Homag Storeteq S-200 nakup rabljenega (90.054)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 0-200-24-6287, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 56 A, največja debelina roba: 20 mm, Oprema: CE označba, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and post-processing of various edging materials. Fixed fence on the left side. NOTE: Very well-maintained machine with low operating hours. SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain for workpiece feed, - Maximum workpiece thickness: 60 mm - Motorized height-adjustable pressure beam - Workpiece support with rollers, extendable up to approx. 700 mm - Glue pot lift-off when feed stops - Glue roller clamping before workpiece rear edge - (Remote) manual control for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit with synchronous/counter-rotation, 2x4kW, operation-controlled GLUING UNIT A20, comprising: - QA34 glue application unit - Pre-melter for EVA adhesive - Edge magazine for edge thickness from min. 0.4 mm to max. 20 mm - Pressure zone with automatic horizontal adjustment (NC) according to edge thickness, 1 powered and 6 non-powered pressure rollers POST-PROCESSING SECTION: - HL81 end trimming unit, 2 motors (front/rear edge) with motorized fine-adjustable trimming stops - Pre-/flush trimming unit 1.5 kW, top/bottom Dcodpfx Apjyv Da Heljg - FK13 corner rounding unit, 2 motors (top/bottom) with automatic 8-position tool changer and multiple exchange heads, iSystem - Profile scraper MN21, top/bottom, with axis positioning - Flat scraper FA10, top/bottom, (version with 3 tracing rollers) - KS10 belt sanding unit, for straight edges, with oscillation - Buffing unit top/bottom CONTROL: HOMATIC NC 21

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003572 - Koda proizvajalca: 2-007-03-3970 - Stanje: Kot novo (razstavni kos) - Funkcionalnost: Popolnoma delujoče - Združljivost z napravami: - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Dodjyrn Ryepfx Aplecg 2KG - 36X26X21

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 X04004F) 1st boring machine “WEEKE” Model BST 500 D X04004G) 2nd boring machine “WEEKE” Model BST 500 D X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 Djdpfx Aolikvhjplscg X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA

Stanje: rabljeno, Leto izdelave: 2005, Enostranski robni lepilni stroj, namenjen natančnemu in stabilnemu lepljenju masivnih in ploščnih materialov (iverne plošče, MDF, laminat). Stroj je oblikovan kot kompaktna, a popolnoma opremljena rešitev za malo- in srednjeserijsko proizvodnjo s poudarkom na kakovosti obdelave robov. Masivni litoželezni okvir zagotavlja visoko togost stroja in dolgoročno geometrijsko stabilnost. Stroj je opremljen s klasičnim neprekinjenim transporterjem s pritisnim trakom in popolnim naborom obdelovalnih agregatov za končno obdelavo roba v enem prehodu. Tehnična sestava stroja: Predrezkalna enota Ogrevanje materiala Samodejni dozirnik EVA lepila Nanašalni valj EVA Odrezovalne žage (sprednja in zadnja) Groba rezkalna enota Zaokroževalna enota Radijska strgala Strgalo za lepilo Rezkalni agregat za utore Dedpfx Aoyfw Sysplscg Krtačna enota Povratni transporter

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device Dcodpfxoyqybuj Apleg MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, model krmilnika: POWER CONTROL PC22, največja hitrost vrtenja: 12.000 obr/min, Auction extended by one week due to updated technical data! TECHNICAL DETAILS Workpiece Dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Gluing Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Adhesive container for EVA hot-melt glue Premelter for EVA hot-melt glue Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Dcodpfeyqx U Hjx Aplsg Speed: 12,000 rpm Edge Processing Unit 2 Top and bottom rough flush trimming: available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for roughing: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Edge scraper Edge Processing Unit 6 Glue scraper Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Model: Unicon-D 2000/400/450/100 Year of manufacture: 2015 Electrical data: - 230 V Dsdpfelatz Dox Apljcg - 0.7 A - 50 Hertz - IP65 Dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical specifications: - 230 V - 0.7 A - 50 Hertz - IP65 Dodsk Eakvjpfx Aplecg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Stroj za lepljenje robov, izdelan leta 2009. Ta HOMAG PROFI KAR310/11/A20/S2 je opremljen s povratnim sistemom za obdelovance BARBARIC. Razmislite o priložnosti za nakup tega stroja za lepljenje robov HOMAG PROFI KAR310/11/A20/S2. Za več podrobnosti nas kontaktirajte. Dodpfx Apsyhqi Djlocg • Stanje: rabljeno Dodatna oprema • BARBARIC povratni sistem za obdelovance

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Ta HOMAG KAL 330/6/A3/S2 je bila izdelana leta 2009. Rabljeni robni lepilni stroj z lepilnim agregatom za EVA talilno lepilo, tlačno cono, rezalnim agregatom, kopirno rezkalno glavo, strgalo in polirnim agregatom. Vključuje sistem za vračanje obdelovancev LIGMATECH. Izkoristite priložnost za nakup tega robnega lepilnega stroja HOMAG KAL 330/6/A3/S2. Za več informacij nas kontaktirajte. Dodpfxjychduo Aplscg

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Box On Demand, continuous corrugated cardboard, focus on your CO2 footprint. The machine listed here for processing continuous corrugated cardboard belongs to the series of static operating machines, i.e., all crosswise operations are performed while the cardboard is stationary. The machine is designed for high productivity. The maximum working width for cardboard is 1,500 mm. All tool adjustments are performed automatically. 1) Main machine body (Automatic Carton Cutter): Dedpsyy Iqkjfx Aplscg - Linear cross-cutting and cross-creasing unit for head and foot processing on the cardboard - 8 longitudinal creasing and slitting units from above for longitudinal creasing and cutting of the cardboard 2) Dual carton magazines: - 2 carton magazines enable the provision and feed of raw cardboard to the processing machine - Stack height for continuous corrugated cardboard up to max. 2,000 mm possible 3) Control cabinet, controls, electronics: - Contains all components required to operate and control the system - Control cabinet components are based on HOMAG standards.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80796, Stroj je v odličnem stanju, popolnoma delujoč, potrebno ga je razstaviti na lokaciji v Vilni, Litva. Prodajalec nudi razstavljanje, nakladanje na tovornjak ter dostavo. Dedpfx Apsvddpljlecg

Stanje: rabljeno, Leto izdelave: 2003, številka stroja/vozila: KL 77/A20/S2, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 20 m/min, skupna dolžina: 9.000 mm, Oprema: dokumentacija / priročnik, Wij bieden deze gebruikte HOMAG Optimat kL 77/A20/S2 EVENT kantenlijmer, bouwjaar 2003, aan. Fabrikant: HOMAG Model: Optimat kL 77/A20/S2 EVENT Bouwjaar: 2003 Toestand: gebruikt Type machine: kantenlijmer De machine wordt verkocht vanwege de aanschaf van een nieuwe. Ze is momenteel nog in bedrijf en volledig functioneel. Een zeer solide machine met retoursysteem inbegrepen. Altijd stabiel en levert een perfecte afwerking! Uitrusting: - Nozzles / lijmsproeiers Dcjdjyw N Apopfx Apleg - Formaatfrezen, diameter 100 mm - Blaasunit - Voorverwarmingsunit - PUR-lijmsysteem met patroonte verwarming - 7 drukrollen - Afkortzagen, recht en in verstek - Boven- en ondervoegfrezen - Profielkopfrezen R1/R2 mm - Profiel-/vlakscharen - Nozzles / lijmsproeiers - Polijstborstels - Machine is voorzien van boven- en onderbandtransport (zeer stabiel) - Voorzijde in hoogte verstelbaar (automatisch) - Profielkopfrezen automatisch verstelbaar via het programma - Afkortzagen automatisch ingesteld - Alle functies zijn bedienbaar via het frontpaneel - Retoursysteem bestuurd via de pc -> Demo mogelijk bij interesse! Prijs op aanvraag via privébericht. Neem gerust contact op bij vragen of voor meer informatie. If you have any questions or require further information, please feel free to send us a message or call us.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 110 kW (149,56 KM), vrsta goriva: električni, barva: drugo, skupna masa: 21.360 kg, Leto izdelave: 2026, Čeljustni drobilniki običajno drobijo 200 do 300 ton na uro, odvisno od njihove zmogljivosti. Drobilnike z večjo zmogljivostjo je mogoče izdelati po naročilu glede na potrebe strank. Čeljustni drobilniki se na splošno uporabljajo za drobljenje najtrših kamnin, kot so bazalt, granit in gabro. Zaradi svoje močne in vzdržljive čeljustne konstrukcije so že vrsto let ena izmed najbolj priljubljenih izbir v rudarski industriji. Z nastavitvijo odprtine čeljusti je mogoče zelo natančno dobiti želen frakcijski izdelek in zmogljivost. Nastavljanje je enostavno izvedljivo s pomočjo hidravličnih cilindrov. SPLOŠNE ZNAČILNOSTI IN LASTNOSTI: - Pogon preko jermenice in škripca - Čeljustne plošče iz posebej ulitega manganovega jekla z visoko odpornostjo proti obrabi - Ekscentrična gred iz kovanega jekla, legiranega s Cr, Ni in Mo - Nastavljiva odprtina čeljusti s hidravličnim reguliranjem - Varnostne vzvodne plošče (toggle plate) za zaščito ob preobremenitvi - Površine, izpostavljene obrabi, so zaščitene z oblogami TEHNIČNE SPECIFIKACIJE: • Model: FABO CLK 1175 Dcjdpfx Apey Dpl Rjleg • Tip: Primarni čeljustni drobilnik • Vhodne dimenzije: 1070 x 760 mm • Nastavljiva odprtina čeljusti: 45–160 mm • Največja vhodna velikost: 760 mm • Zmogljivost: 200–300 ton/uro • Motor: težkoindustrijski GAMAK, 110 kW • Ležaji: težkoindustrijski SKF-FAG • Teža: 21.360 kg • Dimenzije: 2730 x 1698 x 2492 mm • Vključno z motorjem in varnostnimi zaščitami. * Vsi naši izdelki so izdelani skrbno in so pokriti z 1-letno garancijo! * Montaža in šolanje operaterjev BREZPLAČNO ZA VEČ INFORMACIJ NAS PROSIMO KONTAKTIRAJTE!

Stanje: skoraj kot novo (rabljeno), 200 linear metres of shelving system Schäfer R3000 Manufacturer: Schäfer As new condition, see photos! Height: 2.3 m Depth: 50 cm Load capacity per shelf: 100 kg Dcodpedz Agdefx Aplog Bay width: 100 cm Asking price: €22,450 net ex works Offer includes: 201 uprights or frames, height 2.3 m, galvanised 800 shelf panels, depth 50 cm, 100 kg load capacity per shelf, galvanised 67 cross bracing sets for stabilisation 4 levels per bay (additional levels available at extra cost) Other configurations available: Heights of 2.3 m, 2.5 m, or 3 m in stock. Transport and installation available on request. Further information on request. Inspection possible anytime by appointment. Over 5,000 linear metres of pallet racking from various manufacturers always in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! Please refer to our terms and conditions. All prices excl. VAT, ex works.) Purchase / Sales We are constantly looking for, or offering, numerous items from various sectors broom-clean company clearances business liquidations Fast - flexible - reliable! We also clear out or dispose for insolvency administrators. Contact us with a few keywords, we will respond immediately. To visit our homepage, please click on our logo!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EDGE CELOVITA LINIJA VKLJUČUJE: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE POLNILNIK V200, leto izdelave 2010 15.120 delovnih ur Kapaciteta 9.000 kartonov na uro 2. TETRA PAK ACHX 10-0400-44 HELIX AKUMULATOR KARTONOV V400, leto izdelave 2010, 17.431 delovnih ur 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM NADGRAJEN V300, leto izdelave 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, leto izdelave 2010, 10.914 delovnih ur 5. TETRA PAK FILM WRAPPER 32 V400, leto izdelave 2010, nikoli uporabljen, samo 45 ur! 6. TETRA PAK CARDBOARD PACKER CBP 32 Dsdpjya Nf Iefx Aplscg V400, leto izdelave 2010, wrap around 7. TETRA PAK LINE CONTROLLER LC30+ 8. TRANSPORTNI SISTEM 9. VKLJUČEN TISKALNIK VIDEOJET 1620 LINIJA JE V STANJU KOT NOVA. LOKACIJA – ŠVEDSKA. TAKOJ PRIPRAVLJENA ZA DEMONTAŽO IN POŠILJKO. CENA PO POVPRAŠEVANJU.

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 0-200-03-8334, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 24 m/min, model krmilnika: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Dcodpfeydiymjx Aplog Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fuse: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Working height electronically adjustable via CNC Motorized rubberized pressure belt Panel support guide Side roller conveyor with free-running rollers for panel support Sanding unit Lamps for preheating panel edge 6-position coil holder magazine with automatic edge change via CNC Gluing unit for EVA hot-melt adhesive with premelter and glue pot Pressure station for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 motors and automatic tilt adjustment Overlapping trimming/milling unit with 2 motors Adhesive/milling unit with 2 tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (scraper + rounding) with numerical control, automatic adjustment Space reserved for possible installation of an additional working unit Edge scraping unit Oscillating brush unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Viessmann Vitocrossal 200 Type: CM2 Year of manufacture: 2016 Output: 311 kW We speak Russian! Viewing only by prior telephone arrangement! Preferred sale to dealers, commercial traders or for export. All information provided without guarantee; subject to errors and prior sale. Dsdpfjtu Trujx Aplscg The seller accepts no liability for typing or data transmission errors. Of course, we also handle all formalities. Loading possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Viessmann Vitoplex 700 kW Year: 2014 Model: SX2A Output: 700 kW Inspection by prior telephone arrangement only! Preferred sale to dealers, commercial operators, or for export. All information is provided without guarantee; subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typographical or data transmission errors. Naturally, we will also handle all formalities. Loading possible Dcjdpfstu T I Usx Aplsg Request more information

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Viessmann Vitorond 200 Moč: 160 kW Gorilnik: po želji je na voljo olje ali plinski Weishaupt gorilnik Ogled le po predhodnem telefonskem dogovoru! Djdpfx Aemnqc Hoplscg Prednost imajo prodaja trgovcem, podjetnikom ali za izvoz. Vse informacije so brez garancije, pridržujemo si pravico do napak in predhodne prodaje. Prodajalec ne prevzema odgovornosti za napake pri vnosu ali prenosu podatkov. Seveda uredimo tudi vse formalnosti. Nakladanje je možno.

Stanje: rabljeno, Manufacturer: Leomotor A/S Type: KC 218B159 - LM 2000 - 12630 Dcodpedc A Rnjfx Aplsg

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Mera reza 3.200 x 3.200 mm Maksimalna višina reza 50 mm Glavni motor žage 5,5 kW Premer glavnega žaginega lista 300 mm Predrezalni motor 1,1 kW Dedpfx Apjyba Shelocg Premer predrezalnega lista 150 mm Podajanje vozička žage nastavljivo 6 - 32 m/min Podajanje programskega drsnika 18 m/min Število vpenjalnih klešč: 6 kos Število zračnih miz: 3 kos Ročna naprava za vračanje pod kotom za reze širine 100 - 1.250 mm PC krmiljenje na osnovi Windows 2000

Stanje: novo, Working width: 3,500 mm Working height: 2,300 mm Number of pressure cylinders: 4 pcs. S&S Frame Press Type RP 2000 – CE version Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment includes central pressure beam, angled window device, counter profiles for single-part production, and much more! Request our complete price list! Description: Robust frame welded construction made of thick-walled special profiles, sliding carriages, and pressure beams with 50 mm hole pitch. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical pressure cylinders on special pressure beams with single-hand quick adjustment and weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure sustained absorption of high pressing forces. Quick and smooth width adjustment via ball-bearing guide carriage with central locking, fixing in 50 mm increments. Upper horizontal pressure cylinder infinitely height-adjustable and equipped with weight compensation. Dodpfxjd Ih H Sj Aplscg Lower horizontal pressure cylinder with centering bores for both abutment levels, no weight compensation. Abutment and pressure plate depth 100 mm. Pressure plate and support width 130 mm. Machine controlled electro-hydraulically, with 2 vertical pressure cylinders, Ø 50 mm, stroke 120 mm, single-acting, with weight compensation and single-hand quick adjustment; 2 horizontal pressure cylinders, Ø 40 mm, stroke 120 mm, double-acting with weight compensation; 2 manual control valves, manometer, 1 pressure control valve from 20 to 100 bar corresponding to 400 to 2,000 kg pressing force vertically; powered by 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey. (Technical data according to manufacturer without guarantee, images may show optional equipment!)

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The blasting unit is also equipped with a permanently mounted water separator, which removes moisture from the compressed air and prevents the blasting medium from clumping due to excessive moisture. For safe operation of the sandblasting equipment, our safety shutoff is included. This starts and stops the blasting process by actuating the hand lever, which is mounted on the blasting hose. The scope of delivery includes: Dodpfx Apewc Rk Eelecg - SAPI pressure blasting unit "Mammut 200 L" - 1 1/4" pressure regulator, permanently installed - 1 1/4" water separator, permanently installed - SAPI safety shutoff Technical data pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Fixed piping 1 1/4" inside and outside - Rubber-coated metal cone with rubber seal - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Total height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shutoff - Fastest switching times while complying with trade association regulations (VBG 48) - Pressure settings can be precisely adjusted before blasting – continuously adjustable from 0.1 – 12.0 bar - Reduced blasting media consumption, as the pressure vessel remains constantly pressurized with no unnecessary run-on - Upon restarting, full blasting pressure is instantly available at the nozzle – no pressure build-up required → lower consumption & less hose wear - No condensate forms in the vessel, as it remains pressurized at all times → no venting or aeration at each start/stop - Optimal media dosing with hardened fine-dosing valve - Lower compressed air requirement → noticeably reduced diesel consumption - Single-person operation possible, as the pressure can be read and adjusted directly at the manometer – even without starting - No failure-prone components such as control valves, membranes, or seals → maintenance-friendly and reliable in operation - Only the blasting hose in the safety shutoff needs to be checked and replaced if necessary

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Max. workpiece length: 3600 mm, max. workpiece width: 1400 mm, overall length: 8750 mm, overall width: 5250 mm. Dsdpfxoqvnl Te Aplocg