Demag / Abus / Konecranes Podkavelj / Žerjavni Kavelj / Kavelj - 53 Kosov nakup rabljenega (5.428)

Stanje: rabljeno, Električni verižno dvigalo, električni dvižni mehanizem, dvigalo ABUS tip GM 3 / 125.6-121 Tovarniška št. D639506/020, leto izdelave 1988 Nosilnost: 125 kg Dvig kavlja: 3,2 metra Hitrost dviganja: 6 m/min. Fina hitrost dviganja: 1,5 m/min. Razdalja od obesila do nakladalnega kavlja: 380 mm Dolžina kabla upravljalnega bobna: približno 2,2 metra 1 dvižna veriga = 125 kg Priključek na omrežje: 400 V, 50 Hz - Obesilno uho na vrhu dvigala - brez vozička Bsdpfx Aey Ra Dkecmolh Teža: 33 kg Dobro stanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, V ponudbi je enonosilni mostni žerjav. Razpon/dvižna višina: cca 12.500 mm/6.000 mm, nosilnost: 3.200 kg, dvižni mehanizem: električni vrvični vitel, dvižne hitrosti: dvo-stopenjske (fini dvig/glavni dvig), vožnja žerjava: frekvenčno krmiljena, upravljanje: talno upravljanje prek visečega upravljalnika. Teža: cca 2.200 kg, skupne mere (D/Š/V): cca 13.000 mm/1.100 mm/1.350 mm. Ogled možen po predhodnem dogovoru. Bljdpfey Tn Ipsx Acmsh

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Demag Ergotech 80-310 Compact Schließkraft: 80 Tonnen Baujahr: 1995 Holmenabstand: 400 x 400 mm Schneckendurchmesser: 40 mm Schussgewicht: 196 g Bjdowav Htspfx Acmolh

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, dvižna višina: 2.000 mm, nosilnost: 1.500 kg, Prodam vrtljiv žerjav z verižnim vitlom Demag, višina stebra je 286 cm, dolžina roke od vrtljivega čepa 320 cm. Bodpfx Aceymv T Somslh

Stanje: rabljeno, 2-speed electric motor with gearbox DEMAG type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase linear-rotor motor DEMAG Type: KBA 125 B Motor no. 3926599 Speed: 915 rpm Motor power: 4.7 kW Mains connection: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement in direct drive 1 unit three-phase linear-rotor motor DEMAG Type: KBA 80 A Motor no. 3926599 Speed: 1360 rpm Motor power: 0.83 kW Mains connection: 400 Volt, 50 Hz - Brake disconnects via armature thrust movement when driving - When stationary, the brake operates via the reduction gearbox on the motor - Output speed via the gearbox: 174 rpm Reduction gearbox DEMAG type FG 08B-B3-23-H1-F1 Gearbox no. 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor rotor: Ø 32 mm Shaft stub length: 80 mm Pilot diameter on motor: Ø 125 mm Bolt circle diameter on motor: Ø 150 mm / 4xM12 internal thread Dimensions LxWxH: 1100 x 430 x 300 mm Bledpfx Ajy N D E Ascmsh Weight: approx. 160 kg Good condition

Stanje: zelo dobro (rabljeno), DEMAG verižni dvigalo Tip PK 2 N-F Dvižne hitrosti: 10 in 2,5 m/min 380 V 0,5 kW Pogon vozička: Blsdpfx Ajy Sldlscmjh 380 V 0,5 kW

Stanje: rabljeno, Leto izdelave: 1978, Doseg 5.500 mm Nosilnost 250 kg Višina 3.800 mm Dvižna višina 3.800 mm Številka žerjava 1.30 Tehnični podatki so podatki proizvajalca ali upravljavca in so za nas nezavezujoči. Pridržujemo si pravico do predhodne prodaje; izključno veljajo naše poslovne in prodajne pogoje. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, žerjavna zmogljivost 70 t Bedpjyqvliefx Acmelh več kot 10.000 kosov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali svoje podjetje, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Ekipa Markus Hirsch

Stanje: rabljeno, prevoženi kilometri: 221.291 km, Leto izdelave: 2009, obratovalne ure: 15.356 h, Pogon: kolesni Blsdewwqbyjpfx Acmsh Lastna teža: 22.000 kg Dvižna zmogljivost: 30.000 kg Dimenzije tovornega prostora: 830 x 240 x 345 cm Serijska številka: 86584 Stanje sprednjih pnevmatik: 70 Stanje zadnjih pnevmatik: 70 Za dodatne informacije se obrnite na skupino PFEIFER GROUP.

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Namen uporabe: Gradbeništvo Pogon: Kolesa Bedswk T Uiepfx Acmjlh Lastna teža: 48.000 kg Dvižna zmogljivost: 220.000 kg Serijska številka: 82609 Stanje prednjih pnevmatik: 90 Stanje zadnjih pnevmatik: 90 Transportne mere (D x Š x V): 15,3x3x4 Za več informacij kontaktirajte PFEIFER GROUP.

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Unladen weight: 48,000 kg Blodpfewk Aw Hsx Acmoh Lifting capacity: 220,000 kg Serial number: 82609 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Please contact PFEIFER GROUP for further information.

Stanje: skoraj kot novo (rabljeno), Kot nov z veliko dodatne opreme. Bljdpfx Acexga Sqsmeh

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, obratovalne ure: 13.049 h, nosilnost: 20.000 kg, dvižna višina: 4.000 mm, vrsta goriva: dizel, tip droga: simpleks, gradbena višina: 3.900 mm, širina nosilnega okvirja vilic: 3.300 mm, dolžina vilic: 2.400 mm, lastna masa: 36.400 kg, skupna dolžina: 5.900 mm, vrsta pogona: Diesel, gradbena širina: 3.300 mm, Diesel forklift Load center: 1200 mm Fork width: 200 mm Fork thickness: 110 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 14.00-24 Rear tires type: Superelastic Rear tires size: 14.00-24 Bsdey Sixaepfx Acmolh Description: In addition to this SMV model, we have around 200 heavy-duty forklifts, compact forklifts, standard forklifts & sideloaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing & financing at attractive terms are always possible for us. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice on this SL20-1200A. P.S.: Our certified forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. If desired, we can also sell your vehicle on consignment. Side shifter, fork positioner, Heater, full cabin,

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18622 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping Unit Bsdpsy Ub D Tjfx Acmslh Clamping force: 100 t Opening stroke: 380 mm Tie bar distance (h x v): 470 x 420 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 35 mm Shot volume: 115 cm³ Shot weight (PS): 103 g Injection pressure: 1600 bar Dimensions and Weights Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Weight: 5,500 kg Additional Information & Extras Core pull: 1 unit Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the category of high-precision, all-electric injection moulding machines, developed specifically for technical plastic parts, automotive applications, electronic components, and demanding serial production. All main machine movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements as well as ejector functions are fully electric, ensuring highest precision, excellent repeatability, and maximum process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approx. 60% up to 80% can be achieved depending on the application. At the same time, the reduced heat generation lowers the cooling demand and reduces overall operating costs. The machine features a direct servo injection and metering system, enabling very short response times and highly precise injection control. The injection unit is equipped with 4 heating zones, providing homogeneous plastification and stable process conditions, especially for technical plastics. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed serial production Thanks to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series is still among the most sought-after all-electric injection moulding machines on the market.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18621 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping unit Clamping force: 100 t Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight PS: 103 g Injection pressure: 1600 bar Dimensions and weight Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information: The Sumitomo (SHI) Demag IntElect series is among the highly precise, all-electric injection moulding machines, specifically developed for technical plastic components, automotive applications, electronic parts, and demanding high-volume production runs. All main machine movements are driven by direct-drive servo-electric motors. Injection, dosing, mould movement, and ejector functions are carried out entirely electrically, enabling maximum precision, excellent repeatability, and optimal process stability. The IntElect series is particularly noted for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. Lower heat generation simultaneously reduces cooling requirements and overall operating costs. Bjdpfx Acey Ub D Hemjlh The machine is equipped with a direct servo injection and dosing system, which allows very fast response times and provides highly precise injection control. The injection unit comes with 4 heating zones for homogeneous plasticising and stable process conditions, especially when processing technical plastics. Key benefits of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast, high-volume production runs Thanks to their long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18619 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping Unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar distance (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight (PS): 76 g Injection pressure: 2,180 bar Dimensions and Weight Machine dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional Information: The Sumitomo (SHI) Demag IntElect series comprises high-precision, all-electric injection moulding machines specifically designed for technical plastic components, automotive applications, electronic parts, and demanding mass-production runs. All major machine movements are powered by direct-drive servo electric motors. Injection, dosing, mould movements, and ejector operations are executed fully electrically, allowing for maximum precision, outstanding repeatability, and optimum process stability. The IntElect series is especially valued for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. At the same time, the minimal heat generation reduces cooling requirements and overall operating costs. The machine is equipped with a direct servo-driven injection and dosing system, enabling extremely fast response times and highly precise injection control. The injection unit features four heating zones, ensuring homogeneous plasticizing and stable process conditions, particularly with technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation Bedpfoy Ub Dtjx Acmelh * High dynamic servo performance * Minimal maintenance requirements * Clean production environment * Ideal for technical and precision parts * Suitable for high-speed series production Due to their long service life, stable production performance, and high energy efficiency, Sumitomo Demag IntElect machines remain among the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2012, Ref. No.: 18610 Manufacturer: DEMAG Model: IntElect 160/520-340 NC5 All Electric Year of manufacture: 2012 Clamping Unit Clamping force: 160 t Opening stroke: 495 mm Tie bar spacing (h x v): 520 x 520 mm Min. mould height: 275 mm Max. mould height: 585 mm Platen size (h x v): 760 x 785 mm Injection Unit Screw diameter: 35 mm Injection volume: 156 cm³ Shot weight (PS): 139 g Injection pressure: 2180 bar Dimensions and Weights Dimensions LxWxH: 5.4 x 1.5 x 2.1 m Machine weight: 7,600 kg Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the range of high-precision all-electric injection moulding machines, specifically developed for technical plastic parts, automotive applications, electronic components as well as demanding series production. All primary machine movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements, and ejection functions are executed fully electrically, ensuring maximum precision, excellent repeatability, and optimal process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved depending on the application. At the same time, reduced heat generation lowers cooling requirements and cuts overall operating costs. The machine features a direct servo injection and dosing system, allowing for extremely fast response times and highly precise injection control. The injection unit is equipped with 4 heating zones, ensuring homogeneous plasticizing and stable process conditions, especially for technical plastics. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption Bljdpfx Aey Ub Dmjcmsh * High precision and process repeatability * Quiet and low-vibration operation * Highly dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed series production Due to its long service life, stable production performance and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, vpenjalna sila: 3.000 kN, skupna masa: 13.900 kg, Ta 5-osni DEMAG ERGOTECH CONCEPT 3000-1450 je bila izdelana leta 2001. Ima zapiralno silo 3000 kN in maso stroja 13,9 ton. Z maksimalnim hidravličnim tlakom 190 bar in pretokom 164 l/min je ta stroj zasnovan za učinkovito delovanje. Če iščete visokokakovosten brizgalni stroj, razmislite o hidravličnem brizgalnem stroju DEMAG ERGOTECH CONCEPT 3000-1450, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. Bledpfx Ajy Icikjcmoh • Maks. hidravlični tlak: 190 bar • Maks. pretok: 164 l/min • Skupni tok: 181 A • Tok ogrevanja: 102 A • Pogonski tok: 79 A • Krmilni tok: 67 A • Obratovalna napetost: 400 V • Frekvenca: 50 Hz • Certifikat: CE

Stanje: dober (rabljeno), Leto izdelave: 2005, Zapiralna sila: 200 t Premer vijaka: 50 mm Premer vijaka 2: 22 mm Razdalja med stebri V: 580 mm Bedpfxoyz Tmye Acmslh Razdalja med stebri H: 580 mm Tip: Večkomponentni (2K vbrizgavanje) Pogon: Hidravlični 2x hidravlični ventil

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, nosilnost: 125 kg, globina grla: 6.000 mm, Naprodaj je galgenski žerjav znamke Demag (Demag Cranes & Components GmbH), tip D-AS270. Žerjav je popolnoma funkcionalen in takoj pripravljen za uporabo. Tehnični podatki: Leto izdelave: 07/2003 Nosilnost: 125 kg Izpust: 6 m Kot vrtenja: 270 ° Po želji se lahko organizira transport in nakladanje za doplačilo, po vsej Evropi. Blsdpfey Dqmpsx Acmsh Cene so navedene brez DDV. Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam z veseljem pomaga. Možen je tudi odkup ali menjava! Odkup / prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV TER OSTALO. Potrebujete kakovosten, a cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali pa želite svojega prodati? Za več informacij ali kontakt nas obiščite na naši spletni strani.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, številka stroja/vozila: 110-014358, skupna dolžina: 6.000 mm, skupna širina: 2.240 mm, nosilnost: 12.500 kg, delovna višina: 6.000 mm, Abus 12.500 KG enojni mostni žerjav v zelo dobrem stanju. - Razpon: 5740 mm med središči - Dvižna zmogljivost: 12.500 KG - Dvižna višina: 6 m - Leto izdelave: 2011 - Žično upravljanje Dostava, izdelava po meri, postavitev, preizkus in zagon so možni po dogovoru. Bljdpfxsy Uwube Acmsh Ni ta žerjav tisto, kar iščete? Na zalogi imamo več kot 100 žerjavov in +3.000 m² rezervnih delov. Ni vsa zaloga prikazana na spletu. Pokličite ali pišite nam, če imate vprašanja. Prodajamo med drugim: - Mostne žerjave - Podviseče žerjave - Stolpne in vrtljive žerjave - Verižne dvigalke - Demag KBK tirnice in dodatke - Dolžinske napajalnike Ključne besede: mostni žerjav, dvoranski žerjav, Abus, Demag, Kone, Konecranes, Stahl

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, nosilnost: 6.300 kg, For sale is an as-new Konecranes indoor crane system. The crane is a type CXTS (single girder bridge crane / profile girder) and is in excellent condition. Bsdpfeykbimsx Acmelh PLEASE NOTE: The crane shown in the listing images has unfortunately already been sold. However, an identical crane is available, but will only be available at the end of 2026. TECHNICAL DETAILS - Lifting capacity: 6,300 kg - Span: 18,600 mm - Lifting height: 6.00 m - Year of manufacture: 2020 - Lifting speed: 4.0 / 0.7 m/min (2-stage) - Trolley travel speed: 20.0 m/min (infinitely variable) - Crane travel speed: 32.0 m/min (infinitely variable) MACHINE DETAILS - Weights: Trolley weight: 440 kg; Crane weight without trolley: 1,832 kg - Classification: Crane class: S3 (DIN 15018); Hoist mechanism group: FEM 2m (ISO M5), Crane drive group: FEM 1Am (ISO M4) - Electrical data: Power supply: 400 V / 48 V / 50 Hz, Rated power: 4.9 kW EQUIPMENT - Radio remote control with push-button transmitter - Additional movable control unit (emergency control) - Overload protection and load spectrum recorder - Approach and end limit switches for crane and trolley travel - Signal horn, charging station, and spare battery - Hook collision protection Transport dimensions of the bridge: - Total length: 19,328 mm - Profile height of the girder: 622 mm - End carriage width (wheelbase): 2,200 mm Transport and loading can be organised Europe-wide for an additional charge if required. Prices are plus VAT. Inspection is possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2000, Overview This complete hot-fill line for still beverages/juices was custom-assembled by the previous operator and operated reliably until the end. The line is designed for the preparation, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes systems for thermal pre-treatment, filling, post-cooling, and final packaging. The line is still installed and can be inspected on site at any time. Technical Data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 l / 1.0 l / 0.5 l / 1.5 l Application: Hot filling of juice and still beverages Configuration: Heating/pasteurization system (based on a plate heat exchanger) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and closing machine Utilities: Compressed air, power supply Scope of Delivery Depalletizing crane system | DEMAG | Manual depalletizing of layers with air-cushion gripper system Bottle rinser | FIMER | Rotary rinser with conveyor system Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot filling Cooling system | 3-zone cooling tunnel with spray system Plate heat exchanger | GEA | Integrated cooling circuit Supply tank | Speidel | Atmospheric tank Pasteurization system | API Schmidt-Bretten | Plate heat exchanger-based heating system Carton erecting unit | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton erecting unit Carton sealing machine | BORTOLIN | Hot melt carton sealing Adhesive application system | Nordson | Series 3400 | Hot melt system Conveyor systems | Various transport conveyors Bedpjy Rmfbefx Acmelh

Stanje: zelo dobro (rabljeno), skupna masa: 20.000 kg, Mostno dvigalo ABUS - ZLK MACH-ID 9495 Bsdpjy D Slgofx Acmjlh Proizvajalec: ABUS Tip: ZLK Leto izdelave: 2002 Prosimo, upoštevajte: Podatki na tej strani so bili po najboljšem vedenju in prepričanju pridobljeni od nas in, če je bilo mogoče, od proizvajalca. Informacije so podane v dobri veri, vendar njihova natančnost ni zagotovljena. Zato ne predstavljajo jamstva ali pogodbenih pogojev. Priporočamo vam, da preverite vse pomembne podrobnosti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Mostno dvigalo ABUS - ELK MACH-ID 9496 Proizvajalec: ABUS Tip: ELK Leto izdelave: 2012 Prosimo, upoštevajte: Podatki na tej strani so bili zbrani po naših najboljših močeh in, če je bilo mogoče, s strani proizvajalca. Podatki so posredovani v dobri veri, vendar točnosti ni mogoče zagotoviti. Zato ne predstavljajo ponudbe ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti. Blodpfxsy Ec Ets Acmeh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, skupna masa: 500 kg, skupna dolžina: 4.250 mm, Mostno dvigalo ABUS - VS 0,5t x 4250 ID stroja: 9309 Proizvajalec: ABUS Tip: VS 0,5t x 4250 Prosimo, upoštevajte: Informacije na tej strani so bile pripravljene po naših najboljših močeh in, če je bilo mogoče, pridobljene od proizvajalca. Informacije so podane v dobri veri, vendar njihova točnost ni zagotovljena. Zato le-te ne pomenijo zastopanja ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti. Bljdpfx Aex Di Txocmeh