Klasični stružnica

Poreba TR 155B2 x 6000

Stanje: rabljeno, Leto izdelave: 2011, Technical Data: X-travel: 410 mm y-travel: 610 mm z-travel: 500 mm Spindle speed: 15,000 rpm Spindle taper: SK 40 Control: iTNC 530 HEIDENHAIN smart NC Table dimensions: 320 x 320 mm Table load capacity: 100 kg Tool changer: 48 positions Dedswlhvwepfx Abtsuu Total power requirement: 35 kVA Machine weight approx.: 7.4 t Required space approx.: 4.15 x 3.8 x 3.28 m 5-axis simultaneous machining center, NC rotary swivel table, C-axis 360°, B-axis +30-120°, Chip conveyor, Internal coolant supply 20 bar, 3D probing system, KinematicsOpt, electronic handwheel, Operating hours: approx. 9,600 h "machine on", approx. 3,500 spindle hours

Stanje: zelo dobro (rabljeno), moč: 16.000 kW (21.753,92 KM), vrsta goriva: dizel, skupna masa: 14.000 kg, Leto izdelave: 1998, obratovalne ure: 622 h, izhodna napetost: 400 V, nazivna moč: 1.600 kW (2.175,39 KM), nazivna (navidezna) moč: 2.000 kVA, izhodna frekvenca: 50 Hz, največja hitrost vrtenja: 1.500 obr/min,

Stanje: rabljeno, Mounting: MK 4 Duedpfxob N Ezrs Abtju

Stanje: rabljeno, Clamping Plate – Table of a Long Planer Machine – Table Width / Clamping Width: 1845 mm Duodpfsbn Amfjx Abteu Table Length / Clamping Length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot spacing: 263 mm Total length: 6230 mm Total plate height: 350 mm Weight: 11 t

Stanje: rabljeno, Leto izdelave: 1998, Technical details: Swing diameter: 830 mm Turning length: 4000 mm Swing diameter over bed slide: 540 mm Spindle bore: 130 mm Speed range: 2 - 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed rate: 1 - 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Space requirement approx.: 7 x 2.2 x 2 m Dedpjwwlt Rjfx Abtjuu Equipped with R&D MTC-K cycle control MULTIFIX tool holder, size D Coolant system *

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, središčna višina pri ročični gredi: 1.100 mm, teža obdelovanca (maks.): 180.000 kg, dolžina brušenja: 11.000 mm, premer brusilnega koluta: 1.066 mm, skupna dolžina: 11.700 mm, hod vretena: 11.700 mm, teža obdelovanca med konicami: 180.000 g, razdalja med središči: 11.700 mm, POMINI CNC Rullslipmaskin Modell HD-425-2-7L Siemens 840D, 12 axlar. Tillverkningsår: 2006. Dujdpfx Abowdmy Sotsu Två plansystem – sliparens och arbetsstyckets rörelsebanor är separata. Maskinens precision: Rakehet: 0,001–0,002 mm/m Rundhet: 0,001–0,002 mm Excentricitet: 0,002 mm Kronprofil (max kronhöjd): upp till 0,1 mm ±0,002 mm/m Ytfinish utan svängmärken och utan matningsspår efter finslipning. På separat bädd: Automatisk skjutmått, diameter 870–2.250 mm Virvelströmsprovare för sprickor och slag Ultraljudsdjupmätning upp till 180 mm Högtrycks spolning av slipskivan Automatisk eller manuell dynamisk balansering av slipskiva (elektromagnetisk) Diamantutrustad slipskivsformare (slipdressing) 2 hydrostatiska stöd 2 hydrodynamiska stöd 4 mjukstartpositioner för valsar Snabbväxlingsanordning för slipskiva inkl. motor Svängkran Vibrationsmätning och loggning på: Längsbädd vid huvudlagring Nackstöden Bakre upplag Slipspindelhuvud Bakre sliphuvud Vagnens sidosida Arbetsområde: Slipning längd: 11.000 mm Max diameter med 1.066 mm slipskiva: 2.200 mm Min diameter med 1.066 mm slipskiva: 800 mm Centrumavstånd: 11.700 mm Maximal valsvikt: 80 ton (utan stöd), 180 ton (med stöd) Minsta avstånd mellan slipskivans centrum och valsaxel: 845 mm Största avstånd mellan slipskivans centrum och valsaxel: 1.635 mm Bäddlängd, axel Z (hydrostatisk): Matning, steglöst 0–6.000 mm/min Oljefilmstjocklek: 0,020 mm Avstånd mellan vaggbäddar: 1.500 mm Bäddbredd: 160 mm Vagnens längd på bädden: 3.385 mm Slipspindelhuvud (axel X), slipskiveprob (axel A), inspektionsaxel A1: Slipspindelns tvärrörelse (kulkruv), axel X: 940 mm Upplösning axel X: 0,0001 mm Slipspindelns längd: 1.695 mm Spindellagers hydrostatisk diameter: 254 mm Manuell finskala, axel X: 0,00001 mm / division Kontinuerlig matning av slipskivan, U-axel: 0–0,35 mm/min Snabbmatning slipskiva, axel X: 0–830 mm/min Slipmotor (AC): 130 kW Slipspindelns varvtal: 400–1.100/1.600 rpm Slipningens yt-hastighet: steglöst Ythastighet slipskivdiameter 1.066 mm: 45 m/s Ythastighet slipskivdiameter 670 mm: 45 m/s Slipskivehål diameter: 508 mm Slipskivetjocklek: 76–152 mm Slipskivediameter: 670–1.066 mm Kroning, U-axel: Maximal krona på diameter: 10 mm Maximal konkavitet på diameter: 10 mm Huvudspindel: Arbetsstyckets varvtal: 5–50 rpm Huvudspindelmotor: 200 kW Max transmiterbart moment: 76,5 kNm Plansystemsdrift: V-remmar Max centrumdiameter, metriskt: 160 mm Pinolslag: 150 mm Huvudspindellängd: 3.110 mm Bakspindel: Pinoldiameter: 260 mm Pinolens slag: 750 mm Max centrumdiameter, metriskt: 160 mm Kon: Metrisk 5 % på diameter Bakspindellängd: 1.300 mm Bakspindelslag: 8.000 mm Skjutmått, arm Axel C, vagn Axel V, rotationsaxel B: Max mätbar diameter: 2.250 mm Min mätbar diameter: 870 mm Maskinens mått: Maskinvikt: 130 ton Längd: 19,5 m Bredd: 5,5 m Höjd: 3,2 m Fundamentdjup: 3,8 m

Stanje: dober (rabljeno), Leto izdelave: 2000, 20.000 U/min, Werkzeugvermessung auf dem Tisch wird geliefert, Die von Hand gezeigten Teile werden nicht mitgeliefert. Duodpjr Urm Ssfx Abteu

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW Duedpeirax Uofx Abtsu -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of turret heads: 1 - Number of axes: 6 MAIN SPINDLE - Spindle nose: A2-8 - Max. bar diameter: 80 mm - Spindle drive power: 18.5 kW - Spindle speed: 4,000 rpm - Max. machining diameter: 460 mm - Minimum C-axis resolution: 0.001° TURRET - Number of positions: 12 - Number of live positions: 12 - Travel X/Z: 260 x 795 mm Dujdpfxjx Tvkrs Abtsu - Travel Y: +/- 50 mm - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW SUB SPINDLE - Spindle nose: A2-5 - Max. bar diameter: 51 mm - Max. machining diameter: 190 mm - Spindle drive power: 11 kW - Spindle speed: 6,000 rpm - Minimum C-axis resolution: 0.001° - Travel: 760 mm ELECTRICAL SUPPLY - Supply voltage: 200 V - Total connected load: 42 kVA WEIGHT AND DIMENSIONS - Footprint: 4,414 x 2,370 mm - Machine height: 2,115 mm - Machine weight: 6,200 kg OPERATING HOURS - Power-on hours: 15,525 h - Operating hours: 12,865 h EQUIPMENT - Control: Mitsubishi MSX-850II - Teach-in programming: MAPPS III - Interfaces: USB / PCMCIA / RJ45 - Tool measurement system: Renishaw - 3-color status light - Tailstock function - Coolant tank - Chip conveyor: right side - Spindle cooling - Parts catcher - Bar feeder: LNS Quick LoadSERVO 80 - Parts conveyor - Number of driven tool holders: 2 - Number of fixed tool holders: 10 - 3-jaw chuck

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced Dsdevf E Avopfx Abteuu - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.