Stroj za brizganje

KraussMaffei KM 300 - 1400 C2

Stanje: rabljeno, Leto izdelave: 1992, Overview This blow molding machine was built in 1992 by the French manufacturer Sidel. It is capable of producing up to 4,000 bottles per hour. Technical details Capacity: 4,000 bph 4 cavities Scope of delivery Blow molding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two mold types for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Kwsdpfxenpbhve Abbjt

Stanje: rabljeno, Leto izdelave: 2022, vpenjalna sila: 320 kN, delovna prostornina: 1.068 cm³, tlak vbrizgavanja: 2.120 letvica, skupna masa: 14.000 kg, delovne ure: 2.907 h, premer polžastega transporterja: 65 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Kjdexluk Sjpfx Abbewt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Blagovna znamka: AERMEC Model: NS2352X Hladilna zmogljivost: 500 kW/h Hladilna zmogljivost: 430.000 Kcal/h Uparjalnik: plašč-cevni Kondenzator: aluminijaste lamele – bakrene cevi Vrsta ventilatorja: aksialni Število ventilatorjev: 8 enot Kompresor – blagovna znamka: Bitzer Kompresor – model: CSH8563-90Y-40P Število kompresorjev: 2 enoti Krmilni sistem: Carel Dimenzije (Š × D × V): 2200 × 4800 × 2600 mm Teža: 3224 kg Kwsdpfsl Dqtwsx Abbst

Leto izdelave: 2004, Stanje: delavnici obnovljeno (rabljeno), No. 2054 Kwodsiyx Uzjpfx Abbjt 1 used, partially overhauled and function-tested Alphatec Extruder, type AE-S 75.28 Screw diameter: 75 mm, 28 L/D Drive: 75 kW AC Screw speed up to 80 rpm, adjustable 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – NEW control system – type Inspection possible at our plant in Wuppertal. Further extruders available.

Stanje: rabljeno, Leto izdelave: 1989, obratovalne ure: 74.900 h, vpenjalna sila: 850 kN, premer vijaka: 40 mm, skupna masa: 3.700 kg, Machine No. 145464 Year of manufacture: 1989 Machine weight: 3,700 kg (without oil filling) Clamping force: 850 kN Heating capacity: 8.31 kW Motor: 18.5 kW Total power: 27.2 kW Machine cycles: 7,112,306 Operating hours: 74,900 h Interfaces: Central computer, handling equipment, blow-off, diverter gate, core pull 1 hydraulic, mould temperature control 3 units. Kwodpfx Aor Hrqrjbbot The machine comes with the following accessories, etc.: Complete 50-series thermoplast injection unit, selector valve, hydraulic infeed conveyor (height-adjustable, 3 levels) (integrated in control), external floppy disk drive (original Arburg), documentation and machine service reports from Arburg Service, machine setting CMD training materials (folder), electrical diagram, documents also available in digital form, oil filling (must be pumped into a container prior to transport; pump is available), electronic water manifold.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, obratovalne ure: 33.107 h, Funkcionalnost: popolnoma funkcionalen, Top machine from clean room production (pharmaceutical industry) - with 820 mm rotary table - with GEKU Robot SR 500 ST x=600 y=1400 z=2500 mm Ksdsub Umqspfx Abbewt - only 33,107 operating hours - Safety enclosure / safety cage - Horizontal conveyor belt - Hardly any paint damage / visually almost as new - Fully functional The machine can be inspected under power by appointment. Technical data Manufacturer: Engel Type: V 330H/80V/130 Combi Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions (L/W/H): see drawing Weight: 10,600 kg Functionality: fully functional Condition: excellent Special features Control unit: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2,391 / 2,066 bar Shot volume: 79 / 38 ccm Clamping force: 1,300 kN / 130 t Tie-bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor power: to be advised Heating capacity: to be advised Total power: to be advised The machine is immediately available from our warehouse in Hanover/Germany and has been tested. Extras - Rotary table (820 mm diameter) - Geku Robot SR 500 ST - Safety enclosure / safety cage - CC 200 German/English language GEKU Robot details SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1,400 mm vertical Z-axis: 2,500 mm horizontal A-flip axis: SWM 45 C-axis: servo Gripper: SWS16 B-axis: not available Warranty Warranty until initial commissioning Loading / Shipping Free loading onto buyer's truck or delivery free domicile against reimbursement of transport costs From our warehouse in Hanover / Germany Financing - on request - hire purchase option Price on request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Krauss Maffei Injection Moulding Machine KM 300-1000 C2 Year of manufacture: 2006 Clamping unit: Clamping force: 3000 kN Maximum mould opening force: 160 kN Movable platen shifting force (Opening): 86 kN Movable platen shifting force (Closing): 68 kN Mould platen size (H x V): 995 mm x 1050 mm Tie bar spacing (H x V): 630 mm x 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Injection unit: Screw diameter: 55 mm Ls/D ratio: 20 Injection pressure: 1904 bar Injection volume: 523 ccm Shot weight, PS: 476 g Injection rate: 428 ccm/s Kwodporbhhhefx Abbjt General data: Dimensions (L x W x H) m: 5.97 x 2.04 x 2.36 Weight t: 12.5

Stanje: rabljeno, Stretch blow moulding machine by Etek ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles from PET preform blanks Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries, Model Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power rating: 90 kW Power supply: 400 Volt, 50 Hz Net weight approx. 6,000 kg Kwodpfx Abskucxlsbjt As-new condition

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year of manufacture: 2017) Year: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediately Clamping Unit: Clamping force: 500 tonnes Opening stroke: 1100 mm Tie bar spacing: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Shot volume: 5430 cm³ Maximum injection pressure: 1600 bar General data: Motor power: 98 kW Heating power: 30 kW Clamping unit weight: 31 tonnes Injection unit weight: 15 tonnes Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pulls: 3 Robot interface: No Bimetallic screw/cylinder: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: Ksdpfx Absxvingjbjwt The machine has very low operating hours (565 h) and belongs to the modern, tie-bar-less ENGEL Victory series, ideal for large moulds and high-precision production.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 53.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 206432, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 570 mm, delovna prostornina: 392 cm³, tlak vbrizgavanja: 2.000 letvica, hod izmetalca: 225 mm, skupna masa: 7.450 kg, Oprema: dokumentacija / priročnik, Here we are offering, as an injection moulding machine dealer, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current Note – Tax Information and Advantages for Used Machines: From 01.07.2025, used machines can additionally benefit from a special depreciation allowance of 30% per year for tax purposes. Kodpsw Tt R Isfx Abbewt Manufacturer: Arburg Model: 520C 2000-800 GE Serial Number: 206432 Year of construction: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: Very well maintained – German origin Extras: - Complete thermoplastic cylinder, 50 mm, highly wear-resistant - Screw in HC-design instead of standard - Selogica direct control system - Hydraulic unit with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip extended 50 mm - Band heater for open nozzle - Band heater for extended nozzle tip - Central clamping platen set 570, Ø 125 mm - 2 ejector air blow-off units with pressure regulator - Connection for air blow-off unit 1 - Selector unit connection - Core puller 1 for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (to EUROMAP 67), 50-pin - Host computer interface ARBURG - Additional power connections: 1 CEE, 1 Schuko - Serial printer interface USB - CompactFlash interface for data storage - Operation authorization via chip card according to EUROMAP 65 - 1 additional heating circuit for nozzle or adapter with socket - Interface for dosing/coloring unit - Free manual cooling circuits - Machine-related cooling circuits regulated - Equipment package: Advanced Monitoring - Equipment package: Extended Movements - Equipment package: Production Control - Equipment package: Optimization/Operator Assistance - Equipment package: Quality Assurance - Equipment package: Documentation Complete documentation included Injection Unit: - Screw diameter: 50 mm - Shot weight: 359 g/PS - Injection pressure: 2000 bar - Shot volume: 392 ccm Clamping Unit: - Clamping force: 200 t / 2000 kN - Tie bar distance: 570 x 570 mm - Mounting platens: 795 x 795 mm - Mold height: 300 mm - Max. platen distance: 950 mm - Opening stroke: 650 mm - Ejector stroke/force: 225 mm / 66 kN - Hydraulic clamping unit Motor output: 22 kW Heating capacity: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hanover, Germany and has been tested. Warranty: Warranty is valid until initial commissioning. Loading/Shipping: Loaded free onto buyer’s truck or delivered free to buyer’s premises (shipping charges apply) Available from our warehouse in Hanover, Germany Information about our offered machines and our company: - We only sell our own machines, acquired from ongoing production, from our Hanover warehouse - All machines offered are tested and checked prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property - All machines offered come from successful companies where maintenance and servicing are standard practice - All offered machines are available for inspection at our warehouse