Georgii Kobold Namizni Vrtalnik nakup rabljenega (811)

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Dsdpfx Ajiknp Rjc Nech Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Maximum retractable tool diameter 180 mm

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 690 mm, skupna dolžina: 600 mm, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, potrebna višina: 900 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, making it ideally suited for small parts or, for example, nameplates. Due to its compact design, the machine is very practical and can be used virtually anywhere. Dcsdpfx Asy I Nbmoc Nsh The device is very easy to operate and requires no programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created in just a few clicks, without extensive programming skills. The software automatically increments serial and item numbers after initial setup. In addition, the software can retrieve data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also possible. A laptop with a Windows operating system and laser software comes as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 30-watt fiber laser (optional: 20 watts, 50 watts) - Laser class 1 - Wavelength 1064 nm - Marking field size 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (easy preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: Fume extraction (incl. activated carbon filter) - Welded construction made of sheet steel - 230 V connection - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (W x D x H): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Spodnji vretenasti rezkar SCM T130 Premer vretena: 35 mm Dcodpozakgmsfx Ac Njh Skupna dolžina vretena: 160 mm Glavni motor z močjo 5,5 kW Hitrosti vrtenja z menjavo jermena: 3000/4500/6000/7000/10000 o/min Vreteno se vrti levo in desno Električno dviganje vretena

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, številka stroja/vozila: V 453572, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 1.770 h, moč: 6 kW (8,16 KM), vhodna napetost: 400 V, vhodni tok: 19 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, premer vretena: 30 mm, vrtilni razpon: 90 °, nastavitev vzdolžnega vodila: poganjan z motorjem, vrsta aktuacije: električni, največja hitrost vrtenja: 9.000 obr/min, vrtljajska hitrost (min.): 3.000 obr/min, širina mize: 900 mm, dolžina mize: 2.405 mm, skupna dolžina: 3.000 mm, skupna širina: 1.260 mm, skupna višina: 1.800 mm, skupna masa: 1.300 kg, leto zadnje generalne obnove: 2026, Oprema: CE označba, Martin T26 DuoControl Spindle Moulder 5/6 kW (6.8/8.2 HP) - 400 V, 50 Hz with neutral conductor, CE-compliant configuration with 2-axis control for spindle height and fence positioning, electromechanical tilt adjustment with digital display, including swiveling control panel with CPS Gamma V safety system *with 40 mm / 160 mm long milling arbor // Table size: 2405 mm x 900 mm // Table height: 900 mm // Table openings: electrical adjustment 70 mm - 220 mm // Weight: 1300 kg // Spindle speeds: 3000 / 4500 / 6000 / 9000 rpm with quick-action belt tensioning system // Displays: electric speed display digital (LED) display for spindle height (absolute and relative), as well as tilt angle automatic correction value display for milling depth dual hour meter for total and batch operating hours // Milling spindle: electrically tiltable +/- 45.50° via button, electric height adjustment with rapid and fine feed, steep taper SK 40, Djdszamwuepfx Ac Njch Dornfix quick change system including torque wrench maintenance-free electric braking Electro-pneumatic locking via selector switch // Spindle travel: 150 mm at 5/6 kW and 7.5 kW, 125 mm // Milling fence: Aigner integral fence Milling jaws made of hard-coat aluminum, with mountings for profile board or guide rail Handwheel adjustment with mechanical digital counters Infeed jaw adjustable separately Max. tool diameter: 250 mm // Extraction system: Extraction port 120 mm diameter at the fence Extraction port 120 mm diameter under table // Maintenance equipment: Central lubrication via pump Spindle lubrication via grease quantity controller 1 x open-end wrench 1 x torque wrench for Dornfix system 1 x oil gun 1 x grease gun filled with long-life grease 1 x ball bearing for guide ring 62 mm 1 x FRS95 arc guard for work on the guide ring, with extraction port and feed strip // Electrical equipment: Lockable main switch, automatic star-delta starter, wear-free electric brake Contact for extraction system control, undervoltage release, CEE torque socket for feed unit (5-pin socket) Selector button for direction of rotation, motor protection switch, and winding protection BG inspection certificate no. 991002 GS-certified for wood dust no. 991001 EC type-tested no. 991003 Additionally: 1 x electrically adjustable table opening 1 x support for swiveling feeder mount with motorized height adjustment with control panel 1 x extension for pull-out table width

Stanje: rabljeno, Leto izdelave: 1985, Tischbohrwerk Union BFT80/3-1 Tischbohrwerk Spindel-Durchmesser: 90 mm Aufnahme: ISO 40 Drehzahl: 8 – 1.600 U/min X-Achse: 1.100 mm Y-Achse: 1.100 mm Z-Achse: 1.700 mm W-Achse: 600 mm 4-Achsen Digitalanzeige Djdjzbq S Eepfx Ac Nech Tischabmessung: 1.000 x 1.100 mm Drehtisch: 360° (B-Achse) Maximale Tischbelastung: 2.500 kg Ausstattung: - Umfangreiches Werkzeugsortiment - Betriebsanleitung - Digitale Anzeigen auf X, Y, Z, W Spindel-Leistung: 23 kW Maschinengewicht: 9.100 kg Ursprungsland: Deutschland

Stanje: rabljeno, Leto izdelave: 1981, Velikost mize: 1200 x 1000 mm, višina mize: 850 mm, obseg nagiba: -5° do +45°, hitrosti rezkanja: 3000/4000/5000/6000/8000/10000 obr/min. Nastavitev višine: 120 mm, vpenjalo orodja: MK5, vključno z integralnim paralelnikom. Teža: cca. 1000 kg. Lokacija skladišča: Nattheim. Dcedox It Auopfx Ac Nsh

Stanje: novo, Leto izdelave: 2026, zmogljivost vrtanja: 40 mm, globina grla: 1.220 mm, hitrost vretena (min.): 110 obr/min, največja hitrost vretena: 2.900 obr/min, skupna masa: 1.710 kg, pomik vretena: 200 mm, nosilec vretena: MK 4, Drilling capacity in St 60: 40 mm Drilling capacity in GG 20: 40 mm Thread cutting (St 60 / GG 20): M 27 / M 36 Toolholder short spindle: MK 4 Dodpfotzkmbex Ac Nsch Swing (distance spindle center / column) min. - max.: approx. 210 - 1220 mm Clamping surface machine table: approx. 1200 x 510 mm T-slots in machine table: number x width 3 x 18 mm Distance drill spindle – table min. - max.: approx. 375 - 675 mm Distance drill spindle – base plate (= option) min. - max.: approx. 1075 – 1375 mm Spindle stroke: approx. 200 mm Feeds approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / rev Main spindle speed range: infinitely variable 110 - 2900 rpm. Dimensions (height x width x depth): approx. 2500 x 1200 x 1710 mm Net weight: approx. 1710 kg Drive power spindle motor 400 V, 50 Hz: approx. 2.2 / 4.0 kW

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Dimensions and Travel Distances Tool Holder: SK 40 Table Size: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance, spindle lower edge (min.): mm 140 Distance, table upper edge (max.): mm 740 Drilling radius (min.): mm 540 Drilling radius (max.): mm 1590 U-axis travel: mm 2600 Y-axis travel: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling capacity, solid material St 60: mm 40 Drilling capacity, solid material GG 22: mm 50 Tapping capacity St 60: M 36 Tapping capacity GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled: kW 5.5 at 100% duty cycle Spindle speed range: rpm 15 - 2800 Maximum torque: Nm 250 Constant torque range: rpm 15 – 200 Feed Drives X-axis - AC servo motor: kW 0.25 Y-axis - AC servo motor: kW 0.25 Z-axis - AC servo motor: kW 4.50 W-axis - AC servo motor: kW 2.50 U-axis - AC servo motor: kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Infinitely variable feed rates: mm/min. 5 - 2000 Feed force: N 12000 Accuracy Positioning accuracy X, Y-axis over 1200 mm: mm ±0.075 Repeatability X, Y-axis: mm ±0.03 Positioning accuracy Z-axis: mm ±0.05 Repeatability Z-axis: mm ±0.03 Positioning accuracy W-axis: mm ±0.05 Repeatability W-axis: mm ±0.03 Electrical Data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), extendable Display: TFT flat panel, backlit, excellent readability from all angles Position indications: Cartesian or polar, dimensions absolute or incremental Unit of measurement: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool recommendations by machining operation, cutting data recommendations by material Tool management: max. 500 tools Subroutine technique: yes Machining cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible per cycle Chip breaking/chip removal: Possible in drilling cycle Drilling patterns: row, circle, matrix Basic software: Dialog programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry points Zero-point determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of castings and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Data interfaces: USB port Dcodpjv If T Tjfx Ac Neh Paintwork (new paint) Standard paint, two-component textured finish Machine upper section: light grey RAL 7035 Machine base: signal blue RAL 5005 Documentation Operating and programming manual Electronic wiring diagram Spare parts drawings Test protocol for mechanics, electronics, and safety device

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 9.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 1.000 mm, Stroj je v dobrem tehničnem stanju, vključno z vrtljivo mizo S 35, dimenzije mize 2850 x 3150 mm (fotografija v prilogi), 2 vpenjalni plošči, kotna glava HUI 50, zalogovnik za 80 orodij, krmilni sistem Siemens 840 D. WRD 150 CNC Leto izdelave: 2008 Krmilni sistem: SINUMERIK 840 D Dodpfx Aoy U Ndzjc Njch X-os: 9000 mm Y-os: 4000 mm Z-os: 1000 mm W-os: 800 mm Moč: 60 kW Zalogovnik za: 80 orodij Vpenjalni plošči 2 kosa, 6000x2000 mm Kotna glava HUI 50

Stanje: rabljeno, 1 kos namiznega vrtalnega stroja FLOTT TBZ16ST Dcjdpfx Acjy Th Nyo Noh 400 Voltov Barva: kot je prikazano, glede na slike in ogled Stanje: rabljeno

Stanje: rabljeno, 1 kos namizni vrtalni stroj STEINEL BT4.52 400 Voltov Barva: kot je prikazano na slikah in ob ogledu Dcsdpfjy Thx Ujx Ac Njh Stanje: rabljeno

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, moč: 0,5 kW (0,68 KM), vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, premer orodja: 13 mm, globina vrtanja: 60 mm, vrsta aktuacije: ročni, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 400 obr/min, skupna širina: 224 mm, skupna dolžina: 385 mm, širina mize: 220 mm, dolžina mize: 300 mm, skupna masa: 52 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Namizni vrtalni stroj Flott TB 13 STW electronic Letnik izdelave: 1988 Plinska vzmet zamenjana leta 2025 Brezstopenjsko elektronsko uravnavanje vrtljajev od 400 do 5000 vrt/min Priključek: 230 V Motor 0,5 kW Vrtalna zmogljivost v jeklu: 10 mm, v sivi litini: 13 mm Vrtalna globina: 60 mm Prikaz globine vrtanja z mm-skalo Nastavljiv globinski omejevalnik z mm-vijakom Previs: 185 mm Višinsko nastavljanje nastavljivo preko plinske vzmeti Maksimalna razdalja med vrtalno glavo in mizno površino: 270 mm Stožec vrtalne glave: B16 Vključno z blagovno hitro vpenjalno glavo 0-10 mm Dimenzije: Širina: 224 mm Globina: 385 mm Višina: min 635 mm, maks. 835 mm Teža: 52 kg Dedpfsy S Tm Ijx Ac Nech

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 3.000 mm, Stroj je popolnoma funkcionalen pod napajanjem, v zelo dobrem tehničnem stanju. Opremljen je na primer z kotno glavo, kotniki, orodji itd. Krmilni sistem Heidenhain 530. Dcodpfxoy Udhbj Ac Noh

Stanje: rabljeno, Rabljeni stroj Dcodpfx Acsy Si Axs Neh Oprema in tehnični podatki: Vrtalna naprava, sestavljena iz vrtalnega motorja z držalom za navojne svedre z možnostjo namestitve 6 svedrov glede na vrtalni vzorec z valjčnimi transporterji na levi in desni strani vrtalnega stroja Razpoložljivost: takojšnja Skladišče: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 1995, Premer vretena: 120 mm X-hod: 1500 mm Y-hod: 1000 mm Krmiljenje Fanuc Namizni vrtalni stroj Wotan Rapid 1 Leto izdelave: 1995 Krmiljenje Fanuc Pomiki X: 1500 mm Y: 1000 mm Z: 1000 mm B: 360° Djdpjy U N I Hjfx Ac Nech Nosilec orodja BT 50 Leta 2017 izveden retrofit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Prodajamo to napravo. Dodpex Auzljfx Ac Nech Vpenjanje ISO 50, hlajenje skozi vreteno Os X: 9.000 mm Os Y: 4.000 mm Prečni pomični stroj S 30 z nosilnostjo 30.000 kg, dimenzija 2.500 x 3.500 mm Obrati vretena 10–3.000 obr/min Plošče dimenzij 4000x2000 mm (1 kos) in 2000x2000 mm (1 kos) Heidenhain iTNC530 Dva kosa kotnika, pripadajoče orodje in dodatki. Gre za popolno delovno mesto. Stroj bo sproščen iz proizvodnje konec januarja 2026.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Ponujamo ta stroj priključen, možno ga je preizkusiti. Video stroja lahko pošljemo preko aplikacije WhatsApp. Generalna prenova leta 2008. Heideihaim positip 855. X 6.400 mm, Y 2.800 mm, W 1.120 mm, ISO 50. Teža 32.500 kg. Priloženi dve plošči dimenzij 602x2000x400 mm. Stroj vključuje glavo. Djdezak A Iopfx Ac Njch

Stanje: rabljeno, Technical details: Drilling capacity in steel (diameter): 32 mm Throat depth: 320 mm Quill stroke: 250 mm Spindle taper: MT 4 Spindle speed: 63 - 710 rpm / 8 steps Feed rates: 0.07; 0.13; 0.254; 0.42 mm/rev Max. distance spindle/table: 600 mm Table clamping surface: Ø 450 mm Table rotation: 360° Tilting table: yes, adjustable in degrees Drilling table adjustment: 600 mm Dsdpfewcygcox Ac Nech Column diameter: 215 mm Total power requirement: 2.2 kW Machine weight approx.: 730 kg Machine dimensions (LxWxH) approx.: 1.0 x 0.58 x 1.4 m Equipment: Quick-action drill chuck RÖHM Supra 16 mm Coolant tank with pump Outlet socket for 220V

Stanje: rabljeno, Technical details: Drilling capacity in steel (diameter): 13 mm Throat depth: 160 mm Drilling stroke: 60 mm Spindle taper: MT2 Spindle speed: 210 - 2580 rpm / 16 steps Feed: manual mm/rev Table clamping surface: 200 x 185 mm (fixed) Max. distance spindle/table: 620 mm Dcjdpfevgbdxsx Ac Noh Table clamping surface: 260 x 265 mm (adjustable) Max. distance spindle/table: 160 - 460 mm Swiveling table: yes Table adjustment: 300 mm (hand crank) Column diameter: approx. 70 mm Total power requirement: 900 Watts Machine weight approx.: 90 kg Machine dimensions approx. LxWxH: 0.6 x 0.31 x 1.7 m The machine is equipped with a RÖHM 1-13 drill chuck including chuck key. Spindle rotation: right-hand Small machinist's vice included

Stanje: rabljeno, Technical Details: Drilling capacity in steel (diameter): 22 mm Throat depth: 205 mm Drilling stroke: 100 mm Spindle taper: MT2 Spindle speeds: 2 steps rpm Feed: manual mm/rev Distance spindle/table max.: 150 - 600 mm Base plate clamping area: 350 x 400 mm Table clamping area: 360 x 280 mm Table rotation: 360° Drill table adjustment: 450 mm with hand crank Dcjdpfx Acovxf Irj Nsh Column diameter: Ø 100 mm Control voltage: 380 V Total power requirement: 0.8 kW Machine weight approx.: 270 kg Machine dimensions (LxWxH): 0.6 x 0.5 x 1.95 m Column drilling machine incl. machine vice. In stock.

Stanje: rabljeno, Leto izdelave: 1992, Technical Details: Spindle diameter: 100 mm X travel: 1500 mm Y travel: 1450 mm Z axis: 930 mm W axis: 506 mm B axis (table): 360° Control system: Heidenhain TNC 407 Tool holder: SK50 Spindle speed: 5 - 1,600 rpm / stepless Dsdpeu Idqbofx Ac Noch Table load capacity: 4.0 t Table size: 1100 x 1400 mm Rotary table: 360° Feed rates (X/Y/W/Z axis): 2 - 2000 mm/min Rapid traverse (X/Y/W/Z axis): 5000 mm/min Total power requirement: 40 kW Switch cabinet dimensions: 2000 x 600 x 2000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Machine weight approx.: 14 t CNC drilling and milling machine with hydraulic power unit Equipment: Measuring probe Electronic handwheel Hydraulic counterbalance Y-axis Universal milling head And a range of accessories – please inquire! Subject to prior sale.

Stanje: rabljeno, Leto izdelave: 1976, Technical details: Dcedpfjwi Iqvsx Ac Njh Drilling capacity in steel (diameter): 32 mm Throat depth: approx. 400 / 50 mm Horizontal travel of drilling head: 400 mm Drilling head vertically adjustable: 400 mm Quill stroke: 150 mm Spindle taper: MK4 (Morse taper 4) Grinding spindle speed: 100 - 2000 rpm Throat distance (spindle): min./max.: approx. 400 / 50 mm Vertical arm adjustment: 850 mm Horizontal arm adjustment: 400 mm Arm length: 1360 mm Arm pivot (horizontal): swiveling, mm/min Drill spindle speeds: 100...2 steps rpm Feed rates: 0.1 / 0.2 / - step mm/rev Table size: 00 x 510 mm Distance from table to bottom edge of spindle: min./max.: 350 / 800 mm Total power requirement: 2.4 kW Machine weight approx.: 1.8 t Machine dimensions approx. LxWxH: 1.3 x 1.3 x 2.25 m Equipment: 2x base rails Provision for mounting a vertical table Accessories: Various clamping devices

Stanje: rabljeno, Leto izdelave: 1982, Technical details: Drilling capacity in steel (diameter): 28 mm Throat depth: 300 mm Drill stroke: 150 mm Drilling capacity in cast iron: 30 mm Spindle taper MT: MT3 Spindle speed: 200; 300; 500; 800; 1250; 2000 / 6-step rpm Feed: manual mm/rev Max. spindle-to-table distance: 50 - 600 mm Dcsdpeu Idkbjfx Ac Noh Table clamping surface: 330 x 300 mm Rotating table: no Table adjustment: 550 (hand crank) mm Column diameter: Ø 125 mm Total power requirement: 1.5 kW Machine weight approx.: 300 kg Machine dimensions approx. LxWxH: 0.7 x 0.45 x 1.87 m Equipped with RÖHM Supra 3 - 16 mm quick-action drill chuck

Stanje: rabljeno, Leto izdelave: 1989, Technical Details: Drilling capacity in steel (diameter): 28 mm Throat depth: 285 mm Dcedpfou Idkzex Ac Noh Drilling stroke: 165 mm Drilling capacity in cast iron: Ø 35 mm Spindle taper: MT 3 Spindle speed: 65 – 1,750 / 4x stepless rpm Feed: 0.1; 0.2; 0.3 manual/automatic mm/rev Max. spindle-to-table distance: 80 – 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 mm vertical Column diameter: Ø 130 mm Total power requirement: 7.5 kW Machine weight approx.: 273 kg Machine dimensions approx. LxWxH: 0.9 x 0.6 x 1.9 m The machine is capable of thread cutting. Direction of rotation (left/right) selectable via foot switch and/or depth stop. Table is swivelable and height-adjustable.

Stanje: rabljeno, Leto izdelave: 1971, Technical Details: Drilling capacity in steel (diameter): 16 mm Throat depth: 250 mm Drilling stroke: 125 mm Spindle taper: MT 2 Spindle speed: 350 - 2000 / 8-step rpm Table clamping surface: 280 x 355 mm Rotatable table: yes ° Table adjustment: 520 mm vertical Distance table-lower edge spindle: max. 600 mm Column diameter: 110 mm Total power requirement: 1.1 kW Machine weight approx.: 272 kg Machine dimensions (LxWxH) approx.: 0.6 x 0.5 x 1.8 m Equipment: - 13 mm drill chuck - 10 mm twist drill with 45° countersink grinding - Machine vice Dsdpfx Aceu Idhms Nech