Hesse By Durma Ad-S 2060 nakup rabljenega (91.186)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Ta stroj je idealen za natančno rezanje polnih materialov, cevi in profilov iz jekla, nerjavečega jekla in neželeznih kovin. Zahvaljujoč numeričnemu krmiljenju (NC) je mogoče ponavljajoče se naloge rezanja izvajati učinkovito in reproducibilno. Robustna industrijska izvedba omogoča, da je žaga idealna rešitev za kovinarske delavnice, jeklarne in splošno strojno industrijo. Tehnični podatki Psdpfx Amozwd E Nofjgr Proizvajalec: BEKA-MAK Tip: BMSO 325 Vrsta stroja: Horizontalna tračna žaga za kovine Izvedba: Polavtomatska žaga z numeričnim krmiljenjem (NC) Način rezanja: Ravni rez 90° Tračna žaga: pribl. 34 × 1,1 × 4.110 mm Hitrost traku, nastavljiva brezstopenjsko Hidravlični sistem za vpenjanje žage Hidravlični sistem za vpenjanje obdelovanca Hladilni sistem Kapacitete rezanja pri 90° Okrogli material: Ø 325 mm Kvadratni material: 330 × 325 mm Pravokotni material: 500 × 325 mm Oprema Numerično krmiljenje (NC) Hidravlična naprava za vpenjanje materiala Avtomatski sistem za vpenjanje žage Hladilni sistem Čistilna krtača za odrezke Opora za material Robustna industrijska izvedba 7 žaginih listov je vključeno Tračna žaga je v rabljenem stanju in izvira iz obratujočega podjetja. Ogled in preizkusna vožnja sta možna po dogovoru.

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Pjdpfxoypbp Do Amfjgr Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Pgedpeypbqbofx Amfsr Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12-14 weeks from order Country of origin: Turkey Price: €249,800 Punching force: 30 t Working area: 2500 x 1250 mm X-axis travel (+ repositioning): 2500 mm Y-axis travel: 1250 mm X-axis speed: 116 m/min Y-axis speed: 80 m/min Combined X+Y speed: 140 m/min Stroke: 40 mm Max. stroke rate (in 1 mm increments, 1 mm sheet thickness): 1200 strokes/min Max. stroke rate (in 25 mm increments, 1 mm sheet thickness): 425 strokes/min Max. stroke rate for marking: 3200 strokes/min Max. cutting capacity with fixed tool station (steel): 6 mm Max. cutting capacity with fixed tool station (stainless steel): 3 mm Max. cutting capacity with index station (steel): 3 mm Max. cutting capacity with index station (stainless steel): 1.5 mm Number of stations: 27 Positioning accuracy: 0.1 mm Repeat accuracy: 0.05 mm Tool changer rotation speed: 22 rpm Auto-index rotation speed: 150 rpm Max. workpiece weight: 120 kg Table height: 940 mm Air pressure: 6 bar Max. punching diameter (D station): 88.9 mm Motor power: 15 kW Length without light barriers: 5750 mm Length with light barriers: 6800 mm Width without light barriers: 5360 mm Width with light barriers: 7360 mm Height: 2310 mm Weight: 12,960 kg CNC control: SIEMENS Sinumerik 840 D SL CAD-CAM software Programming directly on the control unit Remote maintenance module Automatic positioning of the clamps Network connection Automatic tool lubrication UPS for control system Mobile scrap container Brush table Oil cooler USB port Foot pedal Webcam for service Repositioning device for X-axis Custom tools for D index station Manual nesting Tool changer (27 stations without tools and holders): 11 x A-station fixed: 0.8–12.7 mm 11 x B-station fixed: 12.8–31.7 mm 2 x C-station fixed: 31.8–50.8 mm 1 x D-station fixed: 50.9–88.9 mm 3 x D-station index: 50.9–88.9 mm Pgodpfjynnayjx Amfer Light barriers Machine and equipment comply with CE regulations PRICE FCA TURKEY

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €292,500 Punching force: 30 tons Working area: 3000 x 1500 mm X-axis stroke (+ repositioning): 3000 mm Y-axis stroke: 1500 mm X-axis speed: 70 m/min Y-axis speed: 60 m/min Combined X+Y speed: 120 m/min Stroke: 40 mm Max. strokes (1 mm steps, 1 mm sheet thickness): 1200 strokes/min Max. strokes (25 mm steps, 1 mm sheet thickness): 325 strokes/min Max. marking rate: 2800 strokes/min Max. cutting capacity with fixed tool station (St): 6 mm Max. cutting capacity with fixed tool station (Stainless): 3 mm Max. cutting capacity with index station (Steel): 3 mm Max. cutting capacity with index station (Stainless): 1.5 mm Number of stations: 28 Positioning accuracy: 0.1 mm Repeatability: 0.05 mm Tool changer rotation speed: 22 rpm Auto-index rotation speed: 150 rpm Max. workpiece weight: 200 kg Table height: 940 mm Pgedpfxoynna He Amfsr Compressed air: 6 bar Max. punching diameter (D-station): 88.9 mm Motor power: 15 kW Oil tank: 180 l Length without light curtains: 6650 mm Length with light curtains: 7650 mm Width without light curtains: 6300 mm Width with light curtains: 8300 mm Height: 2310 mm Weight: 18250 kg CNC control: SIEMENS Sinumerik 840 D SL CAD-CAM software Programming directly on the controller Remote maintenance module 4 clamp claws Automatic positioning of clamps Network connection Automatic tool lubrication Movable scrap container Brush table Oil cooler USB port Foot pedal X-axis repositioning device Adapted tools for D index station Manual nesting Tool changer (28 stations, without tools and holders): 11 x A-station fixed: 0.8–12.7 mm 11 x B-station fixed: 12.8–31.7 mm 2 x C-station fixed: 31.8–50.8 mm 1 x D-station fixed: 50.9–88.9 mm 3 x D-station index: 50.9–88.9 mm Light curtains Equipment according to CE regulations PRICE FCA TURKEY

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €174,688 Leasing rate: €3,301.60 Laser power: 3 kW Manual table / Shuttle table: Manual table Max. sheet thickness – Mild steel: 16 mm Max. sheet thickness – Stainless steel: 8 mm Max. sheet thickness – Aluminium: 8 mm Max. sheet thickness – Copper: 5 mm Max. sheet thickness – Brass: 8 mm Cutting area: 3060 x 1530 mm X-axis: 3060 mm Y-axis: 1530 mm Z-axis: 140 mm Max. sheet size: 3048 x 1524 mm Max. sheet weight: 160 kg/m² Max. X-axis speed: 90 m/min Max. Y-axis speed: 90 m/min Max. simultaneous speed: 127 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm The HD-FO is our compact entry-level model. Control system, laser source, and chiller are integrated into the machine to keep the overall dimensions as compact as possible. The manually extendable table is moved out laterally for loading and unloading. The cutting head features automatic focus adjustment. This makes the system a particularly economical, fast, and very easy-to-operate production machine. The system includes the following components: - Manual loading and unloading table - Enclosed cutting chamber with protective glass - CNC graphical control with touchscreen - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated chiller for cutting head and laser source - CAD/CAM software Latek for programming and optimized material utilization (nesting) - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Scrap box - Work area lighting - Multi-chamber extraction system - Remote maintenance access - Air conditioning for control cabinet - Equipped in accordance with CE guidelines ALTERNATIVE LASER SOURCES: Pgsdpfxjx U Elhs Amfer Material | 4 kW | 6 kW -----|-----|----- Mild steel S235 | 20 | 25 Stainless steel (304) | 10 | 15 Aluminium (5083) | 12 | 20 Copper | 6 | 10 Brass (CuZn39 Pb3) | 10 | 12 OPTIONS: - Extraction with filter unit - Shuttle table

Stanje: novo, Condition: New Delivery time: Approx. 12 - 14 weeks after order Country of origin: Turkey Price: €230,188 Laser power: 3 kW Table type: Shuttle table Max. sheet thickness - mild steel: 16 mm Max. sheet thickness - stainless steel: 8 mm Max. sheet thickness - aluminium: 8 mm Max. sheet thickness - copper: 5 mm Max. sheet thickness - brass: 8 mm Total connected load: 27.9 kW (with extraction) Cutting area: 4100 x 2070 mm X-axis travel: 4100 mm Y-axis travel: 2070 mm Z-axis travel: 125 mm Max. sheet size: 4064 x 2032 mm Max. sheet weight: 240 kg (for 3 - 12 kW) / 400 kg/m² Max. total weight for double table: 3900 kg (for 3 - 12 kW) / 64 kg Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Max. simultaneous speed: 141 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Table change time: 32 s The HD-FN is equipped with two tables that are automatically exchanged to allow simultaneous cutting and loading/unloading operations. The shuttle table is positioned longitudinally for optimal accessibility to optional loading and unloading systems. The control system, laser source, and chiller are integrated into the machine. The cutting head features automatic focus adjustment. Machine components: - Shuttle table (longitudinally positioned for optimal loading/unloading access) - Enclosed cutting area with safety glass - CNC graphic control with touchscreen - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated chiller for cutting head and laser source - Lantek CAD/CAM software for programming, including autonesting - Positioning laser - Sheet check system (automatic sheet position and dimension detection) - Automatic nozzle cleaning - Centralised lubrication - Scrap collection box - Work area lighting - Multi-chamber extraction system - Light barrier protection for shuttle table - Remote maintenance access - Climate control for control cabinet - Equipped in accordance with CE directives ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Psdpfxjx Urp He Amfsgr Mild steel 20 25 30 35 40 mm Stainless (304) 10 15 25 35 40 mm Aluminium (5083)12 20 30 35 40 mm Copper 6 10 15 15 15 mm Brass (CuZn39 Pb3)10 12 20 20 20 mm OPTIONS: - Extraction with filter unit - Sheet handling systems - Automatic nozzle changer

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €269,588 Laser power: 3 kW Table type: Shuttle table Max. sheet thickness - Mild steel: 16 mm Max. sheet thickness - Stainless steel: 8 mm Max. sheet thickness - Aluminium: 8 mm Max. sheet thickness - Copper: 5 mm Max. sheet thickness - Brass: 8 mm Total connected load: 29.9 kW (with extraction) Cutting area: 6100 x 2070 mm X-axis: 6100 mm Y-axis: 2070 mm Z-axis: 125 mm Max. sheet size: 6096 x 2032 mm Max. sheet weight: 240 kg/m² (for 3 - 12 kW) / 400 kg/m² Max. total weight for double table: 5800 kg (for 3 - 12 kW) / 960 kg Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Max. simultaneous speed: 141 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Table change time: 42 s The HD-FN is equipped with two tables that are automatically exchanged, enabling simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, providing optimal accessibility for optional loading and unloading systems. Control, laser source and cooling are fully integrated within the system. The cutting head features automatic focus adjustment. The system consists of the following components: - Shuttle table (longitudinal position for optimal access to optional loading/unloading systems) - Enclosed cutting chamber with protective glazing - CNC graphical control with touchscreen - Brilase Premium laser source Pedpfex U Elnsx Amfogr - Cutting head with automatic focus adjustment - Integrated chiller for cutting head and laser source - CAD/CAM software Lantek for programming incl. autonesting - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Central lubrication - Scrap box - Work area lighting - Multi-chamber extraction system - Light barrier protection for shuttle table - Remote maintenance access - Air conditioning for control cabinet - Equipped according to CE regulations ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steel S235 20 25 30 35 40 Stainless steel 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass (CuZn39Pb3) 10 12 20 20 20 OPTIONS: - Extraction with filter unit - Automatic nozzle changer

Stanje: novo, Leto izdelave: 2026, Stanje: novo Letnik izdelave: 2026 Številka zaloge: 090204 Dobavni rok: takoj, vmesna prodaja možna Država izvora: Turčija Cena: 4.290 € Pgsdpfx Amjyz Dc Ssfjr Na zalogi: 1 Dolžina reza: 1250 mm Maks. debelina pločevine - konstrukcijsko jeklo: 1,5 mm Zadnji prislon: 500 mm Dolžina: 2250 mm Širina: 1000 mm Višina: 1150 mm Teža: 460 kg Varjena jeklena konstrukcija Z ročnim pritiskačem Zadnji prislon nastavljiv ročno preko ročnega kolesa Navodila za uporabo v ANGLEŠČINI

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €209,800 Leasing rate: €3,371.76 Punching force: 20 tons Working area: 2000 x 1250 mm X-axis travel (+repositioning): 2000 mm Y-axis travel: 1250 mm X-axis speed: 90 m/min Pgodpfx Asynnatsmfjr Y-axis speed: 70 m/min Combined X+Y speed: 114 m/min Max. stroke rate (1 mm increments, 1 mm sheet thickness): 1100 1/min Max. stroke rate (25 mm increments, 1 mm sheet thickness): 375 1/min Max. stroke rate for marking: 1200 1/min Max. cutting capacity with fixed tool station (steel): 6 mm Max. cutting capacity with fixed tool station (stainless steel): 3 mm Max. cutting capacity with index station (steel): 3 mm Max. cutting capacity with index station (stainless steel): 1.5 mm Number of stations: 27 Positioning accuracy: 0.1 mm Repeatability: 0.05 mm Tool changer rotation speed: 30 rpm Auto-index rotation speed: 150 rpm Max. workpiece weight: 100 kg Table height: 940 mm Air pressure: 6 bar Max. punching diameter (D station): 88.9 mm Motor power: 7.5 kW Length without light barriers: 5600 mm Length with light barriers: 6600 mm Width without light barriers: 4200 mm Width with light barriers: 6200 mm Height: 2310 mm Weight: 11,000 kg CNC control: SIEMENS Sinumerik 840 D SL CAD-CAM software Programming directly at the CNC Remote maintenance module Automatic clamping claw positioning Network interface Automatic tool lubrication UPS for control system Movable scrap container Brush table Oil cooler USB interface Foot pedal Webcam for service X-axis repositioning device Customised tools for C+B index stations Manual "nesting" Tool changer (27 stations, delivered without tools and holders): 11 x A-station fixed: 0.8 – 12.7 mm 10 x B-station fixed: 12.8 – 31.7 mm 2 x B-station index: 12.8 – 31.7 mm 1 x C-station fixed: 31.8 – 50.8 mm 1 x C-station index: 31.8 – 50.8 mm 2 x D-station fixed: 50.9 – 88.9 mm Light barriers Equipment compliant with CE regulations

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations Pjdeypbquepfx Amfogr OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Pjdpfxsypbqnj Amfsgr Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Leto izdelave: 2026, Stanje: novo Pgjdpfx Amjyz Dc Ejfjr Leto izdelave: 2026 Številka zaloge: 090203 Dobavni rok: takoj, vmesna prodaja možna Država porekla: Turčija Cena: 3810 € Na zalogi: 1 Dolžina reza: 1020 mm Maks. debelina pločevine – konstrukcijsko jeklo: 1,5 mm Zadnji prislon: 500 mm Dolžina: 1950 mm Širina: 1000 mm Višina: 1150 mm Teža: 420 kg Jeklena varjena konstrukcija Z ročnim pritisnim držalom Zadnji prislon ročno nastavljiv preko ročnega kolesa Navodila za uporabo v ANGLEŠČINI

Stanje: novo, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €188,488 Leasing rate: €3,562.42 Laser power: 3 kW Manual table / shuttle table: Shuttle table Max. sheet thickness – mild steel: 16 mm Max. sheet thickness – stainless steel: 8 mm Max. sheet thickness – aluminium: 8 mm Max. sheet thickness – copper: 5 mm Max. sheet thickness – brass: 8 mm Total connected load: 26.4 kW (with extraction) Pgodpfx Asx U Elbjmfor Cutting area: 3,100 x 1,525 mm X-axis: 3,100 mm Y-axis: 1,525 mm Z-axis: 125 mm Max. sheet size: 3,084 x 1,524 mm Max. sheet weight: 240 kg (for 3–12 kW) / 400 kg/m² Max. total weight for double table: 2,200 kg (for 3–12 kW) / 360 kg Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Max. simultaneous speed: 141 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Table changeover time: 25 s The HD-FN features two tables that are automatically exchanged in alternation, allowing for simultaneous cutting and loading/unloading operations. The shuttle table is positioned longitudinally, providing optimum accessibility for optional loading and unloading systems. Control, laser source, and cooling system are integrated into the unit. The cutting head features automatic focus adjustment. The system consists of the following components: - Shuttle table (longitudinally positioned for best accessibility for optional loading/unloading systems) - Enclosed cutting area with protective glass - CNC graphic control with touchscreen - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated cooling unit for cutting head and laser source - Lantek CAD/CAM software for programming incl. autonesting - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Central lubrication - Scrap bin - Work area lighting - Multi-chamber extraction system - Light barrier protection for the shuttle table - Remote maintenance access - Control cabinet air conditioning - Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material | 4 kW | 6 kW | 12 kW | 15 kW | 20 kW -----|-----|-----|-----|-----|----- Mild steel S235 | 20 | 25 | 30 | 35 | 40 Stainless steel (304) | 10 | 15 | 25 | 35 | 40 Aluminium (5083) | 12 | 20 | 30 | 35 | 40 Copper | 6 | 10 | 15 | 15 | 15 Brass (CuZn39 Pb3) | 10 | 12 | 20 | 20 | 20 OPTIONS: - Extraction with filter unit - Sheet handling systems - Automatic nozzle changer

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Podpfx Ajypbqhemfegr Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks after order Country of origin: Turkey Price: €114,100 Leasing rate: €2,156.49 Pressing force: 135 tons Bending length: 3,050 mm Axes: 4 Stroke: 320 mm Distance between uprights: 3,340 mm Installation height: 500 mm Drive concept: servo-driven belt system Rapid traverse Y axis: 100 mm/s Working speed Y axis: 10 mm/s Return speed Y axis: 100 mm/s Backgauge travel X axis: 650 mm Backgauge travel R axis: 250 mm Length: 4,200 mm Width: 2,200 mm Height: 2,550 mm Weight: 7,300 kg Servo motor drive Power transmission via multi-guided flat belt 4 axes (Y1, Y2, X, R) CNC CONTROL: DELEM DA-66S - 17" 2D graphic display - 3D visualization in simulation and production - Intuitive touchscreen operation (simple contour drawing with a finger) - Easy and convenient data transfer - Multiple simulation modes - Operator-friendly dialog programming - Graphical simulation of bending sequence Servo-driven backgauge on linear guides and ball screws Pgsdowirkyspfx Amfjr Backgauge finger blocks on double linear guides Adapters for upper tool clamping Upper tooling: 1010/A/75°/0.8/105, segmented, bending radius hardened and ground Die holder for 60 mm dies Die: 2009/85° (V 16, 22, 35, 50 mm), segmented, lead-in radius hardened and ground BLVT light curtain protection device Sheet support arms on linear guide rails Side and rear safety fences Equipment in accordance with CE standards Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - No reduction of the working width by the side frames: the distance between the uprights is greater than the bending length - Up to 30% higher productivity compared to conventional hydraulic press brakes thanks to almost immediate response to foot pedal signals - Minimal frame deflection - No crowning system required, as the bending force is introduced at multiple points along the bending length - High repeatability and bending precision across the entire bending length - Low energy consumption - No hydraulic components Options: CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Stanje: novo, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €98,600 Leasing rate: €1,863.54 Bending length: 3,100 mm Max. bending capacity – structural steel: 16 mm Max. plate thickness without pre-bending at D=5x top roller: 16 mm Max. plate thickness without pre-bending at D=3x top roller: 13 mm Pgedpfx Asynm Hfjmfor Max. plate thickness without pre-bending at D=1.5x top roller: 16 mm Max. plate thickness with pre-bending at D=5x top rollers: 14 mm Max. plate thickness with pre-bending at D=1.5x top roller: 12 mm Top roller diameter: 300 mm Bottom roller diameter: 300 mm Side roller diameter: 240 mm Max. opening: 50 mm Working height: 1,140 mm Motor power: 18.5 kW Length: 5,310 mm Width: 1,660 mm Height: 1,140 mm Weight: 11,100 kg 4 rollers PLC Fully hydraulic drive of top and bottom roller (from 30 mm bending capacity for all four rollers) via planetary gearbox Hydraulic side roller adjustment with electronic synchronization Hydraulic bottom roller adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rollers Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE standards OPTIONS: Upper and side plate supports NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity Cone length may be max. 30% or must be more than 60% of the roller length Hardened rollers are recommended

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, številka stroja/vozila: 6.088.177.254, model krmilnika: Durma DT-7, delovna širina: 3.100 mm, najv. debelina pločevine: 13 mm, skupna masa: 11.800 kg, TEHNIČNE PODROBNOSTI Maksimalna debelina pločevine: 13 mm Maksimalna delovna širina: 3.100 mm Izvis: 50 mm Izvedba: nihajna gred Nastavitev kota: ročna Nastavitev rezne širine: motorična Tip omejevala: električni Globina omejevala: 1.000 mm PODROBNOSTI STROJA SPLOŠNO Nadzor: CNC Krmilnik: Durma DT-7 Vrsta pogona: hidravlični Moč: 30 kW Dimenzije in teža Dimenzije (D x Š x V): 4.200 x 2.350 x 2.350 mm Teža: 11.800 kg Transportne embalaže: 1 kos Pjdpfozuwvvjx Amfegr OPREMA CE oznaka Zaščita prstov: fiksna z odklopno zaščito Vrsta mize: miza z krogličnimi ležaji

Leto izdelave: 2024, stanje: novo, Everything is configurable upon request, with very short production and delivery times. Podpjfiqdcsfx Amfegr Further information will be provided upon request. Technical data available on request. Standard Equipment: - Y1, Y2, X (3-axis) - Y1, Y2, X = 650 mm (double guide, aluminum) - D-BEND software for 3D bending simulation and alignment - Manual crowning - R-axis, manual - Backgauge with motor, linear guide, and ball screw - Backgauge fingers with height adjustment (R-axis, manual) - CE upper die holding system - Front support arms for sheet metal, sliding (with T-slot and stops) - Special hydraulic blocks and valves, compliant with international standards - Electrical equipment compliant with international standards Optional Accessories: - D-BEND software for 3D bending simulation and alignment - R-axis CNC (X = 650 mm), X, R (double guide, aluminum) - Upper dies, CE - Lower dies, CE - Lower dies by DURMA - Quick release die clamping system - CNC-controlled, motorized crowning - Backgauge (1000 mm) – rear safety guard with light barrier - Oil cooler - Additional backgauge finger and extra front support system for sheet metal, sliding - Special overseas packaging 8-meter press brake, 320 tons. Bilk9emkq3 With over 60 years of experience in research and production of sheet metal processing machines, and a yearly production of 8,000 machines across three technologically advanced production facilities totaling 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in their sector, with products delivered to 120 countries worldwide. With our branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct local contact from the Durmazlar organization, ready to offer you knowledgeable advice and support when it comes to sheet metal processing machinery. Our demonstration center allows you to experience our machines firsthand, assess their quality and precision technology, and receive the best possible advice tailored to your company’s objectives. Our mission is to be your direct on-site contact, providing you with service offerings such as training and after-sales support. We are pleased to support you directly from Germany—from consultation, through purchase, and throughout the entire lifespan of your machine. With our German office, we are always locally available whenever you need us, ensuring fast and efficient responses. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Prodaja rabljene sodobne preše za upogibanje pločevine Axe and Status DURMA AD-R 30175, 3 metre x 175 ton, CNC Model: AD-R 30175 3050 x 175 Proizvajalec: Axe and Status DURMA AD-R 30175 Leto izdelave: 2015 Priljubljen CNC krmilnik Cybelec DNC 880S Delovna dolžina: 3100 mm / 3 metre Največja tlačna sila: 1750 kN / 175 ton Dvometna zadnja podaja – osi R in X Skupno 4 osi Pgsdpfx Aeiztghemfsr Največji hod: 265 mm Sistem za kompenzacijo upogiba Wila (Wila crowning system) Vpenjalne glave za evro orodje Teža: 10.500 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, dokumentacija / priročnik, Kapaciteta: 4050 mm x 175 ton Psdpeyrdgqefx Amfegr Razdalja med okvirji: 3600 mm Hod: 265 mm Krmiljenje: DURMA DT15 (3D zaslon na dotik) Serijska št.: 73362219436 Dimenzije: 5200 x 1900 mm Višina: 2930 mm Teža: 12.750 kg

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Stock No. 2846 Compounding Extruder Type: Alphatec AD-S 75 with: Segmented screws, co-rotating, intermeshing, Cylinder water-/media-cooled/temperature controlled Throughput up to 1,200 kg/h (depending on material) Podpfxei Dtbis Amfsgr Drive: 250 kW AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders Type ZS-B Siemens control with touch HMI OPTIONAL: > Melt filter / screen changer > Pelletizing systems: strand pelletizer (ST), water ring (WRG) or underwater pelletizer (UWG) > Screw configuration to your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The system is ready for demonstration; test runs with your material can be scheduled by arrangement.

Stanje: novo, Condition: New Delivery time: Approx. 12–14 weeks from order Country of origin: Turkey Price: €76,820 Leasing rate: €1,451.90 Pressing force: 160 tons Bending length: 4,050 mm Axes: Y1 / Y2 and X axis Stroke: 200 mm Distance between uprights: 3,600 mm Throat depth: 300 mm (side frame) Installation height: 430 mm Drive concept: Hydraulic Rapid traverse speed Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge travel X-axis: 620 mm Backgauge speed X-axis: 250 mm/s Table height: 858 mm Pgsdpfx Amswird Hjfor Table width: 104 mm Motor power: 15 kW Length: 4,850 mm Width: 1,900 mm Height: 2,610 mm Weight: 10,500 kg 3 axes (Y1, Y2 and X axis) CNC CONTROL DT-10: - 10" 2D graphical display - Intuitive touch-screen operation (easy drawing of the bending contour by finger) - User-friendly dialogue-based programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet metal blank - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software allows programs to be written on a PC and then transferred to the machine by USB CNC-controlled backgauge with linear guides and ball screw spindles CNC-controlled crowning Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Fiessler AKAS laser safety device mounted on upper beam Sheet support arms Side and rear safety guards Equipment compliant with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to serial production of standardized models without any compromise on quality and accuracy OPTIONAL: CNC-controlled R-axis (X adjustment range = 500 mm) DBend, 3D CAD/CAM import and simulation software (supports step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Leto izdelave: 2024, stanje: novo, MRB-S Series Technical Data (see images) Standard Equipment - CE certification - Conical bending - Motorized rear roll - Additional control panel for upper and lower rolls operated by drive system - SAE 1050 steel rolls - Induction-hardened rolls - Stress-relieved steel construction, with support frames and brake system (for 2.5 and 3m machines) for precise bending - Digital display - Motorized rear roll with traction Optional Equipment - Motorized lower roll clamping - Ground rolls - Extended rolls for profile bending - Special rolls for profile bending - Special packaging for international shipments Pgjdpfofin E Djx Amfer MRB Series: Technical Data (see images) Standard Equipment - CE standard - Digital display - Conical bending - Motorized rear roll with traction - Additional control panel for upper and lower rolls, operated by drive system - SAE 1050 steel rolls - Induction-hardened rolls - Stress-relieved steel construction - Brake system for precise bending Optional Equipment - Motorized lower roll with traction - Polished rolls - Extended rolls for profile bending - Special rolls for profile bending - Special packaging for international shipments All configurations available on request, with very short production and delivery times. We are happy to provide further information upon request. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal working machines worldwide, and has established itself—with its headquarters in Turkey—as one of the world’s largest manufacturers of sheet metal processing equipment. With over 60 years of experience in research and production of sheet metal machinery, annual output of 8,000 machines in three technologically advanced manufacturing facilities spanning a total of 150,000 m², the Durmazlar Group and its DURMA machines today are among the internationally recognized producers in their sector, with products distributed in 120 countries. With our branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. As your direct local representative of Durmazlar, we stand by your side with competent advice and support when it comes to sheet metal machinery. Our demonstration center offers you the opportunity to view our machines on site, experience the quality and precision of our technologies firsthand, and receive the best possible consultation tailored to your business objectives. Our mission is to be your direct local contact, providing comprehensive services including training and customer support. We are pleased to support you from Germany—through consultation, purchase, and throughout the lifetime of your machine. With our German branch, we are always nearby and ready to respond quickly and efficiently whenever you need us. We are your reliable partner for technologically advanced sheet metal processing solutions.

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov od oddaje naročila Država izvora: Turčija Cena: 72.300 € Mesečni obrok ob finančnem lizingu: 1.366,47 € Sila upogibanja: 40 ton Dolžina upogiba: 1250 mm Osi: Y1 / Y2 / X in R os Gib: 200 mm Razdalja med stojali: 1050 mm Izstop v stranskem stojalu: 250 mm Višina vgraje: 440 mm Pogon: servomotorna vretenčna enota Hitrost hitrega giba osi Y: 115 mm/s Delovna hitrost osi Y: 10 mm/s Hitrost umika osi Y: 115 mm/s Zadnji omejevalnik, gib osi X: 650 mm Zadnji omejevalnik, gib osi R: 250 mm Višina mize: 1000 mm Moč motorja: 7,2 kW Dolžina: 1950 mm Širina: 1450 mm Višina: 2650 mm Teža: 3600 kg SERIJSKA OPREMA: Servomotorna vretenčna enota 4 osi (Y1, Y2, X in R) Barvna grafična upravljalna enota DELEM DA-66S - 17" barvni zaslon na dotik - 3D-vizualizacija v simulaciji in proizvodnji - Primerno za celotne aplikacije Windows - Združljivo z DelemModusys - USB- in periferni vmesnik - Podpora za uporabniško specifične aplikacije - Vmesnik za senzorje, upogibanje in korekcijo Servomotorno gnani zadnji omejevalnik na linearnih vodilih in krogličnih vretenih CNC-upravljano izbočevanje Zgornje orodje 1010/A/75°, razdeljeno in upognjeno 4-V matrica 60x60 2009 (V = 16, 22, 35 in 50 mm) Laserska zaščitna naprava Fiessler AKASam, nameščena na zgornji prečki Nosilci za pločevino na linearnih vodilih Oprema v skladu s standardi CE Pedpfxsynm Ays Amfegr Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI PREDNOSTI TE IZVEDBE: - višja produktivnost v primerjavi s klasičnimi hidravličnimi upogibnimi presami - skoraj brezčasen odziv na signal stopalke - nizka poraba energije - kompaktna pogonska vretenčna enota z majhnim številom komponent - brez hidravličnih komponent Možnosti: Osi Z1/Z2 CNC-upravljalna enota DELEM DA-69S 3D vključno z PC-programsko opremo Profile-S s funkcijo uvoza 3D-datotek Hitra sponka za zgornje orodje