Kraft Klasični Stružnica nakup rabljenega (3.560)

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Stružnica Weiler Matador VS2, letnik 1992, trivrata glava, hitromenjalni sistem Multifix, zadnja zaščita proti škropljenju, električna zaščita glave. Stroj je v dobrem, delujočem stanju in ga je mogoče po dogovoru predstaviti pod napetostjo. Lredpfx Aox Sqvgeh Usl

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.550 mm, premer struženja nad ležiščem sani: 1.550 mm, premer struženja nad zgornjim sanežem: 1.220 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.600 mm, skupna višina: 1.600 mm, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that match those of the technical and operational documentation of a new machine, complies with the WOT acceptance standards as well as Polish standards, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Order-specific general overhaul, delivery time 3.5 months from placing the order. Lsdpfx Ahev Ab Dqs Uorl Technical data: - Distance between centers / turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost - Rear safety guard along the entire machine length - Inverter including soft-start function and potentiometer for stepless speed control

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6/0049/35449, TECHNICKÝ POPIS STROJA Výška středu: 190 mm Vzdálenost mezi středy: 1250 mm Oběžný průměr nad ložem: 387 mm Oběžný průměr nad suportem: 241 mm Lodpfey Nkwfjx Ah Uorl Průchozí otvor vřetena (max. průměr tyče): 54 mm Upínání vřetene: D1-6 Camlock Kužel ve vřetenové pouzdře & pinole koníku: Morse 4 Šířka lože: 279 mm Celkový posuv příčného suportu: 235 mm Celkový posuv podélného suportu: 120 mm Celkový posuv pinoly koníku: 155 mm Počet otáček vřetene (16 stupňů): 25–2000 ot./min Pohon: klínový řemen a spojky Motor vřetene: 5,6 kW Whitworth závity (45): 2–72 záv./palec Diametrální závity (21): 8–44 DP Metrické stoupání (39): 0,2–14 mm Modulové stoupání (18): 0,3–3,5 modul Podélný posuv na 1 otáčku vřetene: 0,0015–0,040'' Příčný posuv na 1 otáčku vřetene: 0,00075–0,020'' Stroj v metrickém provedení Stroj je vybaven: Newall NMS300 dvouosým odměřovacím systémem (DRO) 3- a 4-čelisťová sklíčidla Rychloupínací držák nástrojů a 3 ks držáků Osvětlení Chladící systém Kryt sklíčidla Zadní ochranný kryt proti rozstřiku chladicí kapaliny

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, izvrtina vretena: 37 mm, premer struženja: 360 mm, širina na sredini: 750 mm, največja hitrost vretena: 3.000 obr/min, Digitalni prikaz Newall, 2 osi Ljdpfsyimzvjx Ah Ujrl Kapaciteta 750x360 mm Vrtina vretena 37 mm Regulator hitrosti vretena, največ 3000 vrt/min

Stanje: zelo dobro (rabljeno), premer struženja nad prečnim suportom: 580 mm, izvrtina vretena: 84 mm, premer struženja: 870 mm, premer struženja nad ležiščem sani: 870 mm, Stružnica Geminis model GE 870, 4000 mm med konicami, premer obdelave nad ležiščem 870 mm, nad prečnim vozičkom 580 mm, nad izvlekom 1100 mm, dolžina izvleka 340 mm, hitrosti 13-1000 obr/min, premer vretenine luknje 84 mm, nameščen trikraki vpenjalni plošček premera 315 mm, štirikraki samostojni vpenjalni plošček premera 800 mm, fiksna luneta, stružnica je na splošno v zelo dobrem stanju. Lredpjy Swmrjfx Ah Ujl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81, lead and feed screw lathe with Heidenhain 3-axis digital readout, from a training workshop Technical Data: • Year of manufacture: 1987, Machine no. 87-674 • Centre height: 165 mm • Centre distance: 750 mm • Spindle speeds: 22 to 2800 rpm • Spindle bore: 40 mm • Short taper spindle nose DIN 55027, size 5 with bayonet lock • Tailstock: Morse taper 3 • Feeds: 0.015 to 0.46 mm/rev • Thread types possible: metric, imperial, module, and diametral pitch • Metric thread pitches: 0.18 to 28 mm • Spindle brake • Weight: approx. 1100 kg • Spindle brake switchable • Dimensions (LxHxW): 1.83 m x 1.29 m x 0.88 m Lrodpfxjym Slws Ah Ujl Accessories and Equipment: • Heidenhain 3-axis digital readout • 3-jaw chuck with wedge bar and 1 set of jaws • Quick-action collet system with collets from 1-29 mm in 0.5 mm increments • Toolholder with 7 pockets • Bed stop • Machine feet • Drill chuck • Revolving centre • Coolant system About the machine: For sale is a used Weiler Condor 81 lathe, year of manufacture 1987, in very good condition. The machine is, of course, fully functional—robust and powerful. Coming from a training workshop, this Weiler has been very well maintained. The Heidenhain 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested by us, and a complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on-site.

Stanje: dober (rabljeno), Leto izdelave: 1973, Funkcionalnost: popolnoma funkcionalen, 1 x univerzalni stružnica L + Z Dormac Doria 230 L 8 T Leto izdelave: 1973 v dobrem stanju. Tehnični podatki: Višina konic: 230 mm (350 mm brez mostu) Razdalja med konicama: 1.600 mm Hitrost vretena: 16 - 1.500 o/min (v 12 stopnjah) Premer vretena: 120 mm Prijem konjička: MK 5 Hod pinole: 240 mm Ljdpfx Aoyvfwljh Usrl Pribor: 3-čeljustni vpenjalni tulec Röhm 320 mm z 2 kompleta čeljusti 1 x 4-pozicijski hitromenjalni sistem Parat s 5 kasetami 1 x vrtalna glava v konjičku 2 x fiksna konica v konjičku Razni stružni noži/držala za vrtalne palice Stroj je možno preizkusiti pod napetostjo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, premer struženja nad prečnim suportom: 210 mm, izvrtina vretena: 40 mm, premer struženja: 330 mm, premer struženja nad ležiščem sani: 330 mm, premer struženja nad zgornjim sanežem: 210 mm, Model: Stružnica z vmesnim oknom (gap bed) Student 2500 Lrsdpfx Ahsy N Upls Usl Obrat prek ležišča: 330 mm Obrat prek zgornjega suportnega vozička: 210 mm Obrat v odprtini (gap): 480 mm Razdalja med konicama: 1000 mm Hitrosti vretena: 40–2500 vrt/min Premer notranje odprtine vretena: 40 mm Motor: 2,2 kW Stroj opremljen z: - Trivojna vpenjalna glava - Collet vpenjalna glava in colleti - Digitalni odčitek - Hitroizmenljiv nosilec orodij z držali Dimenzije: 2130 x 1020 x 1450 mm (višina) Teža: 800 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 196 mm, izvrtina vretena: 42 mm, premer struženja: 350 mm, premer struženja nad ležiščem sani: 350 mm, premer struženja nad zgornjim sanežem: 196 mm, višina središča: 175 mm, stružna dolžina: 650 mm, Model: Multiturn 1000 Krmiljenje: Fanuc Oi-TC Lsdpey N Uk Nofx Ah Usrl Leto: 2007 Serijska številka: N91013 Premer nad posteljo: 350 mm Prehod v utoru: 535 mm Premer nad zgornjim sankom: 196 mm Razdalja med konicama: 650 mm Hitrosti vretena: 1-3500 min⁻¹ (3 območja) Vretenova izvrtina: 42 mm Motor: 7,5 kW Stroj je opremljen z: 150 mm 3-čeljustna glava Duplomatic revolverska glava z 8 pozicijami Nosilci orodij za revolversko glavo Hrbtna konica Črpalka za hladilno tekočino

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout from Training Workshop Lrsdeym Dczopfx Ah Uol Technical Data: >> Year of manufacture: 1990 Machine no. 90-1419 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Spindle brake >> Weight approx. 1100 kg >> Spindle brake engageable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. 3-jaw chuck with wedge bars and 1 set of jaws >> Tool post with 7 tool holders >> Bed stop >> Machine feet >> Keyless drill chuck >> Live centre >> Coolant system About the machine: Offered is a used Weiler Condor B lathe, year of manufacture 1990, in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The Weiler comes from a training workshop and is very well maintained. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, including acceptance protocol for new machine tolerances Technical Data: >> Machine No.: 2268-87 >> Centre height: 180 mm >> Distance between centres: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 Camlock >> Tailstock: MT 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Switchable spindle brake >> Drive power: 2.0/4.0 kW >> Dimensions: length 2.2 m, height 1.5 m, depth 1 m Lrsdpfsymznhox Ah Usl Accessories and Equipment: >> New K&C 3-axis digital readout, 12 months manufacturer’s warranty, with operating manual >> New 200 mm 3-jaw chuck, 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons On request: Covers for lead and feed screws About the machine: Offered here is a Weiler Commodor lead and feed screw lathe, geometrically overhauled. The guides have been reground or newly scraped. Acceptance according to inspection protocol. Painted in 2K glossy white. Accessories such as Multifix and chuck are new. For safety: The machine features a brake motor, electronic spindle guard, and two emergency stops. This is an as-new condition lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely operator-friendly and allows for ground-like surface finishes. Take the opportunity to view and test this machine on site under power and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 140 B Lead and Feed Spindle Lathe, toolroom precision, with NEW K&C 3-axis digital readout! Technical Data: >> Year of manufacture: 1989 Machine no.: 89-140-1471 >> Centre height: 140 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Switchable spindle brake >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and Equipment: >> NEW 3-axis digital readout by K&C, 12-month manufacturer's warranty with operator’s manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference point, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch >> Collet chuck NEW, collet range 3 to 25 mm in 1 mm steps NEW >> 160 mm 3-jaw chuck with 1 set of jaws >> Multifix size A with 2 steel holders >> Face plate >> Bed stop >> Rear wall >> Machine feet >> Electronic spindle guard >> Operating manual For safety: Electronic spindle guard, lead and feed spindle covers, 2 emergency stops, spindle brake, electronic gear cover safety interlock About the machine: Ledpeymdymofx Ah Usrl For sale is a Weiler Praktikant 140 B lead and feed spindle lathe in very good condition. This fine lathe comes from a training workshop. The slides all move smoothly and evenly. The Weiler runs quietly even at high speeds. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take advantage of the opportunity to inspect and test the machine under power on site and see its condition for yourself.

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1324, izvrtina vretena: 42 mm, skupna dolžina: 2.000 mm, skupna širina: 1.000 mm, skupna višina: 1.800 mm, največja hitrost vretena: 2.800 obr/min, hitrost vretena (min.): 22 obr/min, skupna masa: 1.500 kg, WEILER CONDOR B vodilni in pogonski vretenasti stružni stroj - Obratovalna napetost: 380 V Lsdpfx Asyiztieh Uorl - Krmilna napetost: 220 V - Priključna moč: 3 kW - Nazivni tok: 25 A - Frekvenca: 50 Hz - Dolžina med konicami: ca. 700 mm - Višina konice nad ležiščem: 170 mm - Premer struženja nad ležiščem: 340 mm - Višina konice nad suportom: 100 mm - Premer struženja nad suportom: 200 mm Stroj je opremljen z konjičkom, multifix držalom za stružni nož, tip B, ter trikrako glavo proizvajalca RÖHM, premer: 150 mm, dodatno z digitalnim prikazovalnikom proizvajalca ELESTA, tip: VISULESTA 4, vključno z ustrezno delavniško predalno omaro in ustreznimi dodatki k stroju. FCA D-73235 Weilheim Teck - naloženo na tovornjak

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Hauteur de pointe : 180 mm Distance entre pointes : 1000 mm Diamètre de rotation sur le banc : 350 mm Diamètre de rotation sur le chariot transversal : 200 mm Largeur du banc : 255 mm Alésage de broche : 36,5 mm Nez de broche DIN 55027 : Taille 5 Plage de vitesses, 14 paliers : 28 – 2500 tr/min Ljdpfx Aeyud Itoh Ujrl Avances, 9 longitudinale : 0,04 – 0,4 mm/tr Avances, 9 transversale : 0,02 – 0,2 mm/tr 38 Filetages métriques : 0,2 – 18 mm 35 Filetages Whitworth : 76 – 2" 31 Filetages module : 0,4 – 13,5 module 25 Filetages diametral pitch : 36 – 2,6 pitch Cône de la contre-pointe : CM 4 Puissance du moteur : 3 kW Dimensions de la machine (L x l x H) : 2350 x 850 x 1800 mm Poids : 1300 kg Accessoires / Caractéristiques particulières : • Affichage digital 2 axes EASSON ES-8A • Mandrin 3 mors • Porte-outils à changement rapide “Multifix” taille B • Protection du mandrin, rabattable, avec sécurité électrique • Installation de liquide de refroidissement Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Allemagne

Stanje: zelo dobro (rabljeno), TOS SN500 SA 1500 mm Digitalni Orodje Lredpjy Auydefx Ah Uol

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout Heidenhain – In Excellent Condition!!! Technical Data: >> Year of manufacture: 1991, Machine No. 3140 >> Centre height: 180 mm >> Centre distance: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55027 Size 6 with bayonet lock >> Tailstock MT 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.35 to 12 mm >> Weight: approx. 1,500 kg >> Spindle brake can be engaged >> Motor power: 2.0/4.0 kW >> Dimensions (LxHxW): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis digital readout by Heidenhain >> 200 mm 3-jaw chuck, 2 sets of jaws >> Multifix size B with 3 tool holders >> Drill chuck, live centre >> Bed stop >> Machine feet Lodpfx Aeylh Nceh Ujrl About the Machine: For sale is a Weiler Commodor lathe in very good, fully functional condition. The machine comes from a state-owned facility where it saw very little use. The Commodor is one of the largest manual lathes produced by Weiler – robust and high-performance. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested by us; a complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our facility.

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 160 mm, izvrtina vretena: 36 mm, premer struženja: 300 mm, višina središča: 150 mm, širina na sredini: 500 mm, skupna dolžina: 1.500 mm, skupna širina: 800 mm, skupna višina: 1.300 mm, največja hitrost vretena: 3.550 obr/min, hitrost vretena (min.): 15 obr/min, skupna masa: 1.000 kg, Konvencionalni precizni stružni stroj z vpenjalno napravo za klešče, višina konic 150 mm, razdalja med konicama 500 mm, premer izvrtine Ø 36 mm, 18 hitrosti vrtenja 15 - 3550 min⁻¹, motor 3 kW, oprema: naprava za hlajenje, vpenjalna naprava za klešče, 3-čeljustna glava, vrtalna glava, stružni konjiček, hitromenjalni držalo RAPID s 5 vložki, strojna svetilka, vzdolžni prislon, mere 150x80x130 cm, teža ca. 1000 kg. Lredpfox Urmlox Ah Uel

Stanje: rabljeno, izvrtina vretena: 51 mm, premer nihanja nad prečnim premičnikom: 300 mm, največja hitrost vrtenja: 2.500 obr/min, premer trikrake glave: 300 mm, Rabljeni stružnica Znamka: Amutio Cazeneuve Model: HB 575 Razdalja med konicama: 1.000 mm Premer nad ležiščem: 575 mm Premer nad vozičkom: 525 mm Lredpsyzrhcjfx Ah Uol Premer nad prečnim vozičkom: 300 mm Premer preboja vretena: 51 mm Hitrosti: 32–2500 o/min Moč: 10 kW Širina ležišča: 400 mm Vključuje: - 300 mm vpenjalna plošča z več kompleti čeljusti - Zaprta luneta - Hitro menjajoča glava z 3 držali za orodja - Digitalni prikazovalnik Aurki (2 osi) - 2 vrtljiva centra - Pladenj s sistemom za hlajenje

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, premer struženja nad prečnim suportom: 100 mm, premer struženja: 440 mm, višina središča: 220 mm, največja hitrost vretena: 1.600 obr/min, hitrost vretena (min.): 55 obr/min, Aucune mise à prix minimale - vente garantie au plus offrant ! La soumission d'une enchère engage à retirer dans le délai du 04.05.26 au 07.05.26. DÉTAILS TECHNIQUES Diamètre de tournage au-dessus du banc : 440 mm Diamètre de tournage au-dessus du chariot : 200 mm Plage de vitesse de broche : 55 - 1 600 tr/min Passage de broche : 58 mm Distance entre pointes : 500 mm Hauteur de pointe au-dessus du banc : 220 mm Hauteur de pointe au-dessus du chariot : 100 mm DÉTAILS DE LA MACHINE Dimensions & poids Dimensions (L x l x H) : 2 700 x 1 500 x 1 700 mm Lsdpfx Ahoyr Rhus Uerl Poids de la machine : 2 000 kg ÉQUIPEMENTS Contre-pointe Porte-outil Multifix Mandrin 3 mors (diamètre : 200 mm) Chariot d’atelier Porte-outil Multifix, type BD 25120 Porte-outil Multifix, type BH 32130 Pointes Filières Plaquettes d’indexables diverses Outils de tournage Mors Accessoires de filetage Référence externe : Lot 81

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, GDW 350 CNC CNC Lathe GDW 350 CNC with Fanuc Oi Mate Control Year of manufacture 2009, very good original condition Ljdpfx Ahsyxfczs Ujrl The machine comes from the custom engineering division of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2009 GDW 350 CNC TECHNICAL DATA Swing over bed: 350 mm Swing over cross slide: 190 mm Distance between centers: 400 mm Spindle bore: 58 mm Drive power: 7.5 kW Speed range: 30–6000 rpm Special Features: • Linear guideways on all axes • Direct path measuring system • Centrally mounted ball screw • Removable chip tray • Excellent chip disposal due to slant bed design • High safety standard • Modern control technology • Overload clutches on all feed axes • 8-position turret for short tool change times • Washable chip tray About the machine: Offered here is a GDW 350 CNC lathe with Fanuc Oi Mate control, year of manufacture 2009. This lathe is in very good original condition. It comes from a shop where it was only occasionally used for custom manufacturing. The control is very easy to use. The guideways are regularly lubricated by the central lubrication system. The GDW 350 CNC has been mechanically and electrically tested by us. Take the opportunity to inspect and test the GDW 350 CNC under power at our facility. Further lathes from renowned manufacturers can be found on our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, - Premer struženja nad posteljo [mm]: - 1000 - Premer struženja nad podporo [mm]: - 630 - Premer struženja v mostnem izrezu [mm]: - 1230 - Vretenova odprtina [mm]: - 120 - Razdalja med konicami [mm]: - 2000 - Območje hitrosti vrtenja [vrt/min]: - 5 ÷ 500 - Največja teža obdelovanca v vpenjalni glavi: 1300 kg Lredpfjytnt Dex Ah Uel - Teža stroja: 10000 kg

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: G70303, SPECIFIKACIJE STROJA Višina sredin: 195 mm Obrat nad posteljo: 400 mm Obrat nad prečnim suportom: 246 mm Obrat v izrezu: 585 mm Širina pred čelno ploščo: 16 mm Dolžina med središči: 1250 mm Hitrosti vretena (16): 25-2000 min⁻¹ Priključek vretena: (Camlock) D1-6 Premer vretena: 54 mm Moč motorja vretena: 7,5 kW Širina preko vodil: 318 mm Pomik prečnega suportna: 250 mm Pomik zgornjega suportna: 130 mm Lodpfx Ahjy Hh Ivj Usrl Pomik tulec konjička: 178 mm Konus v tulec konjička: št. 5 MT Približna teža: 1800 kg Stroj v metrični izvedbi STROJ OPREMLJEN Z Newall 2-osni DRO sistem 3-čeljustna vpenjalna glava Hitromenjalni nosilec orodja in 3 držala orodja Fiksna podpora Zaščita vpenjalne glave Hladilni sistem Zadnja zaščita pred brizganjem

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 267 mm, izvrtina vretena: 76 mm, višina središča: 228 mm, širina na sredini: 1.500 mm, poteza s peresom: 229 mm, premer tulec: 75 mm, skupna dolžina: 3.030 mm, skupna širina: 1.200 mm, skupna višina: 2.000 mm, največja hitrost vrtenja: 1.600 obr/min, vrtljajska hitrost (min.): 20 obr/min, skupna masa: 2.300 kg, Konvencionalni stružnica, višina konic 228 mm, razdalja med konicama 1500 mm, izvrtina Ø 76 mm, 16 hitrosti vrtenja 20 - 1600 obr/min, motor 9,3 kW, Camlock 8'', dimenzije 310x120x200 cm, teža pribl. 2300 kg; Oprema: pnevmatska trivrata glava SCHUNK ROTA Ø 315 mm, trivrata glava Ø 315 mm, vrtljivi konic, hitrozamenljivi držalo za orodje PARAT z različnimi vložki, različne vpenjalne čeljusti, vpenjalna glava za vrtanje, fiksna luneta, strojna svetilka, hladilna naprava, navodila za uporabo, omara. Lrjdpfsypud Usx Ah Uol

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with new 3-axis digital readout and accessories. Original paintwork. Machine no. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centres: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose DIN 55027-5 with bayonet locking - Tailstock taper: MT 3 - Feeds from 0.016 to 0.5 mm/rev - Capable of cutting metric, inch, module and diametral pitch threads - Metric thread pitch from 0.18 to 28 mm - Weight approx. 1100 kg - Switchable spindle brake - Required space (LxWxH): 183 x 88 x 129 cm Accessories and equipment: - 3-jaw steel chuck (Rhom) - New collet set 5C 1/28mm, increments of 0.5mm, with new drawbar - New drill chuck 1/13mm - Multifix toolpost with 4 steel holders - Bed stop - New live center - Change gears - Face plate - Coolant system - Chip guard Lrsdpfx Aoyuyrujh Usl - Spindle cover with emergency stop - German machine manual

Stanje: rabljeno, Hardinge HLV-H wysokoprędkościowa tokarka narzędziowa o wysokiej precyzji Maksymalna odległość między kłami: 457 mm (18”) Maksymalna średnica toczenia nad łożem: 279 mm (11”) Maksymalna średnica toczenia nad suportem: 229 mm (9”) Maksymalna średnica toczenia nad sanek poprzecznym: 152 mm (6”) Wrzeciono: Przelot wrzeciona – 32 mm (1 1/4”) Ledpfoy Nfqmjx Ah Uerl Tuleje okrągłe 5C – 27 mm (1 1/16”) Tuleje sześciokątne 5C – 22 mm (7/8”) Tuleje kwadratowe 5C – 19 mm (3/4”) Tuleje stopniowane – od 27 mm (1 1/16”) do 152 mm (6”) Uchwyt szczękowy (przelot przez wrzeciono) – 29 mm (1 5/32”) Tuleje rozprężne – 76 mm (3”) Bezstopniowa regulacja prędkości wrzeciona: 125–3000 obr./min Konik, stożek Morse’a: M/T 2 Zasilanie: 3-fazowe Masa netto (ok.): 750 kg W zestawie: - Odczyt cyfrowy 2-osiowy - Uchwyt 4-szczękowy - Tarcza mocująca - 3 uchwyty narzędziowe typu Multifix - Zestaw tulei zaciskowych 5C (różne rozmiary) Na sprzedaż w Jet Machinery Ltd Nr magazynowy Jet Machinery: #79017 Nr seryjny maszyny: HLV-H14793T Cena: 8 950 £ + VAT Dokładamy wszelkich starań, aby powyższe dane były prawidłowe, jednak nie możemy tego całkowicie zagwarantować. Zalecamy potencjalnym kupującym sprawdzenie najważniejszych parametrów. Ustawa o BHP z 1974 r.: Jako dostawca nie jesteśmy w stanie zagwarantować, by sprzęt spełniał wymagania przepisów odnośnie zabezpieczeń dla konkretnego zastosowania. Zalecamy, by przyszły użytkownik zapewnił kontrolę urządzenia przez specjalistę ds. osłon przed rozpoczęciem eksploatacji.