with a bolted base to 2000 mm! • In this machine, the grinding pin rotates around a parallel, offset axis and thereby generates a planetary movement along the hollow conical surface to be ground at the centre of the workpiece. • Manually height-adjustable workpiece centre rest with carbide inserts and counter-centre, including manual clamping and centring of the workpiece. • Manually operated dressing device mounted laterally to the grinding spindle, stroke approx. 40 mm with an additional oscillating movement for generating a geometrically exact conical form • Pneumatic oil mist lubrication for grinding spindle • Workpiece pre-centring device, foldable • Manually height-adjustable tailstock and recess in the machine base for longer workpieces, but without workpiece drive in the tailstock. Condition: good – ready for demonstration – current new price at least approx. €80,000. Rare machine! A video can be found at this link: Delivery: ex stock - as inspected Payment: net – payment upon receipt of invoice before delivery We look forward to receiving your order. Further centre hole grinding machines available.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 100 kg, skupna dolžina: 800 mm, skupna širina: 600 mm, skupna višina: 1.660 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta laserja: vlakenski laser, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers once configured. In addition, the software is capable of reading data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transferring them into predefined sections. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mount and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral extensions for marking long workpieces, are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – system for automatic determination of focus distance • Signal lamp to indicate operating status • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height approx. 270mm • Electrically adjustable Z-axis (work surface adjustment) • Frame made of aluminum profile • Connection 230V • Air cooled • Laptop with Windows OS • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg Nwjdpfjv Sybyex Anpen

Stanje: dober (rabljeno), Količina: 16 kosov Ponujamo paket vstavnih rezalnih ploščic LMT Fette + Kieninger. !!!NOVO!!! Ponujamo paket, ki vsebuje = 1 paket = 10 kosov --> Znamka LMT Fette, vstavne rezalne plošče --> ISO-koda SNKX 12 AN - 12301 (LC240T) Nsdpfx Anjx Sr Aujpewn Ponujamo paket, ki vsebuje = 1 paket = 6 kosov --> Znamka Kieninger, vstavne rezalne plošče TP 10 G LC230T)

Stanje: skoraj kot novo (rabljeno), Količina: 15 paketov. Ponujamo paket zamenljivih rezalnih ploščic LMT Fette. !!!NOVO!!! Ponujamo paket, ki vsebuje 16 paketov = 151 kosov. Nwsdpfjx Sr Azex Anpjn --> Znamka: LMT Fette, zamenljive rezalne ploščice. --> Koda LMT: SPKX 120508 - 1052247 (LC240T).

Stanje: skoraj kot novo (rabljeno), Manufacturer: Siebtechnik Type: V 15/20/1 Size: 1,500 x 2,000 mm Nsdpfeg Snuhox Anpown Decks: 1 Includes: – Drive unit – Springs Overhauled, sandblasted, and painted.

Stanje: rabljeno, Leto izdelave: 2002, Features: Condition: fully operational, with signs of use Ideal for quick material transport Professionally disassembled and packaged Manufacturer: Transtechnik GmbH Year of manufacture: 03/02 Condition: Used Model type: 110/650 Overall length: approx. 1120 mm Overall width incl. motor: approx. 830 mm Overall width excl. motor: approx. 730 mm Belt width: approx. 650 mm Nwjdektf Ncepfx Anpsn Belt type: Smooth Color: Stainless steel grey/ black Material: Stainless steel Drive type: Drum motor Belt Conveyor Thanks to the excellent workmanship of the belt conveyor, your materials glide gently to their destination, even under heavy load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for the loading and unloading of your goods, we are your competent partner! We are happy to provide you with a customized quotation or to advise you on planning and assembly questions. Simply let us know your needs and the on-site requirements. Benefit from our many years of experience and our excellent network of specialists. We have already successfully realized projects for companies in various industries, such as logistics, pharmaceuticals, trades, or the electronics sector. Together, we will work out ways to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting solutions or additional components such as picking racks or bins.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.550 mm, skupna višina: 2.050 mm, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, Univerzalni laserski sistem za označevanje LAS 28 XLe podjetja Systemtechnik Hölzer GmbH je primeren za širok spekter označevanj. Z vgrajenim vlakenskim laserjem lahko označujete skoraj vse materiale, kot so jeklo, trda kovina, aluminij in plastika. Odvisno od zahtev lahko sistem opremite z vlakenskim laserjem z močjo 20, 30 ali 50 W. Za trajno označevanje je uporaba laserja v številnih panogah danes nepogrešljiva. Z zmogljivo lasersko programsko opremo lahko ustvarite besedila, številke, 2D-kode, QR-kode in logotipe brez obsežnega programerske znanja, in to z le nekaj kliki. Programska oprema samodejno povečuje serijske in številke izdelkov po predhodni nastavitvi. Poleg tega lahko programska oprema prebere podatke (variabilne informacije, kot so številke risb, imena projektov itd.) iz obstoječih tabel in jih samodejno prenese v preddefnirana območja. Možna je tudi uporaba ročnega skenerja. Standardna oprema vključuje vgrajen osebni računalnik z operacijskim sistemom Windows in lasersko programsko opremo. Po želji lahko laserski model LAS 28 XLe opremite z vrtljivo osjo (3-čeljustno vpenjalno glavo) za označevanje cilindričnih delov. Na voljo so tudi druge možnosti, kot so stranske konzole za označevanje dolgih delov, pomična os Z, sistemi predalov itd. Izdelano v Nemčiji Nodszntfmspfx Anpown Vlakenski laser 30 W, 20 W ali 50 W • Laserski razred 1 • Valovna dolžina 1064 nm • Velikost območja označevanja 150x150 mm (po želji večje) • Programska oprema za označevanje EZCAD v nemščini / angleščini • po želji: vrtljiva os (3-čeljustna vpenjalna glava) • po želji: digitalni sistem za merjenje višine • po želji: sistem za samodejno ostrenje – sistem za samodejno določanje razdalje do žarišča • po želji: sesalni sistem (vključno z aktivnim ogljikom) • Pilotni laser (preprost predogled, predogled obrisa) • Iskalnik žarišča (enostavna nastavitev žarišča) • Signalna luč za prikaz delovnega stanja • največja višina obdelovanca približno 300 mm • Električno nastavljiva os Z • Vgrajen osebni računalnik z operacijskim sistemom Windows • Nastavljiva višina stojala za zaslon in tipkovnico • Okvir iz aluminijastega profila • Hladi s zrakom • Izjemno velik notranji prostor • Širina vrat približno 700 mm / višina vrat (odprtina): 400 mm • Priključek 230 V • Dimenzije: približno 900 x 800 x 1900 mm (D x Š x V) • Teža: približno 120 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20-3443, vhodna napetost: 400 V, skupna širina: 2.286 mm, skupna dolžina: 11.994 mm, skupna višina: 2.582 mm, temperatura: −80 °C, vrsta vhodnega toka: trifazni, hladilna zmogljivost: 12 kW (16,32 KM), vhodni tok: 63 A, temperatura okolja (min.): −20 °C, vhodna frekvenca: 50 Hz, okoljska temperatura (maks.): 42 °C, Ponujamo mobilno, redundantno hladilno skladišče za nizke temperature v izvedbi kontejnerja, ki je sestavljeno iz predprostora z delovno temperaturo -20 °C in skladiščnega prostora z nastavljivo temperaturo do -80 °C. Tehnični podatki Temperatura skladišča (nastavljiva): do -80 °C Dovoljena temperatura okolja: -20 °C do +42 °C Število hladilnih krogov: 4 Nivo zvočnega tlaka (1 m v prostem polju): 73 dB(A) Hladilni krog – stopnja 1 Hladilno sredstvo: R449A (GWP: 1.397) Število kompresorjev: 2 Izvedba kompresorjev: polhermetični batni kompresorji, regulirani s frekvenco Hladilni krog – stopnja 2 Hladilno sredstvo: R508B (GWP: 13.396) Število kompresorjev: 2 Izvedba kompresorjev: polhermetični batni kompresorji, regulirani s frekvenco Kondenzator Število kondenzatorjev (stopnja 1): 2 Oddana toplotna moč na kondenzator: 35,0 kW Ventilatorji na kondenzator: 2 Vrsta ventilatorja: EC-ventilatorji, regulirani s hitrostjo Nominalni pretok zraka na kondenzator: 8.800 m³/h Električni podatki Poraba moči v delovni točki (skupna): 24,2 kW Poraba toka v delovni točki (skupna): 43,9 A Priporočena zaščita: 2 × 63 A (CEE-priključek, redundantna) Napajanje: 400 V / 50 Hz / 3 f + N Upravljanje PLC: Siemens S7-1214C x 2 Nadzorni panel: Siemens TP900 Comfort, 9 palcev, 16,7 milijona barv x 2 Jeziki vmesnika: nemščina in angleščina Ogled Nodpfjzg Dtxex Anpown Ogled naprave je možen kadarkoli v naši proizvodnji po predhodnem dogovoru. Po želji lahko napravo vključimo med ogledom, da se prepričate o njeni funkciji in učinkovitosti.

Stanje: novo, DBK-1250 – rotacijski sit za obdelavo velikih količin odpadkov (35 m³/h) Nodpfezka Duox Anpewn Robustna konstrukcija za neprekinjeno delovanje pri veliki obremenitvi; opremljen s prilagodljivo enoto za dovajanje materiala. Tehnični podatki Tip: Rotacijski sit – DBK-1250 Potrebna moč: 14 kW/A Napetost: 380 V / 50 Hz Motor rotacijskega sita: 2,2 kW Motor notranjega transportnega traku: 1,1 kW Motor izhodnega traku: 1 kW Motor za čiščenje sita: 1 kW Motor dovodnega traku: 1,1 kW Motor hidravlične enote: 1,1 kW Lastnosti in zmogljivost: Teža (v delovnem stanju): 3.450 kg Dolžina: 6.575 mm Širina (za transport): 2.510 mm Širina (v delovnem stanju): 5.855 mm Višina: 2.470 mm Teža: 3.400 kg Prostornina rezervoarja za gorivo: 50 l Dimenzije rotacijskega sita: 1,2 × 4 m Hitrost vrtenja rotacijskega sita: 0–0,5 vrt/min Velikost odprtine mreže: standardno 20 × 20 mm Na zahtevo prilagodljivo Prostornina lijaka (skupna): 1,8 m³ Širina dovodnega traku: 620 mm Hitrost dovodnega traku: 5–10 m/min; hitrost izhoda (pod rešetko): 1 m/s Hitrost izhoda (nad rešetko): 0,63 m/s Širina izhodnega traku: 500 mm Maks. hitrost: 3 km/h Maks. velikost vhodnega materiala: 200 × 200 mm Obdelan material (vhod): 0–20 mm Proizvodnja: 0–35 m³/h

Stanje: zelo dobro (rabljeno), Rabljen posod iz nerjavečega jekla z električnim ogrevanjem / transportni kontejner Zadnja uporaba: kemikalije Številka izdelka: 10907 Prostornina: 1000 L Tip: stoječa posoda v okvirju iz nerjavečega jekla Material (ki je v stiku z medijem): 1.4301 / AISI304 Izvedba: z električnim grelcem Dno: ukrivljeno Zgornje dno: ukrivljeno Delovni tlak glede na ploščico: 0,30 bar Dimenzije posode: Celotna širina: 1200 mm Celotna dolžina: 1200 mm Celotna višina: 1675 mm Razdalja od izliva do dna: 240 mm Materiali: Notranjost: 1.4301 / AISI 304 Okvir: nerjaveče jeklo Oprema: Nedpfxsz Ixgyo Anpown Ploščica: da Izlivi ventil: diskovni ventil Premer izliva: DN50 Električni grelni sistem Prazna teža: 433 kg

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), vhodna napetost: 400 V, številka stroja/vozila: 3365, BVL Yukon DAK-2 BL 500/400/4000, leto izdelave 2019, št. stroja 3365. Dvozonska, neprekinjena pralna naprava za vodno čiščenje in razmaščevanje gredi, sledi sušenje. Dve pralni coni sta ločeni s pregradno ploščo in imata vsaka svojo posodo za pranje. Na vsaki coni se deli očistijo in nato posušijo. Naprava je zasnovana za integracijo v proizvodno linijo s paletnim transportnim sistemom, ki ga zagotavlja kupec. Tehnični podatki: - Dve pralni posodi, vsaka s prostornino 1.000 l - Električni grelec posode: 2 x 45 kW - Dokumentiran obseg temperature pranja: 45-60 °C - Pralne črpalke: 2 x 4,0 kW; tlak curka: 3,0 bar - Grobi filter: 1 mm; vrečasti filter: 50 µm na vsak pralni krog - Uporabna dolžina: 250 mm; uporabna širina: 2 x 250 mm; uporabna višina: 400 mm - Nadzor: Siemens SIMATIC S7-1500, CPU 1513-1 PN - Upravljalna plošča: Siemens TP700 Comfort - Napetost: 3 x 400 V, N+PE, 50 Hz Nodpfx Anoz A Eidjpown Oprema: - Sušenje brez gretja s stranskim kanalnim puhalom in izpihovalnim ventilatorjem na vsaki coni - Samodejno doziranje čistila in nadzor koncentracije prek Libelle Cleaner Control - Kondenzator pare - Samodejno čiščenje izpihovalne cone - Sistem šob z hitrim spojnikom - Štiri okna za opazovanje z notranjo osvetlitvijo - Upravljalna konzola na nosilnem ročnem sistemu Dimenzije za transport/vgradnjo glede na tloris: 4.000 x 2.000 x 2.938 mm (D x Š x V). Na voljo je tehnična dokumentacija, vključno z navodilom za uporabo, tlorisom, električnimi in pnevmatskimi shemami, dokumentacijo za vzdrževanje, seznami rezervnih delov in arhivom projektov PLC. Lokacija: Waldmohr. Stanje: zelo dobro (rabljeno). Cena na zahtevo. Notranja referenčna številka: 781461. Tehnični podatki v skladu z razpoložljivo dokumentacijo proizvajalca.

Leto izdelave: 2009, stanje: rabljeno, Kampwerth PS – kompresor s vijačnim gnetilom – leto izdelave 2009 Nedpsz Ht Iiefx Anpjwn Rabljen kompresor s vijačnim gnetilom podjetja Kampwerth Umwelttechnik za stiskanje odpadkov in recikliranih materialov. Tehnični podatki: Proizvajalec: Kampwerth Umwelttechnik Model: PS Leto izdelave: 2009 Napetost: 400 V Frekvenca: 50 Hz Poraba električnega toka: približno 22,5 A Stopnja zaščite: IP65 Teža: približno 1.800 kg Kompresor s vijačnim gnetilom je primeren za zmanjšanje volumna in stiskanje ustreznih vrst odpadkov in recikliranih materialov. Ogled je možen po dogovoru. Vse informacije so podane brez garancije. Pridržana pravica do spremembe.