Kk-Industries Cy4R-Hhs 390-40/16 nakup rabljenega (56.105)

Stanje: novo, Shaft diameter: 480 mm Working speed: 3-6 m/min Motor power: 22 kW Length: 2500 mm Width: 2200 mm Height: 2300 mm Weight approx.: 9300 kg Technical data: - Welded frame made of steel construction - 3 driven rolls - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - Lateral angle guide rolls - Equipped with brake motor for precision bending - Digital readouts (2 units) Prsdpfx Aoh Alh Rjmfja Options: - STANDARD digital readout - NC unit 10 Screen EURO 11,500,--

Stanje: novo, Bending length: 1250 mm Sheet thickness: 5.5 mm Top roll diameter: 140 mm Technical data: - Rear roll driven by electric motor - Cone bending device - Hardened and polished rolls - Entire frame made from St 52 steel - Main motor equipped with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron body - Rear and bottom rolls adjusted manually - Compliant with CE standards Pedpfsd Ab Nvjx Amfjra Options: - Top roll driven by electric motor, EURO 1,260 - Digital display for rear roll position, EURO 1,010 - Hardened rolls, EURO 1,489 - Special voltage, EURO 480 - Material feed table - Bottom roll driven by electric motor We have numerous references!

Stanje: novo, Laser power: 3 Loading capacity: 1250x Travel X: 2020 mm Travel Y: 4050 mm Travel Z: 350 mm Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Table exchange time: approx. 10 sec Cooling system: Water chiller Weight approx.: 11,500 kg Dimensions (LxWxH): 4400 x 10,000 x 2120 mm The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with top-tier standards. It supports a laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used for the fabrication of agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machines and equipment. It is the ideal cutting machine for those looking to outsource their cutting operations. Enables easy blowing, cutting, pausing, calibration simulation, etc., with the wireless remote control. Comes with standard nesting software, enabling fast, operator-independent part preparation for cutting. Features Flycut cutting function. With its double shuttle table, cutting can continue without waiting. All our machines are manufactured to European standards and are CE certified. Our FLC-type machines include nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus and an active anti-collision function, plus an auto-view function that detects and automatically avoids obstacles. Predpfx Ametuyf Hsfoa Cutting heads are equipped with automatic cooling. The bridges we use in all our machines consist of a welded construction made from aluminum alloy sheets and are one-piece. This ensures rigidity and prevents deformation under impacts, overlaps, or loads. Additionally, thanks to being three times lighter than steel profile bridges, higher speeds and accelerations can be achieved with less motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Fly cutting - Nozzle and lens starter kit - Scrap drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote query - Automatic lubrication system - Dual camera SPECIFICATIONS VALUE Working area: 2000 x 4000 mm Loading capacity: 1200 kg XY axis travel: 2020 x 4050 mm Z axis travel: 350 mm XYZ axis guide: 4-point ball cage XY axis drive system: Rack and pinion Z axis drive system: Ball screw XY axis speed: 100 m/min Z axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table exchange time: 10 sec Laser source: Raycus / Hans / JPT Laser power output: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut Laser cutting head: Raytools / BOCI / WSX Supported gases: Air/Oxygen/N...

Stanje: novo, Pressure: 160 Bending length: 3200 mm Frame gap: 2655 mm Installation height: 400 mm Motor: 11 kW Max. ram stroke: 200 mm Repeat accuracy: 0.015 mm Positioning accuracy: 0.10 mm CNC press brake KK Industries 160x3200, 4 axes Y1-Y2-Y-X-R with CNC crowning Standard equipment: Pedpfx Asv S Npyomfora - Robust construction for high stability and precision. - CNC axes: Y1, Y2, X and R axis for precise control and accurate bending operations. - CNC-controlled, motorized crowning system for exact adjustment. - CNC control ZY 68 by the manufacturer (similar to Delem), user-friendly interface and high flexibility. - Backgauge with linear guides and ball screw drive, equipped with 4 stopper fingers for precise material positioning. - 2 sheet support arms for ergonomic material handling. - Laser safety device on the upper beam to ensure operator safety during operation. - Quick-clamping system for the top tool enables rapid and simple tool changes. - Top tool system: Promecam Amada, split and goosenecked for maximum flexibility. - Multi-V die system: Both Promecam and Amada systems compatible. - CE safety equipment, complies with all relevant safety regulations. Optional: Delem T53 control (surcharge: €5,000)

Stanje: novo, Debelina pločevine: 1,8 mm Premer zgornjega valja: 70 mm Mere (D׊×V): 1650 x 700 x 1160 mm Upogibanje: 1,5 mm Motor: 1,1 kW Dolžina pločevine: 1050 mm Tehnični podatki: - Ohišje iz litega železa - Ročno ali motorizirano (opcijsko) upogibanje - Po upogibanju se zgornji valj odpre ob strani za lažje odstranjevanje materiala - Naprava za konično upogibanje - Premikanje zadnjega in spodnjega valja ročno z ročnim kolesom - Prenosna nadzorna plošča - V skladu s CE standardi Predpfsd Ab T Rex Amfsa Možnosti: - Zadnji valj z motornim pogonom - Digitalni prikaz položaja zadnjega valja - Zaščitni pokrov ohišja EURO 274,-- - Kaljeni valji EURO 392,-- - Spremenljiva hitrost vrtenja Imamo veliko referenc!

Stanje: novo, Bending length: 1550 mm Sheet thickness: 3.5 mm Upper roll diameter: 110 mm Technical Data: - Rear roll driven by motor - Cone bending device - Entire frame constructed from St 52 steel - Main motor with brake system - Upper and lower rolls driven by electric motor, gearbox, and gear system - Mobile control panel - Cast iron body - Manual movement of rear and lower rolls - Complies with CE standards Options: - Upper roll driven by electric motor EURO 1,166.00 - Digital position display for rear roll EURO 1,010.00 - Hardened rolls EURO 995.00 - Special voltage EURO 480.00 - Material feed table - Lower roll driven by electric motor We have numerous references! Predpfxed Ab N Dj Amfsa

Stanje: novo, Bending length: 1050 mm Sheet thickness: 5 mm Top roller diameter: 110 mm Technical specifications: - Rear roller motor-driven - Conical bending device - Hardened and polished rollers - Entire body constructed from St 52 steel - Main drive motor with brake system - Top and bottom rollers driven by electric motor, gearbox, and transmission system - Portable control panel - Cast iron frame - Manual adjustment of rear and lower rollers - Compliant with CE standards Options: - Top roller driven by electric motor: EUR 1,166 - Digital display for rear roller position: EUR 1,010 Podpfxsd Ab N Hj Amfjra - Hardened rollers: EUR 725 - Special voltage: EUR 480 - Material feed table - Bottom roller driven by electric motor We have numerous references!

Stanje: novo, Shaft diameter: 180 mm Upper roll diameter: 60 mm Lower roll diameter: 50 mm Working speed: 5 m/min Motor power: 3 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Approx. weight: 1000 kg Technical Data: - Welded steel frame construction - 3 driven rolls - Hardened and ground shafts made from high-strength special steel - Rolls are hardened and ground - Horizontal and vertical working positions - Hardened standard rolls - Mobile control panel - Angle side guide rollers Prjdpfjd Ab H Nox Amfoa - Equipped with brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit, 7" screen, EURO 9,000 HPK 50 File Type Size Min. Dia Notes 1 60x10 20x5 500 250 Standard Rolls 2 80x20 50x5 500 250 Standard Rolls 3 32x32 12x12 400 250 Standard Rolls 4 Ø35 Ø10 350 250 Optional Rolls 5 Ø60x2 Ø15x1.5 600 200 Optional Rolls 6 2”x3.9 1/2”x2.7 400 200 Optional Rolls 7 50x25x3 20x15x2 450 250 Optional Rolls 8 45x3 20x2 600 300 Optional Rolls 9 60x60x6 30x30x4 650 350 Optional Rolls 10 50x50x5 30x30x4 550 350 Optional Rolls 11 60x7 20x3 550 250 Standard Rolls 12 50x6 20x3 500 250 Standard Rolls 13 60x7 20x3 500 250 Standard Rolls 14 UPN 80 UPN 30 600 250 Optional Rolls* 15 UPN 65 UPN 30 600 250 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities specified for 260 N/mm² plate yield strength

Stanje: novo, Hub: max. 450 Vgrajena višina: max. 900 Moč motorja: 22 Predpfoutuy Aex Amfja Moč črpalke: 48 Polnjenje olja: 120 Dimenzije (D׊×V): 3300×1250×2900 Teža pribl.: pribl. 4200 Premer valja: Ø 360 Tlak: 400 - Nastavitev tlaka preko vrtljivega regulatorja - Motorizirano upravljanje s pomočjo ročice - Ročno premičen valj - Svetla odprtina: 1600 × 550 mm - Zvezda-trikotno stikalo za pogon motorja - Hidravlični rezervoar skupaj z motorjem je nameščen ob strani spodaj na ogrodju Možnosti / dodatna oprema (doplačila): - Ventil za regulacijo tlaka: 400,00 € - Ventil za regulacijo hitrosti: 400,00 € - Varnostni zapor za bat: 250,00 € - Ročni volan za premični valj: 950,00 € - Valj premičen preko menjalnega motorja: 1.700,00 € - Podložna plošča mize (1300 × 850 × 150 mm): 3.300,00 € *Vse slike so namenjene izključno ponazoritvi in so simbolne fotografije. Dejanska oprema se lahko nekoliko razlikuje*

Stanje: novo, Pressure: 100 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 800 x 600 Ram area: 800 x 600 Table height: 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Approx. weight: 5,500 Oil capacity: 200 Control / Key switch: 1. Set-up mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Mounting height: 500mm Stroke length: 400mm Table plate: 800 x 600 (with T-slots) (custom designs possible) Ram plate: 800 x 600 (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Podpfjm Nntyjx Amfora Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2x workstation lighting 8 free inputs & outputs on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable safety Operating manual & parts list (German) With side safety door (doors slide to the rear)

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Weight approx.: 8,500 kg Dimensions (LxWxH): 4,650 x 1,700 x 1,800 mm Technical data: Sheet thickness: 6 mm Cutting length: 4,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 4,650 mm Width: 1,700 mm Height: 1,800 mm Weight: 8,500 kg Equipment: Swing cut system NC preset control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via the control system Motorized backgauge up to 1,000 mm Clear control panel mounted on swivel arm Poded Ab Hhjpfx Amfera Hydraulic hold-downs arranged close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers Foldable finger guard 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy replacement and regrinding of blades Adjustable cutting length for efficient processing Lower blade with four cutting edges, reversible Upper blade with two cutting edges, reversible Qualified customer service Operating instructions in ENGLISH Machine and equipment in accordance with CE regulations

Stanje: novo, Sheet length: 4,200 mm Sheet thickness: 13.0 mm Cutting width: 4,200 mm Total power requirement: 18.5 kW Weight approx.: 13,800 kg Dimensions (LxWxH): 4,650 x 2,270 x 2,000 mm Technical Specifications: Sheet thickness: 13 mm Cutting length: 4,200 mm Cutting angle: 1.80° Back gauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,800 mm Width: 1,270 mm Height: 2,000 mm Weight: 13,800 kg Features and Equipment: Swing cut design NC pre-selection control ELGO P 40 T Touch with back gauge and cutting gap adjustment operated from the control panel motorized back gauge up to 1,000 mm clearly arranged control panel mounted on swivel arm hydraulic hold-downs arranged close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball rollers Prodpfx Amed Ab Hiofea foldable finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot easy blade changing and regrinding adjustable cutting length for efficient processing bottom blade usable 4 times (quadruple rotating) top blade usable 2 times (reversible) qualified customer service Operating manual in ENGLISH Machine and equipment comply with CE regulations

Stanje: novo, Shaft diameter: 60 mm Upper roll diameter: 215 mm Lower roll diameter: 215 mm High-performance hydraulics: 16 l/min Working speed: 4 m/min Poded Ab H Rspfx Amfjra Motor power: 1.5 kW Length: 1000 mm Width: 1400 mm Height: 1650 mm Approx. weight: 950 kg Technical Data: - Welded steel frame - 3 rolls are driven by motor - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical operating positions - Standard rolls - Guide rolls - Equipped with a brake motor for precision bending - Portable control panel Options: - Digital readout EURO 700 - NC unit EURO 7,000 - Lateral angle guide rolls EURO 1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN 80 UPN 30 800 400 Optional Rolls* 15 UPN 80 UPN 30 1200 600 Standard Rolls* * Special washer (spacer) may be required / Only with the special beam bending attachment • Capacities are based on a plate yield strength of 260 N/mm²

Stanje: novo, Dimensions (LxWxH): 1.10 x 1.15 x 1.40 m Approx. weight: 1,150 kg Psdpfx Amsd Ab Idofsra Total power requirement: 4 kW Sheet thickness: 6 mm Details: - Hydraulic drive - Blade length: 200 mm - Notching angle adjustable from 60–140°, 6 mm - Notching angle adjustable from 30–59°, 4 mm

Stanje: novo, Bending length: 2600 mm Sheet thickness: 7 mm Top roller diameter: 200 mm Technical data: - Back roller motorized Prsdpsd Ab Ngjfx Amfja - Cone bending device - Hardened and polished rollers - Entire body made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rollers driven by brake electric motors and planetary gearboxes within the transmission - Portable control panel - In compliance with CE standards Options: - Bottom roller driven by electric motor: EURO 2,200 - Digital display for rear roller position: EURO 1,010 - Extended rollers: EURO 966 - Profile rollers: EURO 1,190 We have numerous references!

Stanje: novo, Bending length: 1600 mm Sheet thickness: 8 mm Top roller diameter: 170 mm Technical Data: - Back roller driven by motor - Cone bending device - Hardened and polished rollers - Entire frame made from St 52 steel - Asymmetric design for perfect bending results - Top and bottom rollers driven by brake electromotors and planetary gearboxes - Portable control desk - In compliance with CE standards Options: - Bottom roller driven by electric motor: EUR 1,650 - Digital display for back roller position: EUR 1,010 - Extended rollers: EUR 966 Pjdpfx Asd Ab Nqomfjra - Profile rollers: EUR 1,190 We have numerous references!

Stanje: novo, Sheet thickness: 3.3 mm Bending length: 1050 mm Top roll diameter: 90 mm Technical specifications: - Cast iron body - Manual or motorized (optional) bending - After bending, the top roll can be swung out to the side for easy removal of the workpiece - Cone bending device - Rear roll and lower roll are raised and lowered manually via handwheel - Portable control panel - In compliance with CE standards Prodpsd Ab T Dsfx Amfoa Options: - Motorized rear roll EURO 825 - Digital display for rear roll position EURO 1,010 - Body cover EURO 274 - Hardened rolls EURO 480 We have many references!

Stanje: novo, Bending length: 1550 mm Sheet thickness: 1.2 mm Upper roll diameter: 70 mm Technical Data: - Cast iron body - Manual or motorized bending (optional) - After bending, the upper roll can be opened to the side for easy removal of the material - Cone bending device - Rear and lower rolls can be adjusted up and down manually with handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roll - Digital display for rear roll position - Body cover EURO 362,-- - Hardened rolls EURO 550,-- - Variable rotation speed We have numerous references! Prsdpfx Ajd Ab T Ijmfsa

Stanje: novo, Sheet thickness: 1.2 mm Bending length: 1550 mm Top roller diameter: 70 mm Technical Data: - Cast iron body - Manual or motorized (optional) bending - After bending, the top roller can be swung out to easily remove the material - Conical bending device - Movement of the rear and lower rollers up and down manually via handwheel - Portable control panel - In compliance with CE standards Pedpfx Amed Ab T Njfsra Options: - Rear roller with motor EURO 825,-- - Digital display for rear roller position EURO 1,010,-- - Body cover EURO 362,-- - Hardened rollers EURO 550,-- We have numerous references!

Stanje: novo, Bending length: 1050 mm Sheet thickness: 1 mm Prjdpsd Ab Uxofx Amfoa Upper roller diameter: 56 mm Technical data: - Cast iron body - Manual or motorized (optional) bending - After bending, the upper roller can be swung out to easily remove the material - Cone bending device - Manual adjustment of rear and lower rollers using handwheels - Portable control panel - In compliance with CE standards Options: - Motorized rear roller - Digital display to indicate the rear roller position - Body cover - Hardened rollers EURO 336, -- We have many references!

Stanje: novo, Dolžina upogibanja: 1050 Debelina pločevine: 1 Premer zgornjega valja: 56 Tehnični podatki: - Ohišje iz sive litine - Ročno ali motorizirano (opcijsko) upogibanje - Po upogibu se zgornji valj odpre na stran za enostavno odstranitev materiala - Naprava za stožčasto upogibanje - Premikanje zadnjega in spodnjega valja ročno z volanom navzgor in navzdol - Prenosna upravljalna konzola - V skladu s CE standardi Opcije: Pjdpfxed Ab Uys Amfsra - Zadnji valj z motorjem - Digitalni prikaz položaja zadnjega valja - Pokrov ohišja - Kaljeni valji EURO 396, -- Imamo veliko referenc!

Stanje: novo, Bending length: 1050 mm Sheet thickness: 0.8 mm Top roll diameter: 46 mm Technical data: - Cast iron body - Manual or motorized (optional) bending operation - Top roll can be opened sideways after bending for easy removal of the material - Cone bending device - Rear and lower roll adjustment up and down manually via handwheel - Portable control panel - Complies with CE standards Options: - Motorized rear roll - Digital display to indicate rear roll position - Body cover - Hardened rolls EURO 336, -- Psdod Ab U Aepfx Amfsra We have many references!

Stanje: novo, Sheet length: 4065 mm Sheet thickness: 16.0 mm Total power requirement: 30 kW Weight approx.: 21,000 kg Dimensions (LxWxH): 4930 x 3300 x 2220 mm Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design, Model AS 4016, provides everything you need for perfect cutting. CNC swing beam guillotine shear KKI Thanks to robust and durable mechanical and hydraulic systems, a precise CNC-controlled backgauge with ball screw spindle, and user-friendly CNC controls, Dener shears are highly efficient production machines. Our standard portfolio includes shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 m to 6 m. Upon request, higher sheet thicknesses and longer cutting lengths are also available. Prjdped Ehh Njfx Amfoa The exceptionally long service life of Dener shears is due to their particularly robust, fully welded frame construction. The entire machine body, cutting beam, and backgauge are resistant to deflection and deformation, ensuring the highest cutting quality. By entering the sheet thickness and material type, the required cutting angle and blade gap are automatically calculated by the CNC control system. Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design, Model AS 4016, offers everything needed for precise cutting. Technological Advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap adjustment - Easy operation - Low maintenance costs - High safety standards - Use of components from reputable manufacturers - Low unit costs Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design, Model AS 4016, includes everything necessary for perfect shearing. With our patented blade support system, the upper blade can be finely adjusted and stabilized, ensuring precise, high-quality cuts. Undesirable banana-shaped cutting is prevented. Technical Data: Sheet thickness: 16 mm Cutting length: 4,065 mm Cutting angle: 0.5 - 3° Number of hold-downs: 26 Backgauge: 1,000 mm, CNC-controlled Motor power: 30 kW Cutting speed (0.5 - 3°): 13-6 cuts/min Throat depth: 350 mm Oil tank: 400 liters Length: 4,930 mm Width: 2,300 / 3,300 mm Height: 2,220 mm Weight: 21,000 kg Equipment: • Swing beam design • CNC control - Backgauge - Cutting angle - Blade gap - Cutting length • Ball screw spindle for backgauge • Balls on work table • Side fence 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • 1,000 mm flip-up finger guard Optional pneumatic sheet support, EURO 8,420 Numerous references available!

Stanje: novo, Pressure: 150 Bending length: 3050 mm Frame gap: 3050 mm Installation height: 590 mm Max. stroke length: 300 mm Dimensions (LxWxH): 4740x2000x2680 mm Weight approx.: 9500 kg Motor power: 22 kW CNC crowning via control: yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-15030 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, due to their flexibility and reliability, represent the technology of tomorrow. The higher speed and precision of this new machine generation offers improved efficiency, ergonomic features, and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and capacities, Dener is a pioneer of this technology, bringing extensive experience and quality. Standard Equipment: KK-Industries holds the general agency of the DENER group. We have configured a high-quality model for Europe. The CNC servo electric press brake KK-Industries, made by DENER, includes: Technological Advantages, Model REVOLUTION DDM: The CNC servo electric press brake is characterized by high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% reduced energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy Predpjd Etf Ejfx Amfsa - High bending speed and significantly quieter - Usable full frame length - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment Includes: 3D color graphics controller DELEM 66T with 17-inch touchscreen Y1, Y2, X, and R axes controlled by CNC CNC crowning via 3D control X-axis 500 mm, R-axis stroke 150 mm (for 1.5 m and 2 m models) X-axis 750 mm, R-axis stroke 250 mm (on other press brakes) We make no compromise on tooling, equipping the KKI REVOLUTION CNC servo electric press brake with quality tools from EUROSTAMP Italy. Segmented gooseneck upper tool 4-V die block 60x60 (V = 16, 22, 35 and 50 mm) Back gauge with servo motors on linear guide and ballscrew Of course, a machine is only as good as its service. Therefore, we focus on highly qualified staff with long-standing experience in CNC sheet metal processing. Laser safety device on the upper beam CE safety equipment Operating manuals in GERMAN and ENGLISH Options: Additional controlled axes for backgauge: X1, X2, R, Z1, Z2, Delta X ATF type 6-axis backgauge, X1, X2 - R type backgauge X-Prime type backgauge Hydraulic upper and lower tool clamping for WILA tools CNC 3D touchscreen DELEM DA-69T control KK-Industries GmbH

Stanje: novo, Sheet length: 2060 mm Sheet thickness: 4 mm Dimensions (LxWxH): 2700 x 2250 x 1400 mm Motor: 7.5 kW Weight approx.: 3000 kg Standard accessories: - NC control - Programmable, motorized backgauge with 750 mm travel - Shadow line lighting - 1 piece stop rail with measuring scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Easy front adjustment of blade gap Prsdpfjgickrjx Amfea - Ball screw spindle - Stroke counter - Portable foot pedal with emergency stop button - Light barrier on rear safety guards