Gwd Industrial Gmbh Gwdress-250 nakup rabljenega (89.329)

Stanje: rabljeno, Technical Data – Input Hopper with Hydraulic Walking Floor and Bag Opener for Recyclables from Yellow Bags and Commercial Waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Hopper volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Machine Condition: The input hopper with bag opener was previously used at a large recycling facility, where recyclables from yellow bags or commercial waste were loaded into the hopper by wheel loaders. The bags were opened by the bag opener, with the recyclables either fed into a sorting plant or commercial waste transferred for further processing in a metered manner. The system operated flawlessly until it was dismantled and replaced with a larger unit with higher throughput capacity. The machine was disassembled into individual components in our workshop, partially refurbished, reassembled, and tested under operating conditions. The following refurbishment work was carried out and the following spare parts were replaced: - Disassembly of input hopper and bag opener into individual components; cleaning, partial sandblasting, priming, and painting of steel parts. - Various wear and cover plates were newly fabricated and installed. - Removal of worn ends (approx. 40 cbm) of walking floor tubes. Welding and smoothing of new tubes. - Complete replacement of the sliding plastic plates for the hydraulic walking floor. - Removal of the hydraulic unit from the walking floor, draining of the hydraulic oil tank, replacement of oil filters, refill with new hydraulic oil. - Renewal of all three hydraulic blocks, all valves, sight glass and all hydraulic hoses from the hydraulic unit. - On all three walking floor hydraulic cylinders, the seal sets and hydraulic hoses were replaced. - All six end switches (proximity sensors) of the walking floor were replaced. - The conveyor chains on both left and right sides of the drag chain conveyor were renewed. - Seven driver slats of the drag chain conveyor were replaced. - The drive motor of the tearing discs was replaced. - All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and fittings were renewed. - All sliding plastic plates for the hydraulic adjustment of the bag opener were replaced. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without utilizing the bag opener. - On both sides, the lateral collision protection plates were replaced. - Various wear parts of the bag opener were replaced. - The entire system was electrically rewired and connected. Redpfx Apjy Urtfobju - The system control in the switch cabinet was retrofitted by BRT Hartner to autonomous single control and the standard program was reinstalled into the control system. - The system was commissioned and tested by BRT Hartner, see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment. We accept no liability for technical information or possible errors.

Leto izdelave: 2014, stanje: rabljeno, Industrial water treatment and distillation unit for the processing of industrial wastewater and process water, featuring integrated control system, collection tanks, and new pump installed following recent inspection. Manufacturer: H2O GmbH Model: VACUDEST XS-XL Machine type: Industrial water treatment system Year of construction: approx. 2014 Operating manual available Control system with touchscreen HMI USB port available Ethernet port available Serial interface available Industrial PC control New pump installed Redpfxey S Rr Ue Apbsu Recent inspection completed Industrial wastewater collection tank included Distillate collection tank included Tank material: PP grey Medium: Industrial wastewater Medium: Distillate Medium: Acidic and alkaline aqueous solutions Industrial wastewater tank volume: approx. 10,280 litres Distillate tank volume: approx. 10,732 litres VacuCIP tank volume: approx. 1,306 litres Permissible operating temperature of tanks: 40 °C Permissible operating temperature of VacuCIP tank: 80 °C Specific weight of tanks: 10.00 kN/m³ Specific weight of VacuCIP tank: 11.00 kN/m³ Permissible operating pressure: 0.00 bar VacuCIP alkaline 1.26 pH value: >12 Initial concentration: 1:10 Fully enclosed industrial design Piping and tank system constructed from stainless steel and plastic

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Tensión de conexión: 380 V, potencia conectada: 7,5 kVA, consumo energético específico 2 kW/m² Ensayos de intemperismo UV global con espectro global [similar al arco de xenón], pero con lámparas fluorescentes Volumen de la cámara de prueba: 200 litros Superficie de prueba: 0,75 m² Dimensiones de la cámara de prueba (Al x An x Pr): 1100 x 800 x 250 mm Rango de temperatura sin aislamiento: -20°C a +90°C Rodpfx Aoytr Swspbsu Rango de temperatura con aislamiento: +10°C a +90°C Constancia de temperatura: ±2K Rango de temperatura del punto de rocío: +5°C a +40°C Rango de humedad: aprox. 15 - 95% h.r. Humidificación de muestras con 8 boquillas pulverizadoras El sistema utiliza fuentes de luz UV fluorescente para simular en laboratorio el espectro dañino de la radiación solar, acelerando así los efectos de envejecimiento como cambios de color, pérdida de brillo, formación de grietas, fragilización y degradación del material. Los ciclos programables de exposición UV, control de temperatura y fases opcionales de humedad y condensación reproducen y repiten de forma reproducible las cargas ambientales prácticas. Desmontaje a cargo del comprador.

Stanje: zelo dobro (rabljeno), Professional electric motor by the renowned German manufacturer AC-Motoren GmbH. Robust design intended for continuous operation in machines, pumps, fans, gearboxes, and industrial equipment. The motor is in good visual and technical condition. Flange-mounted (B5) type. Shaft with keyway. Technical data: • Manufacturer: AC-Motoren GmbH • Type: FCA 112M-4 • Power: 4.8 kW • Supply: 3~ / three-phase • Speed: 1440 rpm – 50 Hz • Speed: 1728 rpm – 60 Hz • Voltage 50 Hz: 380-420V / 660-720V • Voltage 60 Hz: 380-480V / 660-830V • Current: 8.36 A / 4.82 A Rsdey Rr Inspfx Apbju • Cos φ: 0.82 • Duty cycle: S1 • Protection class: IP55 • Standard: IEC 34-5 • Mounting: B5 flange • Shaft diameter: 28 mm • Shaft length: approx. 62 mm • Shaft with keyway • Aluminium housing Applications: • Pumps • Fans and blowers • Production machinery • Gearboxes and drives • Workshop equipment Condition: Used item, shows normal signs of use and storage. The motor is in very good visual condition. Included: • Motor as shown in the photos

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2027 - 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY. - Currently available with special conditions - - Used machine also available - => Information for manufacturing companies or dealers with in-house production: Drawings, rights, spare parts, customer and prospect data, planning and manufacturing documents (including plans for a variant with 9 tons pulling force) for the broaching machine can be acquired from us if required. Please get in touch if you are interested. —Currently with special conditions— => New machines are made to order upon request. Short lead times for production and delivery are possible. => Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine designed for long-term operation. Broaching tools (including special mandrels for internal splines etc.) and accessories available. Please inquire separately regarding requirements. All broaching tools and tool holders from other manufacturers can be used with our broaching machine without restriction! Complete production and assembly at our factory in Germany. In addition, we offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears as well as all other necessary components - including electrical parts). Vertical Broaching Machine Type SRM 2027 – NEW MACHINE: Primarily used for manufacturing keyways from 3–28 mm (and beyond) as well as profiles of similar dimensions. Due to its compact design and small footprint, the machine can be effectively used in small, medium, and large enterprises. The low price makes it worthwhile even for small batch or individual production. The drive is powered by a pole-changing geared brake motor. The maintenance-free double spindle drive ensures smooth operation with a central pull point and consistent cutting performance. The open worktable allows even large workpieces to be easily loaded. In most cases, clamping the workpieces is unnecessary. Stroke adjustment is achieved with adjustable limit switches. For short hubs/workpieces, several parts can be stacked for simultaneous broaching. Broaching needles, mandrels, and spare parts available on request. Technical Data: Pulling force: 60 kN at 3 m/min, 40 kN at 6 m/min Broaching speed: 3 m/min + 6 m/min (Optional: stepless speed control from 0 m/min to 6 m/min available with extended electronics) Return speed: 6 m/min Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: unlimited Worktable: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Redjuqbnhopfx Apbou Footprint: 750 x 570 mm Total machine height: 1510 mm Drive power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Paint: Exterior RAL 7035/7036/7016, Interior RAL 3000 Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the current Machinery Directive and carries the CE mark.

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 95 kW (129,16 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, skupna masa: 729 kg, vhodna napetost: 400 V, skupna širina: 920 mm, skupna dolžina: 2.430 mm, skupna višina: 1.060 mm, trajanje garancije: 6 meseci, ogrevalna zmogljivost: 130 kW (176,75 KM), WASSERGEKÜHLTER KÄLTESATZ/WÄRMEPUMPE DAIKIN EWHQ120G 95/130 kW Kälteleistung: 95 kW – 27 Tonnen (12/7°C — 35°C) Heizleistung: 130 kW – 36,9 Tonnen (40/45°C – 7°C) Baujahr: 2019 Rjdpfey U U Tusx Apbju Kältemittelkreislauf: 1 Stk. Wärmetauscher: Plattenwärmetauscher Optionen: Wärmepumpenfunktion Kältemitteltyp: R410A Verdichter: 2 Stk. Copeland (Scroll) Abmessungen: 2,432 x 0,928 x 1,066 m Gewicht: 729 kg Betriebsstunden: 11.437 / 4.712 Std. Zustand: Gebraucht, geprüft, voll funktionsfähig ZUSTAND, PRÜFUNG & EINSATZBEREITSCHAFT Der Kaltwassersatz wird in sieben Schritten technisch geprüft und die Betriebsparameter verifiziert. Zudem erfolgt ein Probelauf an unserer eigenen Teststation, mit Wasser- oder Glykolanschluss und parametergerechter Einstellung nach Ihren Vorgaben. Nach Abschluss der Prüfung erhalten Sie einen ausführlichen Prüfbericht zur Betriebsleistung und zum Gesamtzustand des Geräts. Der Kaltwassersatz ist transportbereit und kann sofort in Betrieb genommen werden. Unsere Ingenieure unterstützen Sie bei der Auslegung der Kälteleistung, der Auswahl des passenden Kühlkonzepts sowie bei der Konfiguration aller notwendigen Ausstattungsoptionen. GARANTIE & SUPPORT Die Qualität des Geräts ist durch eine Garantie von 6 bis 36 Monaten abgesichert. Zusätzlich bieten wir Ihnen an: - Kältemittelbefüllung - Öl- und Filterwechsel - Technische Unterstützung LOGISTIK - Weltweite Lieferung möglich - Unterstützung bei Verladung, Exportdokumentation und Logistik-Koordination Fordern Sie eine ausführliche Beratung an. Fotos, Videos und ein vollständiger Testbericht können auf Anfrage umgehend bereitgestellt werden.

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 873 kW (1.186,95 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: zrak, skupna masa: 9.880 kg, vhodna napetost: 400 V, skupna širina: 2.260 mm, skupna dolžina: 9.400 mm, skupna višina: 2.430 mm, trajanje garancije: 6 meseci, Vzduchem chlazený chiller Climaveneta FOCS-CA/SL 873 kW Chladicí výkon: 873 kW (12/7 — 35°C) Rok výroby: 2009 Výměník tepla: Plášť-trubka Chladicí okruh: 2 ks Typ chladiva: R134a Kompresory: 2 ks Bitzer (šroubové) Počet ventilátorů: 12 ks Rozměry: 9,40 x 2,26 x 2,43 m Hmotnost: 9 880 kg Provozní hodiny: 30 717 / 30 184 h Stav: Použitý, otestovaný, plně funkční STAV, TESTOVÁNÍ & PŘIPRAVENOST Chiller / Kaltwassersatz / prochází sedmistupňovou technickou kontrolou a ověřením provozních parametrů. Dále je testován na naší vlastní zkušební stanici, s připojením na vodu (nebo glykol) a nastavením parametrů dle Vašich požadavků. Po testování obdržíte podrobný protokol s provozními hodnotami a celkovým stavem zařízení. Chiller / Kaltwassersatz / je připraven k přepravě a uvedení do provozu. Naši technici Vám pomohou s výpočty chladicího výkonu, návrhem vhodného schématu chlazení a konfigurací požadovaných variant zařízení. Rodoy U U Hhopfx Apbsu ZÁRUKA & PODPORA Kvalita zařízení je doložena zárukou v rozsahu 6 až 36 měsíců. Naše společnost dále nabízí: - naplnění chladicím médiem, - výměnu oleje a filtrů, - technickou podporu. LOGISTIKA - Možnost celosvětové dodávky - Podpora při nakládce, vyřízení exportní dokumentace a koordinaci logistiky Získejte podrobnou konzultaci. Fotografie, videa a kompletní testovací protokol dodáme ihned na vyžádání.

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 486 kW (660,78 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: zrak, skupna masa: 8.234 kg, vhodna napetost: 400 V, skupna širina: 2.500 mm, skupna dolžina: 12.000 mm, skupna višina: 2.300 mm, trajanje garancije: 6 meseci, Luftgekühlter Kaltwassersatz SWEGON COBALT PRO SLN 58.2 FC 486 KW Redpfx Ajy U Uvpepbsu Kühlleistung: 486 kW / 138,19 Tonnen (12/7 — 35°C) Baujahr: 2015 Optionen: Freikühlung (370 kW) Kältekreis: 2 Stück Wärmetauscher: Rohrbündelwärmetauscher Verflüssiger: Microchannel, Aluminium + Kupfer / Aluminium (Freikühlung) Verdichter: 1 Stk. Bitzer CSH9563-160Y-40D (Schraubenkompressor) + 1 Stk. Bitzer CSH8593-140Y-40D (Schraubenkompressor) Kältemittel: R1234ze Anzahl Lüfter: 20 Stk. (EC-Lüfter) Abmessungen: 12 x 2,5 x 2,3 m Gewicht: 8.234 kg Betriebsstunden: 13.200 / 18.920 h Zustand: Gebraucht, geprüft, voll funktionsfähig ZUSTAND, PRÜFUNG & EINSATZBEREITSCHAFT Der Kaltwassersatz durchläuft sieben Stufen der technischen Überprüfung und der Überprüfung der Betriebsparameter. Er wird zudem auf unserem eigenen Teststand getestet, mit Anschluss an Wasser (oder Glykol) und Anpassung der Parameter nach Ihren Anforderungen. Nach der Prüfung erhalten Sie einen detaillierten Bericht zur Betriebsleistung und zum Gesamtzustand des Kaltwassersatzes. Der Kaltwassersatz ist transportbereit und kann sofort in Betrieb genommen werden. Unsere Ingenieure unterstützen Sie bei der Berechnung der erforderlichen Kälteleistung, der Auswahl des passenden Kühlkonzepts sowie bei der Konfiguration der benötigten Ausstattungsoptionen. GARANTIE & SUPPORT Die Qualität der Anlage wird mit einer Garantie von 6 bis 36 Monaten bestätigt. Unser Unternehmen bietet zudem: - Befüllung mit Kältemittel - Öl- und Filterwechsel - Technischen Support LOGISTIK - Weltweiter Versand möglich - Unterstützung beim Verladen, bei Exportdokumenten und bei der logistischen Koordination Lassen Sie sich ausführlich beraten. Fotos, Videos und ein vollständiger Testbericht können auf Anfrage umgehend bereitgestellt werden.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Complete module for supplying two welding workstations, including integrated welding fume extraction from Teka (welding fume separation class W3, with automatic filter cleaning) for steel. Mobile unit. Small devices (Bosch, Makita or Milwaukee) can be mounted on the holder (see image 4). Alternatively, extraction systems from other brands such as Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and others can also be installed (additional charges apply). Delivered fully assembled, including: - 1 frame - 2 AGA 2020 extension arms - 1 tool cabinet - 1 gas cylinder holder - 2 electrical cable reels - 2 compressed air hose reels The welding workstation is suitable for TIG, MIG and MAG welding units from Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in images 5 & 6 can be purchased separately. Redpfx Asuud Irepbou Currently, a demo unit and a used welding workstation (SAP) are available. We look forward to your inquiry!

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: System-S/N: H 01 07 000-1 / Motor-S/N: 0141708310002, skupna masa: 1.200 kg, The Pregler hydraulic power unit is a reliable and high-performance solution for supplying hydraulic systems in various industrial applications. It combines high-quality components in a robust housing to ensure stable pressure supply and efficient operation. The unit offers flexible application possibilities and can be easily integrated into existing systems, providing a long service life thanks to its durable construction. Rjdpfxewtgwis Apbju

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, We are offering a used rotary indexing table by Weiss. The rotary table features a load capacity of approx. 30 tons, a diameter of roughly 3.5 meters, and a net weight (including motor) of around 6,500 kg. The control unit for the rotary table is included as well, equipped with an SEW frequency inverter, braking resistor, etc. All documentation is available. Rsdsni Awpspfx Apbsu

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Na voljo je avtomatska kabina za peskanje stekla. Delovno območje X/Y: neomejeno/1500 mm, zmogljivost odsesavanja zraka: 1800 m³/h, filtrirna površina: 17 m², diferenčni tlak filtra: 1500 Pa, način delovanja: avtomatsko peskanje površin, filtrirni sistem: kartušni filter z pnevmatskim čiščenjem, transport stekla: vertikalni valjčni transportni sistem, krmiljenje: PLC-krmiljenje z digitalnim upravljalnim panelom. Opremljena z ločeno filtrirno napravo, enoto za napredovanje peskalnih šob, ločilcem vode, zaprto konstrukcijo kabine z gumiranim vhodom. Teža: cca 1550 kg, skupne mere X/Y/Z: cca 4500 mm/2850 mm/1650 mm. Ogled možen po dogovoru. Rodpfey Tn I Asx Apbou

Stanje: novo, Leto izdelave: 2022, Approx. 100.16 linear meters, H: 250 cm, shelf load: 3,000 kg, pallet racks, heavy-duty racks, high racks, industrial shelving, racks available immediately from stock. Specifications: - Height: approx. 250 cm - Depth: approx. 110 cm - Length: approx. 100.16 linear meters - Shelf load: 3,000 kg - Uprights galvanized - Beams 270 x 14 x 5 cm, type T30 - Beams painted orange - Brand new BLT / PR25 - Manufactured in Europe & tested according to current standard DIN EN 15512. - 100% quality at the best price. Rack consists of: - 37 x uprights approx. 250 cm x 110 cm, disassembled - 144 x beams approx. 270 x 14 x 5 cm, T30 Rsdozat Dhopfx Apbeu - 288 x locking pins - Levels: floor + 2 - 324 pallet spaces including floor level -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €8,690.00 net plus legally applicable VAT. You will receive an invoice with VAT shown separately. Frame pre-assembly can be carried out by us for a small additional charge of €12.50 net per unit. Transport: Delivery can be arranged via our partner forwarding company if desired; costs depend on postal code. Assembly: Our trained staff are happy to assist you with professional assembly and disassembly of your warehouse equipment as needed. Our recommendation: Let us know your requirements… We are happy to support your project from planning and ordering to final installation.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Glass Bead Saw Automatic GLSP-200N-AV Pneumatic Automatic Saw Feed Vertical Clamping Device Adjustable Table Height 2 x 45° Fixed Motors Accessories: HM Saw Blade 200 x 2.2 x 32 mm, Z=100 HSS Saw Blade 103 x 2.1 x 32 mm Z=60/45° Left HSS Saw Blade 103 x 2.1 x 32 mm Z=60/45° Right Redpfsuydgex Apbju Glass Bead Simulation System With Feed Cylinder, 1 Revolving Stop With 16 Stops and 4 Clamping Cylinders Counter Profiles for 2 Glass Beads, bearing and web width adjustable With Extraction Connection D=80mm.

Stanje: novo, številka stroja/vozila: 0770, lastna masa: 2.800 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 22.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 640 mm, velikost pnevmatike: 450x300x305, stanje pnevmatik: 100 odstotek, Leto izdelave: 2026, obratovalna teža: 22.800 kg, Transportni voziček TPW 20 AL-AS Tip: TPW 20 AL-AS Nosilnost: 20.000 kg Letnik izdelave: 2025 Dimenzije: Dolžina nakladalne površine: 6000 mm Širina: 2000 mm Višina: 620 mm Transportno dno: 40 mm douglasija Krmiljenje: Vse kolesa vodena – krmilna os Pnevmatike: 450x300 obroči s kovinskimi platišči in dvosmernim stožčastim ležajem Vlečna ruda: 1.600 mm z vlečno zanko 40 mm in varovalom proti izpadu Barva: RAL 2000 Po 6 pritrdilnih blokov na vsako vzdolžno stran za varovanje tovora Dvojno delujoča stabilizacijska naprava montirana na okvirju Rodpehbh Rtsfx Apbsu #Prevoz težkih tovorov #Notranji transportni sistemi #Prikolica za težka bremena 6–100 ton #Težkotovorne prikolice od 3 do 100 ton #Težkotovornična platforma #Platformne prikolice za težka bremena #Vse kolesa vodeno #Transportni voziček #Nizkopodna platforma

Stanje: rabljeno, Ex-protected filter system, extraction unit, central cartridge pulse filter – P. RIES GmbH Type 330 D ATEX Redpfx Asy N Duqepbeu Cartridge filter system, rectangular filter unit, central welding fume extraction Mach. No. 10011932 Year of manufacture: 2020 – as new, unused Airflow: 3,300 m³/h Airflow: 0.9 m³/sec Filter area: 20 m² (1x cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction inlet at filter entrance: 2x Ø 150 mm Exhaust outlet at filter exit: fitted with acoustic enclosure Compressed air connection: approx. 8 bar Motor power: 3 kW Electrical connection: 400 Volt, 50 Hz - Explosion-proof version, ATEX II 2Db 125°C / 3G T4 - Pneumatic rotary filter cleaning, manual activation via push button - Manometer for differential pressure indication (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1x filter cartridge, Ø 325 mm, length 900 mm, P-RIES, type: cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (with acoustic enclosure) equipped with 9x activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Radial fan mounted inside at the top, type IE 3-Premium Efficiency, 12% improved efficiency - Sturdy steel construction, RAL 7035 light grey antistatic powder coated - Dust collection container: retractable drawer, approx. 70 liters (440 x 530 x 300 mm) - EC Declaration of Conformity, operating manual with electrical schematic available Required space (L x W x H): 670 x 700 x 2430 mm Weight (extraction unit): 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg Condition: as new, unused from stock

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj z nizko hitrostjo Redpfjyf I N Aox Apbsu Širina reza - 150 mm Moč motorja - 2,2 kW Hitrost rotorja 200 obr/min Število nožev rotorja - 9 kosov Število nožev statorja - 2 kosa Na voljo 6 kosov, brezhibno stanje Kapaciteta do 25 kg/h Cena 1000 EUR na kos

Stanje: rabljeno, Leto izdelave: 2026, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026-078, delovna širina: 1.600 mm, delovna višina: 100 mm, največja širina rezanja: 1.600 mm, število mest v zalogovniku orodij: 2, Used CNC Cutter/Plotter Cutting area in X and Y: 1,500 x 1,600 mm (demonstration machine) Multifunctional CAM cutting system utilizing CNC knife technology for 2D cutting of paper, cardboard, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid non-metallic materials. Rodpswgc I Rofx Apbou Equipment included with the used machine: • 1 cutting gantry and 1 multifunctional tool head • Multifunctional tool head for mounting 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard equipped with a grey conveyor belt table • Maximum material height: 100 mm Additional tool options available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT powered rotary knife • UCT universal knife (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-Cut angled cutting knife • Printer mark recognition • Camera registration • Punch tool for notches or holes • Router with extraction unit User-friendly design: • Easily exchangeable cutting tools, "PLUG & CUT" • Intuitive user interface • Quick blade change • Vacuum zones can be activated with one click Rapid return on investment: • Low operating costs with high added value • Optimal material utilization with nest expert software modules (not included) • High-speed performance • Consistent precision Technical data: • Short cutting times due to high positioning speed up to 90 m/min • Repeatability: +/- 0.25 mm • Single or multi-layer cutting • Suitable for both sheet and roll materials (expandable with roll off unit) • Fast return on investment (Product image for reference) The machine is CE-certified.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 45 h, številka stroja/vozila: 202023-062, Multifunkcijski CAM sistem za razrez s tehnologijo čistega vodnega curka – brez abrazivov (stroj za rezanje z vodnim curkom). 2 rezalna portala z 2 rezalnima glavama, vključno z Z-osjo. 1 glava za 2D rez, 1 glava za 2D rez. Za razrez pene, plastike, tehničnih tekstilij in drugih ploščatih, prožnih, nemetalskih materialov. Največja višina obdelave: 140 mm. Površina razreza v X in Y osi: 2850 mm × 2750 mm. Razred zaščite: IP54. Vključuje visokotlačno črpalko BFT 40.22 (pribl. 650 delovnih ur). (Slika izdelka je primer) Stroj je CE certificiran. Redpewrn Iyjfx Apbsu

Stanje: rabljeno, Leto izdelave: 2026, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 204065, Used Machine CNC Cutter/Plotter Cutting Area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a powered rotary knife, electrically oscillating knife, and milling spindle (including extraction unit) • Multifunctional tool head for up to 2 interchangeable tools Rodpoif Ek Rofx Apbsu • High-performance vacuum blower for material fixation • Standard equipped with grey conveyor belt table. Turquoise exchange conveyor (offers high contrast for dark materials) available upon request. Additional tools available for expansion (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT powered rotary knife • UCT universal (drag) knife • KCT kiss-cut tool • CTT creasing tool • V-Cut angle cutting knife • Printer mark detection • Camera registration • Punching tool for notches or holes • Milling spindle with extraction unit User-friendly • Easily exchangeable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast return on investment • Low costs with high added value • Optimum material utilization through nest expert software modules (not included in delivery) • High speed • Consistent precision Data: • Short cutting times due to high positioning speed up to 90 m/min • Repeatability +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet goods and roll material (expandable with suitable unwinder) • Fast amortization (Product image as example) The machine is CE-certified.

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 45 h, številka stroja/vozila: 202023-078, Multifunkcijski CAM rezalni sistem na osnovi čiste vodne cure – brez abraziva (vodni rezalnik / vodni rezalni sistem). 2 rezalna mostova z 2 rezalnima glavama, vključno z osjo Z 1 glava z možnostjo poševnega reza 1 glava za 2D rezanje Rjdpfxsfhgvwe Apbju Za rezanje pene, plastike, tehničnih tekstilij in drugih ploskovitih, fleksibilnih, nemetalnih materialov. Največja višina materiala: 140 mm Rezalna površina v X in Y: 2850 mm * 2750 mm Stopnja zaščite: IP54 Vključno z visokotlačno črpalko BFT 40.22 (Produktna fotografija je primer) Stroj ima CE certifikat.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2002-045, Used CNC Cutter/Plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible or rigid, non-metallic materials. Features of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for print mark detection • Multifunctional tool head for holding 2 interchangeable tools • High-performance vacuum blower for fixing the material • Equipped as standard with a gray conveyor belt table (conveyor). Blue-green replacement conveyor available (offers high contrast for dark materials) Further tools can be added (on request): • EOT electric oscillating tool • POT pneumatic oscillating tool • PRT powered circular knife • UCT universal cutting tool (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutting knife • Print mark detection • Camera registration • Punching tool for notches or holes • Milling tool with extraction device User-friendly: • Easily exchangeable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade change • Vacuum zones can be activated by click Rapid amortization: • Low costs with high added value • Optimal material utilization via nest expert software modules (not included) • High speed • Consistent precision Specifications: • Short cutting times due to high positioning speed up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet and roll material (expandable with optional unwinder) • Rapid amortization (Product photo as example) Rjdpfx Apofnlkwebsu The machine is CE certified.

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7212 TECHNICAL DATA - Track width: 250 mm - Shaft width: 400 mm - Shaft diameter: 80 mm - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max. cutting height: 140 mm - Table width with clearance: 730 mm - Table length: 2130 mm From above: - Pawls - Pressure shaft, slip type - Pawls - Pressure shaft, smooth type - Shaft with saw blades - Smooth, pressure shafts, 4 pcs From below: - Slip shaft, smooth type - Pawls - Tracking chain Feeder table with guide rail - Roller width: 460 mm - Feeder dimensions (LxW): 1660x630 mm - Overall dimensions (LxW x H): 2010x630x900 mm Outfeed table - Feed rollers: 8 pcs - Roller width: 800 mm - Overall dimensions (LxWxH): 4400x980x880 mm - Central lubrication - Electric height adjustment of the top frame: 0.55 kW - Electric saw shaft adjustment: 0.55 kW - Stepless feed speed adjustment: 1–39 m/min - Feed motor: 1.1 kW - Main motor: 30 kW - Extraction port diameter: 210 mm - Overall dimensions of multirip saw (LxWxH): 2520x1870x2000 mm + control panel - Total weight: approx. 2500 kg ADVANTAGES – Made in Germany Redpfey Tiuqox Apbeu – High cutting height – Infeed and outfeed table – Used multirip saw in very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 690 mm, skupna dolžina: 600 mm, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, potrebna višina: 900 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, making it ideally suited for small parts or, for example, nameplates. Due to its compact design, the machine is very practical and can be used virtually anywhere. The device is very easy to operate and requires no programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created in just a few clicks, without extensive programming skills. The software automatically increments serial and item numbers after initial setup. In addition, the software can retrieve data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also possible. A laptop with a Windows operating system and laser software comes as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 30-watt fiber laser (optional: 20 watts, 50 watts) - Laser class 1 - Wavelength 1064 nm - Marking field size 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (easy preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: Fume extraction (incl. activated carbon filter) - Welded construction made of sheet steel - 230 V connection - Air-cooled - Laptop with Windows operating system (German or English) Rsdpsy I Nbmofx Apbju - Dimensions (W x D x H): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, hitri pomik os Y: 20 m/min, največja hitrost vretena: 60.000 obr/min, montažni premer: 3 mm, skupna širina: 800 mm, vrsta vhodnega toka: Klimatska naprava, dolžina mize: 320 mm, višina mize: 560 mm, trajanje garancije: 12 meseci, delovna širina: 560 mm, temperatura okolja (min.): 18 °C, okoljska temperatura (maks.): 30 °C, priključek za stisnjen zrak: 6 letvica, delovna dolžina: 320 mm, število osi: 3, The compact table-top version LOW MINI was specifically developed for depaneling small-format series, small quantities of large-format PCBs, and cost-conscious production. PCB materials with remaining tab connections can be quickly and economically separated up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled in all axes, with the milling spindle operating from above. The real highlight of the machine is the easy and straightforward switch of working area from small (320x280mm) to large (320x560mm) format. • Short cycle times due to shuttle operation • X-/Y-axes with linear motor technology • PCB fixation with pin technology • Flexible handling Rjdpfxoxmfdxj Apbju • PCBs with residual tab connections • Milling spindle adjustment with servo technology • Extraction unit • Easy operation • Excellent price/performance ratio Manual depaneling – flexible and cost effective The concept of manual depaneling offers significant advantages in terms of flexibility and cost. Medium batch sizes can be quickly and with minimal dust separated using the LOW MINI. The standard version features dual loading with linear motor technology; for enlarging the working area, single-shuttle operation is possible. Ease of maintenance and operation, combined with the outstanding price/performance ratio, provide a comfortable working experience, making the investment in this depaneler economically worthwhile as well. Axis speed: 160mm/s Repeatability: 0.02 mm Separation accuracy: 0.1mm Shank tools: 0.8 - 2.4mm