Inox Behälter Gmbh Rezervoar Za Mešanje Z Rezervoarjem Za Paličasto Mešalo nakup rabljenega (123.846)

Stanje: rabljeno, Leto izdelave: 1986, Stroj (dodatek): 3 hladilni rezervoarji Kapaciteta: 205 hl Obratovalni nadtlak: 0,3 bar Širina: cca 2,8 m Ijdpfx Aloxbql De Njia Višina: cca 4,2 m Položaj: pokončno Osnovna konstrukcija: na nogah Oprema: Moški odprtina; Hladilne cone; Dušilni aparat; Ventil za odvzem vzorcev

Leto izdelave: 1992, stanje: rabljeno, Stroj (dodatek): 6 hladilnih rezervoarjev Kapaciteta: 164 hl Obratovalni nadtlak: 0 bar Iisdsw Tmqzjpfx Al Nja Širina: ca 2,05 m Višina: ca 6,2 m Položaj / postavitev: Pokončno Osnovna konstrukcija: Na nogah Oprema: Človekova odprtina, 2 hladilni coni, ventil za vzorčenje, varnostni ventil z indikatorjem tlaka, vakuumski ventil.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t Iiodpfx Asu Tha Ijl Nja System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.070 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, vrsta hlajenja: zrak, vrsta nastavitve višine: električni, dolžina območja skeniranja: 175 mm, širina območja skeniranja: 175 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 500 mm, pomik po osi Z: 350 mm, valovna dolžina laserja: 1.070 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, premer ekstrakcijske šobe: 50 mm, delovna širina: 175 mm, Oprema: kabina, SK LASER KOLLTRONIC F20iW1 · IPG MOPA 20 W · XXL Workstation · X/Y/Z Motion System Laser Protection Class 1 · CE Certified · Made in Germany System Concept: - Brand-new complete system, consisting of an IPG MOPA fiber laser 20 W and XXL workstation for productive operation. The workstation is equipped with a removable central worktable; the floor area beneath the table is freely accessible. XXL Workstation: - Sit/stand workstation with ample legroom - Aluminum housing - Bright work lamp, extraction port DN50 - Side and front doors: left and right sides, front door with slot - Doors with sensor monitoring, safety features: emergency stop, interlock, safety relay Axis System – SK LASER X/Y/Z Motion: - Traverse with 2 motorized Z-axes and rotary axis - X-axis 500 mm, computer-controlled - Y-axis 2 × 500 mm, computer-controlled Ijdpfxoyizvwj Al Njia - Z-axis 350 mm, computer-controlled (travel range depends on configuration) - Two spindles per axis for increased stability - Axis controller - Made in Germany Laser – IPG MOPA Fiber Laser: - Output power: 20 W - Peak power: 1 mJ at 20 kHz - Pulse duration: 2–350 ns, MOPA (suitable for plastics) - Wavelength: 1060–1070 nm - Pulse frequency: 20–80 kHz - Beam quality M² < 1.6 - Air-cooled, power consumption < 400 W - Red pilot laser + 2 distance lasers (650 nm,

Stanje: novo, EROWA vpenjalni zatič F/A Inox (1 komplet = 20 kosov) ER-007980, nov in originalno zapakiran Isdpfxox Tr Awe Al Njia

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 2.795 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.500 mm, moč črpalke: 2.200 W, Stroj je bil obnovljen leta 2026 in vzdrževan vsakih 500 obratovalnih ur! TEHNIČNI PODATKI Delovno območje X-os: 1.500 mm Delovno območje Y-os: 1.500 mm PODROBNOSTI O STROJU Isdpfxoyzz N Aj Al Nsia Moč črpalke: 22 kW (30 KM) Zadnja obnova črpalke: pred 3 obratovalnimi urami OPREMA Rezervni deli Računalnik Sistem za mehčanje vode

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,300 Leasing rate: €1,045.17 Bending length: 2,550 mm Sheet thickness (420 N/mm²): 2.5 mm Max. sheet thickness - stainless steel: 1.5 mm Max. sheet thickness - aluminium: 3.5 mm Drive: motorized Length: 3,830 mm Width: 2,200 mm Height: 1,900 mm Weight: 4,050 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING - 15.6" touchscreen on swiveling arm - Tabular programming by entering respective axis values - Open or closed folding function - Multi-radius functions for folding or bending - Programming of material quality, sheet thickness, spring-back, bending corrections and creation of a database for various material types, sheet thicknesses and lengths - Piece counter Ijdpswiq A Uofx Al Neia - Password authorization - 128GB HDD, allowing virtually unlimited storage capacity - Remote maintenance via WiFi - Detailed alarm, tool and parameter page Motorized drive (servo motors) for upper beam and bending beam (Z and Y axis) Motorized backgauge (X axis) with servo drive, 1,000 mm, rectangular configuration, with ball rollers in the sheet supports Upper beam opening: 220 mm (without tools) Manual adjustment of bending beam: 35 mm Upper beam with 45° geometry Continuous upper tool rail 20° with R1 2 pcs. Bending beam rails (7 or 10 mm, 15 or 25 mm) Front light curtain safety system Triple foot pedal OPTIONS: - Segmented gooseneck rails - Pneumatic tool clamping - Segmented lower and bending tools - Servo drive for the bending beam - Manual crowning system - Second foot pedal - Side stop - Rear light curtain safety system - 2D or 3D graphic control - PC software - Special omega geometry for lower and bending tools - Tapered backgauge - Backgauge extension - Vacuum holders

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, uporabna dolžina reza 5000 mm premer rezil 500 mm elektronski naklon glav ot notranjega do zunanjega naklona od 22°30′ do 135° možnost rezanja korak za korakom etiketirka Iijdpfx Aley Dva Is Noa

Stanje: novo, Leto izdelave: 2026, Stanje novo Leto izdelave 2026 Številka skladišča 080200 Dobavni rok maj 2026, vmesna prodaja pridržana Država porekla Turčija Cena 5900 € Leasing obrok 113,87 € Dolžina upogibanja 1250 mm Debelina pločevine (420 N/mm²) 1,25 mm Najv. debelina pločevine - nerjaveče jeklo 0,8 mm Najv. debelina pločevine - aluminij 2 mm Najv. kot upogibanja 150 ° Zadnji prislon ročni 500 mm Najv. odprtost brez orodja 200 mm Dolžina 1500 mm Širina 750 mm Višina 1715 mm Teža 315 kg Zgornje orodje deljeno, 45° Območje nastavitve upogibne gredi 35 mm Deljeno zgornje, spodnje in upogibno orodje iz 42CrMo4 - kaljeno na 60HRC Ročni zadnji prislon Prilagodljiv kotni prislon Predal in škatla za orodje Stroj na zaklepnih kolesih Iodpfx Aowirc Aol Njia Navodila za uporabo v nemščini ali angleščini

Stanje: novo, Leto izdelave: 2024, Stanje: novo Leto izdelave: 2024 Številka zaloge: 8310 Dobavni rok: takoj, vmesna prodaja možna Država izvora: Tajvan Cena: 50.700 € Leasing obrok: 958,23 € Na zalogi: 1 Dolžina upogibanja: 2035 mm Debelina pločevine (420 N/mm²): 3,5 mm Pogon: hidravlični Maks. kot upogiba: 135° Dolžina: 3000 mm Širina: 1100 mm Višina: 1750 mm Teža: 2200 kg NC upravljanje z izbiro kota upogibanja Ročni zadnji prislon: 600 mm Hidravlični pogon Vertikalno premikanje zgornjega nosilca Isdpfxowiqvnj Al Njia Segmentirano orodje za zgibanje 'gosji vrat' 30°, višina 110 mm s hitrim menjanjem Orodje za upogibanje: 30 mm Oprema v skladu s CE predpisi

Stanje: novo, Stanje: novo Dobavni rok: približno 6 mesecev po naročilu Država izvora: Tajvan Cena: 42.100 € Iiodpfowva H Ajx Al Nja Leasing obrok: 804,11 € Dolžina upogibanja: 2035 mm Debelina pločevine (420 N/mm²): 3,5 mm Pogon: hidravlični Maks. kot upogibanja: 135° Dolžina: 3000 mm Širina: 1100 mm Višina: 1750 mm Teža: 2450 kg Hidravlični pogon NC krmiljenje za predizbiro kota upogibanja Ročno nastavljivo zadnje ležišče 600 mm Neprekinjena konična tračnica 45° Dodatni kota 75 mm Mehanska nastavitev končnega položaja vpenjalne čeljusti Nastavljiva vpenjalna sila Oprema v skladu s CE predpisi (Simbolična fotografija) ALTERNATIVA: Različica AMH-K z DELJENO konično tračnico 45° OPCIJA (CENA NA ZAHTEVO): NC krmiljenje z 2 osema in 7" zaslonom na dotik, vključno z motornim zadnjim ležiščem 800 mm.

Stanje: rabljeno, Stroj za zgibanje Heidelberg Stahlfolder TD 66/6-4-4 z okroglim podajalnikom. Leto izdelave: 1996 - Serijska št.: 66748/95-225117. Največja delovna širina: 660 mm. Tip zgibanja: 6 - 4 - 4. Izmet v toku. Priložena navodila za uporabo. Spletni video-pregled preko WhatsApp, MS Zoom ali Telegram. Na zalogi v Emskirchen/Nürnberg – Na voljo takoj – Možnost preizkusa. Iisdpfx Asy Akwrjl Nsa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Ijdpfxjt Dx U So Al Noia Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: rabljeno, Multicar M25 Year of manufacture: 1986 - with water tank (water tanker body) - with spreader body Iedpfxjv Dwraj Al Nsia

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Ijdpfx Aljfh Tmmo Neia Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Leto izdelave: 2016, obratovalne ure: 7.000 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naprodaj Terra Select T60 na goseničnem podvozju Letnik 2016 z približno 7.000 delovnimi urami JCB motor 81 kW brez AdBlue Iiodpfx Ajy Ahi Eel Nsa Dolge izhodne transportne trakove Izredno velik dozirni lijak Boben 2.200 mm x 5.500 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, število ravnalnih valjev: 3, višina izdelka (maks.): 1.300 mm, skupna dolžina: 1.700 mm, skupna višina: 980 mm, skupna širina: 600 mm, delovna širina: 1.300 mm, največja širina izdelka: 1.300 mm, skupna masa: 160 kg, trajanje garancije: 24 meseci, moč: 1,5 kW (2,04 KM), vrsta aktuacije: električni, W11G - maksimalna debelina materiala 1,5 mm, z menjalnikom Iodpfx Aoymc Szsl Njia

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2026, trajanje garancije: 3 meseci, vhodna napetost: 400 V, Certificirano po DGUV do: 05/2027, električna varovalka: 16 A, vhodna frekvenca: 50 Hz, Stroj za stepanje, mešalnik TOP Rego model: SM 2000 M Stroj, kadar gre za stepanje! z avtomatskim časovnikom 2 delovni funkciji: 1 x mešanje / 1 x stepanje 1 mešalna metlica, 1 metlica za stepanje 1 32-litrski inox kotel Osvetlitev kotla Priključek 400V, vtikač 16A-CEE Kakovost iz strokovnega obrata! Rabljeni stroj, obnovljen z garancijo in servisom rezervnih delov Opcija: dodatna oprema krožni plinski gorilnik vzdrževalna pogodba servisni paket dostavna storitev uvod / zagon Druge vrhunske mešalnike na zalogi! Iijdpfx Alsw Hk Daj Nsa

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 13.000 kg, dovoljena osna obremenitev (os 2): 13.000 kg, dovoljena osna obremenitev (os 3): 13.000 kg, prva registracija: 07/1983, dolžina tovornega prostora: 11.870 mm, širina tovornega prostora: 2.500 mm, vzmetenje: parabolično listje (vzmet), barva: bela, Leto izdelave: 1983, Polpriklopnik CTC ZA90SRT47 Nizkopodni 11,87 m s hidravličnimi rampami in vitlom (4,10 m + 7,35 m) 3 osi Parabolično vzmetenje Iedpfx Aljy Axufs Noia Dovoljena skupna masa 47.000 kg – nosilnost 39.000 kg Za specialne prevoze, dovoljena skupna masa kompozicije 56.000 kg Neto izvozna cena: 18.000,00 EUR Vse informacije brez garancije/ možnost napake pridržana.

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Stroj za pranje kovin ILSA IK20 za modificiran alkohol (topilo) Ijdpfoyztxiex Al Nsia Enokoš V dobrem stanju Možnost preizkusa

Stanje: novo, Leto izdelave: 2025, The high-speed mixers of the SPT-SHM Series are designed for mixing dry powders for tablets and capsules, and can also be used for wet granulation (pre-processing stage for tablet and capsule powders). All product-contact parts are made of SS 316L stainless steel. Other parts are made of SS 304. Iedpfx Aoh Im D Tsl Noia The machines comply with GMP guidelines and are CE certified. The performance of the machine depends on the product.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 2 h, Funkcionalnost: popolnoma funkcionalen, Cable Granulation Plant GUIDETTI SINCRO MILL 530 + Pre-Shredder PMG-H 900 – immediately available – as new For sale is a high-quality cable recycling plant from the Italian manufacturer Guidetti, consisting of: • Guidetti Sincro Mill 530 cable granulation unit • Guidetti PMG-H 900 pre-shredder • External filtration unit The system was installed at a customer's site, tested, and subsequently properly dismantled. Due to a project change, the plant is now being offered. Condition: nearly new (test operation only) Availability: immediately from stock – no lead time Price: attractive cost-saving compared to new equipment — Special advantages: • Immediately available – no months-long lead times as with new machines • Only used for test runs – correspondingly minimal wear • Complete system incl. pre-shredder • Proven Guidetti technology — Description: The Sincro Mill 530 is a compact, fully integrated cable granulation plant for processing mixed copper and aluminium cables – no pre-sorting required. Iijdpfxoy Ahlye Al Nsa The system includes: • Granulator (cutting mill) • Zig-zag separator • Turbine for fine grinding • Dry separation table Material purity up to 99%. In combination with the PMG-H 900 pre-shredder, this produces a powerful recycling line for industrial applications. — Technical data Sincro Mill 530: • Throughput: 450 – 600 kg/h • Motor power: 53 kW • Dimensions (L x W x H): 3410 x 1515 x 4395 mm • Weight: approx. 2,700 kg • For processing copper and aluminium cables — Technical data Pre-Shredder PMG-H 900: • Power: approx. 38.5 kW • Dimensions (L x W x H): 2110 x 2070 x 2245 mm • Weight: approx. 2,840 kg Suitable for pre-shredding cables, non-ferrous metals, and plastics. — Note: The system is available at short notice. Subject to prior sale. Viewing possible by arrangement.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.200 kg, največja dovoljena obremenitev: 25.600 kg, skupna masa: 36.800 kg, konfiguracija osi: 2 osi, prva registracija: 09/2007, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 500 mm, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: svetlo siva, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2007, Oprema: ABS, Rabljen polpriklopnik culla Bertoja, letnik 2007, 2 osi s hidravličnim krmiljenjem, podaljšljiva culla z osrednjim vzdolžnim nosilcem za dodatnih 4,0 m, zaprta culla dolžine 6,20 m, višina od tal 50 cm, nastavljiv in snemljiv vrat, stranski razširitveni elementi na platformi, idealni za kombajne, pnevmatsko vzmetenje, ABS, ventila za regulacijo višine, tehnični pregled do 31.10.2026 – PRODAJALEC INTERDRIVE SRL – PARMA. Ijdpfxjy A Ih Is Al Neia

Stanje: dober (rabljeno), Leto izdelave: 2019, dimenzije: (29+23) x 3,6 x 4,3 metra. Z 11 ogrevalnimi conami in 9 ogrevalnimi conami, nazivna temperatura 650°C in 250°C. Plinska ogrevalna moč 3780 in 1330 kW. Nazivna moč 240 in 190 kW. Iisdpeyzy Epofx Al Noa

Stanje: rabljeno, Valjčni transporter za tračno žago s 4 izvlečnimi prečniki s podpornimi valji Dolžina: 5,7 metra Skupna širina: 4 metre Skupna širina izvlečnikov: 3,35 metra Širina valjev: 160 cm Širina valjčnega transporterja: 185 cm Iiedpfxjyxz U Hj Al Nja Že demontiran Lokacija: Avstrija, v bližini Gradca (Notranja številka: 10br11)