Kk-Industries Cy4R-Hhs 300-30/13 nakup rabljenega (58.660)

Stanje: novo, Pesto: maks. 450 Lajdpfx Aleutuyvj Iob Vgradna višina: maks. 900 Motor: 22 Kapaciteta črpalke: 48 Polnitev olja: 90 Dimenzije (DxŠxV): 2500x1200x2800 Teža pribl.: 4000 Maks. premer: 330 Tlak: 300 Nastavitev tlaka preko vrtljivega regulatorja Motorizirano upravljanje preko ročne ročice Ročni obroč za pomični cilinder Hidravlika je nameščena spodaj ob strani ogrodja Prosta širina: 1600 mm x 550 mm Gibanje cilindra: 500 mm od sredine na obe strani

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45 cc – 65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Table area: 3500 mm x 2000 mm Clear width: 2200 mm Bridge travel: 2800 mm Return speed: 50 mm/sec Dimensions (LxWxH): 3500 x 3200 x 3600 mm Lodpfx Aljr Etulo Ieab Cylinder: Ø 370 mm – Capacity: 3000 kN (280 bar – 300 ton) Key Specifications: - Cylinder diameter: Ø 370 mm - Table dimensions: 3500 x 2000 mm (clear width: 2200 mm) - Load-bearing surface: 3000 x 2000 mm - Bridge travel: 2800 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Maximum installation height: 1200 mm (distance from table or cover plate to cylinder piston WITHOUT mandrels) - Stroke length: 400 mm - Motor: 22 kW (IE-3) - Pump: 45 cc – 65 L/min (KAWASAKI) - Forward speed: 10 - 5 mm/sec - Return speed: 50 mm/sec - Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Equipment: - Hydraulics: DUPLOMATIC - Control: Siemens S7-1200 - BEIJER 7'' display - Control cabinet mounted to side wall of bridge - Swivel operator panel - Pressure adjustable via display (50 – 300 ton) - Speed adjustable via throttle valve - Cylinder with chrome plating - Wired remote control - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3 phase power supply - Anti-rotation lock for cylinder - Lateral movement of cylinder via drive motor - Bridge movement via drive motor - Bridge area safeguarded by light curtain (Datalogic) - Cylinder mandrels: Ø 200 / 400 / 600 mm, in length - 3 extension mandrels included (Example photo)

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45cc–65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without base plate) / 820 mm (with base plate) Table dimensions: 3000 mm x 2000 mm Clearance width: 2200 mm Bridge traverse: 2300 mm Return speed: 50 mm/s Laodpfxor D U I Do Al Ieb Capacity: 3000 kN (280 bar – 300 tons) - Cylinder: Ø 370 mm - Table size: 3000 x 2000 mm; clearance width: 2200 mm - Bridge traverse: 2500 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Installation height: max. 1200 mm (distance from table or base plate to cylinder piston) WITHOUT MANDRELS - Stroke length: 400 mm - Pump: 45 cc – 65 L/min - Forward speed: 10 – 5 mm/sec - Return speed: 50 mm/sec - Motor: 22 kW (IE-3) - Table height: 750 mm (without base plate), 820 mm (with base plate) Accessories: - Hydraulics: DUPLOMATIC - Control: LENZE & SCHNEIDER - Control cabinet mounted on bridge sidewall - Pressure adjustable via rotary valve - Speed adjustable via throttle valve - Cylinder chrome-plated - Remote control (wired) - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3-phase - Rotary lock for cylinder - Cylinder laterally adjustable by drive motor - Bridge traversable by drive motor - Soft starter for motor - Cylinder piston mandrels: Ø 200 / 400 / 600 mm, long - 3 extension mandrels included (Sample photo)

Stanje: novo, Sheet length: 3100 mm Sheet thickness: 6.0 mm Total power requirement: 11 kW Weight approx.: 7000 kg Dimensions (LxWxH): 4110 x 2195 x 1770 mm Our strong brand KKKletzer CNC GUILLOTINE SHEAR in swing-beam design, Model SWT, has everything you need for cutting. We've raised the standard even with the swing-beam models and also equip our guillotine shears with automatic blade gap adjustment via the ELGO P40T touchscreen control—at no extra charge. NC swing-beam-guided guillotine shear KKI Technological Advantages - Fast and precise cuts - Robust, durable frame construction - Automatic blade gap adjustment - Easy operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Technical Data: Sheet thickness: 6 mm Cutting length: 3,100 mm Cutting angle: 1.5° Number of hold-downs: 15 Backgauge: 1,000 mm via CNC Motor power: 11 kW Strokes per minute: 16 Throat depth: 50 mm Oil tank: 200 liters Length: 4110 mm Width: 2195 mm Height: 1770 mm Weight: 7000 kg • Stable swing-beam construction • Blade gap adjustment via the control - Backgauge - Blade gap - Cutting length • Ball screw drives for the backgauge • Ball transfer tables • Side gauge 1,500 mm • 2 support arms 1,000 mm Lsdpfx Asd Eqrnjl Isab • Cutting line illumination • Flip-up finger guard to 1,000 mm Option: Pneumatic sheet support, EURO 3,900-- We have numerous references!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Vecoplan VAZ 1300 Shredder Hopper inlet: 2.26 m x 1.65 m Ljdpfewu Nwhox Al Ioab

Stanje: rabljeno, Abrasive paper, sandpaper, abrasive cloth, grinding discs, abrasive bodies Laodjd Srxmspfx Al Ijb - Manufacturer: Fuchs, Type: EKW 46 K/5 KE - Outer diameter: 300 mm - Width: 13 mm - Bore diameter: 100 mm - Price: per piece - Quantity: 4 pieces - Weight: 1.9 kg

Leto izdelave: 1989, stanje: rabljeno, Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, control unit, converter, controller -Indramat: A.C. servo controller from Battenfeld injection molding machine Ljdpfx Alsqgi Ile Ieab -Type: MOD13/1X.... -Control: TDM 3.2-30-300-W0 -Quantity: 1x servo controller available -Dimensions: 390/70/H325 mm -Weight: 7.7 kg

Leto izdelave: 1989, stanje: rabljeno, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller Lsdeqgi Ipspfx Al Ieab -Indramat: A.C. servo controller from Battenfeld injection moulding machine -Type: MOD13/1X014-088 -Controller: TDM 3.2-30-300-W0 / TVM 2.1-50-W1-220 -Quantity: 1x servo controller available -Dimensions: 390/105/H325 mm -Weight: 15.1 kg

Stanje: dober (rabljeno), V-belt pulley, pulley with taper bush, taper tension bush, taperlock tension bush - V-belt pulley: 4-groove pulley type SPA 300 4 3020 - V-belt width: 13 mm - Bore: Ø 55 x 50 mm taper bush 3020 (interchangeable) - Dimensions: Ø 300 x 65 mm Laedou Sv S Ejpfx Al Ijb - Weight: 14.1 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, najv. debelina pločevine: 13 mm, najv. debelina jeklene pločevine: 13 mm, dolžina rezanja (maks.): 3.100 mm, največja širina rezanja: 3.100 mm, dolžina mize: 3.100 mm, širina mize: 3.100 mm, Rabljena visokokakovostna hidravlična giljotina za pločevino Edwards Pearson, 3 metre x 13 mm Visokokakovostna rabljena hidravlična škarja Edwards Pearson VR 13/3000 naprodaj Letnik: 2000 V kompletu s prednjimi opornimi rokami ter spredaj upravljanim zadnjim linijskim prislonom / upravljanje Cybelec DNC 10 Hitro nastavljanje rezila za tanjše pločevine Maksimalna debelina materiala: 13 mm, delovna širina: 3 metre Lodpfx Aloumlbwj Ijab Stroj popolnoma servisiran in v dobrem delujočem stanju Video na voljo na zahtevo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 12.171 h, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.300 mm, višina brušenja: 150 mm, Dražba brusilne linije Boere, sestavljene iz Elite BKKS 1300 & Elite TKKS 1100! Linija je bila leta 2019 prenovljena s strani Boere! TEHNIČNI PODATKI Največja višina brušenja: 150 mm Največja širina brušenja: 1.300 mm Lajdpfoy Tuvyex Al Isb Moč prvega motorja: 45 kW Moč drugega motorja: 30 kW Moč tretjega motorja: 18,5 kW Napetost: 380 V Poraba toka: 172 amperov PODATKI O STROJU Moč motorja prve enote: 45 kW Moč motorja druge enote: 30 kW Moč motorja tretje enote: 18,5 kW Napetost: 380 V Poraba toka: 172 A Delovne ure: 12.171 h

Stanje: novo, x-axis travel: 3000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump power for flushing: 37 kW Control system: Siemens PLC touch screen, directly usable DXF files Output pressure: max. 5500 bar Abrasive feed system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor to monitor abrasive supply to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is compressed to pressures of up to 5500 bar. Depending on the requirement and the workpiece, this is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. As the waterjet technology processes materials without heat input, no deformations occur. By adding an abrasive, waterjet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible manufacturing allows for both vertical and angled cuts. We are happy to accept your individual CAD data. Waterjet technology offers great advantages for industry, trades, and custom prototype production. It also scores points in terms of environmental impact, as the waterjet process operates dust- and steam-free and is material-efficient. Waterjet Cutting: Sample Gallery What already sounds impressive in theory is even more remarkable on the finished object. We have compiled a selection of images to demonstrate our capabilities with waterjet cutting. Browse through our sample gallery to get an impression of the possibilities offered by this modern machining process. Waterjet will also find the right solution for your project! Advantages - No deformations in the cut area - Cutting without thermal influence - Material-saving - High precision: +/- 0.1 mm - Cutting area: x = 3010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and angled cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, steam- and dust-free We cut everything All materials formed to shape: - Aluminum - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble Lasdjhqnl Topfx Al Ieb - Tiles - Composites - Promat cutouts - Rubber - Plastics - Plexiglass Optional: Oil cooler ..... €10,725.00 Water filter system..... €1,430.00 Sludge extraction system ..... €10,725.00 Professional water treatment system..... €10,725.00 An oil cooler must be present during commissioning!!! Necessary for operation longer than 1 hour. Further videos:

Stanje: novo, x-axis travel: 4000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump output for flushing: 37 kW Control: Siemens PLC touch screen, direct import of usable DXF files Max. output pressure: 5500 bar Abrasive delivery system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor for monitoring abrasive feed to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is pressurized up to 5500 bar. Depending on the requirements and workpiece, it is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. Since the waterjet process works without heat input, material deformation is avoided. By adding abrasive, waterjet cutting achieves maximum precision with tolerances of +/- 0.01 mm. Our flexible production enables both vertical and bevel cuts. We are happy to receive your custom CAD files. Waterjet technology provides significant advantages for industry, trade, and custom prototyping. It is also environmentally friendly as waterjet cutting operates dust-free and steam-free, while also conserving material. Waterjet cutting: example gallery What already sounds impressive in theory is even more striking in the finished product. We have compiled a selection of images to demonstrate our capabilities in waterjet cutting. Click through our sample gallery to see what is possible with this modern processing technology. Waterjet will find the ideal solution for your application! Laodpfx Aljd Ab Uuj Isb Advantages - No deformation in the cutting area - Cutting without thermal input - Material saving - High precision: +/- 0.1 mm - Cutting area: x = 4010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and bevel cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, dust- and steam-free We cut everything! All materials shaped, including: - Aluminium - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - composites - Foam material cuts - Rubber - Plastics - Plexiglas Optional: Oil cooler                                                                € 10,725.00 Water filtration system                                              € 1,430.00 Sludge extraction system                                            € 10,725.00 Professional water treatment system                        € 10,725.00 An oil cooler must be present during commissioning!!! Operation for longer than 1 hour is only possible with an oil cooler.

Stanje: novo, Pressure: 100 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 800 x 600 Ram area: 800 x 600 Table height: 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Approx. weight: 5,500 Oil capacity: 200 Control / Key switch: 1. Set-up mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Mounting height: 500mm Stroke length: 400mm Table plate: 800 x 600 (with T-slots) (custom designs possible) Ram plate: 800 x 600 (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Lsdpom Nntyjfx Al Ieab Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2x workstation lighting 8 free inputs & outputs on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable safety Operating manual & parts list (German) With side safety door (doors slide to the rear)

Stanje: novo, Pressure: 100Motor: 11Installation Height: 500Max. Stroke Length: 400Ram Adjustment: 790 x 600Table Height: Floor to Top of Table - 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmWeight approx.: 5,500Oil Fill: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 bar Control / Key Switch Modes: Setup Mode – Manual, without light curtain Automatic Mode – Full speed with light curtain Hydraulic System: Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 units, Ø 50 x 30 mm Auxiliary Guides: 2 units, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc – 23 l/min, helical gear pump Speeds: Advance: 110 mm/sec Return: 200 mm/sec Pressure Phase: 9 mm/sec Machine Dimensions: Installation height: 500 mm Stroke length: 400 mm Ram plate: 790 x 600 mm (with T-slots) Table plate: 790 x 600 mm (with T-slots) Table height: 850 mm (from floor to top of table) Hydraulic Accessories: Hydraulic control block & components by REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Pressure holding valve Control Accessories: Lodswrkctjpfx Al Ioab Siemens S7-1200 control system Main control cabinet Safety PLC by SICK Safety light curtains by SICK (700 mm) Linear scale for stroke adjustment 10" BEIJER touchscreen (German & English) Movable two-hand control Ethernet interface for remote maintenance Fault indicator with light and audible alarm Dual workspace lighting Side safety doors (can be swung out) Hydraulic proportional valves Dual-channel safety control Operating manual & parts list (German) Complies with current machinery directive EN 693 Oil quantity: 220 liters (tank volume: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 light grey & RAL 7016 anthracite grey

Stanje: novo, Bending length: 2100 mm Sheet thickness: 6 mm Upper roll diameter: 170 mm Technical data: Lasdpfx Aljd Ab Npe Ijb - Rear roll motorized drive - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electromotors and planetary gears in the gearbox - Portable control console - In compliance with CE standards Options: - Bottom roll driven by electric motor EUR 1,650 - Digital display for rear roll position EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references!

Stanje: novo, Dimensions (LxWxH): 0.80 x 0.85 x 1.20 m Approx. weight: 0.61 t Total power requirement: 4 kW Sheet thickness: 6 mm Details: - Hydraulic drive, 6 mm at fixed 90° Lasdpfx Aljd Ab Ico Iob - Blade length: 200 mm - Clipping angle: 90°

Stanje: novo, Shaft diameter: 580 mm Working speed: 3-6 m/min Motor power: 30 kW Length: 2760 mm Width: 2310 mm Height: 2680 mm Lsdpsh Alh Hsfx Al Ioab Approx. weight: 14,400 kg Technical specifications: - Welded frame made of steel construction - 3 rollers driven - Hardened and ground shafts made from high-strength special steel - Rollers are hardened and ground - Horizontal and vertical working position - Standard hardened rollers - Mobile control panel - Angular side guide rollers - Brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit 10Screen EURO 11,500,--

Stanje: novo, Pressure: 135 Bending length: 3020 mm Frame width: 2555 mm Installation height: 550 mm Max. stroke length: 320 mm Throat depth: 450 mm Dimensions (LxWxH): 3745x2250x2835 mm Weight approx.: 9300 kg 4 axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic controller) CNC crowning via controller: Yes, via Esa S630 (2D graphic controller) Motor power: 15 kW Technical Specifications XL 30135 Unit Bending length: 3020 mm Bending force: 135 t Approach speed: 160 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation / clear height (E): 550 mm Throat depth (D): 450 mm Frame gap (B): 2555 mm Machine length (L): 3745 mm Machine width (W): 2280 mm Width without front stop (Y): 1720 mm Maximum height: 2835 mm Main motor: 15 kW Oil tank volume: 190 l Machine weight: 9600 kg The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile range of applications. EUROPA XL offers an exceptionally large installation height and, as a result, a generous cylinder stroke. Likewise, the throat depth is above average to ensure minimal restriction. We focus on quality, which is also reflected in the controller. As standard, our high-quality Esa S640 (2D graphic controller) is included. Furthermore, the KKI EUROPA XL press brake is equipped with CNC axes Y1, Y2, X, and R via the controller. Naturally, CNC crowning with the Esa S640 (2D graphic controller) is also included. We make no compromises on the top tool and die, equipping the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, a machine is only as good as its service, which is why we place a strong emphasis on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2, X, and R Esa S640 (2D graphic controller) Backgauge with double linear guide and ball screw spindle Motorized crowning device with CNC control 2 heavy-duty front support arms with height adjustment via handwheel; heavy-duty linear guide version from 175 tons upward Laser safety device on upper beam CE safety equipment Various options available Other controllers: ESA 640 2D 15'' touchscreen controller – €4,520 incl. ESA 675 W 3D 21'' touchscreen controller (Windows-based) – €6,485 DELEM 66 T 2D 17'' touchscreen controller (Windows-based) – €10,165 DELEM 69 T 3D 17'' touchscreen controller (Windows-based) – €16,350 Lsdpfxjd Ehine Al Isab KK-Industries GmbH Something for everyone!

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Ram Area: 900 x 600 mm Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Laodpfxswzzzfe Al Iob Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Operating instructions & parts list (German), including maintenance plan

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Total power requirement: 7.5 kW Weight approx.: 5,100 kg Dimensions (LxWxH): 3,800 x 1,750 x 1,700 mm Our strong brand KKKletzer CNC GUILLOTINE SHEAR, swing-beam design Model SWT provides everything needed for precise cutting operations. We have increased the standard in the swing-beam design as well, supplying our guillotine shears with automatic blade gap adjustment via touchscreen control E21S at no extra cost. Lajdpfsnwt A Aox Al Iob Technical specifications: - Sheet thickness: 6 mm - Cutting length: 3,200 mm - Cutting angle: 1.5° - Motor power: 7.5 kW - Strokes per minute: 12 - Length: 3,800 mm - Width: 1,750 mm - Height: 1,700 mm - Weight: 5,100 kg • Robust swing-beam design • Blade gap adjustment via the control unit - Backgauge - Blade gap - Cutting length • Ball screw spindles for the backgauge • Balls embedded in the table for easy sheet handling We have numerous references!

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 0084603, širina obdelovanca (maks.): 300 mm, Oprema: dvostranski, VG FANTASTIC 300 Ledpfxoxiycus Al Isab KALIBRACIJSKI BRUSILNI STROJ VG MACHINES MOD. DVOSTRANSKI FANTASTIC F/G 300 - 3KKS/3KKS - Delovna širina: 300 mm - Skupna instalirana moč: 37 kW - Sestava: RRT/RRT (spodnji valj + zgornji valj) - Motorji: 2x (7,5 + 7,5 + 7,5) Širina traku: 1900 x 300 mm

Stanje: novo, Bending length: 1600 mm Sheet thickness: 8 mm Top roller diameter: 170 mm Technical Data: - Back roller driven by motor - Cone bending device - Hardened and polished rollers - Entire frame made from St 52 steel - Asymmetric design for perfect bending results - Top and bottom rollers driven by brake electromotors and planetary gearboxes - Portable control desk - In compliance with CE standards Options: - Bottom roller driven by electric motor: EUR 1,650 - Digital display for back roller position: EUR 1,010 - Extended rollers: EUR 966 Lasdpfx Ajd Ab Nqel Iob - Profile rollers: EUR 1,190 We have numerous references!

Stanje: novo, Sheet thickness: 3.3 mm Bending length: 1050 mm Top roll diameter: 90 mm Technical specifications: - Cast iron body - Manual or motorized (optional) bending - After bending, the top roll can be swung out to the side for easy removal of the workpiece - Cone bending device - Rear roll and lower roll are raised and lowered manually via handwheel - Portable control panel Ljdpod Ab T Dofx Al Ijab - In compliance with CE standards Options: - Motorized rear roll EURO 825 - Digital display for rear roll position EURO 1,010 - Body cover EURO 274 - Hardened rolls EURO 480 We have many references!

Stanje: novo, Bending length: 1550 mm Sheet thickness: 1.2 mm Upper roll diameter: 70 mm Technical Data: - Cast iron body - Manual or motorized bending (optional) - After bending, the upper roll can be opened to the side for easy removal of the material - Cone bending device Lodped Ab T Isfx Al Isab - Rear and lower rolls can be adjusted up and down manually with handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roll - Digital display for rear roll position - Body cover EURO 362,-- - Hardened rolls EURO 550,-- - Variable rotation speed We have numerous references!