Headstock nakup rabljenega (439)

Stanje: rabljeno, Surface Grinding Machine BLOHM Type HFS 6 Serial No.: 10493 Year of manufacture: 1973 Electromagnetic Chuck 600 x 300 mm Grinding Length 600 mm Grinding Width 400 mm Table Longitudinal Travel max. 650 mm Cross Travel 350 mm Distance Spindle Center - Table Surface max. 600 mm Distance Spindle Center - Magnetic Chuck max. 517 mm Table Clamping Surface 1020 x 300 mm Grinding Wheel Diameter 300 mm Grinding Wheel Width 50 mm Grinding Wheel Bore 76 mm Table Longitudinal Feed 2-30 m/min infinitely variable Table Cross Feed 2-65 mm infinitely variable, electric Cross Rapid Traverse 3 m/min Vertical Feed 0.001 - 0.020 mm per indexing pulse Vertical Rapid Traverse 0.250 m/min Grinding Wheel Speed 1400 / 2800 rpm Hydraulic Pump Motor Power 2.2 kW Grinding Spindle Motor Power 5 / 6 kW Power Supply 380 Volt, 50 Hz Total Power Requirement 11 kW - automatic downfeed - hydraulic table longitudinal travel - grinding wheel dressing unit on spindle head - electromagnetic chuck, build height 83 mm - separate coolant system with magnetic filter in filter housing - grinding spindle circulation lubrication - separate switch cabinet (800 x 500 mm) - swiveling control panel - operating manual and spare parts book Space required (L x W x H) 3000 x 2200 x 2100 mm Iasdpjd Hbafjfx Abxou Weight surface grinding machine 3000 kg Weight switch cabinet 200 kg Good condition

Stanje: dober (rabljeno), Leto izdelave: 2000, 4-bed flatbed (the 2 outer beds for Z-carriage; 2 inner beds for tailstock) with traversable Z-carriage on the 2 outer guides; distance 1160 mm on inner guides for tailstock 700 mm Bed length: 5300 mm Centre distance (turning length between chuck height and centres): 3000 mm Centre height: 800 mm Swing diameter over bed: 1600 mm Swing diameter over cross slide (between centres): 1400 mm Swing diameter over carriage: 1200 mm Bed width outer guide: 1160 mm Guide width for tailstock (center): 700 mm Bed welded; stress relieved by WIAP substitute annealing process and vibration damped according to the patented WIAP® VDSF® process (Pat.Nr. 68433; Reg.4230130.30; PCT/CH95-00108; PCT/CH95-00108, PCT/CH95-1072, PCT/CH95-1073) Guide surfaces ground; guides replaceable without bed disassembly 1.2 Headstock / Main drive - fixed-mounted Number of headstocks: 1 Spindle measuring system: digital / linear Axis position monitoring: none; as round axis Spindle bore: 112 mm Spindle nose: A15 DIN 55021 Main spindle motor: 100% duty cycle, 46 kW, 305 Nm Motor 1PH7184 2NE, Power module 6SN112-1AA00-0FA 3-speed gearbox mounted behind the headstock Automated, programmable gearbox via M function Gear stage 1: 5.6-120 RPM Gear stage 2: 16-360 RPM Gear stage 3: 45-800 RPM Torque stage 1 (100%): 15236 Nm Torque stage 2 (100%): 5290 Nm Torque stage 3 (100%): 1904 Nm Max speed: 800 RPM 1.3 Longitudinal and cross slide Qty: 1 each Number of cross slides: 1 Number of longitudinal slides: digital/linear Axis measuring system on the motor: Balluf Axis position monitoring (3-switch-pack): 2000 RPM Axis drive Z-feed motor: 27 Nm, 1005 mm 2 X slides independently traversable Max inner distance, coupling via M function X slide 1: 4-fold turret, and X slide 2 with driven turret Feed force: 27 kN Max feed/rapid feed Z: 6000 mm Feed type: backlash-free ball screw Z-axis travel: 3020 mm Rapid traverse Z-axis (designed for 10 m/min): 6 m/min* Axis drive X-feed motor: 1FT5076 18/22 Nm, 2000 RPM Iodped D Nxksfx Abxjau Feed force: 15 kN Max feed/rapid feed X: 6000 mm Feed type: backlash-free ball screw X-axis travel: 850 mm Rapid traverse X-axis: 10 m/min 1.3a Tailstock Manually adjustable, air-assisted for easy movement Vibration damped with taper for tailstock centre Quill diameter: 200 mm Quill stroke: 200 mm Auxiliary towing device available with Z-slide Clamping with nut & lever / ring nut with various threads around the circumference; repositionable 1.4 Guides All guides are on ground surfaces and resin-bonded Dimensions: 90 x 50 mm Steel guide hardness: approx. HRC 55 - 60 Counter guides with plastic coating Automatic central lubrication with electronic monitoring Heavy units are air-assisted for smooth movement and contamination protection, using WIAP® Press-Air process 1.5 Tool turret with driven tools Tool turret: Baruffaldi TOER 320 Type: K18.0320.12041.B Number of positions: 8 Cylinder shank diameter: VDI 60 Turret disc diameter (outer): 570 mm Turret disc diameter (VDI 60): 476 mm Disc thickness: 95 mm Driven tools: 4

Stanje: dober (rabljeno), Leto izdelave: 2010, Horizontal bed - Prism/flat guideway hardened and ground Working area - Swing diameter over bed: 1000 mm - Swing diameter over cross slide: 700 mm - Cross slide travel (plan): 600 mm Main spindle drive - Digital AC motor – 60% duty cycle: 46 kW Gearbox - ZF planetary gearbox, 2 steps - Electrically shifted - Mounted outside the headstock Headstock - Spindle nose DIN 55026, size A11 - Spindle diameter in front bearing: 190 mm - Spindle bore: 132 mm - Spindle taper: metric 140 - Speed range: 1–1800 rpm Cross slide - Feed range transversal: 0.001–1000 mm/rev Isdpfjr D Nmyex Abxsau - Feed range longitudinal: 0.001–2000 mm/rev - Thread pitches: 0.01–999.9 mm - Rapid traverse transversal/longitudinal: 5/10 m/min - From center distance 4000 mm: 5/7 m/min - Automatic central lubrication - Digital AC servo motors (transversal and longitudinal) Tailstock - Quill diameter: 125 mm - Quill stroke: 280 mm - Taper: MK 6 - Clamping on bed with clamping bolts - Quill operation and clamping: manual - Tailstock roller guide

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 100 mm, pomik po osi Z: 90 mm, moč vretenovega motorja: 1.500 W, skupna višina: 1.370 mm, skupna širina: 800 mm, skupna masa: 360 kg, največja dolžina izdelka: 2.000 mm, število osi: 2, Horizontal lathe from 2019. This SCHAUBLIN 102Mi W25 features a W25 spindle nose and an integrated motor-driven headstock. It is equipped with a pneumatic clamping device and a Tripan-111S quick-change toolpost system. The machine comes with a 3-jaw chuck and a tailstock with live center. If you are looking for a high-quality lathe, you should consider the SCHAUBLIN 102Mi W25 we are offering for sale. Contact us for further details. • Headstock: Integrated motor • Mounting: Bench-mounted (CE version) • Cross-slide: Handwheel-operated cross-slide with digital readout • Tailstock: Morse taper 2 Additional Equipment • Workbench: 2000 x 800 x 900 mm • Lista drawer cabinet: 564 x 725 x 850 mm • Pneumatic W25 clamping device with graphite distributor Iedpfx Abey Snmvsxsau • Tripan-111S quick-change toolpost • Boring bar holder, 30° angled, max. Ø12 mm • 3-jaw chuck W25/Ø100 (cast iron, manual) • Tailstock accessories: Live center 60°, Ø18 mm (Gepy) • Collet set W25 (0.5–25 mm, 50 pieces) • Mebiflex 70 lamp • Max. permissible diameter over bed: 200 mm • Max. permissible diameter over cross-slide: 120 mm (60 mm with rear support) • Center height over bed: 102 mm • Center height over cross-slide: 20 mm • Max. center distance: 470 mm • Bed length: 1,000 mm • Bed height: 168 mm • Main spindle drive: AC motor, 1.5 kW (continuous operation) • Spindle type options: W20 / W25 • Spindle speed (infinitely variable): 100 – 6,000 rpm • Spindle bore: 20 mm (W20) / 25 mm (W25) • Max. bar passage: 14.5 mm (W20) / 19 mm (W25) • Manual slide travel on bed: 442 mm • Cross travel (X axis): 100 mm • X-axis resolution (radius): 0.001 mm (digital) • Longitudinal travel (Z axis): 90 mm (optional: 150 mm for orientable compound slide) • Z-axis resolution: 0.001 mm (digital) • Trapezoidal leadscrew: Ø 9 x 2 mm pitch • Max. tool shank cross-section: 16 x 16 mm (Multifix system) / 12 x 12 mm (Tripan system) • Toolholder diameter: 20 mm (Multifix system) / 12 mm (Tripan system) • Standard tailstock: Morse 2 internal taper, 30 mm spindle outside diameter, 80 mm stroke • Lever-operated tailstock (optional): W20/W25 internal taper, 40 mm spindle outside diameter, 100 mm stroke • Star-wheel operated tailstock (optional): internal taper W20/W25, 40 mm spindle outside diameter, 150 mm stroke • Quick-actuating lever system (optional): Maximum spindle speed 3,000 rpm • Pneumatic clamping system (optional): Adjustable axial clamping force, 500 daN at 5 bar, Max. spindle speed 6,000 rpm • Spindle lock: Pneumatically actuated, locking torque 48 Nm at 5 bar (max. speed 3,000 rpm) • Steadies (optional): Travelling, fixed steady rest, Ø 0.01 to 40 mm • Electrical connection: 400V, 50/60 Hz, rated current 12A (max. 20A main fuse), +/- 5% permissible voltage fluctuations • Power consumption: 1.8 kVA • Noise level under load at operator station: < 60 dBA • Operating temperature: +15°C to +30°C (+5°C to +40°C for digital measuring devices) • Relative humidity: 5% to 80% • Battery for digital measuring devices: 1x lithium 3V, type CR2032 (power consumption: 45 µA, battery life: 5,000 h continuous operation) • Floor load: 263 kg/m² • Floor load capacity: 113 kg/m² Technical Specification Counter Spindle: No Driven Tools: No

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Stratos FU 230 LV (Long Version) woodturning lathe with a centre distance of approx. 1,000 mm (1 meter). This exhibition machine is in its original condition, so you benefit from the full warranty. Technical specifications: - Centre height: 230 mm - Swing over bed: 455 mm (up to 800 mm with the optional outboard turning attachment!) - Centre distance: approx. 955 mm on SPECIAL MODEL STRATOS FU-230 LV (further extendable with optional bed extension!) - Spindle thread: M33 x 3.5 (hardened), with ASR (Euro) anti-rotation safety groove* - Headstock and tailstock Morse taper: MK2 - Speed range (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (graduated scale and trapezoidal thread) - Motor: 1.5 kW / 2 HP (230 V connection) - Weight SPECIAL MODEL LV: 195 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Iasdpotpxw Aofx Abxsu Shipping by freight forwarding: Austria: €105.00 incl. VAT Germany: €125.00 incl. VAT South Tyrol: €150.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your enquiry professionally. Thank you, your NEUREITER Team Related terms: woodturning lathe, lathe, turning lathe, woodturning machine, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Stanje: dober (rabljeno), Leto izdelave: 2001, Centre distance: 600 mm Centre height: 180 mm Max. grinding diameter: 355 mm Min/max. Z-axis feed rate: 0.01 / 15 m/min Axis resolution Z-axis: 0.5 μm Min/max. X-axis feed rate: 0.01 / 10 m/min Axis resolution X-axis: 0.5 μm Grinding wheel (left side): 500 x 40 x 203 mm Peripheral speed of grinding wheel: 45 m/sec External grinding spindle drive power: 10 kW Workpiece spindle speed: 0-1000 rpm Workpiece spindle head taper: MT 5 Tailstock centre taper: MT 4 Iaedpoy Dz R Sefx Abxju Cylindricity adjustment: +10 / -4 degrees CNC control: SIEMENS 840 D Total connected load: 28 kW Machine weight: 5.2 t

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Grinding length: 973 mm Ijdpfewhp Dnsx Abxoau Centre height: 250 mm Workpiece table max. swivelling range: +6° / -9° Centres: Morse taper 5 (MT5) Grinding headstock max. travel: 100 mm Grinding headstock max. swivel range: +45° / -30° Max. grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Max. workpiece weight between centres: 400 kg Internal grinding attachment, max. grindable bore: 160 mm Machine weight: approx. 5,000 kg

Leto izdelave: 1984, stanje: pripravljen za uporabo (rabljen), Krmiljenje: Philips B2T, stroj trenutno ni v obratovanju, delno razstavljen, ventilator glavnega vretenskega motorja je bil popolnoma obnovljen, glavni pogon in mehanske skupine (vretena glava, revolver, kroglični vretenasti vijak) so v dobrem stanju, motor osi Z je okvarjen in je bil že strokovno odstranjen, hidravlični vpenjalni valj zahteva popravilo oziroma zamenjavo. Ogled na lokaciji je mogoč. Iaedpey Uyf Nefx Abxju

Stanje: rabljeno, Leto izdelave: 2012, Swing diameter: 560 mm Turning length: 800 mm Control: C200-4D Siemens 840 D Spindle head: 8 DIN 55026/55021 ISO 7027/1 Iasdpfxjx Emp Ns Abxsu Bar capacity: 90 mm Spindle diameter (front bearing): 140 mm Spindle speed range: approx. 3,500 rpm Spindle motor power 100% / 40%: 43 / 57 kW Torque: 275 / 363 Nm Indexing: 2.5° C-axis: 0.001° Number of turrets: 1 Number of tool stations: 12 positions Speed range – driven tool stations: approx. 6,000 rpm Drive power – driven tool stations: 11 kW Tool holder: 40 x 63 mm DIN 69880 Torque: 21.5 Nm Travel path X: 300 mm Travel path Z: 800 mm Rapid traverse X/Z: 30 / 22.5 m/min Feed force X: 7,200 N Feed force Z: 9,000 N Quill diameter: 65 mm Taper: SK 30 Longitudinal travel: 800 mm Rapid traverse: 10 m/min Total connected load: 51 kVA Machine weight approx.: 14 t Required space approx.: 7.3 x 4.0 x 2.6 m CNC turning and milling center INDEX - G 250 - Accuracy package for main or counter spindle - Selected spindle headstock - Bearingless clamping cylinder - Precision balancing of work spindle, clamping cylinder, and collet clamping

Stanje: dober (rabljeno), Leto izdelave: 2018, Krmilnik Fanuc 31i, premer palice 20 mm, največji rezalni premer 20 mm, hod glavnega vretena 205 mm, Ijdpfx Aozd Eulebxsau največji premer vrtanja 10 mm, največja kapaciteta navojev M8, hitrost rezkanja 8000 obr/min, hitrost vretena 10.000 obr/min, C-os 0,001 stopinje, FMB podajalnik palic, število krmiljenih osi: X1, X2, Y1, Y2, Z1, Z2, C1, C2.

Stanje: dober (rabljeno), Leto izdelave: 2016, Krmilnik Fanuc 31i, premer palice 38 mm, hod glavne vretena 320 mm, največji premer vrtanja 23 mm, največja kapaciteta navojev M16, hitrost rezkanja 6.000 vrt/min, Iodpfx Abszd Etnoxsau hitrost vretena 7.000 vrt/min, pomožno vreteno 7.000 vrt/min, C-os 0,001 stopinje, podaljševanje palic FMB, število krmiljenih osi: X1, X2, X3, Y1, Y2, Z1, Z2, B, C1, C2.

Stanje: dober (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.800 mm, skupna dolžina: 2.500 mm, skupna širina: 1.000 mm, skupna masa: 1.000 kg, hitrost vretena (min.): 1.400 obr/min, največja hitrost vretena: 7.000 obr/min, število vreten: 1, vrsta vhodnega toka: trifazni, TECHNICAL DATA & EQUIPMENT: Serial number: 765 Operating voltage: 380 V Frequency: 50 Hz Rated current: 14 A Voltage range: Geb Azzknsw D T T Sodoka (Note: This entry seems unclear or may be a placeholder/text fragment) Centre height of universal dividing head: 170 mm Centre height of tailstock: 120 mm Centre height of tailstock with intermediate bearing: 170 mm Maximum workpiece diameter between centres: 338 mm Maximum workpiece diameter for unsupported/clamped setup: 600 mm Maximum length between centres: 950 mm Internal taper of dividing head spindle: Morse taper 4 (MK 4) T-slot width, machine base: 12 mm T-slot width, remaining parts: 8 mm Movement ranges: Grinding stroke travel: 190 mm Cross-feed of tool holder: 100 mm Vertical adjustment of grinding head: 325 mm Infeed of grinding spindle: 5 mm Iaodpfx Abjw Nn Aksxsu Coarse travel of tool holder: 230 mm Grinding headstock carrier: 800 mm Universal dividing head, tool slide travel: 330 mm Swivel range grinding headstock carrier: 360° Grinding head: 360°, Tool holder: 360° Universal dividing head horizontal and vertical: 360° Grinding length for spiral grinding: max. 190 mm Maximum spindle rotation of dividing head for spiral grinding: 1.5 revolutions Maximum diameter of grinding wheel: 125 mm Maximum diameter of cutoff wheel: 200 mm Spindle speed: 1400 - 7000 rpm The machine is equipped with two-axis optical measuring devices, a dressing device, table extension with tailstock, and suitable accessories. Scope of delivery includes tool holders, clamping devices, a spiral grinding attachment, radius grinding attachment, a tool holder, and various accessories. COLLECTION NOTES: Loaded onto truck, forklift available Immediately available

Stanje: novo, Leto izdelave: 2025, izvrtina vretena: 40 mm, premer struženja nad ležiščem sani: 340 mm, stružna dolžina: 760 mm, ERL-V Series Variabele Toerental Draaibank ERL-1330 V Ø 340 x 760 mm Iedpfxexal Hmo Abxjau Spildoorlaat Ø 40 mm Traploos regelbaar toerental Sino digitaal uitleessysteem Vaste bril Meelopende bril Multifix snelwisselbeitelhouder Koelinstallatie LED-verlichting Spindelrem Ø 178 mm klauwplaat Hoogte hart t.o.v. bed: 171 mm Draaidiameter boven bed: Ø 342 mm Draaidiameter in uitsparing: Ø 512 mm Draaidiameter boven dwarsslede: Ø 205 mm Afstand tussen centers: 760 mm Breedte van het bed: 230 mm Uitsparing voor het aanloopplaat: 150 mm Hoofdas en spil: Spilneus, interne conus: D1-4, MK 5 Spilcenterhuls: MK 5 x MK 3 Spilboring: Ø 40 mm Spilsnelheid: L 100~500 tpm, H 500~3000 tpm (traploos regelbaar) Langsgeleiding wagen lengte/breedte: 400 mm / 384 mm Dwarsslede verplaatsing: 180 mm Bovenste slede verplaatsing: 95 mm Schroefdraad en voer: Whitworthdraad: 45 soorten / 2~72 TPI Metrisch draad: 39 soorten / 0,2~14 mm DP draad: 21 soorten / 8~44 DP D.P.M.P. draad: 18 soorten / 0,3~3,5 M.P. Langsvoedingen: 0,05~1,7 mm/omw Dwarsvoedingen: 0,025~0,85 mm/omw Achterbank: Pen diameter: Ø 50 mm Pen verplaatsing: 112 mm Spitsconus: MK 3 Motoren: Hoofdspilmotor: AC 2,2 kW (3 pk) Inverter Koelpomp: 1/8 pk Gewichten (netto/bruto): ca. 850 / 950 kg, 1000 / 1120 kg Verpakkingsmaten: Lengte 2000 mm x 2270 mm, Breedte 965 mm x Hoogte 1900 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Surface Planer-Thicknesser, Planer SCM MiniMax FS 30 Specification: • Condition: used, after comprehensive inspection • Manufacturer: SCM MiniMax series • Model: FS 30 • Working width: 300 mm • Thicknesser working height: 240 mm • Table length: 149 cm • Noise reduction combs at the cutterblock • 1.85 kW motor (220V – possibility to convert to 380V) • 3-knife cutterblock for traditional knives (Ø 70 mm) • Side table 43 x 22 cm for drill mounting • Headstock with drill holder Ø 16 mm • Original paintwork • Weight: 260 kg Isdpfxjza E H Ie Abxsau • Overall dimensions: 150 x 105 x 102 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to start and test the machine on site • Free operator training at our company headquarters • The auction price does not include VAT or transport costs Financing and transport: • We arrange transport via our MDD fleet, courier services or external carriers • Financial support in the form of leasing or lease loan available

Stanje: rabljeno, TEHNIČNI PODATKI - Višina konic: 320 [mm] NOSILEC BRUSILNEGA KOLESA – VRETENSKA GLAVA - Dimenzije levega brusilnega kolesa: 400 x 50 x 127 [mm] - Dimenzije desnega brusilnega kolesa: 225 x 20 x 76,2 [mm] - Moč: 3 [kW] - Hitrost vretena: 3000 [vrt/min] - Orientacija nosilca brusilnega kolesa: 270 [stopinj] NOSILEC OBDELKA – VRETENSKA GLAVA - Orientacija nosilca obdelka: 360 [stopinj] Iaodpfx Aboyn R I Texsu - Hitrost vretena: 20 - 400 [vrt/min] - Notranji stožec vretena: Morse 5 - Moč: 0,9 [kW] ELEKTRIČNA NAPAJANJA - Napajalna napetost: 380 [V] OPREMA - Avtomatski delovni cikel (polizdelek, dodelava in povratek) - Heidenhain prikazovalnik - Rezervoar za hladilno tekočino * s papirnim filtrom - 1 notranje brusilno vreteno: 12000 [vrt/min]

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 844 12 64, premer struženja nad prečnim suportom: 215 mm, izvrtina vretena: 40 mm, premer struženja: 380 mm, višina središča: 190 mm, širina na sredini: 1.250 mm, poteza s peresom: 120 mm, skupna dolžina: 3.020 mm, skupna širina: 950 mm, skupna višina: 1.500 mm, največja hitrost vretena: 2.800 obr/min, hitrost vretena (min.): 14 obr/min, skupna masa: 1.850 kg, nosilec puše: MK 3, teža obdelovanca (maks.): 300 kg, Exhibition lathe, available from stock. After Trens filed for insolvency, we are putting in extra effort and are now overhauling TOS and later Trens lathes to a high standard. Every machine is completely disassembled down to the last screw. Here is an overview of a complete overhaul process in our facility: 1. Machine cleaning, disassembly of all machine assemblies 2. Grinding: bed, saddle, cross slide, spindle, tailstock quill Iedpfx Ajv Hzqxjbxsau 3. Grinding and scraping of the compound slide guideways; replacement of the leadscrew with nut and key bar 4. Scraping of the guideways: spindle, saddle, cross slide, and tailstock to geometric positions according to the accuracy protocol 5. Replacement: leadscrew with nut, key bar, and Multifix base body for cross slide (including 2 tool holder cassettes) 6. Complete disassembly and replacement of all necessary spare parts in the apron, gear box, headstock, feed gearbox, tailstock, cross and compound slide 7. Installation or replacement of rack and pinion as needed; repair of leadscrew and feed shaft 8. Complete bearing replacement in all mechanical assemblies 9. Complete replacement of machine nameplates 10. Machine priming, sealing, sanding, polyurethane top coating, and painting of machine accessories – white RAL 9003, anthracite RAL 7016 11. New electrical cabinet with electrical components; replacement of main motor, rapid traverse motor, hydraulic pump, wiring, and LED work area lighting 12. Preparation of the accuracy report and electrical inspection report 13. Inspection and machine acceptance at our premises All overhauled machines are CE-certified and come with a 12-month warranty. CE-compliant version: - Chuck guard with end switch - Front chip guard mounted on the carriage - Rear chip guard - Covers for leadscrew and feed shaft - Emergency stop brings the machine to a complete stop within 2 seconds Special accessories (used): - Three-jaw chuck Ø 190 mm - Four-jaw chuck Ø 190 mm - Three-jaw chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support centre for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 – 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-position tool post

Stanje: dober (rabljeno), TECHNICAL DATA AXES Rapid traverse X, Y: 15,000 mm/min Rapid traverse A, B: 15,000 mm/min Rapid traverse Z1, Z2, E: 18,000 mm/min Rapid traverse C: 90,000°/min Minimum input increment: 0.001 mm Minimum input increment, C-axis: 0.001° MACHINING CAPACITY Max. turning diameter: 20 mm Max. spindle stroke: 205 mm Max. drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. tapping capacity: Stationary: M10 x P1.5; Driven: M6 x P1.0 MAIN SPINDLE Spindle speed: 500 – 10,000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm SUB SPINDLE Max. clamping diameter: 20 mm Max. part length for forward ejection: 150 mm Max. unclamping length: 75 mm Spindle speed: 500 – 10,000 rpm Sub spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operating mode: Right-handed Dimensions: 2,700 x 1,400 x 2,400 mm Weight: 3,400 kg SCOPE OF DELIVERY Includes (not exhaustive): Control: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of delivery as per photos Ijdpfxou Uic To Abxjau We do not guarantee the correctness, completeness or currentness of the information provided.

Stanje: dober (rabljeno), STAR SV-32 CNC Sliding Headstock Lathe TECHNICAL DATA Main Spindle, Bar Capacity: 32 mm Travel: 310 mm Spindle Speed: 7,000 rpm Spindle Drive Power: 7.5 kW Minimum Increment, C-Axis: 0.01° Sub Spindle, Bar Capacity: 32 mm Spindle Speed: 7,000 rpm Iasdou Uicyspfx Abxeu Spindle Drive Power: 7.5 kW C-Axis Resolution: 0.01° Turret: Number of Tool Stations: 10 of which driven: 10 Speed of Driven Tools: 5,700 rpm Driven Tools, Power: 2.8 kW Tool Holder: Number of Tools: 4 of which driven: 3 Speed of Driven Tools: 6,000 rpm Weight and Dimensions: Weight: 3,800 kg Dimensions: 2,700 x 1,400 x 2,400 mm SCOPE OF SUPPLY Includes (not limited to): CNC Control: Fanuc Fire Suppression System: Siemens Oil Mist Separator: Donaldson Transformer High-Pressure Pump Parts Conveyor Chip Conveyor Precise scope of delivery as per photo documentation. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, STAR ECAS 12 CNC Swiss Type Automatic Lathe TECHNICAL DATA Maximum machining diameter: 13 mm Maximum headstock stroke: 205 mm Maximum drilling capacity: Iodpfxjwf Acle Abxeau - Stationary tool: 10 mm - Driven tool: 8 mm Maximum tapping capacity: - Stationary tool: M8 x P1.25 - Driven tool: M6 x P1.0 Maximum milling capacity: 10 mm Maximum thread rolling capacity: M8 x P1.25 Maximum slotting capacity: 1.5 x 4 mm Feed rate (axes Z1, X1, Y1, Z2, X2, Z3, X3, Y3): 18,000 mm/min C1, C2 axes: 194,400°/min Maximum rapid traverse rate (axes Z1, X1, Y1, Z2, X2, Z3, X3, Y3): 18,000 mm/min C1, C2: 194,400°/min Minimum input increment: - X1, X2, X3: 0.001 mm - Z1, Z2, Z3, Y1, Y3: 0.001 mm - C1, C2: 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions (L x W x H): 2,588 x 1,150 x 1,765 mm Center height: 1,040 mm Weight: 3,500 kg SCOPE OF OFFER Includes (not exhaustive): - Star ECAS 12 CNC automatic lathe - Coolant tank / pump - High-pressure unit - Transformer - Operating documentation Exact scope of supply as per photo documentation No guarantee is given regarding the accuracy, completeness, or currentness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Swiss-Type Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of Manufacture: 2009 TECHNICAL SPECIFICATIONS Headstock - Max. bar diameter (mm): 12.7 - Quality of round stock (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - Slide travel X1 (mm): 35 - Slide travel Y1 (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - Slide travel X2 (mm): 35 - Slide travel Z2 (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Driven tools for Tool Carrier 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (number): 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 12.7 Iajdpsy N A S Usfx Abxou - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool stations (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (deg): 0.001 Rear Slide Dragged / Fixed - Z-stroke dragged with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool stations (number): 3 Rear Slide (X4-axis) - Stroke X4 (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool stations (number): 4 Driven tools for rear slide (with X4 axis) - Max. speed (rpm): 10,000 - Driven tools max. (number): 4 - Clamping diameter for drilling tools - driven (mm): 0.5–7 - non-driven (mm): 0.5–10 Coolant System - Pump pressure single stage (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 FEATURES - Chip conveyor - Bar feeder FMB Minimag 18 - High pressure system - Fire extinguishing system Subject to changes and errors in the technical data and specifications.

Stanje: rabljeno, Leto izdelave: 1972, Drehdurchmesser über Bett 1650 mm Drehdurchmesser über Support 1350 mm Drehlänge 10000 mm Drehzahl 1,4 - 280 U/min Umlaufdurchmesser über Bett 1580 mm Spitzenhöhe über Flachbahn 825 mm Bettlänge 13.350 mm Bettbreite 1.120 mm Spindeldurchmesser im vord. Lager 260 mm Spindelbohrung 82 mm Verschiebeweg im Obersupport 500mm Reitstockpinolendurchmesser 200 mm Werkstückgewicht zwischen Spitzen max. 10.000 kg Maschinengewicht ca. 25,5 t Die Maschine stammt aus erster Hand, ist frei von Defekten und befindet sich in einem einem sehr guten Zustand. 2023 wurde der Spindelkasten überholt unter anderem erfolgte ein Austausch der Hauptspindellager und Aufchromen und Nacharbeiten der Hauptspindel und Bodenrad (Lagersitz). Die Führungsbetten befinden sich ebenfalls in einem, dem Alter Iodpfey S Duvsx Abxsau entsprechend sehr guten Zustand. Zubehör - Futterschutz Ausrüstung - 3-Achsen Digitalanzeige - 1 Stk. Lünette - 1 Stk. Rollenbock - Späneförderer (Kabelschlepp 300/100

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Maier ML 26 E CNC Lathe TECHNICAL DATA Number of axes: 11 Spindle bore: 32 mm Traverse speed: 32 m/min Control: Maier Pro GE-Fanuc Guide bush: 451.001 Main Spindle Passage: 26 mm C-Axis: Yes Mechanical indexing 5°: Yes Headstock stroke: 220 mm Main spindle speed: 0 – 6000 rpm Power: 3.7 kW / 5.5 kW (7.5 kW) Collet: 161E Counter Spindle Passage: 26 mm C-Axis: Yes Iasdju S Rivopfx Abxju Mechanical indexing 5°: Yes Max. travel (Z): 220 mm Counter spindle speed: 0 – 6000 rpm Main spindle power: 1.1 kW Collet: 161E Cross Machining Base holders for blanks 5 pcs. 16 x 16: Yes Number of driven tools: 4 Power of driven tools: 0.5 kW Backworking Drive power: 0.5 kW Number of tools: 4 of which driven tools: 4 Collets: ER16 Turret Number of tools: 16 Number of driven tools: 8 Drive power: 0.5 kW C-Axis: 360° Z-Axis: 175 mm X-Axis: 200 mm Collets: ER16 SCOPE OF SUPPLY Includes (not limited to): Maier ML 26 E CNC Lathe Oil mist separator Transformer Chip conveyor High-pressure pump / belt filter unit Fire extinguishing system LNS bar loader Complete operating documentation Exact scope of supply as per photo gallery No guarantee is given for the accuracy, completeness and timeliness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, STAR SH-12 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Turning diameter: 13 mm Headstock stroke: 140 mm Iaedsvllmhjpfx Abxou Spindle speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Number of tools in the turret: 3 Machine dimensions: 1500 x 950 x 1650 mm Weight: Approx. 950 kg SCOPE OF SUPPLY Includes (non-exhaustive list): - STAR SH-12 CNC automatic lathe - Bar feeder - Coolant pump - Transformer For the exact scope of supply, please refer to the photos. We do not assume any liability for the accuracy, completeness or timeliness of the information provided.

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), TORNOS DECO 2000 CNC Lathe TECHNICAL DATA Dimensions and Weights Dimensions: Length: 2000 mm Width: 1260 mm Height: 1950 mm Weight: Empty: 2550 kg Specific floor loading: Approx. 8 daN/cm² Axes 1 movable headstock: Z1, S1 2 independent linear tool systems on vertical slides: X1 / Y1 (S6) – X2 / Y2, S2 1 front tooling unit, 4 spindles: X3 / Z3 1 independent pickup spindle: Y4 / Z4, S4 1 independent tool system for rear machining: X4 (S5) General Data Bar capacity: For min. remnant: 13 mm For max. remnant: 16 mm Maximum workpiece length: With rotating guide bushing: 180 mm Operation in collet: 30 mm Main spindle speed: 12,000 rpm Spindle rotation direction: Preferably: right-hand Main spindle motorization: Continuous duty: 2.2 kW Intermittent duty: 3.7 kW Pickup spindle motorization: Continuous duty: 1.5 kW / Intermittent: 2.2 kW Headstock collet type: F20 Guide bushings: Rotating, fixed Guide bushing collet type: Meister: 605 Number of tools for main operation: Fixed: 2 x 5 / Driven: 3 + 3 Number of front tools: Fixed: 4 / Driven: 3 Tool cross-section: 12 x 12 mm Tool collets: Rotating standard: ESX 20 Number of tools in rear machining: Fixed: 3 + 3 / Driven possible: 3 + 3 Bar loader: Yes Parts removal: Basic version Machine type: Sliding headstock Machine axis height: 1100 mm Headstock travel: 255 mm Barloader position: Right of operator Iedomdn Imopfx Abxoau Bar capacity: 1–16 mm Telescopic tube bore: 6–17 mm Spindle speed: Left / right: -12,000 to 12,000 rpm Headstock feed rate: Max. 20 m/min No liability is accepted for the correctness, completeness, or up-to-dateness of this information.

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Iedpfot E Dbyox Abxsau Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.