Ima Verižne Plošče nakup rabljenega (9.892)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam Nedjfi Tg Hopfx Alisld No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: rabljeno, Leto izdelave: 2004, Rabljen visokohitrostni mešalnik/granulator iz nerjavečega jekla IMA model VORTEX 075. - Proizvajalec: IMA - Model: Vortex 075 - Prostornina posode: skupna prostornina 85 litrov, delovna prostornina min/maks 8/40 kg - Pokrov posode in izpustni ventil s pnevmatskim upravljanjem - Vključuje: lokalno upravljalno ploščo in električno omarico Njdpfx Aswm Atmelisld Mešalni sistem: - Mešalnik z lopaticami, pogon 3,0 kW motor, maksimalna hitrost 118 obr/min - Rezalnik, pogon 1,5 kW motor, hitrost 3000 obr/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Two complete blister packaging lines from the pharmaceutical industry are available. 1.1) Automatic case packer IMA CP 28 BA, year of manufacture: 2000, min. carton dimensions L/W/H: 220mm/120mm/120mm, max. carton dimensions L/W/H: 600mm/400mm/350mm, output: 8 cartons/min, machine dimensions L/W/H: approx. 4900mm/1900mm/2650mm, weight: approx. 1500kg. 1.2) Bundle wrapping machine IMA BFB MS 300 A with stretch banding, year of manufacture: 2005, bundle length range: 20mm-360mm, bundle width range: 55mm-220mm, bundle height range: 55mm-220mm, output: approx. 40 bundles/min, max. film roll diameter: 300mm, machine dimensions L/W/H: approx. 2900mm/1300mm/1950mm, weight: approx. 1500kg. 1.3) Mini robot. Total system dimensions L/W/H: 10750mm/2350mm/2250mm, transport weight 1/2: approx. 4700kg/5000kg, total weight: approx. 10000kg. Shrink tunnel not included. 2.1) Blister packaging line IMA Giant 1 BH 100 A, year of manufacture: 2006, products: tablets/capsules, design: modular, max. packaging output: approx. 350 blisters/min, max. blister dimensions L/W/H: 90mm/145mm/12mm, max. carton dimensions L/W/H: 100mm/155mm/105mm. System dimensions L/W/H: approx. 7100mm/1300mm/2250mm. Documentation available. On-site inspection possible. Preferably to be sold as a package. Expected to be available from October 2026. Nljdpfxsy I Acqj Aliod

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Nodpsyttrxefx Alisld Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, številka stroja/vozila: 20787, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, IMA BIMA 410 V 140/600 – professional CNC machining centre for wood. Gantry-type construction, designed for the production of furniture, staircases, and special components. Large Z-axis stroke (600 mm) enables machining of tall workpieces. Equipped with a 7.5–11 kW spindle, automatic tool changer, vertical and horizontal drilling heads, and a vacuum table with consoles. IMA WOP control system. Manufacturer: IMA (Germany) Model: BIMA 410 V 140/600 Type: CNC machining centre for wood (point-to-point) 🧩 Working area • X-axis: up to approx. 6000 mm • Y-axis: approx. 1400 mm • Z-axis: version 140 / 600 mm (high Z clearance) • Number of axes: 3–5 (depending on configuration and head) ⚙️ Main spindle • Power: 7.5 – 11 kW • Speed: 1,500 – 24,000 rpm • Tool holder: HSK F63 • Max. tool diameter: approx. 100–150 mm • Max. tool length: approx. 150 mm • Max. tool weight: approx. 6 kg 🔧 Tool changer • Automatic tool changer • Number of slots: 18 🪚 Working units (typical) • Vertical drilling heads: up to 21 spindles • Horizontal (cross) drilling heads Njdpfoyky Hdsx Alisld • Special aggregates (optional): • lock case routing • grooving saw • Blum / Lamello hardware aggregates • angle aggregates 🧲 Worktable • Vacuum pod & rail table (console system) • Approx. 8 workpiece consoles • Vacuum pumps: 2 pcs. (approx. 100–140 m³/h) ⚡ Drives and feeds • Rapid traverse: • X: up to approx. 100 m/min • Y: up to approx. 80 m/min • Z: up to approx. 25 m/min 💻 Control • CNC: IMA WOP / IMAWOP (optionally Siemens / Beckhoff) ⚙️ Installed power • Total connected load: approx. 23 kW 📏 Machine weight • approx. 6500 – 8500 kg (depending on configuration)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, številka stroja/vozila: 24406, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 900 h, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – Technical Specifications (Main) 🔹 Working Area (Axis Travels) • X-axis: approx. 3300 mm • Y-axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle • Spindle power: approx. 18 kW • Applications: milling, drilling, nesting of panels 🔹 Tool Magazine • Automatic tool changer (ATC): up to 18 positions 🔹 Material Clamping System • Vacuum table with beams and suction cups 🔹 Saw Aggregate • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm — 🛠️ Functions and Equipment (Typical) • 5-sided drilling (top + X+/X−/Y+/Y− sides) Nsdpfxeykn Dwj Alield • Saw unit for cutting and grooving • Optional horizontal milling unit (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel optimization with simultaneous machining) • Automatic lubrication • Waste and chip conveyance (belt conveyor) — 📌 General Information • Manufacturer: IMA Schelling (Germany) • Year of manufacture found in listings: approx. 2010–2016 (often 2014) • Applications: Furniture, MDF boards, HPL, solid wood, nesting

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: A) W06027 1st double-sided sizing and edge banding machine "IMA" Combima II /440 /A /R3 Nledpfx Alsun N Dloijd B) Rotation unit (90°) C) W06028 2nd double-sided sizing and edge banding machine "IMA" Combima II /190 /B /R3

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (optionally 3000) Cam pitch (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transfer bar (Master & Slave systems) FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Jointing cutter unit 08.376 (4.5 kW x 2) Free space EDGE GLUING PROCESSING (for each side): Gluing unit (hot melt adhesive) 283.205 Edge pressure section. Edge magazine for rolls (No. 2 positions) End trimming unit 08.42 (0.2 kW x 2) 0°-25° (max. working speed 50 m/min, servo motor) Nodpfx Aju Ekbnslijld Milling unit 08.055 (0.66 kW x 2) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (0.66 kW x 2) Spray unit (for polishing fluid) Free space (for optional scraper addition) Buffing unit 08.617 (0.18 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in strips / banding (min/max) mm: max. 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 Safety and soundproof enclosures FORMATTING UNIT (for each side): Pre-milling cutter 75.186 (1 x 4.4 kW) Planing unit (2 x 6.6 kW) + spare position EDGE BANDING SECTION (for each side): Infrared heating for workpiece edge pre-warming Gluing unit (hot melt adhesive) 04.1570 Pressure zone + edge magazine for rolls (compartment no.) 2 End trim saw 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling unit 08.0555 (1 x 0.66 kW) Multifunction unit (radius milling and profile trimming) MFA 08.342 (2 x 0.66 kW) SERVO Max 20 m/min Profile scraping unit 08.519 Flat scraping unit 08.50 Spraying unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving/rebating and profiling: 75.30 (2 x 4.4 kW) Nedswz Ic Aopfx Alijld

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Safety and sound insulation cabins Nljdjunrwnopfx Aliod FORMATTING (per side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING (per side): Gluing unit (hot melt adhesive + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (number of slots): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°–30° Milling unit 08.055 (2 x 0.66 kW) 0°–30° Profile scraper unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving, rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°–180°

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), I am selling a stacking / destacking unit MEINERT (IMA Group) P620 E/S - 2500 / 1300 system, year of manufacture 2011. Stacking unit with single-side guidance; also suitable for pallets. Vacuum system (with pump) Rotating head Automatic loading Infeed table with motorized roller system Outfeed table at floor level with lifting mechanism (motorized roller system) Front outfeed table with roller system Outfeed roller conveyor station for stacked material Complete safety fencing included! Nedpfx Aloh Hp Dtsiold Operating capacity: approx. 16 cycles per minute Panel height: 10 – 50 mm Min. panel dimensions: 250 x 320 mm Max. panel dimensions: 1300 x 3000 mm Overall footprint: L. 10,200 mm x W. 8,700 mm Total connected load: 45 kW Year of manufacture: 2011 Available immediately. Ready for operation and possible to inspect. Comes with CE certificate and full documentation.

Leto izdelave: 2007, obratovalne ure: 138 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 900K707385, Tablet Press PRESSIMA – as new, in delivery condition Fully functional machine with complete documentation and software. Includes a multi-tip tool set EU-D (5 × 4mm) (original price €12,000, 6 months old) as well as a single-tip tool set (5mm) EU-B. Both punch sets supplied by Ritter. The machine features an interchangeable turret. B or D tooling can be used, each in EU or TSM standard. Operation • Suitable for small batch production • Main compression force measurement with digital display on the machine panel • Digital readout of parameters set via handwheels • Note: no automatic control available Technical Data • Speed: 10–75 rpm • Main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Feed shoe: two-wheel, speed adjustable • Drive motor: frequency-controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total power consumption: 1.5 kW • Machine housing and pressing area: stainless steel • Pressing area paint-free, easy access, surfaces hard nickel-plated • Central dust extraction via connection port • Central lubrication of punches via manual lubrication pump • Automatic lubrication pump for punches and guideways • Shoe motor integrated in head section Mechanics • Handwheels for tablet thickness, main compression, pre-compression, and fill quantity • Rotary flap between fill tube and feed shoe • Robust pre- and main compression stations • Scrapers on upper and lower punches • Retaining magnets on lower punches • 12 mm feed cam standard • Lower punch is lowered after dosing • Lower guideway and ejection cam easily removable • Machine status display on control panel Measurement and Analysis System • MS2300 for recording and analysis of up to 16 channels • Measurement/evaluation of: o Main compression top o Main compression bottom o Pre-compression top o Ejection force o Scraping force o Punch travel (upper and lower) • Signal amplifiers for main compression, pre-compression, ejection, and scraping force available Equipment / Positions • Upper and lower punch shaft bores with feather keyways 4.8 mm for guided tooling • Compartment feed shoe • Hard-chromed turret plate • Main compression force measurement incl. display at the operator terminal • Accessory kit type 8 MX: o 4 blank dies EU-B o 4 blank dies EU-D o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional Nljdpfxsy Hl Aqs Alijd • Control retrofit with Siemens S7-1200 and Siemens TP panel possible.

Stanje: rabljeno, Imatronic Numerical Control with ImaWop 8.0 software (software updated in 2020). Working area on the X-axis: 7000 mm. Working area on the Y-axis: 1400 mm. Full table with support plate for positioning suction cups. Suction cups can be manually positioned on the work surface using a laser indicator. No. 2 vertical electrospindles with C-axis and automatic tool changer. Automatic tool changer with 18 positions located at the rear of the machine. Drilling head with 21 spindles arranged as follows: * 11 vertical on the X-axis * 10 vertical on the Y-axis. Edge banding unit with glue pot and pre-melter for EVA glue (new glue pot as of 2023). Nordson pre-melter for PUR bonding on folding panels. No. 1 trimming unit (end trimmer). No. 1 milling unit. No. 1 cross-unit with 4 horizontal drilling lines. No. 1 blowing unit. Edge storage unit with 2 positions. Front carpet protection and safety system. Full safety enclosure (not original IMA). TECHNICAL DETAILS TO BE VERIFIED. Nodpfsw El Nhjx Alisld

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, hitrost pomika os X: 20 m/min, Oprema: CE označba, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 20 m/min Panel height min.: 8 mm Panel height max.: 60 mm Panel length min.: 150 mm Panel width min.: 65 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Format trimming unit Correction unit Edge preheating lamps Nedpjxxaucsfx Alisld Gluing system Glue pot for polyurethane adhesive (PUR) Prefuser for PUR adhesive Edge pressure roller conveyor No. of pressure rollers: 6 End trimming unit Model: 08.415 Number of motors: 2 Motor power: 0.66 kW Max. speed: 12,000 rpm Top milling unit Model: 08.0555 Number of motors: 2 Motor power: 1 kW Multifunctional unit Model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.18 + 0.400 kW Rotational speed: 12,000 rpm Edge scraper unit Model: 08.519 Glue scraper unit Model: 08.521 Buffing unit Model: 08.617-2 Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Number of working units: 8 Gluing system: PUR Control system: WINDOWS EQUIPMENT Software for machine programming: ICOS open TS CE certification

Leto izdelave: 1955, stanje: rabljeno, used Manufacturer: IMA Model: B55 Year of manufacture: 1955 Machine No.: 0/650 Press cylinders: pneumatic, 4 units Nledpfx Asvwf Szelijd Table size: 2900 x 1300 mm Working height: 750 mm Max. material thickness: approx. 200 mm Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition Without warranty or guarantee

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, 30 paquetes/min – Siemens Simatic OP7 Envolvedora retráctil y máquina de enfajado adecuada para cosméticos y productos pequeños envasados. La máquina forma conjuntos y los envuelve con film plástico, seguido de un túnel de retracción para un embalaje ajustado. Equipada con portabobinas de film superior e inferior y sistema manual de empalme de film. El túnel de retractilado cuenta con una sección de enfriamiento en la salida y control de velocidad ajustable. La máquina es apta para diferentes formatos de producto y agrupaciones, y se suministra con documentación. Velocidad máxima: 30 paquetes/min Ancho del transportador de cadena charnela: 80 mm Ancho del transportador del túnel retráctil: 480 mm Panel de control: Siemens Simatic OP7 Sistema de film: Bobinas superior e inferior con empalme manual Túnel retráctil: con sección de enfriamiento en la salida Regulación de velocidad: ajustable Dimensiones del producto (mín / máx) Longitud: 50 – 100 mm Altura: 100 – 300 mm Ancho: 25 – 60 mm Nljdpfx Aloyt Hiqsiod Dimensiones de agrupación (mín / máx) Longitud: 75 – 330 mm Altura: 100 – 300 mm Ancho: 50 – 100 mm Información adicional Sistema de sobrealimentación incluido Portabobinas superior e inferior Documentación disponible

Leto izdelave: 1998, stanje: dober (rabljeno), Schraubverschließer für Kunststoffdeckel, Durchmesser 50 mm x 20 mm Höhe 380 V, 7,5 kW Maschine mit Deckelzuführung/-sortierung und Fehlverschluss-Erkennung. Leistung bis zu 50 Stück/Minute Nledpjh Np Uqofx Aliod wie besichtigt (as-is) oder angepasst an Kundenvorgaben

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: omejena funkcionalnost, IMA postforming machine, year 1999 The hotmelt adhesive units for surface and corner bonding are not included. The machine offered is being sold as a used unit. Sale is made excluding any liability for material defects. The machine is sold as inspected, with all warranties excluded. The seller assumes no guarantee for the functionality, performance, or suitability for any specific purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body, or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the machine is to be carried out by the buyer at their own responsibility and cost. The buyer bears all costs and risks associated with dismantling, loading, and transport. Nodpfx Aleywfifsijld Transfer of Risk Risk passes to the buyer at the latest with the start of dismantling or loading. Miscellaneous No liability is assumed for hidden defects. All information regarding the machine (e.g. year of construction, operating hours, technical data) is provided to the best of our knowledge, but without guarantee.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Carton width range: 28mm-92mm, carton height range: 14mm-60mm, carton length range: 55mm-190mm, max. total cross-section (width + height): 140mm, packaging output: 120 cartons/min, machine dimensions X/Y/Z: approx. 2550mm/1250mm/1800mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Nsdpsv Suhbsfx Alield

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Single-sided edge banding machine in full configuration, including a total of 3 interchangeable gluing units, 1 of which is for PUR adhesive. Material dimensions: Roll materials: - Paper and plastic edging 0.3 - 3.0 mm - Veneer edging: 0.5 - 3.0 mm - Strips 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine equipment: Infeed fence, adjustment automatic via program Separation agent application unit Jointing milling unit with 2 motors, each 4 kW Air nozzle for removing loose particles Gluing unit with glue container 1.8 L, with QUICK-LOCK system with single roll / strip magazine 1 main pressure roller and 3 follow-up pressure rollers Pressure zone adjustment automatic via program End trimming unit with 2 motors 660 W, swiveling 0 to 8 degrees Profile trimming unit with 2 motors 180 W and 2 motors 400 W max. workpiece thickness 60 mm max. feed speed 20 m/min. Automatic adjustment via program Profile scraper unit Nlsdeybbayspfx Alijd Glue joint scraper unit Cleaning agent application unit Buffing unit with 2 motors 180 W Control: ICOS open TS, PC-based

Stanje: dober (rabljeno), Leto izdelave: 2014, Naprodaj je IMA sistem za dovod materiala. Nlodpfx Aoqwn E Helisd Stroj je na voljo takoj. Letnik: 2014.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, CNC OBDELOVALNI IN ROBILNI CENTER, IMA BIMA 410 V SPLOŠNE ZNAČILNOSTI: Uporabne delovne mere: 4000mm x 1200mm x 100mm Maks. hitrost osi X: 100 m/min Maks. hitrost osi Y: 100 m/min Maks. hitrost osi Z: 25 m/min 2 delovni coni 8 premičnih prečk SCHMALZ 23 vakuumskih priseskov SCHMALZ 4 vpenjalne ročice za plošče Vakuumska črpalka SIEMENS OBDELOVALNA ENOTA: Nameščena na levi strani premičnega portala 10 KM, 0–20.000 vrt/min s frekvenčnim pretvornikom Os C 360° Tekočinsko hlajenje Avtomatska menjava orodja, vpenjalni sistem HSK F63 Rotacijski magazin za orodje večjih dimenzij, 12 pozicij VRTALNA ENOTA v X: Nameščena na levi strani premičnega portala 7 neodvisnih navpičnih vrtalnih vreten Pogon s hitro zobatim jermenom, 9000 vrt/min Samostojni motor VRTALNA ENOTA v Y: Nameščena na levi strani premičnega portala 5 neodvisnih navpičnih vrtalnih vreten Pogon s hitro zobatim jermenom, 9000 vrt/min Samostojni motor ROBNA/OBLEPILNA ENOTA: Nameščena na desni strani premičnega portala Dvojni magazin za robni trak Avtomatska menjava robnega traku Skupina za nanos lepila hot-melt Žaga za odrez robnega traku na mero Agregat za obrezovanje zgoraj/spodaj Dvojni agregat za strganje robu + lepila PROGRAMER NUM KRMILNIK IMATRONIC Njdpfx Aozc E A Isliold PROGRAMSKA OPREMA IMAWOP Varnostne zaščite, varnostne preproge, vrata z zakasnjeno odprtino, itd. Skladno s CE varnostnimi standardi POPOLNOMA PREGLEDANA, PRIPRAVLJENA NA UPORABO

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Edge banding machine Manufacturer: IMA Model: Quadromat 3512 U Year of manufacture: 1999 Nledpfxsv T R Erj Alied Edge material: veneer rolls and strips, plastic, solid wood lippings Edge height: 14–50 mm Edge thickness: 0.4–12 mm Speed: 18,000 rpm End trimming unit Milling units Profile scraping knives Buffing unit Flat scraping knives

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Filling and Packaging Line for 50 ml Vials 1. Vial Loading Machine: Rotary Table, SSS Conveyor Technology, Year of Manufacture 2007 Empty or already filled and sealed 50 ml vials are manually placed onto a rotary table. From there, they are singulated onto the conveyor belt and fed into the next stages of the line. 2. Labelling with Print and Camera Inspection Machine: Pago System 520, Year of Manufacture 2007 Printing System: Domino 320i Thermal Transfer Printer Camera System: Cognex (integrated into Pago) The vials are labelled with self-adhesive labels. During labelling, batch numbers, expiry dates, etc. are printed directly onto the label via thermal transfer (Domino). At the same time, a camera-based inspection (Cognex) is performed on the printed data. The inspection results are displayed on an integrated screen. Both the printing and camera systems are fully integrated into the Pago labelling machine. 3. Changing Vial Orientation (Vertical to Horizontal) Machine: FlexLink Conveyor XH, SSS Conveyor Technology, Year of Manufacture 2016 The labelled vials are moved to a horizontal position via a vial orienter to prepare them for insertion into the cartoner. 4. Cartoning with Leaflet Insertion Machine: MK-120, Harro Höfliger, Year of Manufacture 2007 Preformed folding cartons are automatically erected in the cartoner. Simultaneously, a leaflet is folded and provided by a GUK folding machine. One 50 ml vial and one leaflet are automatically inserted into each folding carton. In the configuration shown here, the base of the carton is sealed with hot glue and the top is closed with a tuck-in flap. Optionally, with existing format parts, the machine can be converted to double tuck-in flaps without glue sealing. 5. Serialization and Camera Inspection Machine: Laetus PrintSpect TTS MV-70, Year of Manufacture 2015 After the cartoner, the folding cartons are printed (thermal transfer) with serial numbers and variable data and then fully inspected by a Laetus camera system. This station was retrofitted in 2015. The Harro Höfliger MK-120 also has an integrated Wölke printing system, which is not used here. Nodpfjxb Uptex Alield 6. Tamper-Evident Labelling Machine: Pago System, Year of Manufacture 2007 The serialized folding cartons are sealed on the tuck-in flap sides with tamper-evident labels. To do this, the cartons are precisely aligned and guided via side belts. 7. Case Packing Machine: IMA CP18BA Case Packer, Year of Manufacture 2007 The finished individual cartons are pneumatically pushed into shipping cases. The case packer seals the shipping cases with hot glue. 8. Final Labelling of Shipping Cases Machine: Laetus VL4 C2 ICMV Cabinet + Pago Labeller, Year of Manufacture 2015 The finished shipping cases are labelled via thermal transfer printing. No camera-based inspection is performed at this station. This unit is used exclusively for labelling shipping cases (no serialization or aggregation). 9. Inspection (optional) A manual checkweigher is also available but is not included in the sale and was only used for internal final inspections. Line available from Jan. 2026. Further information to follow.

Stanje: rabljeno, Milling and chamfering units Manufacturer: IMA - For double-sided edge banding machine Njdjbxp Nuopfx Aliold (1 unit for the left side / 1 unit for the right side)