Enflex F 1400 nakup rabljenega (35.131)

Stanje: rabljeno, prevoženi kilometri: 29.002 km, moč: 74 kW (100,61 KM), prva registracija: 03/2015, vrsta goriva: dizel, lastna masa: 2 kg, največja dovoljena obremenitev: 2.400 kg, skupna masa: 5.000 kg, konfiguracija osi: 4x4, medosna razdalja: 2.500 mm, zavore: drugo, barva: zelen, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 5, število sedežev: 2, dolžina tovornega prostora: 2.100 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 300 mm, obratovalne ure: 5.802 h, Oprema: dodatne luči, filter saj, pogon na vsa štiri kolesa, računalnik na krovu, servovolan, spojka prikolice, zapora diferenciala, žerjav, * German vehicle * One owner * Condition as shown in photos * Only 29,002 km original mileage Lrjdpfx Ajvhqu Ajhusn * Only 5,802 operating hours * Three-way tipper with Fassi crane mounted behind the cab * Fassi crane type F30CY023 * Lifting capacity: 995 kg at 1.85 m | 810 kg at 3.00 m | 580 kg at 4.10 m | 440 kg at 5.20 m | 335 kg at 6.30 m reach * Hook height: 9 m * 5th and 6th hydraulic control circuit * 2 hydraulic outriggers * 2 trailer couplings * Trailer load: 3,500 kg * Tipper body dimensions: Length 2,100 mm - Width 1,400 mm - Height 300 mm * Dücker UNA 200 flail mower available at extra charge * High front wall * Aluminium side panels * Height-adjustable municipal workbench with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Power steering * 2 comfort seats * Rear window * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Rotating beacon lights * Wheelbase: 2,500 mm * Gross vehicle weight: 5,000 kg * Unladen weight: 2,600 kg * Payload: 2,400 kg If a new TÜV inspection is requested, we will be happy to provide an offer via our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new safety inspection (SP), and without new accident prevention inspection (UVV). Further trucks/LKWs can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the item to avoid any misunderstanding regarding its condition and suitability. Viewing and inspections are possible at any time by prior appointment and are expressly encouraged. All specifications are without guarantee. No liability is accepted for any errors or inaccuracies in this offer. The buyer is obliged to independently verify condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: rabljeno, prevoženi kilometri: 33.596 km, moč: 74 kW (100,61 KM), prva registracija: 10/2011, vrsta goriva: dizel, lastna masa: 2.700 kg, največja dovoljena obremenitev: 2.300 kg, skupna masa: 5.000 kg, konfiguracija osi: 4x4, medosna razdalja: 2.500 mm, zavore: drugo, barva: zelen, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 5, število sedežev: 2, dolžina tovornega prostora: 2.100 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 300 mm, obratovalne ure: 5.333 h, Oprema: dodatne luči, filter saj, pogon na vsa štiri kolesa, računalnik na krovu, servovolan, spojka prikolice, zapora diferenciala, žerjav, * German vehicle * One owner * Condition as shown in photos * Only 33,596 km original mileage * Only 5,333 operating hours * Three-way tipper with Fassi crane mounted behind the cab * Fassi crane model F28B.22 * Lifting capacity: 1.85 m = 995 kg; 3.10 m = 765 kg; 4.30 m = 545 kg; 5.50 m = 395 kg * Hook height: 8 m * 5 + 6 control circuits * 2 hydraulic outriggers * 2 trailer couplings * Trailer load: 3,500 kg Lredovhqhiepfx Ahusn * Tipper body dimensions: length = 2,100 mm; width = 1,400 mm; height = 300 mm * Dücker UNA 200 flail mower available at additional cost * High front panel * Aluminum drop sides * Municipal workbench, height-adjustable with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Power steering * 2 comfort seats * Rear window * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Beacon * Wheelbase: 2,500 mm * Gross vehicle weight: 5,000 kg * Unladen weight: 2,700 kg * Payload: 2,300 kg If a new TÜV inspection is required, we are happy to offer a quote through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new SP and without new UVV inspection. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the item to avoid any misconceptions about condition or suitability for the buyer. Viewing and inspection are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for mistakes or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, moč: 0,75 kW (1,02 KM), S&F vibracijska sita | Sito tip ASM-150 Izložbena mašina Proizvođač: S&F GmbH Tip: ASM-75 Kapacitet prosejavanja: cca. 15 - 25 m³/h (u zavisnosti od materijala) Frakcije: 3 Lrjdpsy Sixtofx Ahujn Površina sita: 1,5 m² po veličini otvora sita Sita (nivoa): 3 kom Veličina otvora sita: - 1. nivo: perforirano sito, D = 40 mm ili po dogovoru - 2. nivo: perforirano sito, D = 10 mm ili po dogovoru Snaga pogona: 1,5 kW, 3 x 400 V, 50 Hz Dimenzije (D x Š x V): 2.700 x 1.500 x 1.300 mm Izvedba: Profi Line Težina mašine: cca. 1.200 kg Boja mašine: RAL 7043 sivomaslinasta // Zaštitni poklopac: RAL 3020 crvena Izbor sita po želji Izlaz materijala prema zahtevu kupca Pogodno za prosejavanje sledećih rasutih materijala: - drveni iver - piljevina i drvna prašina - biomasa - drveni peleti - drveni ugalj - otpadno drvo - kora Vibraciono sito | Sito za drvene iverice | Vibraciona mašina za prosejavanje | Plansko sito | Vibraciono sito | Rotacioni separator | Sito za iverice | Sito za BHKW

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, moč: 1,5 kW (2,04 KM), S&F vibrirajući sito | Sito tip ASM-150 Mašina za demonstraciju Proizvođač: S&F GmbH Tip: ASM-150 Kapacitet prosejavanja: cca 15 - 25 m³/h (u zavisnosti od materijala) Frakcije: 3 Površina sita: 1,5 m² po veličini mreže sita Broj etaža sita: 3 Veličina otvora sita: - 1. etaža: perforirano sito, D = 40 mm ili po dogovoru - 2. etaža: perforirano sito, D = 10 mm ili po dogovoru Pogonska snaga: 1,5 kW, 3 x 400 V, 50 Hz Dimenzije (D x Š x V): 2.700 x 1.500 x 1.300 mm Izvedba: Profi Line Težina mašine: cca 1.200 kg Boja mašine: RAL 7043 saobraćajno siva B // Zaštitno kućište: RAL 3020 saobraćajno crvena Lredpfx Ahjy Sixmousn Umetci sita po izboru Izlaz materijala prema zahtevima kupca Pogodno između ostalog za prosejavanje sledećih rasutih materijala: - Drvena sečka - Piljevina i drveni otpad - Biomasa - Drveni peleti - Drveni ugalj - Otpadno drvo - Kora drveta Vibraciono sito | Sito za sečku | Vibrirajuća sita | Plansko sito | Vibraciono sito | Rotacioni separator | Sito za drvenu sečku | Sito za BHKW

Stanje: novo, Na prodaj industrijska dvovijačna (dvopolžasta) črpalka priznanega proizvajalca Leistritz Nürnberg. Ledpfjyga U Hsx Ahusrn Črpalka je nova / skladiščena, nikoli uporabljena – v zelo dobrem stanju, kot je prikazano na slikah. Identifikacijski podatki (iz tablice): • Proizvajalec: Leistritz Nürnberg • Tip / serija: LN • Model: 48/80-F-C • Serijska številka: 6812.129 • Konstrukcija: dvopolžasta črpalka (twin screw / twin spindle) Lastnosti in prednosti: • dva sodelujoča polža (brez stika kovina–kovina) • zelo nizke pulzacije pretoka • delovanje pri različnih viskoznostih medija • miren tek in dolga življenjska doba • možnost delovanja v obe smeri • rešitev za neprekinjeno industrijsko obratovanje Uporaba: • olja in mazalna sredstva • industrijske in tehnološke instalacije • hidravlika, energetska industrija • hladilni / mazalni sistemi • procesne aplikacije Stanje: • novo • brez poškodb • priključki zaščiteni s pokrovčki • Cena velja za 1 kos.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 16.444 km, moč: 1.400 kW (1.903,47 KM), prva registracija: 06/2025, vrsta goriva: dizel, lastna masa: 32.260 kg, največja dovoljena obremenitev: 52.000 kg, skupna masa: 52.000 kg, konfiguracija osi: 8x8, naslednji pregled (TÜV): 07/2027, gorivo: dizel, barva: rdeča, vrsta prenosa: samodejen, število prestav: 6, emisijski razred: Euro 5, število sedežev: 3, skupna dolžina: 12.300 mm, skupna širina: 3.000 mm, skupna višina: 4.000 mm, Leto izdelave: 2015, obratovalne ure: 1.563 h, obratovalna teža: 52.000 kg, Oprema: dodatne luči, klimatska naprava, pogon na vsa štiri kolesa, popolna servisna zgodovina, registracija tovornjaka, servovolan, spojka prikolice, Dva VOLVO motorja po 700 KM Lredpfxexy Nb Us Ahuon Tehnični pregled veljaven do 07-2027 Seznam dodatne opreme – glejte slike!

Stanje: rabljeno, prevoženi kilometri: 370.000 km, moč: 279 kW (379,33 KM), prva registracija: 06/2008, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 4, Oprema: ABS, klimatska naprava, Proizvajalec: Scania Model: P380 LB6x2?4 Hvidtved Larsen FlexLine 310 Leto: 2008 Stanje: Dobro Serijska številka: XLEP6X20005200736 Ref. št.: 527999 Datum registracije: 10-06-2008 Moč (HP): 380 Prevoženi kilometri: 370000 Menjalnik: GRS905 ročni Eurotip: 4 Rezervoar za dizel: 1 Prostornina rezervoarja: 300 L Tip kabine: CP16 Radio: ? Kolutne zavore: ? Lodpjxlw Efsfx Ahuern ABS: ? Motorna zavora: ? Dimenzija pnevmatik: 315/80R22.5 - 315/80R22.5 - 315/80R22.5 Preostanek profila: 60% - 60% - 50% Prednje vzmetenje: zračno Zadnje vzmetenje: zračno Medosna razdalja: 4500 mm Orodjarna: ? Hidravlični sistem: ? Skupna masa: 26000 kg Lastna masa: 17510 kg Nosilnost: 8490 kg Nadgraditelj: Hvidtved Larsen FlexLine 310 Prostornina cisterne: 10.000 L Visokotlačna črpalka: Uraca KD 716G Visokotlačna zmogljivost: 390 l/min 140 bar Delovne ure visokotlačne črpalke: 2179 Vakuumska črpalka: Wittig RFW 200 Vakuumska zmogljivost: 20.600 l/min Delovne ure vakuumske črpalke: 2660 Daljinsko upravljanje: ?

Stanje: rabljeno, prevoženi kilometri: 465.000 km, moč: 279 kW (379,33 KM), prva registracija: 05/2008, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, emisijski razred: Euro 4, Leto izdelave: 2008, Oprema: ABS, filter saj, Proizvajalec: Scania Model: P380 8x2/6 Hvidtved Larsen Flexline 414 Leto: 2008 Stanje: Dobro Serijska številka: XLEP8X20005199494 Sklicna št.: 1438032 Datum registracije: 30-05-2008 Zadnji ogled: 24-09-2025 Moč (HK): 380 Kilometri: 465000 Menjalnik: Opticruise GRS905 Euro tip: 4 + filter delcev Rezervoar za gorivo: 1 Prostornina rezervoarja: 350 l Vzvratna kamera: ? Klimatska naprava: ? Tip kabine: CP16 Radio: ? Hladilnik: ? Disk zavore: ? ABS: ? Motorna zavora: ? Dimenzija pnevmatik: 385/65 - 385/65 - 315/80 - 385/65 Preostanek profila: 40 - 60 - 80 - 50 % Sprednje vzmetenje: Zračno Zadnje vzmetenje: Zračno Medosna razdalja: 5300 mm Orodna omara: ? Skupna masa: 32.000 kg Lrjdpexzmzzofx Ahuen Lastna masa: 18.650 kg Nosilnost: 13.350 kg Proizvajalec nadgradnje: Hvidtved Larsen Kapaciteta nadgradnje: 14.000 l Visokotlačna črpalka: Uraca P3-10 Visokotlačna zmogljivost: 127 l/min, 160 bar Delovne ure visokotlačne črpalke: 1072 Vakuumska črpalka: Wittig RFW 200 Vakuumska zmogljivost: 20.600 l/min Delovni čas vakuumske črpalke: 5116 Daljinsko upravljanje: ? Grelec vode: ?

Stanje: dober (rabljeno), TMZ F-102 76x106 cm stroj za štancanje Stroj je potpuno ispravan i spreman za rad. Proizvedeno u Španjolskoj. Format: 760 x 1060 mm Težina: 3600 kg Napajanje: 380 V Instalirana snaga: 4,5 kW Oprema: – pneumatska spojka – upravljačka ploča – montažni okvir – 3 načina rada: kontinuirani, s vremenskim odmakom, ručni Lodpfxjy Nfhxs Ahujrn – centralno podmazivanje – zaštitne ograde – radni alati – lim za pritisak

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, potovalna razdalja osi X: 14.000 mm, pomik osi Y: 2.600 mm, pomik po osi Z: 1.500 mm, hitro pomikanje X-os: 35.000 m/min, hitri pomik os Y: 35.000 m/min, hitri pomik na osi Z: 35.000 m/min, največja hitrost vretena: 5.000 obr/min, največja hitrost vrtenja: 5.000 obr/min, skupna širina: 5.000 mm, skupna višina: 4.900 mm, skupna dolžina: 22.000 mm, dolžina mize: 14.000 mm, širina mize: 2.000 mm, obremenitev mize: 50.000 kg, Model FP, idealen za različne aplikacije na področju srednje do velikih komponent. Talni rezkalno-vrtalni stroj. Visoka dinamika s hitrostmi do 35 m/min. INA linearni vodilni sistem. Hidromehansko vpenjanje sani. Ortogonalna rezkalna glava za obdelavo pod katerimkoli želenim kotom. X-os: 14.000 mm Y-os: 2.600 mm Z-os: 1.500 mm Dolžina mize: 14.000 mm Širina mize: 2.000 mm Nosilnost mize: 50.000 kg Moč na vretenu: 43 kW Hitrosti vretena: 5.000 min⁻¹ Nasadilo vretena: 50 ISO/BT/MK Pomik po X-osi: 35.000 mm/min Pomik po Y-osi: 35.000 mm/min Pomik po Z-osi: 35.000 mm/min Samodejno indeksiranje glave: Ortogonalna 1° Delovne ure: 3.500 h Dolžina: 22.000 mm Širina: 5.000 mm Lsdpfx Aovn S E Nehusrn Višina: 4.900 mm Teža: 31.000 kg

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 14.000 mm, pomik osi Y: 4.500 mm, pomik po osi Z: 1.900 mm, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of manufacture: 2023 Capacities / Travel paths: Longitudinal (X): 14,000 mm Vertical (Y): 4,500 mm (*5,076.5 mm) Transverse (Z): 1,900 mm * The vertical machining stroke can be extended by 576.5 mm thanks to two horizontal positions of the automatically indexing milling head. Table plate (2 units): Length: 6,000 mm; Width: 3,000 mm Number of T-slots on the table surface: 12 pcs Width of T-slots: 22 mm Distance between slots: 250 mm FIBRO Rotary & Traversing Table: Dimensions: 3,000 x 3,000 mm Traversing axis: 1,500 mm Max. Table load: 40 t Year of manufacture: 2002 Paintwork: RAL 7021 (black grey), RAL 7035 (light grey), Lodpfx Ahoyu Sznjuorn ref F-38 (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Big Plus Drawbar: DIN 69872 Form A Main drive: Drive type: SIEMENS main spindle motor with a 2-stage oil-cooled ZF gearbox Drive power: 100% duty cycle 53 kW (S1) Spindle speed range: Spindle speed: 20–4,000 rpm Max. torque: At S1 – 100% duty cycle: 1,531 Nm Max. feed force (X, Y, and Z axes): 31,000 N Max. rapid traverse speed (X, Y, and Z axes): 25,000 mm/min STANDARD EQUIPMENT OF THE MACHINE: Heidenhain CNC Control TNC640 High-performance orthogonal milling head Automatic tool changer (80 positions) Floor discharge chip conveyor Coolant system with 20 bar & through-spindle coolant (IKZ) DYNAMICS ACTIVE STABILIZER+ “DAS+ SYSTEM” Cross-axis compensation Automatic milling head change system Operator platform Camera for work area monitoring Pendulum machining package ACCURA HEADS Optimized Contour Milling (OCM) RepairFIT is our proven solution for a profitable entry into our product range. Machines offered in this line are acquired by us through a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 4.486 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.360 mm, pomik po osi Z: 1.500 mm, največja hitrost vrtenja: 18.000 obr/min, model krmilnika: Fidia C20 mit Bedienteil HPX, La máquina se encuentra en funcionamiento completo y en muy buenas condiciones. Está desmontada, almacenada y disponible de inmediato. DETALLES TÉCNICOS Recorrido del eje X: 3.000 mm Recorrido del eje Y: 2.360 mm Recorrido del eje Z: 1.500 mm Ángulo de rotación eje A: 105° Ángulo de rotación eje C: 300° Superficie de sujeción: 5.000 mm x 2.000 mm Carga admisible sobre mesa: 15.000 kg/m² Distancia entre ranuras en T: 18H12 / 250 mm Velocidad de avance X, Y, Z ejes: 20 m/min Aceleración de ejes X, Y, Z: 1,5 m/s² Máx. velocidad del husillo: 18.000 rpm Par de giro: 90 Nm Portaherramientas: HSK 63A DETALLES DE LA MÁQUINA Lredoywgyrepfx Ahuon Potencia del husillo: 28 kW Potencia conectada: 40 kW Fusible principal: 80 A Horas de trabajo del husillo: 4.486 h Horas totales de la máquina: 146.161 h Dimensiones y peso Espacio requerido por la máquina con periféricos (L x A x H): 7.300 x 5.600 x 5.600 mm Peso de la máquina: 16.500 kg EQUIPAMIENTO Carcasa de 3 lados, sin conductos de extracción

Stanje: rabljeno, prevoženi kilometri: 294.000 km, moč: 265 kW (360,30 KM), prva registracija: 08/2015, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, vrsta prenosa: mehanski, emisijski razred: Euro 6, Oprema: ABS, Proizvajalec: Scania Model: P360 6x4 Hvidtved Larsen Flexline 312 Euro 6 Leto: 2015 Stanje: Zelo dobro Serijska številka: YS2P6X40002109655 Ref. št.: 468087 Datum registracije: Motor: DC9 360 KM: 360 Kilometri: 294000 Menjalnik: Ročni GRS905 Eurotip: Euro 6 Rezervoar za diesel: 1 Kapaciteta rezervoarja: 300 L Kamera za vzvratno vožnjo: ? Tip kabine: CP16L Radio: ? Bobnaste zavore: ? ABS: ? Motorna zavora: ? Dimenzije pnevmatik: 385/65R22.5 - 315/80R22.5 Preostala profil pnevmatik: 50-60 % Sprednje vzmetenje: Listnate vzmeti Zadnje vzmetenje: Listnate vzmeti Medosna razdalja: 4500 mm Orodjarna: ? Hidravlični sistem: ? Skupna masa: 26000 kg Nadgraditelj: Hvidtved Larsen Flexline 312 Kapaciteta cisterne: 12000 L Visokotlačna črpalka: Uraca KD 718G Visokotlačna kapaciteta: 390 l/min 140 bar Delovne ure visokotlačne črpalke: 950 Zvit boben: 1" - 200 m Navijalni boben: 3/4 - 50m / 1/2 - 60m Lrsdpfx Aey Ek Upehuon Vakuumska črpalka: CVS Vacustar W1600 Vakuumska kapaciteta: 26.667 l/min. Delovne ure vakuumske črpalke: 500 Sesalna kaseta: 5" dvig in dvojna teleskopska

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, S&F Vibrating Screen Machine | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screen area: 2.0 m² per mesh size Screen decks: 1 piece Mesh aperture size: - 1st screen deck: punched perforated plate, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine color: RAL 3000 Flame Red including: Modular Silo Type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Article No.: 406.4345 including extension feet L = 1,100 mm including hopper extension and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets - Charcoal - Waste wood Ledjy Aa Ugspfx Ahujrn - Bark vibrating screen | wood chip screen | vibrating screening machine | flat screen | oscillating screen | drum screen | screening machine for wood chips | CHP screening machine

Stanje: rabljeno, Leto izdelave: 2019, Overview This keg handling package consists of an M+F Keg Technik Monomat + RMT keg washer, a keg filling unit, and a large quantity of stainless steel kegs in various sizes, complemented by tap faucets. The system is suitable for small to medium-sized breweries, allowing for the cleaning and filling of kegs for beer distribution. The washer was manufactured in 2019 and offers a compact and efficient solution for keg processing. Lsdsy D Ertspfx Ahuern Technical Data Manufacturer of keg washer: M+F Keg Technik Model of keg washer: Monomat + RMT Year of manufacture: 2019 Performance: approx. 12 kegs/hour Keg filler: included (manufacturer unknown) System type: semi-automatic keg washing and filling system Equipment - Keg Technik Monomat + RMT keg washer - Keg filling unit (stand-alone device) - 195 x 30-liter stainless steel kegs (Type S/A) - 39 x 50-liter stainless steel kegs (Type S) - 22 x 20-liter stainless steel kegs (Type A) - 22 x 10-liter stainless steel kegs (Type S) - 10 x beer taps (various manufacturers)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 2.000 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 18.000 obr/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 38 Nm, skupna masa: 65.000 kg, Initial commissioning: 2012 Control: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (below floor) with T-slots 18H12 / 250mm 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, and Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power demand: 85 kVA Dimensions, weights Space required (machine only, without peripherals): approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment Lrodpfx Ahoyrdc Eouen - Opening doors on both sides - 10-station tool changer Optional at extra cost: - Wireless measuring probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Stanje: dober (rabljeno), max. working width: 2000 mm for sheets up to: 1 mm upper beam opening width: 70 mm adjustment of bending beam: 10 mm required space: 2300 x 600 x 1050 mm Lredpfo Ixynjx Ahuen

Stanje: rabljeno, KEG-naprava, proizvajalec M+F, tip: Micromat M 2/2, z eno postajo za notranje čiščenje in eno polnilno postajo, s posodo za čistilno sredstvo. Ledpfxjyzhvio Ahuorn

Stanje: generalkompletno obnovljen (rabljeno), Dear customers, we currently offer idler rollers as well as drive rollers for profile belt sanding machines from the brand F. Zimmermann. The rollers have been newly coated with a more durable material for improved longevity, then crowned ground and fitted with new bearings. Lrsdpfx Ahed S Eb Aeuen You will receive fully refurbished rollers in exchange for your defective rollers! The rollers are suitable for the following machine types: Zimmermann PS0, regardless of year of manufacture Zimmermann PS1, regardless of year of manufacture Zimmermann PS1/2, regardless of year of manufacture Zimmermann PS S, regardless of year of manufacture When placing orders, please always specify the machine type and indicate which rollers you need and in what quantity. All items are in stock and can be delivered at short notice. If you have any further questions, I am happy to assist you!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Initial commissioning: 2012 Control: Heidenhain iTNC 530 incl. HR 420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ±110° C-axis: ±300° Clamping Table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis Milling Head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 rpm Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blow air: external Linear Axis Drives Feed rate X, Y-axis: up to 50 m/min Lsdpfevy A Tnox Ahujrn Feed rate Z-axis: up to 30 m/min Axis acceleration X, Y, Z: up to 2.5 m/s² Connection Data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, Weight Space requirement incl. peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Additional Equipment - Coolant supply with belt filter system - 30-position chain tool changer - Work area enclosure - Chip conveyor, right side Optional for an additional charge: - BLUM laser Machine condition Fully functional, very good condition. Already dismantled and in storage.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 handwheel Lrjdpowywciefx Ahujn Machine hours Machine power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Drives linear axes Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration system - 50-position chain tool changer - Workspace enclosure - Chip conveyor - LTA emulsion mist extraction system Optional at extra charge: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition, and still under power for inspection! The photos are for illustration purposes and show a new machine of this type. Original photos will follow shortly!

Stanje: novo, Leto izdelave: 2026, Trough Conveyor Belt | Troughed Belt Conveyor | Conveyor Belt Demonstration machine Manufacturer: S&F GmbH Model: MFB-500/8 Belt width: 500 mm Axle distance (A-A): 8,000 mm Throughput capacity: approx. 30 - 40 m³/h (at 0° incline) Drive: Drum motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: Rubber steep-incline conveyor belt EP 250/2 2:1 with V-profile (32 mm) Machine weight: approx. 800 kg Machine color: RAL 6011 reseda green Lsdpfx Aoxk Tg Nshusrn Suitable for, among others, the following bulk materials: Potatoes, wood chips, sawdust and wood shavings, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cutoff pieces, and much more. Accessories (optional): Feed hopper (loading hopper), internal belt scraper, undercarriage, tow bar, steel support, electrical installation (plug switch 16 A) Trough conveyor belt | Troughed belt conveyor | Conveyor belt | Bulk material conveyor | Belt conveyor | Inclined conveyor belt

Leto izdelave: 2026, stanje: novo, Screening plant for loading wood pellets, semi-mobile Custom-built Screening capacity: 10 - 50 t/h (depending on configuration) Comprising: - Trough belt conveyor type TFB - Screening machine type ASM - Conveyor belt type MFB incl. magnetic separator - Loading fitting // MODULFLEX loader - Tubular screw conveyor (optional) - Deduster (optional) Lrodpfx Asiux Tfjhuen Functional description and operation: Pellets are fed into the trough belt conveyor (including hopper extension) using a wheel loader. The pellets then pass onto the vibration screening machine type ASM. The screening machine separates the pellets into two size fractions (pellets and dust). The screened pellets are loaded into the silo vehicle via a trough belt conveyor and loading equipment. Thanks to the integrated level sensor in the loading fitting, the unit shuts off automatically when the silo vehicle is sufficiently filled. The dust fractions are discharged by means of a screw conveyor. To minimize dust emissions, the screening unit can be equipped with an additional deduster type NE. The screening plant's capacity (depending on configuration) ranges from 10 to 50 t/h (70 m³/h) for wood pellets. Benefits: - High screening capacity - Precise separation efficiency - Low noise and low maintenance - Flexible application - Customized manufacturing Need more information? Contact us! We will be happy to advise you.

Leto izdelave: 2026, stanje: novo, Screening plant for wood chip screening Design: stationary or semi-mobile New production Lrodoin Ewljpfx Ahuon Screening capacity: approx. 20 - 40 m³/h (depending on model) Comprising: - Vibrating feeder bunker type AVB - Screening machine type ASM - Subframe / hook lift (optional) - Conveyor belt type MFB - Electrical installation Function and operation: The wood chips are loaded into the vibrating feeder bunker with a wheel loader. They are then fed onto the vibrating screening machine type ASM. The screening machine separates the wood chips into three size fractions (oversize, chips, dust). The discharge of the fractions is handled by conveyor belts. Depending on the model, the screening plant achieves a capacity of 20 to 40 m³/h for wood chips. Advantages: - High screening capacity - High separation precision - Low noise and low maintenance - Flexible application - Custom manufacturing Do you require further information? Contact us! We will be happy to advise you.

Stanje: novo, Leto izdelave: 2026, Trough conveyor belt | Troughed belt conveyor | Conveyor belt Demonstration machine Manufacturer: S&F GmbH Model: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0° incline) Drive: Helical geared motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tension drum: Drum diameter 220 mm with spindle tensioning station Belt: Rubber steep-angle conveyor belt EP 250/2 2:1 with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 fir green Suitable for, among others, the following bulk materials: Wood chips, sawdust and wood dust, biomass, wood pellets, charcoal, waste wood, bark, earth, humus, recycling material, trimmings, and much more. Accessories (optional): Feed hopper, belt scraper, chassis, drawbar, steel support, electrical installation (plug switch 16 A) Trough conveyor belt | Troughed belt conveyor | Conveyor belt | Bulk material conveyor | Belt conveyor | Inclined conveyor belt Ljdpfew Ad Rrsx Ahuorn