Kraussmaffei Km 130-1000 Cx nakup rabljenega (22.793)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krauss Maffei Injection Moulding Machine KM 250-1900 C1 Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of production: 2007 Clamping system: fully hydraulic Control system: MC4 with colour monitor, control panel and floppy disk drive 🔹 Clamping Unit Clamping force: 2500 kN Opening force: 160 kN Kjdexak Ucjpfx Al Nslr Platen traverse force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Mould height: 330 mm Open daylight: 1150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1778 bar Shot volume: 1047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (increased speed) 🔹 Electro-Hydraulic Equipment Pump motor power: 55 kW Cylinder heaters: 30 kW (6 zones) Dry cycles per Euromap: 1400 1/h Oil tank: 720 l 🔹 Dimensions and Weight Net weight (with control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Stanje: dober (rabljeno), Leto izdelave: 1999, Krauss Maffei Injection Moulding Machine KM 420 - 2700 C1 • Year of manufacture: 1999 Technical Data Clamping Unit • Clamping force: 4200 kN • Max. mould opening force: 250 kN • Moving platen force (opening): 124 kN • Moving platen force (closing): 102 kN • Dimensions of mounting platens (W x H): 1270 mm x 1200 mm • Tie bar spacing (W x H): 800 mm x 800 mm • Mould opening stroke: 1020 mm • Minimum mould height: 380 mm • Maximum daylight: 1400 mm • Ejector force (forward / backward): 95 / 48 kN Injection Unit • Screw diameter: 80 mm • L/D ratio: 20 • Injection pressure: 1829 bar • Shot volume: 1433 cm³ • Shot weight (PS): 1304 g • Injection rate: 513 cm³/s • Maximum plasticising rate: 108 g/s • Nozzle pressure: 173 kN Electrical and Hydraulic Installation • Pump motor power: 75 kW • Installed heating capacity: 36 kW Klsdjwqd Aqopfx Al Ner • Number of cylinder heating zones: 7 • Oil tank capacity: 1075 l Dimensions and Weight • Machine dimensions (L x W x H): approx. 7.06 m x 2.33 m x 2.51 m • Total machine weight: 20,500 kg

Stanje: novo, Leto izdelave: 2025, Injection Moulding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. MC6 control system based on an industrial PC using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing System Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle. Nozzle radius: 25 mm Nozzle opening: 9 mm Technical Specifications (standard version) Clamping Unit Clamping force: 6500 kN Opening force: 455 kN Platen dimensions (H x V): 1660 x 1530 mm Tie-bar spacing (H x V): 1200 x 1020 mm Opening stroke: 1450 mm Mould height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force, forward/back: 140 / 70 kN Injection Unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Shot volume: 3367 cm³ Shot weight (PS): 2391 g Injection speed: 110 mm/s Injection capacity: 780 cm³/s Screw speed (standard): 147 rpm Plasticizing rate (at standard speed): 102 g/s Klodoxdd U Djpfx Al Ner Nozzle contact force: 166 kN Electro-hydraulic System Pump motor power: 97 kW Installed heater power: 54 kW Number of barrel heating zones: 7 Dry cycle time (per Euromap 6): 3.3 s / 840 mm Dry cycle time (KM standard): 2.9 s / 600 mm Oil tank capacity: 1435 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Part placement on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z axis (crosswise): 2500 mm, servomotor Dimensions and Weight Net weight (with control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine Year of manufacture: 2011 LRX 500 Robot Z-axis: 4000 mm X-axis: 1500 mm Y-axis: 1250/1250 mm Hydraulic-mechanical, two-platen clamping system with 4 pressure pads and 4 locking units on the movable platen. PV - injection unit control adjustment. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit: Complete plasticising unit for thermoplastics with a 135 mm screw diameter, non-return valve and open nozzle. Nozzle radius: 25 mm, nozzle orifice: 9 mm TECHNICAL DATA Clamping Unit - Clamping force: 8,500 kN - Mould opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar clearance (H x V): 1140 x 1140 mm - Mould opening stroke: 1600 mm - Mould height (min-max): 500 - 1100 mm - Daylight: 2100 mm - Ejector stroke: 300 mm Kodpfx Alswqdyij Nelr - Ejector force: 200 / 100 kN Injection Unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation space (L x W x H): 11.72 x 2.92 x 2.71 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General Description: Hydro-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 control units on the movable platen. The machine is equipped with a PV (proportional valve) injection unit regulation system. Control is provided by a modern MC6 system, based on an industrial PC with real-time Ethernet technology. The control panel features an integrated 19-inch touchscreen with a colour display, LED backlighting, and full process visualisation via ProcessDesigner. Plasticising unit: Complete system for thermoplastics processing Wear-resistant (abrasion-proof) version Screw diameter: 105 mm Shut-off valve and open nozzle Technical specifications: Clamping unit: Clamping force: 9,000 kN Mould opening force (pressure pads): 630 kN Platen dimensions (W x H): 1660 x 1530 mm Tie bar spacing: 1180 x 1000 mm Max. mould opening stroke: 1600 mm Mould height (min – max): 500 – 1100 mm Maximum opening stroke: 2100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1778 bar Injection volume: 4546 cm³ Shot weight (for PS): 3228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle touch force: 166 kN Electrical-hydraulic equipment: Pump motor power: 120 kW Kledowyxbgepfx Al Ner Heater power: 59 kW Number of barrel heating zones: 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight: Net weight (incl. control cabinet): 40 tonnes Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Krauss Maffei KM 2300 - 12000 MC Injection Moulding Machine Year: 2004 Control system: MC 4 Operating hours: 93,900 Clamping Unit Clamping force: 23,000 kN Maximum mould opening force: 1,420 kN Moving platen force - Opening: 227 kN Moving platen force - Closing: 203 kN Platen size (H x V): 2,830 mm x 2,400 mm Tie-bar spacing (H x V): 2,000 mm x 1,600 mm Mould opening stroke: 2,600 mm Minimum mould height: 1,100 mm Maximum mould height: 1,800 mm Maximum daylight: 3,700 mm Hydraulic ejector stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection Unit Screw diameter: 135 mm Ls/D ratio: 23 Injection pressure: 1,389 bar Shot volume: 8,588 ccm Injection weight, PS: 7,815 g Injection rate: 1,019 ccm/s Screw speed: 113 rpm Max. plasticising rate: 191 g/s Nozzle pressure: 241 kN Electrical and Hydraulic Equipment Pump drive capacity: 132 kW Installed heating power: 997 kW Adjustable barrel heating zones: 7 Drying cycles per hour: 350 Tank capacity: 2,500 litres Dimensions and Weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143,000 kg Max. mould weight: 62,000 kg Kljdpfx Alowq Ed Ao Nsr LRX 1000 Robot X-axis: 2,000 mm Y-axis: 3,000 mm Z-axis: 5,000 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Max. mould opening force: 160 kN Moving platen traverse force – opening: 86 kN Moving platen traverse force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Clearance between tie bars (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight between platens: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Injection weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Max. plasticising rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of heating zones (barrel): 6 Oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Max. mould weight: 3,430 kg Accessories and additional equipment: Oil tank Anti-vibration pads 3 × core pullers 8 × hot runner control zones 2 × air valves Robot interface conforming to Euromap 67 Additional information: Machine located in Poland Ready for collection Ksdpew A N Hfofx Al Nolr Possibility to organise loading, transport, installation and commissioning

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, INJECTION MOULDING MACHINE KRAUSS MAFFEI KM 300-1900 C1 Year of manufacture: 2007 Included: Wittmann W 731 Robot General Description We offer a used injection moulding machine from the renowned brand Krauss Maffei, model KM 300-1900 C1, equipped with a Wittmann W 731 robot. The machine features a fully hydraulic clamping system as well as a modern MC4 control system with a colour monitor, integrated operator panel, and floppy disk station. Plasticising Unit Complete plasticising unit for thermoplastics, with wear-resistant version, equipped with a 60 mm screw, check valve, and open nozzle. Technical Data Clamping Unit Clamping force: 3000 kN Mould opening force: 160 kN Moving platen force: – Opening: 86 kN – Closing: 68 kN Platen dimensions (H x W): 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Platen opening stroke: 1150 mm Ejector stroke: 200 mm Ejector force: 58 / 28 kN Injection Unit Screw diameter: 60 mm Injection pressure: 2420 bar Injection volume: 769 cm³ Shot weight (PS): 700 g Screw speed (standard/option): 218 / 306 rpm Injection rate: 294 cm³/s Kedpfx Asw Du Htel Njlr Throughput at: – standard speed: 55 g/s – increased speed: 78 g/s Electro-hydraulic System Pump motor power: 55 kW Heater capacity: 30 kW Number of barrel heating zones: 6 Dry cycle rate (Euromap): 1,350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Net weight with control cabinet: 14.2 t Overall dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Stanje: dober (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei robot Year of manufacture: 2011 Ksdpfxjtrya Rj Al Njlr Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit stroke control. MC 5 control system with colour monitor, integrated control panel, and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with screw diameter 135 mm, with non-return valve and open nozzle. Nozzle radius 25 mm, nozzle orifice 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8500 kN - Opening force: 560 kN - Mounting platen dimensions (h x v): 1600 x 1600 mm - Tie bar clearance (h x v): 1140 x 1140 mm - Opening stroke: 1600 mm - Mould height (min-max): 500 - 1100 mm - Daylight: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1389 bar - Shot volume: 8588 cm³ - Shot weight for PS: 6098 g - Injection rate: 1414 cm³/s Electro-hydraulic equipment - Rated motor power (pump): 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation space (L x W x H): 11.72 x 2.92 x 2.71 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Molding Machine KM 850-12000 MX With Krauss Maffei LRX 500 Robot Year of manufacture – 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – injection unit adjustment. MC 5 control system with color monitor, integrated control panel, and USB data carrier. Plasticizing Unit Complete plasticizing unit for thermoplastics with 135 mm screw diameter, shut-off nozzle and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Clamping Unit - Clamping force: kN 8500 - Mold opening force: kN 560 - Platen dimensions (H x V): mm 1600 x 1600 - Tie bar spacing (H x V): mm 1140 x 1140 - Mold opening stroke: mm 1600 - Mold height (min-max): mm 500 - 1100 - Daylight: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Injection Unit - Screw diameter: mm 135 - Injection pressure: bar 1389 - Shot volume: cm³ 8588 - Shot weight for PS: g 6098 - Injection rate: cm³/s 1414 Electro-hydraulic Equipment - Pump motor rated power: kW 132 - Dry cycle time as per Euromap 6: 1/h 965 - Oil tank capacity: l 2440 Weight and Dimensions - Net weight with control cabinet: t 49 Klodjwkhmmjpfx Al Njr - Installation dimensions (L x W x H): m 11.72 x 2.92 x 2.71

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Krauss Maffei KM 420-2700 C2 Injection Moulding Machine Year of manufacture: 2002 Machine Description The Krauss Maffei KM 420-2700 C2 injection moulding machine is a robust and precise machine with a high clamping force of 4200 kN, designed for processing thermoplastic materials. Equipped with a reliable hydraulic system and a precise control system, it ensures stable and repeatable operation in demanding production environments. Technical Specifications Clamping Unit Parameter Unit Value Clamping force kN 4200 Max. mould opening force kN 250 Movable platen traverse force – opening kN 124 Klodpfx Asxq Akkjl Nor Movable platen traverse force – closing kN 102 Platen dimensions (H × L) mm 1270 × 1200 Tie bar clearance (H × L) mm 800 × 800 Mould opening stroke mm 1020 Minimum mould height mm 380 Maximum daylight mm 1400 Ejector force (forward / backward) kN 95 / 48 Max. mould weight kg 6700 Injection Unit Parameter Unit Value Screw diameter mm 70 L/D ratio - 20 Injection pressure bar 1829 Shot volume cm³ 1097 Shot weight (PS) g 998 Injection rate cm³/s 513 Max. plasticizing rate g/s 108 Nozzle pressure kN 173 Electrical and Hydraulic Equipment Parameter Unit Value Rated pump motor power kW 75 Installed heating power kW 36 Number of heating zones (barrel) - 7 Oil tank capacity l 1075 Dimensions and Weight Parameter Unit Value Machine dimensions (L × W × H) m 7.06 × 2.33 × 2.51 Total machine weight kg 20,500

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 100 mm, tlak vbrizgavanja: 1.742 letvica, minimalna višina orodja: 600 mm, odmični hod: 1.150 mm, širina plošče: 1.440 mm, višina plošče: 1.490 mm, Injection moulding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mould opening force: 346 kN Sliding plate opening force: 169 kN Sliding plate closing force: 144 kN Mounting platen dimensions: 1,490 mm x 1,440 mm Clear space between tie-bars: 1,000 mm x 930 mm Mould opening stroke: 1,150 mm Minimum mould height: 600 mm Injection unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Klodpfewp Si Nex Al Nor Injection rate: 649 cm³/s Wittmann W643 robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm C-axis servo: +/- 90° A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Electrical and hydraulic equipment Rated pump motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight including control cabinet: 39.5 t Operating hours: 70,000 h MAINTENANCE All hydraulic hoses replaced 12/24 Last inspection by Krauss Maffei: 24/03 New (hydraulic) screw drive: 25/01 New check valve: 01/25 EQUIPMENT - Fully hydraulic clamping system - MC 4 control system with colour monitor and integrated operator panel - Built-in floppy disk drive - Complete plasticising system for thermoplastics with a 100 mm screw diameter, check valve, and open nozzle

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 90 mm, razmak između stupova: 1.000 mm, tlak vbrizgavanja: 1.742 letvica, odmični hod: 2.000 mm, TEHNIČNE PODROBNOSTI Zapiralna sila: 8.000 kN Največja sila odpiranja orodja: 356 kN Potisna sila gibljive odprte plošče: 98 kN Sila gibljive zapiralne plošče: 92 kN Dimenzije plošč (V x Š): 1.610 mm x 1.530 mm Razmak stebrov (V x Š): 1.120 mm x 1.000 mm Hod odpiranja orodja: 1.400 mm Minimalna višina orodja: 600 mm Maksimalna odprtina: 2.000 mm Hod hidravličnega izmetalca: 250 mm Premer polža: 90 mm L/D razmerje: 23 Vbrizgalni pritisk: 1.742 bar Vbrizgalni volumen: 2.863 cm³ Teža brizga (PS): 2.605 g PODROBNOSTI STROJA Dimenzije in teža Dimenzije (D x Š x V): 10.500 x 2.860 x 2.890 mm Kjdpfxsxup Nns Al Njlr Teža: 43.000 kg Obratovalne ure: 70.000 h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 9.500 kN, premer vijaka: 120 mm, hod izmetalca: 300 mm, odmični hod: 1.900 mm, TEHNIČNE PODROBNOSTI Zapiralna sila: 9.500 kN Odpiralna sila: 665 kN Razdalja med stebri: 1.400 x 1.150 mm Montažne plošče: 1.960 x 1.710 mm Odpiralni hod: 1.900 mm Minimalna višina orodja: 500 mm Maksimalna višina orodja: 1.200 mm Maksimalna odprtina: 2.400 mm Hod izmetalca: 300 mm Visoko zmogljiv polž HPS-UN, premer: 120 mm Polmer šobe: 30 mm Premer odprtine šobe: 12 mm Premer polža: 120 mm Teža brizga (HDPE): 5.420 g Volumen brizga: 7.634 cm³ Specifični vbrizgovalni tlak: 2.257 bar PODROBNOSTI O STROJU Kledpoxup Sijfx Al Njr Dimenzije & Teža Dimenzije (D x Š x V): 12.770 x 3.420 x 2.750 mm Teža stroja: 61,5 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, tlak vbrizgavanja: 2.389 letvica, hod izmetalca: 135 mm, odmični hod: 1.825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate dimensions (H x V): 1,520 x 1,470 mm Daylight opening (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Maximum opening width: 1,825 mm Klodpfx Aleycqc Ts Njr Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw rotational speed: 218 rpm Plasticizing capacity: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Floor space (approx.): 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated pump drive power: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 FEATURES Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulator 2 x hydraulic core pulls on moving platen 2 x hydraulic core pulls on fixed platen Robot interface according to EUROMAP 67

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.500 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force 8500 kN Maximum mold opening force 560 kN Moving platen opening force 153 kN Moving platen closing force 117 kN Mounting platen (h x v) 1600 x 1600 mm Clearance between tie-bars (h x v) 1140 x 1140 mm Mold opening stroke 1600 mm Min./max. mold installation height 500 / 1100 mm Max. opening distance 2100 mm Ejector stroke 300 mm Ejector force forward/backward 200/100 kN Injection unit: Screw diameter 95 mm L/D ratio 23 Injection pressure 1795 bar Shot volume 3367 cm³ Shot weight (PS) 3064 g Injection flow rate 690 cm³/s Kedpsyb Sx Hofx Al Nolr Screw speed 116 rpm Plasticising rate 104 g/s Nozzle contact force 166 kN Electrohydraulic equipment: Pump motor rated power 90 kW Installed heating power 53 kW Number of temperature control zones (barrel heating) 7 Oil capacity 1500 L Dimensions and weights: Required space approx. 11.00 x 3.00 x 2.60 m Total weight 43000 kg Max. mold weight 12200 kg Accessories: - Vibration mounts Additional features: - 1 x air valve - 4 x hydraulic core pulls - 12 x hydraulic cascades - 2 x 12-fold water manifold - Robot interface according to Euromap 67

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Données techniques : Unité de fermeture : Force de fermeture max. : 8.000 kN Force d’ouverture du moule : 503 kN Course d’ouverture : 1.400 mm Commande CNC Plaque de fixation (H x V) : 1.600 x 1.510 mm Entretoises (H x V) : 1.120 x 1.000 mm Course d’ouverture max. du moule : 1.400 mm Hauteur d’installation moule min. : 600 mm Hauteur d’installation moule max. : 1.100 mm Ouverture maximale : 2.000 mm Course de l’éjecteur : 250 mm Ksdpfxsw Idnto Al Nslr Force d’éjection : 226 / 95 kN Unité d’injection : Volume de dosage théorique : 3.611 ccm Diamètre de la vis : 105 mm Pression d’injection spécifique : 1.580 bar Poids de la dose PS : 3.286 g Volume d’huile : 2.000 l Dimensions machine (L x l x h) : env. 10.150 x 2.660 x 2.400 mm Poids : env. 12,5 t Accessoires : Nombre d’extracteurs de noyaux : 4 8 circuits d’eau chacun Le vendeur décline toute responsabilité pour les erreurs d’écriture ou de transmission de données. La machine est vendue en l’état, selon son âge, aussi bien pour l’aspect que pour la technique et l’usure. Les machines d’occasion sont vendues sans aucune garantie.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Clamping force: 1250 kN Screw diameter: 35 mm Tie bar spacing: 470 mm Shot weight: 142 g Min. mould height: 300 mm Ksdpfx Aewthfuel Nslr Total weight: approx. 6,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 6,500 kN Maximum mold opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Clamping platen (H x V): 1,520 x 1,470 mm Clear daylight (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force (forward/backward): 95 kN Injection unit: Kjdpfxsx Hzzcs Al Njlr Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 cc Shot weight (PS): 3,064 g Injection flow: 690 cc/s Screw rotation speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 50 kW Number of temperature control zones for barrel heating: 7 Dimensions and weights: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Accessories: - Vibration dampers - Krauss Maffei robot LR300 X axis: 1,200 mm, servo-driven Y axis: 1,000/1,000 mm, telescopic, servo-driven Z axis: 3,500 mm, servo-driven C axis: 0 - 90° pneumatic - Conveyor belt - Safety enclosure Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control - 12 hot runner controllers - 2 x hydraulic core pulls on the moving platen (BWAP) - 2 x hydraulic core pulls on the fixed platen (FWAP)

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 103 mm Centre distance: 1,000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Kjdod I A Dhopfx Al Nslr Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2,500 x 1,100 x 1,380 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 130 mm, delovna prostornina: 6.172 cm³, tlak vbrizgavanja: 1,296 letvica, širina plošče: 1.700 mm, višina plošče: 1.704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Max. tool opening force: 346 kN Force to open moving platen: 169 kN Force to close moving platen: 144 kN Clamping platen (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Mould opening stroke: 1,150 mm Minimum mould installation height: 600 mm Maximum daylight: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Stroke volume: 6,172 ccm Shot weight (PS): 5,617 g Injection flow: 1,540 ccm/s Screw speed: 138 rpm Plasticising rate: 238 g/s Nozzle contact force: 246 kN Electrohydraulic Equipment Rated output of pump motor: 132 kW Installed heating capacity: 70 kW Temperature control zones (barrel): 7 MACHINE DETAILS Required floor space approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Klsdpfx Alsx Dbtws Nor EQUIPMENT - Vibration-damping elements - 1 x air valve - 2 x hydraulic core pullers at BFAP - 2 x hydraulic core pullers at FFAP - 8 x hot runner control zones - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Stock No.: 13610 Kljdpfxeub S Ulo Al Nsr Manufacturer: Krauss Maffei Machine type: KM 110 – 390 C2 Year of manufacture: 1998 Operating hours: h Control system: MC3-F Screen language: German Location: D-52249 Eschweiler Clamping unit: Clamping force: 1,100 kN Max. tool opening force: 70 kN Moving platen traverse force (open): 35 kN Moving platen traverse force (close): 28 kN Clamping platen dimensions (h x v): 745 x 770 mm Clearance between tie bars (h x v): 470 x 470 mm Mould opening stroke: 600 mm Min. mould installation height: 300 mm Max. daylight: 900 mm Ejector stroke: 150 mm Ejector force forward/back: 22 / 10 kN Injection unit: Screw diameter: 35 mm L/D ratio: 23 Injection pressure: 2,429 bar Stroke volume: 156 cm³ Shot weight (PS): 142 g Injection flow rate: 123 cm³/s Screw speed: 391 rpm Plasticising rate: 22 g/s Nozzle contact force: 84 kN Electrohydraulic equipment: Pump motor power rating: 18.5 kW Installed heating capacity: 12 kW Cylinder heating control zones: 5 Oil fill: 345 litres Dimensions and weights: Space requirement approx.: 5.00 x 1.60 x 2.20 m Total weight: 6,000 kg Max. mould weight: 1,485 kg Accessories: - Vibration dampers - 6-circuit water manifold Additional equipment: - 2 x air valves - 2 x core pullers - Robot interface as per Euromap 12 - Accumulator - Electrically driven screw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, Clamping Unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Opening width: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit: Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Stroke volume: 1,097 cc Shot weight (PS): 998 g Injection flow rate: 393 cc/s Screw speed: 218 rpm Plasticizing throughput: 83 g/s Nozzle contact force: 173 kN Ksdpfxov Stbmj Al Njlr Electrohydraulic Equipment: Rated power of pump motor: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 Dimensions and Weights: Space requirement (approx.): 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Accessories: Oscillation elements Additional Equipment: - 1 x air valve - 8-way pneumatic cascade control - Accumulator - 2 x hydraulic core pulls on BWAP - 2 x hydraulic core pulls on FWAP - Robot interface according to EUROMAP 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 77.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 5.000 kN, premer vijaka: 100 mm, Clamping force 5000 kN Maximum tool opening force 280 kN Moving platen drive force, opening 137 kN Moving platen drive force, closing 136 kN Clamping plate (h x v) 1270 x 1200 mm Clear width (h x v) 900 x 800 mm Mould opening stroke 1170 mm Minimum mould installation height 480 mm Opening width: 1650 mm Ejector stroke 250 mm Ejector force forward/back 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Shot volume 2411 ccm Shot weight (PS) 2194 g Injection flow rate 801 ccm/s Screw speed 189 rpm Plasticising throughput 161 g/s Nozzle contact force 173 kN Electrohydraulic equipment: Rated power of pump motor 90 kW Installed heating capacity 44 kW Temperature control zones, cylinder heating 7 Oil fill 1075 l Dimensions and weights: Space requirement approx. 7.50 x 2.50 x 2.50 m Total weight 27090 kg Max. mould weight 7900 kg Accessories: - Oscillating elements - 2 x 8-circuit water manifold Additional equipment: - 2 x hydraulic core pull on moving platen - 2 x hydraulic core pull on fixed platen Kedpfx Ajwgni Hjl Nslr - Robot interface as per Euromap 12 - 16 x hot runner control zones - 1 x air valve on moving platen

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 58.350 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.000 kN, premer vijaka: 60 mm, Clamping Unit: Clamping force: 3000 kN Kedpfew H Rvijx Al Njlr Maximum mold opening force: 160 kN Moving platen opening force: 86 kN Moving platen closing force: 68 kN Clamping platen size (H x V): 995 x 1050 mm Daylight opening (H x V): 630 x 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum opening width: 1150 mm Ejector stroke: 200 mm Ejector force, forward/backward: 58 kN Injection Unit: Screw diameter: 60 mm L/D ratio: 21 Injection pressure: 2000 bar Shot volume: 679 ccm Shot weight (PS): 618 g Injection flow: 325 ccm/s Screw speed: 259 rpm Plasticizing capacity: 58 g/s Nozzle contact force: 110 kN Electrohydraulic Equipment: Rated pump motor power: 45 kW Installed heating capacity: 23 kW Number of barrel heating control zones: 6 Oil filling capacity: 720 l Dimensions and Weights: Space requirement (approx.): 6.20 x 2.20 x 2.40 m Total weight: 14,370 kg Maximum mold weight: 3,430 kg Accessories: - Oscillating elements - 8-circuit water manifold Additional Equipment: - 1 x air valve - 2 x core pullers - 8 x hot runner controllers - Robot interface according to Euromap 12