Josan 1410 nakup rabljenega (204)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902029406, lastna masa: 5.800 kg, največja dovoljena obremenitev: 29.200 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2021, naslednji pregled (TÜV): 06/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: srebrn, The photos are archive images; the vehicle may still be in use! Chassis: Semi-Trailer for Haulage Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approx. 8,040 mm long, 6 coil supports (coil pockets internal dimensions 82 x 52 mm), coil well cover with multiplex boards and steel crossmembers, 2 slit coil covers for the coil well, each approx. 293 mm wide, unladen weight approx. 13 kg per cover, outer frame slightly sloped with "Load-Lock profile" for attaching tie-down straps. Note: To attach straps in combination with side walls, the side walls must be opened! 9 pairs of recessed lashing rings, each rated at 5 tons, in the area of the coil well. 24-ton two-speed landing gear, single side operation, with straight lower part, without compensating slide. Note: Free landing gear foot clearance, or free rear swing radius approx. 1,930 mm, without supports. Retractable ladder at the rear, door retainers on sides, 2 wheel chocks with holder, aluminium side underrun guard, holder mounted transversely and on the chassis main beam for supporting aluminium planks, rear underrun protection in aluminium, half-shell fenders with anti-spray flaps compliant with EU regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stanchion pockets integrated in the outer frame, approx. 72 x 42 mm internal dimensions in positions 1 and 2 as per old Fliegl stanchion data sheet, as with AU 19219. 2 stanchion pockets centrally embedded in the floor, approx. 72 x 42 mm internal dimensions on positions 1 and 2 as per old Fliegl stanchion data sheet, as with AU 192198. Note: Stanchion pockets / plug-in stanchions are not designed for stand-alone load securing of long materials, pipes, etc. without lashing. Axles & Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-measured" for reduced tyre wear and fuel consumption. Axle spacing offset 1410/1310 mm (combined transport), up to 44-ton total combination weight. Air suspension, without lift axle. Laodpfx Ahjwhp A Doujc The photos are archive images; the vehicle may still be in use!

Stanje: rabljeno, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and secure warehouse storage. This heavy-duty racking system is ideal for warehouses, industrial facilities, and logistics companies needing stable and durable racking for Euro pallets. The proven PR600 design offers high load capacity, flexible configurations, and reliable performance in daily operations. Buying used means: certified brand quality at an attractive price – available immediately from stock for new builds, conversions, or the expansion of your racking system. Customisable: The rack frames (frame type P100 / P120) can be modified to your desired height – precisely and professionally in our workshop. We deliver tailored racking solutions for any storage requirement. PRODUCT DETAILS - Height: approx. 750 cm - Depth: approx. 105 cm - Length: approx. 1410 cm - Shelf load: 3000 / 3500 kg (depending on version) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, type INP100 or CE110 (box profile) - Beam colour: Blue - Frame type: P100 / P120, galvanised, pre-assembled - Levels: floor + 4 - Pallet spaces: 75 incl. floor level - Model: Used SSI Schäfer PR600 - Availability: available immediately from stock, multiple units available INCLUDED IN DELIVERY: - 6 × frames approx. 7.50 × 1.05 m, galvanised, pre-assembled - 40 × beams approx. 270 cm (INP100 or CE110) - 80 × locking pins Price: €1,800.00 net €2,142.00 gross You will receive an invoice with VAT shown. Laodjzf H Hfopfx Ahusc DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner forwarding agents – freight costs depend on postal code - Professional installation and dismantling by trained teams available as an option - Racking inspections according to DIN EN 15635 performed by certified inspectors - Inspection of existing heavy-duty racking from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding quotation – tailored to your specific requirements. Whether for new construction, conversion, or expansion – we provide expert advice on your racking configuration. SHOWROOM: Feel free to visit our showroom! On-site, you can get a comprehensive overview of our pallet racking, storage racks, and other solutions. Many systems are set up and can be experienced first-hand. Our expert advisors are on hand to answer your questions and offer personalised advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers & product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily via message or phone call. Our telephone number is available on our company page. ☎️ We are available by phone Monday to Friday, 08:00 – 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Stanje: rabljeno, Used pallet racking systems from SSI Schäfer rank among the most popular solutions for efficient and secure storage. This heavy-duty rack system is ideal for warehouses, industrial settings, and logistics companies that require robust and durable shelving for storing Euro pallets. The proven PR600 design offers high load capacity, maximum flexibility, and is perfectly suited for storing goods with substantial weight. Purchasing used means: certified brand quality at a particularly attractive price – immediately available for new builds, conversions, or expansions of your existing racking system. Customizable: The frame uprights (Type P120) can be modified to your desired height – precisely and professionally carried out in our workshop. We deliver bespoke racking solutions to meet every storage requirement. PRODUCT DETAILS - Height: approx. 490 cm - Depth: approx. 105 cm - Length: approx. 1410 cm - Shelf load capacity: 3,000 / 3,500 kg (depending on configuration) - Bay width: 270 cm (fits 3 × EPAL pallets) - Beams: 270 cm, Type INP100 or CE110 (box section) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 2 Lajdpfjzf Hvgsx Ahujc - Pallet positions: 45 including floor positions - Version: Used SSI Schäfer PR600 - Availability: Immediately available from stock, multiple sets in stock SCOPE OF DELIVERY: - 06 × Frames approx. 4.90 × 1.05 m, galvanized, pre-assembled - 20 × Beams approx. 270 cm (INP100 or CE110) - 40 × Safety pins Price: €1,080.00 net €1,285.20 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery within Germany via our partner freight forwarders – shipping cost depends on postal code - Professional assembly and disassembly by trained teams available on request - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking from other manufacturers also possible PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer – tailored precisely to your requirements. Whether for new installations, conversions, or extensions – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit our showroom! Get a comprehensive impression of our pallet racks, storage racks, and other solutions on site. Many systems are assembled and available for direct inspection. Our experts are available to answer your questions and provide tailored advice – we look forward to your visit! Haven’t found the right system yet? Visit our website for a quick overview of many offers & variations of this item! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Stanje: dober (rabljeno), Leto izdelave: 1995, Ohišje za deljene mere. Globina podlage za steklo na stran: 505 mm Višina od podlage za steklo: 2160 mm Nosilnost: 12.000 kg Maks. višina nalaganja: 2550 mm Globina: 1410 mm Višina: 2320 mm Širina: 3000 mm Stanje: dobro, rabljeno Lajdpfxszcm Hne Ahuoc

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802037879, lastna masa: 3.250 kg, največja dovoljena obremenitev: 34.750 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 6.790 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, multiple units available Chassis semitrailer for containers Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Lajdszbtnijpfx Ahusc Container mountings: 1 x 20-foot, flush with rear (Note! Reduced saddle load when carrying 20-foot containers) 24t, 2-speed landing gear, single-sided operation, with semicircular lower part and straight connection plate, with compensating slide 2 wheel chocks with holders Steel underrun protection Full-width rear mud flap Half-shell mudguards with anti-spray mudflaps in accordance with EC regulations Storage box for fire extinguisher up to 6 kg Fire extinguisher (ABC powder, 6 kg) Including stainless steel drip plate, centrally positioned on the rear container crossmember, approx. 290 mm wide Axles and suspension BPW disc brake axles, with 430 mm disc diameter "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport), up to 44t gross combination weight Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, actuated by "3x brake" (starting aid works up to 30% axle load exceedance and speeds up to max. 25 km/h) Braking system 2-line compressed air brake system Colour-coded piping for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24V EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that ensure ABS functionality! with lift & lower valve Vehicle stability system Axle load detection via EBS-CAN bus signal, display interface in cab (truck must be correspondingly pre-equipped, not installed in truck, not a calibrated scale) Wheels and tyres 385/55 R22.5" tyres, brand as per manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lamps, side yellow LED lighting 2 white LED position lights front 2 white/red lane marker lights rear 1 x 15-pin socket front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the cargo, it may not be achievable within the permissible axle, support or fifth-wheel loads. (Poor driving and tracking stability possible due to incorrect load distribution) Country of registration / plates Germany with Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline prepared for single-line number plate holder "A" warning sign for waste transport, foldable ADR approval for FL/AT with ADR warning sign at rear Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: RAL 2011 deep orange "10-year corrosion warranty" Support legs: coated black multiple units available

Stanje: pripravljen za uporabo (rabljen), Drejlenght 500 mm Drejdijametar preko kreveta 297 mm Drejdijametar preko suporta 160 mm Provrt vretena 36,0 mm Navoj DIN 55022 Gr. 5 Pinola: 3 MK Hod pinole 90,0 mm Broj obrtaja: 30 - 3550 o/min Broj obrtaja motora: 1410 / 2830 o/min Ukupna potrebna snaga 3,3 kW Napon 380 V Težina mašine cca 620 kg Dimenzije (D-Š-V) 1420 x 700 x 1200 mm iz srednje stručne škole – veoma dobro stanje (!!) posebno pogodna za srednje precizne delove za struganje Oprema: - robusni univerzalni strug sa navojnom i pogonskom vretenom - HEIDENHAIN 3-osni digitalni prikaz "VRZ 773" - RÖHM 3-viljuškasta stezna glava Ø 160 mm - preklopna zaštita za steznu glavu - ključ za glavu - MULTIFIX nosač alata A, sa 3 nova umetka - pomični konjić - zakretna mašinska lampa - kontrolna tabla, napred levo - automatsko pomeranje za planski i gornji support - postolje mašine sa vratašcima (prostor za odlaganje) - zaštita zadnje strane od prskanja strugotine Lasdpfoxmakysx Ahuec - taster za hitno zaustavljanje - uputstvo za upotrebu

Stanje: rabljeno, največja dovoljena obremenitev: 31.418 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2024, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.700 mm, Oprema: ABS, VEHICLE NUMBER: 2962 --- * Exterior Features: * Galvanized chassis * Curtain sider brand new * Front curtain tension ratchet * Sliding roof Schmitz Safety Roof (Edscha) * Pallet box for 24 Euro pallets * Plastic water tank 30 L * Toolbox * Spare wheel holder --- * Technical Specifications: * ROTOS axles with disc brakes * Lift axle on first axle * Axle distance 1410/1310 mm, up to 45t total gross weight * Tires: 385/65 22.5 * Tread depth in mm: 1st axle: 10/10, 2nd axle: 14/14, 3rd axle: 6/6 * 11 pairs of 6t and 5 pairs of 4t lashing rings in outer frame * Lashing point perforation in outer frame * Coil well 7,200 mm * Pallet stop on the right * Certificate for coil transport load securing Lasdpfxeyrkxge Ahuec * Certificate for load securing Code XL and beverages * 26 x aluminum slats, 6 x steel slats, 2 x locking bars * 2 pairs of coil securing supports * Fifth wheel height 1,150 mm * TÜV main inspection: 05/25, Safety Inspection: 11/25 --- * Lease-purchase example: €439 monthly rate, 60 months term, 10% down payment (your used vehicle can also be accepted as down payment), 10% final installment. * Delivery possible to your location. Trade-in / Leasing / Financing available. We make it happen!

Stanje: rabljeno, največja dovoljena obremenitev: 28.101 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2011, dolžina tovornega prostora: 13.625 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 91 m³, Oprema: ABS, * VEHICLE NUMBER: 2566 ----* Exterior features: * Galvanized chassis * Grab edge rails - suitable for pocket wagon loading * 4 pairs of ferry lashings for RoRo * Additional DUOMATIC air connection * Document box * ECE and GGVS labeling ----* Technical specifications: * BPW axles with drum brakes * Axle spacing: 1410/1310 mm * Lift axle on 1st axle * Tires: 385/65 R22.5 * Double-deck system with 22 loading bars * Load securing rails * Fifth wheel height: 1,150 mm * Unladen weight: 7,899 kg ----* Rental offer: €39 per day, duration as required, flexible return with no extra costs * Delivery to your location possible. Lasdjycnd Uspfx Ahujc Trade-in / leasing / financing. We make it possible!

Stanje: rabljeno, Leto izdelave: 2012, Automated Plant / Application Areas: Chrome plating, Nickel plating, Copper plating / Program Stages: Pre-cleaning, Pretreatment, Metallization, Post-treatment / Base Materials: ABS and ABSPC / Technical Data: Work window per carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per carrier, cycle time 3.00 min. per system, cycle time 2.50 min. for demetallization / Performance: 20 carriers per hour, clear anode/anode spacing (chrome) 700 mm, (copper) 700 mm, (nickel) 700 mm, clear entry dimension 550 mm (direction of travel), 3100 mm (width), bath dimensions (rinsing) 3100 mm x 700 mm / Power consumption: Drives: conveyor system 133 KW, filtration 194 KW, exhaust air 229 KW, wastewater plant 150 KW, control cabinets 704 KW, rectifiers approx. 3190 KW, heating power approx. 1410 KW / Consists of: automatic loading system with 135 carriers, 5 loading and unloading stations, wastewater treatment plant and exhaust air system / Tanks, electroplating baths, and exhaust air system made of chemically resistant plastics. NOTE: Various ongoing expansions and modernizations of the plastic electroplating facility since 2015! Lodpfx Aoy Rvtuehusac

Stanje: pripravljen za uporabo (rabljen), Drežna dolžina 500 mm Drežani premer nad ležiščem 297 mm Drežani premer nad podporo 160 mm Vrtina vretena 36,0 mm Pritrditev DIN 55022 Gr. 5 Konica: 3 MK Hod konice 90,0 mm Število vrtljajev 30 - 3550 min⁻¹ Število vrtljajev motorja: 1410 / 2830 min⁻¹ Skupna potrebna moč 3,3 kW Napetost 380 V Teža stroja cca. 620 kg Dimenzije D-Š-V 1420 x 700 x 1200 mm Iz šole za poklice – zelo dobro stanje (!!) Posebej primeren za srednje natančne obdelovance Oprema: - robusten stružni stroj z vodilnim in pogonskim vretenom - RÖHM trikrako vpenjalno glavo Ø 160 mm - preklopni zaščitni pokrov za vpenjalno glavo - ključ za vpenjalno glavo - MULTIFIX nosilec rezila A s 3 novimi vložki - pomičen konjiček - vrtljiva strojna svetilka - upravljalna plošča spredaj levo - avtomatski pomiki za čelni in zgornji suport - strojno podnožje z omaro (prostor za shranjevanje) - zaščitna zadnja stena proti ostružkom - gumb za nujni izklop Ledjxq Hhyspfx Ahusac - navodila za uporabo

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014072, lastna masa: 7.300 kg, največja dovoljena obremenitev: 27.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.530 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 3.330 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Chassis Semi-Trailer for Freight Forwarding Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" king pin, main frame reinforced for 25 t at the center of gravity over 3 m loading length in retracted condition 13 pairs of welded hooks on cross members for lashing strap attachment 23 pairs of recessed lashing rings in the outer frame, each rated 3.5 t 24 t 2-speed landing gear in reinforced version for uncoupling when loaded, single-side operation 1 spare wheel holder for 1 spare wheel 1 open storage compartment for stakes, with insertion option behind front wall for storage / or storage in compartment between extended main beams 4 pairs of recessed stake pockets in the outer frame, for square tubes 80x80 mm 5 stake pockets recessed centrally in the floor, for square tubes 80x80 mm, with reinforcement beams, each installed between the outer stake pockets except one 6 lashing/stake rails recessed crosswise in the floor over the full width to the outer frame (max. usable internal width between outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, distance between top and bottom approx. 60 mm (of the round steel). Bottom closed with angle plate, half open downwards. For lashing and plugging stakes, 80 x 80 mm. Rear pull-out ladder on right side in travel direction (FR) 5 x 3 pairs of stake pockets recessed in the outer sides of the main beams, for square tubes 80x80 mm, incl. reinforcement beams 10 “lightweight” plug-in stakes, W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with welded lashing points on both ends 2 plastic toolboxes, W=600 / H=425 / D=460 mm, lockable Telescoping Extendable by max. 4,000 mm, lockable at approx. every 500 mm Main frame telescopic Locking with pneumatic pin system + frame lock indicator on both sides, operated via hand button; control for brake/lock and suspension on left in travel direction (FR-left) in front of the axles Storage compartment between the main beams when extended Axles & Suspension SAF disc brake axles with 430 mm disc diameter Last axle is steered, with automatic reverse lock via reversing light and additional lock function on vehicle via hand button Axle spacing offset 1310/1410 mm Air suspension 1st axle with automatic lift, additionally electrically controllable from the truck, with start assist Braking System 2-line compressed air braking system Spring-loaded parking brake Lsdpfjza Dyysx Ahuoac 2 anti-mix-up coupling heads at front EBS Wabco, electronic braking system with EBS socket at front With raise & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in cab (truck must be equipped accordingly) Wheels & Tyres 385/65 R 22.5" steel rims Electrics 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white LED position lights at front 2 white/red LED lane guidance lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front 1 beacon with bracket, switchable via parking light 2 pairs of warning panels, LED illuminated and extendable to 3,500 mm Flashing side marker lights Side 7-pin sockets, positioned 2x at front panel, 2x at landing gear, 2x at rear underrun protection 1 additional 7-pin socket in the rear underrun protection 2 additional LED work lights, mounted top inside at front wall, with switch on front wall outside, left in travel direction (FR-left) Screen-printed wooden flooring approx. 30 mm thick 25 mm aluminium hol

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902028859, lastna masa: 5.660 kg, največja dovoljena obremenitev: 29.340 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, barva: rdeča, Chassis Semi-Trailer for Freight Forwarding Steel welded construction in reinforced design, only two longitudinal beams as double T-beams with steel/checker plate between the beams. Fifth wheel plate with replaceable 2" king pin. Protective cover for rear lights. 8 pairs of lashing rings, bolted or welded to the frame as per manufacturer’s choice. 24 t two-speed landing gear, single-sided operation, with straight base, without compensating leg. Wheel chocks with holders. Side underrun protection in aluminium. Rear underrun protection in galvanized steel. Half-shell mudguards with anti-spray flaps according to EC specifications. 1 spare wheel holder for 1 spare wheel, incl. wheel fixing kit. 1 toolbox recessed between the longitudinal beams. 8 wooden stake pockets, as per manufacturer’s preference, bolted onto the frame, each with 2 telescopic wooden stakes adjustable from 1800 mm to 2800 mm, 7 t per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift & lower valve, axle safety cables. First axle with automatic lift, incl. forced lowering and start assist, activated by “3x brake” (start assist functions up to 30% axle overload and up to 25 km/h). Axle spacing offset 1410/1310 mm (suitable for combined transport) up to 44 t gross train weight. Wheels and Tyres 385/65 R 22.5" Manufacturer’s choice. Steel rims, factory silver. Brake System 2-line compressed air brake system. Spring-type parking brake. Axle load detection via EBS CAN-bus signal for display in truck cab (truck must be equipped accordingly, no truck installation, not a verified scale). 2 front coupling heads, non-interchangeable, without connection line. EBS (Electronic Braking System) with front EBS socket, without connecting cable. Note: The trailer may only be towed by tractors that can guarantee ABS effectiveness! “Safe Parking.” Electrical System 24 Volt, multi-chamber tail lights, side LED marker lamps in yellow. 2 white position lamps front. 2 white/red lane-control lamps rear. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cables. Front Bulkhead/Corners Steel/mesh bulkhead, approx. 2,300 mm high, bolted to frame. Ledsza Anvopfx Ahujac Approval / Signage Registration country: Germany Type approval according to EC 2007/46 Prepared for single-row license plate holder Contour marking with reflective tape per ECE R 048, white on sides, red at rear Warning sign per ECE-70 Paintwork Frame: DB 7350 Novagrau Landing gear legs: black coated Bulkhead: hot-dip galvanized

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802035478, lastna masa: 4.660 kg, največja dovoljena obremenitev: 33.340 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.450 mm, skupna širina: 2.550 mm, skupna višina: 1.325 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5", stanje pnevmatik: 100 odstotek, barva: sivo-črna, Chassis Semi Container Fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin and two kingpin positions Front locking on tipper ram mounting bracket with positioning wedges on both sides; rear locking via continuous rotary shaft with return spring Without subframe for self-supporting containers Container mounts: Locking crossbeams, dual, for securing 1 x 30 ft container 24 t, two-speed landing gear, single-sided operation, with straight lower part, without thrust compensation Free landing gear foot spacing or rear swing clearance approx. 1850 mm 2 wheel chocks with holders Side underrun protection, aluminum Without rear underrun protection Half-shell mudguards With anti-spray flaps according to EC standard Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. Ljdpfxozaz Tks Ahuoac (without hose connection). Note: Tipping angle limited! Operated hydraulically via truck PTO Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles & Suspension BPW disc brake axles with 430 mm disc diameter "Axles/chassis laser-measured" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (intermodal transport) up to 44 t gross combination weight Air suspension 1st axle automatic lift axle, including forced lowering and drive-off aid, operation via "3x braking" (Drive-off aid is functional up to an axle overload of 30% and up to max. speed of 25 km/h) Brake system 2-line compressed air brake system Color-coded pipe routing for easy service Spring-actuated parking brake 2 error-proof coupling heads at the front, without connecting line 24 volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift and lower valve Vehicle stability control system Axle load detection via EBS CAN-bus signal, for display in the driver's cab. Truck must be appropriately prepared, no truck installation (not a certified scale) Wheels and Tires 385/55 R22.5, brand at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber lights, side-mounted yellow LED lighting 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin error-proof sockets at front, without connecting cable Registration country / License plates Germany Approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white at sides, red at rear Paintwork Frame: DB 7350 Novagrau "10-year warranty against rust-through" Landing gear: black coated

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34202034509, lastna masa: 4.790 kg, največja dovoljena obremenitev: 33.210 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 12.660 mm, skupna širina: 2.550 mm, skupna višina: 1.150 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, barva: rdeča, 3-axle container semi-trailer Gooseneck Type: SDS 420 Rigid 40" Chassis Semi-trailer for containers Lsdpfx Aozazznjhueac Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions Container mounts: 1 x 20-foot centered without steel/chequer plate flooring at the rear 2 x 20-foot, 1 x 40-foot with gooseneck tunnel Front crossmember with folding locks (not available for front extension), supplied free of charge Transport of filled tank containers is excluded. No rear height adjustment and no foldable center supports, transport of container without tunnel not possible. 24 t, 2-speed landing gear, single-sided operation, with semi-round lower part for compensation Make: Jost 2 wheel chocks with holders Side underrun protection Rear underrun guard Half-shell mudguards With anti-spray flaps according to EC Rear impact guard Axles + Suspension BPW drum brake axles "Axle/chassis laser alignment" Reduces tire wear and fuel consumption Axle spacing 1310/1410 mm Air suspension Braking system 2-line compressed air brake system Colored pipe layout for easy service Spring-loaded parking brake 2 fail-safe coupling heads in the front, without connecting line EBS make Haldex, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lifting & lowering valve Vehicle stability system Axle load detection via EBS CANbus signal, for display in the driver's cab, truck must be prepared accordingly – not installed (no calibrated scale) Wheels and tires 385/55 R22.5" Make Fulda with M+S marking Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable 2 additional LED work lights, rear both sides, switched via reversing light Operating instructions Note: Transport of filled tank containers is excluded! Registration country / plates Germany With Dekra inspection and certificate (according to §13 EG - FGV) Prepared for single-line number plate holder Warning plate according to ECE - 70 ADR warning plate at rear, foldable Contour marking with reflective strips according to ECE R 048, yellow on the sides and red at the rear Paintwork Frame RAL 3020 Traffic red "10-year warranty against rust-through" Landing legs black coated

Stanje: rabljeno, lastna masa: 4.760 kg, največja dovoljena obremenitev: 13.240 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/1997, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.480 mm, skupna dolžina: 2.500 mm, skupna širina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22,5, medosna razdalja: 1.410 mm, barva: modra, prevoženi kilometri: 1.001 km, vrsta goriva: dizel, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 2 osi, BPW osi, tandem, zračno vzmetenje, dvigovanje+spuščanje, ABS (protiblokirni sistem), Edscha, nizek priklop. Medosna razdalja: 1410 mm. Prikolica se lahko za doplačilo predela na -normalno- priklopno višino. Standardna višina cca 1,00 m. PODATKI O DODATNI OPREMI BREZ JAMSTVA, spremembe, vmesna prodaja in napake pridržane! Ljdpfx Ahei Rm Ihoujac

Stanje: rabljeno, prevoženi kilometri: 471.271 km, moč: 185 kW (251,53 KM), prva registracija: 06/1995, vrsta goriva: dizel, lastna masa: 11.000 kg, največja dovoljena obremenitev: 7.000 kg, skupna masa: 18.000 kg, velikost pnevmatike: 13R22.5, konfiguracija osi: 4x4, medosna razdalja: 3.800 mm, barva: oranžna, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, vzmetenje: jeklo, število sedežev: 3, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 600 mm, Oprema: dodatne luči, kabina, pogon na vsa štiri kolesa, servovolan, spojka prikolice, zapora diferenciala, žerjav, Vehicle location: Bovenden, steel body, short cab, double seat bench, rear window, sun visor, 12 switches, PTO, differential lock, work lights, leaf suspension, trailer coupling with air, electrics, and hydraulics, winter service equipment, underrun protection, swing tailgates, crane mounted behind cab, emergency stop, grab control, foldable, mechanical 2-point outrigger supports, 2x hydraulic extensions. Lajdpjvhkimefx Ahuec Wheelbase: 3800 mm Body: 3-way tipper body with Palfinger PK8000 A crane. Ex-municipal administration! Load chart: 3.6 m – 2130 kg, 5.4 m – 1410 kg, 7.2 m – 1050 kg. Grab available at extra charge! ACCESSORY INFORMATION PROVIDED WITHOUT WARRANTY. Subject to change, prior sale, and errors!

Stanje: rabljeno, Leto izdelave: 1988, Tlak 160 t Razdalja med stebri 1600/1420 mm Hod 345 mm Razdalja miza/iztiskovalec, velik hod zgoraj, nastavitev zgoraj 830 mm Delovna površina mize 1460 x 850 mm Višina mize nad tlemi 1100 mm Stranski prehod med stebri 770 mm Površina iztiskovalca 1410 x 850 mm Hitrost spuščanja 540 mm/s Hitrost dviga 520 mm/s Delovna hitrost 26 - 85 mm/s Ledpoyx Ilfefx Ahujac Vsebnost olja 2100 l Moč pogona 45,0 kW Teža 23,0 t Potrebni prostor (ŠxGxV) 4,0 x 2,3 x 4,9 m Z oljnohidravličnim pogonom, zapora iztiskovalca

Stanje: novo, Naprodaj nov motoreduktor priznanega nemškega podjetja SEW Eurodrive. Naprava je nova, neuporabljena, iz skladišča. Popolno stanje, pripravljena za montažo in obratovanje. Tehnični podatki Proizvajalec: SEW Eurodrive Model: KA67 DT90L4 BMG HF TF ES16 Moč: 1,5 kW Hitrost motorja: približno 1410 obr/min Izhodna hitrost: približno 29 obr/min Prenosno razmerje: i 48,77 Napetost: 220–240 V in 380–415 V Ledpfx Ahjyv R Nuoujac Frekvenca: 50 Hz Stopnja zaščite: IP65 Izolacijski razred: F Elektromagnetna zavora: BMG Stanje Novo, neuporabljeno Možne minimalne sledi skladiščenja Popolnoma delujoče Uporaba Transportni trakovi Proizvodne linije Industrijski stroji Avtomatizacija Motoreduktorji SEW Eurodrive so v svetovnem vrhu – jamčijo zanesljivost in dolgo življenjsko dobo. Vrhunska nemška kakovost.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Vacuum press, vacuum table, Joos vacuum table with silicone membrane Universally applicable press, veneer press for veneering, laminating, form bonding, forming veneers, edge banding, etc. With this press, you can largely do without a hydraulic veneer press, albeit with some limitations. Laodjy Hl Hpjpfx Ahusc Fitted with a new heat-resistant silicone membrane, extremely stretchable and easy to clean. Also suitable for thermoplastic forming of preheated materials such as acrylic glass or solid surface materials. Frame internal dimensions approx. 2900 x 1410 mm, usable area approx. 2800 x 1300 mm Working height approx. 900 mm Vacuum pump Becker VT4.40, 400V, 1.5 kW, output of 40 m³/h, with two vacuum reservoirs each of 200 liters, allowing for comfortable operation and fast evacuation. Electronic vacuum pressure switch: the pump switches off automatically once the required vacuum is achieved and does not run continuously. Mobile on four lockable swivel casters. Frame can be opened easily, locked with two latches. Double frame for quick membrane replacement. Currently fitted with a new silicone membrane. Fast vacuum distribution via grooved base plate. CE marking. Original paint, with some areas touched up. The silicone membrane and base plate have been renewed, the machine is immediately ready for use. Dimensions approx. 3100 x 1550 x 1020 mm (LxWxH). Weight approx. 550 kg. The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see “Further offers from this supplier.”

Leto izdelave: 1994, stanje: dober (rabljeno), Dizelski viličar, dizelski viličar s štirimi kolesi, 4-kolesni viličar Laodpszbla Refx Ahuoc -Proizvajalec: Hyster, dizelski 4-kolesni viličar tip 4.50 XL -Nosilnost: 4500 kg -Dvižna višina: 2820 mm -Dolžina vilic: 2000 mm, prečni prerez 150 x 60 mm -Delovne ure: 9473 h -Dimenzije viličarja: 3160/1410/V2225 mm -Teža: 6900 kg

Stanje: rabljeno, Nooteboom tieski prikolica na prodaju. ✅ Sve funkcioniše ✅ Nov TÜV (tehnički pregled) ➡️ Kočnice nedavno zamenjene ➡️ Godina proizvodnje: 2004 Laodpfx Ajyx Tppehuoc ➡️ Širina: 2,70 m, proširiva na 3,30 m ➡️ Visina utovara: 50 cm ➡️ Visina vožnje: 45 cm sa 5 cm klirensa ➡️ Na izvlačenje i moguće odsasati ➡️ 3 osovine, zadnje hidraulično upravljive po visini, kao i prednje ➡️ Pneumatici: 90% i 70% preostalog gazeca sloja ➡️ Sa daljinskim upravljačem na kabl ➡️ Mogućnost upravljanja sa zadnje strane za precizna parkiranja ➡️ Udubljenje za bager ➡️ Težina prazne prikolice oko 14.000 kg (tehnički) ➡️ Moguća nosivost 40.000 kg Neto cena: 54.000 € SCANIA kamion je takođe na prodaju (vidi oglase). Takođe prodajemo i DVOOSOVINSKU prikolicu! ➡️ 30 cm duboka platforma ➡️ 8,6 m dužina duboke platforme ➡️ 30 cm može da se odvoji ➡️ Hidraulična, sa oslanjanjem ➡️ Na izvlačenje do 2,5 m Za neto cenu 45.000 € Slike šaljemo na zahtev. Zadržavamo pravo na greške. Slike i opis mogu odstupati.

Stanje: rabljeno, Vertikalna rezkalna glava, rezkalna glava z motorjem THIEL Vpenjalna glava orodja: MK 5 (Morse konus velikost 5) Hod pinole, pomik vretena: 80 mm Hitrost vretena pri hitrosti motorja 1410 min⁻¹ = 490 / 780 / 1200 min⁻¹. Ledpfx Aoxddwrohueac Hitrost vretena pri hitrosti motorja 2950 min⁻¹ = 970 / 1530 / 2380 min⁻¹. Prehod vretena: 37 mm Moč motorja: 1,4 / 1,8 kW Hitrost motorja: 1410 / 2850 min⁻¹. Omrežna priključitev: 400 Volt, 50 Hz - Hitrost vretena preko 2 hitrosti motorja in 3 pasovnih stopenj - Montažna prirobnica rezkalne glave Ø 215 mm z 2 izvrtinama Ø 15 mm, razdalja med luknjama 180 mm - primerna za orodja z vijačnim privlačnim navojem (izbijalno jeziček ovira vpenjanje) Potrebni prostor D x Š x V: 450 x 400 x 350 mm Lastna teža: 61 kg Dobro stanje

Stanje: rabljeno, Disc sanding machine with spindle sanding unit KURT EHEMANN Type V K8 Combined drum sander - double grinding machine, dowel sanding machine Machine no. 6812420 Year of manufacture: 1968 Disc diameter: 800 mm Table support at sanding disc: 900 x 300 mm Disc speed: 940 rpm Table height (sanding disc): 900 mm Spindle sanding unit with sanding sleeve Ø 50 mm Table support (spindle sanding unit): Ø 500 mm Table height (spindle sanding unit): 1000 mm Spindle sanding speed: 1410 / 2420 rpm, 2-speed pole-changeable Motor power disc: 3 kW Motor power spindle: 1.1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Tiltable disc sanding table: 30° downward / 15° upward - The entire table can be swung away from the disc for abrasive change - Spindle sanding unit with reversible rotation (1410 rpm clockwise, 2420 rpm counter-clockwise) - Spindle sanding unit with oscillating stroke movement, 10 mm - Sanding spindle height-adjustable within the table Lasdpfx Aherk U Edsujc - Spindle sanding unit with tiltable round table, tiltable approx. 30° - Round table with removable segment inserts Ø 54 / 84 / 308 mm - Duct connection for extraction unit, rectangular 100 x 170 mm Space requirement (L x W x H): 1500 x 1100 x 1400 mm Weight: 550 kg Very good condition

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802035390, lastna masa: 3.160 kg, največja dovoljena obremenitev: 34.840 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2024, naslednji pregled (TÜV): 03/2027, skupna dolžina: 7.690 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: siv, The images shown are archive photos! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin (chassis prepared for retrofitting, collection tray, 4 x hose support, tread plates, Fliegl standard) Container mounts: - 1 x 20-foot center position (or swap body containers 7.15 / 7.45 / 7.82), non-retractable at the front, container lock twist locks in the longer version. - 24-ton 2-speed landing gear, single-sided operation, with semi-circular base and flat mounting plate, equipped with stroke compensation - Wheel chocks with holders - Side underrun protection - Rear underrun protection with deep step for easier access + inner tread plate - Half-shell fenders - With anti-spray mud flaps according to EC Axles & Suspension: - BPW or SAF disc brake axles, according to manufacturer’s choice, with 430 mm disc diameter - "Axle/chassis laser measurement" to reduce tire wear and fuel consumption - Offset axle spacing 1410/1310 mm (intermodal transport) suitable for up to 44t gross train weight - Air suspension - 1st axle with automatic lift, including forced lowering and traction aid, operated by "brake pedal 3x" (traction aid function active up to 30% axle overload and max. speed of 25 km/h) Braking System: - 2-line compressed air braking system - Color-coded hose routing for easy servicing - Spring-loaded parking brake - 2 foolproof coupling heads at the front, without connector hose - 24V EBS (Electronic Braking System) with EBS socket at the front, without connecting cable - Note: This trailer may only be towed by tractor units that ensure the functionality of the ABS! - Includes raise & lower valve + auto-reset function - Vehicle stability program - Axle load detection via EBS CAN bus signal, display possible in the driver’s cab if the truck is equipped accordingly, no truck-side installation (no certified scale) Wheels & Tyres: - 385/65 R22.5, brand as per manufacturer’s choice - Steel rims, factory silver Lodpjy Tvuwefx Ahusac Electrics: - 24V, multi-chamber LED light clusters, yellow LED side marker lights, LED license plate illumination (Note: on certain tractor units, fault messages may occur even though all functions are working) - 2 white LED front position lights - 2 white/red LED lane marker lights at the rear - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connecting cables - Additional LED work lamp at the rear, controlled by the reversing light Operational Notes: This vehicle may only be loaded with 20’ tank containers compliant with ISO 668 and especially ISO 1496-3! The tank containers must have end-load-transfer areas ("end cross member load transfer areas")! Country of Registration / Plates: - Germany - With Dekra inspection and certificate (according to §13 EC-FGV) - 24/7 service hotline - Prepared for single-line license plate holder - Warning panel according to ECE-70 - Contour marking with reflective tape in accordance with ECE R 048, white on the sides, yellow at the rear The images shown are archive photos! The vehicle may still be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802030369, lastna masa: 31.110 kg, največja dovoljena obremenitev: 34.889 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2022, naslednji pregled (TÜV): 01/2027, skupna dolžina: 7.390 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: rdeča, The images are archive photos; the vehicle may still be in use! Ljdpoy Tvphofx Ahuoac Fine-grain steel welded construction, kingpin plate with exchangeable 2" kingpin, container mounts: 1 x 20-foot container (centered) or swap body container 7.15 / 7.45 m, front not retractable, extended version twist locks for container securing. 24-ton, 2-speed landing gear, one-sided operation, with straight lower section, without compensating ram. Wheel chocks with holders, side underrun protection, aluminium rear underrun protection, with anti-spray mudflaps according to EU regulations, stainless steel (VA) drip tray with 1 1/4-inch drain pipe + 1 1/4-inch shut-off valve, including drip plate, with perforated step plates approx. 400 mm wide, left & right between drip tray and longitudinal frame. Hose trays approx. 4500 mm long (incl. hose compartment) for pipe holders 2 x DN 200 external + 2 x DN 160 centered, rear hose compartment (VA steel) 300 mm deep, splash-proof, lid (VA steel) all around with rubber seal, with drain hole at lowest point, then lidless on hose pipes, stainless steel grounding lug rear in FR-right on frame with international grounding sticker on frame, rear right rear access steps on underrun protection, at main frame rear outer FR-right: step plate approx. 260 mm long and 300 mm wide. Axles & suspension SAF disc brake axles, "axle/chassis laser aligned" to reduce tire wear and fuel consumption, staggered axle spacing 1410/1310 mm (combined transport) up to 44 tons GCW. Air suspension, first axle automatic lifting axle, including forced lowering and start assist, operated via "3x brake activation" (start assist operable up to 30% axle overload and speeds up to max. 25 km/h). Braking system 2-line compressed air braking system, color-coded line routing for easy service. Spring-loaded parking brake. 2 non-interchangeable coupling heads at front (without connecting line), EBS electronic braking system with EBS socket at front (without connecting cable). Note: The trailer must only be towed by tractor units that ensure proper ABS functionality! With raising and lowering valve, vehicle dynamic stability control. Axle load detection via EBS CAN-bus signal, for display in the driver cab (truck must be pre-equipped, no truck installation). Wheels & Tyres 385/65 R22.5, manufacturer’s brand of choice, steel rims, factory silver. Electrics 24 volt, multi-chamber tail lights, side yellow LED lighting, 2 white position lamps at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin socket at the front (without connecting cable). Operating Notes The total permissible weight stated is technically possible; however, depending on the load, the total weight may not be achievable while adhering to permissible axle, kingpin and saddle loads (poor handling may result from incorrect load distribution). This vehicle must only be loaded with 20’ tank containers compliant with ISO 668 and specifically ISO 1496-3! The tank containers must have "end-load-transfer areas". Approval/Country/Signs Warning sign according to ECE-70, ADR inspection as per 9.1.1.2 of ADR, EX/II, EX/III, approval certificate for vehicles transporting certain dangerous goods (ex. B3), with warning sign at the rear (not valid for substances according to UN 0331 and 0332 – explosives B-E), contour marking with reflective strips as per ECE R048, white at sides, yellow at rear.