Grafični Stroji Fgt - Labelpress nakup rabljenega (69.488)

Stanje: rabljeno, Tip: Bizerba A404 Premer rezila: 330 mm Maks. dolžina izdelka: 540 mm Nledpfx Anogf Sz Njpsh Maks. velikost izdelka okrogle oblike: - najmanjši premer: 50 mm - največji premer: 180 mm Maks. velikost izdelka pravokotne oblike: - najmanjša velikost: 50 x 50 mm - največja velikost: 175 x 240 mm Debelina rezine: 0,5 – 12 mm, neprekinjeno nastavljiva Napetost: 400 V, 50 Hz Dobavni rok: 1 delovni dan po prejemu plačila

Stanje: rabljeno, Tool and Cutter Grinder PARPAS Type AU Serial No. 854/36 Year of Manufacture 1971 Grinding Wheel Diameter: 100 mm Spindle Speed: approx. 3,500 rpm Motor Power: approx. 0.55 kW Power Supply: 380 Volt, 50 Hz - Collet holder (DECKEL system with S20x2 thread) - Collet diameter: 15.0 mm Nedpsdzp T Tjfx Anpelh - Diamond wheel dresser for grinding wheel face Required space (L x W x H): 700 x 350 x 450 mm Weight: approx. 80 kg Good condition

Stanje: novo, Type: Motorized Working length: 1,050 mm Roller diameter: 110 mm Pre-bending capacity: 4 mm Bending capacity: 5 mm Motor: 2.2 kW Minimum bending diameter: 150 mm Nledpfjug Un Ejx Anpeh Top and bottom rollers driven by a single gear system. Rollers made of high-tensile SAE 1050 certified steel. Conical bending system. Induction-hardened rollers. Wire grooves at the ends of the rollers.

Stanje: rabljeno, Leto izdelave: 2021, Numerical control MEGA 300 TS Panel height 60 mm PVC/ABS up to 3 mm Feed speed up to 22 m/min Electronically adjustable working height via CNC Motorized pressure belt with increased pressure Nedpfst Hal Dox Anpelh Infeed system for small panels Panel support guide with electronic CNC adjustment Side roller conveyor with idle rollers for panel support Anti-adhesive unit Straightening unit with two electronically adjustable CNC motors Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA adhesive with glue tank and premelter Pressure roller group for straight profiles with electronically adjustable CNC pressure rollers Anti-adhesive group Milling unit with 2 motors and automatic tilt adjustment End trimming unit with 2 vertically stacked motors Trimming/corner rounding group with 2 tilting motors electronically adjustable via CNC Corner rounding unit with 4 motors Edge scraper unit electronically adjustable via CNC Glue scraper unit Oscillating brush unit Hot air dryer unit

Stanje: pripravljen za uporabo (rabljen), 1 x enota za šivanje 1550 Njdpfxjzlu Sis Anpslh 1 x upravljalnik za navigacijo na dotik 1 x stranski merilnik SEMKO 2 x glave za šivanje HK75Q 6 x napajalnik segmentov 1551, opremljen s sistemom za prepoznavo slik ASIR Samo 2.600 ur delovanja od trenutka, ko je bil naprava prvič uporabljena. 1 x napajalnik za preklopne ovitke 1528, opremljen s sistemom za prepoznavo slik ASIR 1 x trimmer s tremi rezili 1565 1 x sistem za izvajanje končnih izdelkov 1564 Po želji, če je potrebno: Sistem za odvajanje odpadkov Glave za šivanje v obliki zanke Standardne glave za šivanje Ozke glave za šivanje

Stanje: zelo dobro (rabljeno), Malo rabljeni avtomatski stroji za izdelavo TC, TU, TZ profilov. Namenjeni izdelavi in valjanju TC, TU, TZ profilov do debeline kovine 1,5 mm. Nedpex Sx R Sefx Anpolh Tehnične specifikacije: Izdelano v Estoniji Nastavljiva višina profila: 100 – 250 mm Širina profila: 50 mm Zavihani rob profila: 15 mm Minimalna debelina valjane pločevine: 1 mm Maksimalna debelina valjane pločevine: 1,5 mm Razdalja med valji: 300 mm Mere stroja: 900 x 4000 mm Stroj nima giljotine in perforacijskih valjev. Upravljanje je preprosto – dva gumba. Če imate dodatna vprašanja, z veseljem odgovorimo.

Stanje: novo, Bending length: 4100 mm Sheet thickness: 16 mm Top roll diameter: 390 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console Nodpfx Ajd Ab Svjnpslh - Rolls are mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements hydraulically powered Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 12,516 We have numerous references!

Stanje: novo, Bending length: 4100 mm Sheet thickness: 9 mm Nedod Ab S Hepfx Anpolh Top roll diameter: 330 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover, hydraulically opened and closed via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed: EUR 4,682 - Material feeding table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 10,250 We have numerous references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 25 mm Upper roll diameter: 330 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel Nodpfx Anjd Ab S Rspelh - Conical bending device - Digital display for side rolls - Portable control panel - Rolls are mounted with bearings - Upper roll cover hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically driven Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 8,400 We have numerous references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 16 mm Top roll diameter: 300 mm Technical specifications: - Hardened and polished rolls - Full body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover hydraulically openable and closable from the control panel - All rolls driven by hydraulic motor and planetary gear - Lateral movements driven hydraulically Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 Nljdpjd Ab S Uofx Anpsh - Side supports EURO 8,250 We have numerous references!

Stanje: novo, Bending length: 2050 mm Sheet thickness: 4 mm Top roll diameter: 130 mm Technical data: Nlodpfx Anjd Ab Nwopeh - Rear roll driven by motor - Conical bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and transmission system - Portable control panel - Cast iron body - Manual adjustment of rear and lower rolls - In accordance with CE standards Options: - Top roll driven by electric motor – EURO 1,260 - Digital display for rear roll position – EURO 1,010 - Hardened rolls – EURO 1,352 - Special voltage – EURO 480 - Material infeed table - Bottom roll driven by electric motor We have a large number of references!

Stanje: novo, Bending length: 1550 mm Sheet thickness: 4.5 mm Top roll diameter: 130 mm Technical specifications: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron body - Movement of rear and bottom rolls manually operated - In compliance with CE standards Options: - Top roll driven by electric motor, EUR 1,166 - Digital display for rear roll position, EUR 1,010 Nljdsd Ab Nxspfx Anpeh - Hardened rolls, EUR 1,117 - Special voltage, EUR 480 - Material feed table - Bottom roll driven by electric motor We have numerous references!

Stanje: novo, Bending length: 1050 mm Sheet thickness: 5.5 mm Top roll diameter: 130 mm Technical specifications: - Back roll driven by electric motor - Cone bending device - Hardened and polished rolls - Entire body made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Movable control panel - Cast iron body - Manual adjustment of rear and lower rolls - In compliance with CE standards Options: - Top roll driven by electric motor EURO 1,166 Nlodpfxjd Ab Nyo Anpoh - Digital display for back roll position EURO 1,010 - Hardened rolls EURO 799 - Special voltage EURO 480 - Material feed table - Bottom roll driven by electric motor We have numerous references!

Stanje: novo, Bending length: 1550 mm Sheet thickness: 3.5 mm Upper roll diameter: 110 mm Technical Data: - Rear roll driven by motor - Cone bending device - Entire frame constructed from St 52 steel - Main motor with brake system - Upper and lower rolls driven by electric motor, gearbox, and gear system Nledjd Ab N Djpfx Anpsh - Mobile control panel - Cast iron body - Manual movement of rear and lower rolls - Complies with CE standards Options: - Upper roll driven by electric motor EURO 1,166.00 - Digital position display for rear roll EURO 1,010.00 - Hardened rolls EURO 995.00 - Special voltage EURO 480.00 - Material feed table - Lower roll driven by electric motor We have numerous references!

Stanje: rabljeno, Further technical data available on request. The scrubber-dryer with a 55 cm working width and semi-automatic drive is the ideal machine for cleaning small to medium-sized areas, even those with stubborn dirt. It is designed for high productivity, low operating costs, and extremely simple operation. - Battery-powered scrubber-dryer with semi-automatic drive, disc brush, and dirty water suction - The floor is left dry and safe with just one pass - Designed for high productivity, low operating costs, and very simple use - Automatic squeegee release on accidental impacts protects against damage - Yellow-colored maintenance points for quick and easy servicing - Adjustable dosing of cleaning solution - Automatic water and brush stop when the machine is not in operation - Mechanical operation of brush and squeegee via levers Cleaning area: 1,000–1,600 m² Theoretical productivity: 1,450 m²/h Working width (brushes): 510 mm Working width (suction): 680 mm Packaging unit: 1 Dimensions & weights: Length: 1,165 mm Width/depth: 541 mm Height: 995 mm Weight: 61.5 kg Nedpfxjl Iir Sj Anpelh Brushes Brush diameter: 510 mm Brush pressure: 27.5 kg Brush speed: 160 rpm Electrical connection Total power: 870 W Power supply: 24 V battery Battery runtime: 240 min Battery charging time: 12 h Operating voltage: 24 V Tanks Fresh water: 40 l Dirty water: 42 l

Stanje: novo, Bending length: 3100 mm Sheet thickness: 6 mm Upper roll diameter: 210 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console - Rolls mounted with bearings - Upper roll cover, hydraulically openable and lockable via control panel - All rolls driven by hydraulic motor and planetary gearbox Njdpfxsd Ab Tke Anpelh - Lateral movements are hydraulically driven Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 7,070 We have many references!

Stanje: novo, Bending length: 1250 mm Sheet thickness: 3 mm Top roller diameter: 90 mm Technical data: - Cast iron body - Manual or motorized bending (optional) - After bending, the top roller can be opened to the side for easy material removal - Conical bending device Nledpfx Ajd Ab Tyonpsh - Manual adjustment of the rear and lower rollers via handwheel - Portable control panel - Compliant with CE standards Options: - Motorized rear roller - Digital display for showing rear roller position - Body cover EURO 314,-- - Hardened rollers EURO 550,-- - Variable rotation speed We have many references!

Stanje: novo, Working width: 6020 x 1000 Bending beam rotation: approx. 140° Weight approx.: 2 t Dimensions (LxWxH): approx. 7000 x 1700 x 1500 mm Connection rating: Three-phase 230 V / 400 V - 1.5 kW Nsdpfx Asrzx Eisnpelh Max. bending angle: 180° Bending length: 6020 mm - HIGH ECONOMIC EFFICIENCY - FULLY HYDRAULIC - HIGH-QUALITY STEEL - CONSISTENT PRESSURE APPLICATION - HAND SHEARING UNIT - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for tinsmiths as well as large and small sheet metal processing businesses. It stands out for its simple and well-engineered design and is particularly low-maintenance. The RULI long folding machine operates fully hydraulically; clamping and bending are controlled with a single small lever. The swing-mounted, vertically closing upper beam ensures evenly distributed clamping pressure along the entire length and prevents the sheet from slipping during clamping. Two degree scales allow for reading and setting individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm thickness).

Stanje: rabljeno, Weight approx.: 450 kg Dimensions (LxWxH): 1250 x 1350 x 1550 mm Y-travel: 300 mm Z-travel: 200 mm X-travel: 350 mm Speed range: 80–2200 rpm Table size: 600 x 200 mm Description: - Coolant system - Machine lamp - Including machine vise Speeds: 80 – 2200 (8) rpm Tool holder: DIN 2078 ISO30 (drawbolt M12) Working area: 300 x 200 x 350 mm Table: 600 x 200 mm Rapid traverse X/Y: 1200 mm/min Quill stroke: 45 mm Max. feed force: 1600 Nm Spindle motor: 1.1 / 1.4 kW Nedsrgvbpopfx Anpjlh Vertical table: 600 x 200 mm Distance vertical milling spindle – milling table: 20 – 370 mm Distance horizontal milling spindle – milling table: 84 – 434 mm Feed in X axis (stepless): 20 – 200 mm/min Length: 1250 mm Width: 1350 mm Height: 1550 mm Weight: 450 kg

Stanje: novo, Working width: 5020 mm Bending beam rotation: approx. 140° Power supply: Three-phase current 230 V / 400 V – 1.5 kW Max. bending angle: 180° Folding length: 5020 mm - HIGH EFFICIENCY - FULLY HYDRAULIC - HIGH-GRADE STEEL CONSTRUCTION - CONSISTENT CLAMPING FORCE - MANUAL CUTTING DEVICE - WITH PROFILING UNIT - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal piece of equipment for sheet metal fabricators and both large and small metalworking businesses. It stands out due to its simple and proven design, and it is particularly low-maintenance. The RULI long folding machine operates fully hydraulically, with clamping and bending each controlled by a small lever. The swing-mounted, vertically closing upper beam allows for uniformly distributed clamping pressure across the entire working length, preventing sheet displacement during clamping. Two degree scales allow for easy reading and precise setting of individual bending angles. The machine is to be installed on a concrete floor or ceiling (minimum thickness 12 cm). Nodpfx Anorzx Ebjpslh

Stanje: novo, Shaft diameter: 50 mm Roller diameter: 155 mm Working speed: 4.5 m/min Motor power: 1.5 kW Length: 750 mm Width: 1000 mm Height: 1400 mm Weight approx.: 400 kg Technical data: - Steel frame - Two directly driven rollers - Rollers are hardened - Roller shafts made of special steel, hardened and ground - Roller shafts mounted in bearings - Standard rollers - Guide rollers - Horizontal and vertical working position Options: - Digital display EUR 700 - Lateral angle guide rollers EUR 1,100 - Double working speed EUR 700 PK 35 File type Size Min. Dia Notes 1. 60x10 40x10 500 400 Standard Rolls 2. 100x15 60x10 450 350 Standard Rolls 3. 35x35 20x20 900 300 Standard Rolls 4. Ø35 Ø30 600 400 Optional Rolls 5. Ø70x2 Ø30x2 1,000 500 Optional Rolls 6. 2”x2.9 1”x2.3 1,000 350 Optional Rolls 7. 70x30x2 50x40x3 1,200 1,200 Optional Rolls 8. 50x3 40x3 1,700 600 Optional Rolls 9. 50x50x5 40x40x5 800 600 Optional Rolls Nedped Eqqwefx Anpolh 10.50x50x6 30x30x3 1,000 500 Optional Rolls 11.60x7 30x4 700 400 Standard Rolls 12.60x7 30x4 800 500 Standard Rolls 13.60x7 30x4 700 500 Standard Rolls 14. UPN 80 UPN 30 1,000 500 Optional Rolls* 15. UPN 80 UPN 30 1,200 800 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities are based on plate yield strength of 260 N/mm²

Stanje: novo, Shaft diameter: 30 mm Upper roll diameter: 148 mm Lower roll diameter: 118 mm Working speed: 2-4 m/min Motor power: 0.7 - 0.85 kW Length: 600 mm Width: 800 mm Weight approx.: 220 kg Height: 1450 mm Technical specifications: - Steel frame Nljdsd Eqqzspfx Anpsh - Two lower rolls are powered - Direct gear drive system - Upper roll rotates freely (idle) - Hardened rolls - Roll shafts are hardened and ground - Dual-speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working positions Options: - Digital readout €600 - Angular side guide rolls €900 - Dual speed STANDARD - Brake motor €150 PK 30 File Type Size Min. Dia Notes 150x10 20x6 1800 300 Standard Rolls 280x15 30x6 700 400 Standard Rolls 330x30 10x10 900 200 Standard Rolls 4Ø 30 Ø 10 900 200 Optional Rolls 5Ø 60x1.5 Ø 25x1.5 1000 600 Optional Rolls 6 1/2”x2.9 1/4”x1.8 600 300 Optional Rolls 750x30x3 40x20x2 1200 800 Optional Rolls 840x3 30x2 1200 800 Optional Rolls 940x40x5 30x30x4 600 300 Optional Rolls 1035x35x5 30x30x4 600 400 Optional Rolls 1150x6 20x3 600 400 Standard Rolls 1250x6 20x3 600 400 Standard Rolls 1350x6 20x3 600 400 Standard Rolls * A special washer (spacer) may be required / Only with special beam bending attachment • Capacities given for 260 N/mm² plate yield strength

Stanje: novo, Sheet thickness: 1.8 mm Bending length: 1050 mm Top roll diameter: 70 mm Sheet length: 1050 mm Details: - Cast iron frame - Motorized bending - Conical bending device Nsdpjd Ab T Ssfx Anpolh - Manual adjustment of the rear and lower roll via handwheel - Mobile control panel - Compliance with CE standards Options: - Rear roll with motor: €825 - Digital display for rear roll position: €1,010 - Frame cover: €274 - Hardened rolls: €392

Stanje: rabljeno, Leto izdelave: 2018, Izvedba: Enosleden večplastni vodnik, napetost: 380 VAC 3P/N/PE/50 Hz, moč: 15 kW, tlak zraka: 0,6 MPa, dimenzije stroja X/Y/Z: približno 7000 mm/2050 mm/2370 mm. Stroj za nanášanje prevleke je trenutno predelan za sistem TECC-Connect in ga je mogoče ponovno predelati za postopek varjenja. Stroj je popolnoma funkcionalen in pripravljen za uporabo. Dokumentacija je na voljo. Ogled je možen po dogovoru. Nedpfxjz A Ei Rj Anpelh

Stanje: novo, Model designation Nedpfjgvqxtex Anpslh FALKEN R 1