Cronosstech H Tip 1200 Ton Enodelni Hidravlični Stiskalnik nakup rabljenega (70.562)

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 150 mm, premer stranskega valja: 130 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Mobile control panel - Centrally driven rolls powered by motor - Hydraulic up/down movement for rear and lower rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Lower and upper roll drive by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High-strength forged steel rolls made from certified SAE 1050 (CK45) steel - Hardened shafts - Digital readouts (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment Cedpfx Ajxw D Udof Djgu - Ejector system - Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Rolling Capacity: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 110 mm/s, višina mize: 955 mm, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 320 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promecam quick-release clamping system • Sliding front support system • Manual crowning system (Original WILA cam lock) • Narrow lower table (European type) • GIVI linear scales • Standard upper die (H:67, 850 R:08) • Standard lower die (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic tool clamping • WILA hydraulic upper and lower tool clamping • Wide lower table for multi-groove tools • Backgauge X distance 1000 mm • AKAS or DSP laser beam front safety system • Additional backgauge fingers • Additional backgauge support TECHNICAL SPECIFICATIONS VALUE Cgsdpjx Nn Eaefx Af Deu Bending Force (Ton) 320 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/sec) 150 Return Speed (mm/sec) 110 Pressing Speed (mm/sec) 10 Oil Tank (Liters) 290 Machine Weight (kg) 14,700 Main Motor (kW) 22 CNC Control Unit ESA S640 CNC Axis Count Y1-Y2-X-R (4 Axis) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam lock) Safety System Front laser safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roller opening head Movable control panel Centrally driven rollers powered by motor Hydraulically movable rear roller and lower roller (up/down) Accurate bending with braked main motor Codpfxew Slcte Af Dogu Conical bending and pre-bending system Lower and upper rollers driven by planetary gearbox Rear roller ball system for easier sheet movement Compliance with EU safety directives High-strength forged steel rollers made of SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 pcs) User manual OPTIONAL EQUIPMENT Overhead crane for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rollers Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375/1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 400 mm, premer zgornjega valja: 400 mm, premer stranskega valja: 300 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 30 mm, STANDARD EQUIPMENT * The top, bottom, and side rolls move up and down linearly via hydraulic cylinders attached to the machine frame * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent parts thanks to the hydraulically opening head and automatic lifting shaft * Highly user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * NC and CNC control for automation * Upper crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 20/25 mm Bending: 25/30 mm Top & Bottom Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Csdpfx Aow Sl T Sof Dogu Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, moč: 5 kW (6,80 KM), STANDARDNA OPREMA Varjeno ohišje iz jeklene konstrukcije Trije valji z motornim pogonom Iz posebnega visoko odpornega materiala, kaljeni in brušeni valji Horizontalni in vertikalni delovni položaj Kaljeni standardni valjčni koluti Ločena premična upravljalna plošča 3-smerne mehanske ročne stranske podpore Natančno upogibanje z motorjem z zavoro 2 digitalna prikazovalnika IZBIRNA OPREMA Valjčni koluti za krivljenje cevi in profilov Izbirne dvoosne hidravlične stranske podpore Avtomatizacija z NC krmiljenjem TEHNIČNE LASTNOSTI Premer zgornje gredi: 80 mm Cgsdpfxsw Smibj Af Dou Premer spodnje gredi: 70 mm Premer valjčnega kolesa: 245 mm Delovna hitrost: 7 m/min Moč motorja: 4,75 kW Dolžina: 1500 mm Širina: 1000 mm Višina: 1400 mm Teža: 1645 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 550 mm, premer zgornjega valja: 550 mm, premer stranskega valja: 450 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 70 kW (95,17 KM), trajanje garancije: 12 meseci, Oprema: kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * The bottom and side rolls are hydraulically operated with pistons attached to the frame, providing linear up-and-down movement * Protected against overload * The top and side rolls are driven by hydromotors and planetary gearboxes (three-roll motor drive) * The positions of the rolls are easily read with three digital indicators * Hydraulic opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts Cgsdpfxsxbzptj Af Dou * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending Thickness : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Stanje: novo, Leto izdelave: 2025, moč: 18,5 kW (25,15 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 140 mm/s, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 220 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R – 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European-type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam-type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H:67, 850 R:08) • Standard lower die (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Cgsdpfx Ajx Nnzbef Dou Optional Features • 4, 6, and 8-axis backgauge configurations starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping systems • Wide lower table for multi-way dies • Backgauge X travel: 1000 mm • AKAS or DSP laser-guided front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 220 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (Daylight) (mm) 515 Throat Depth (mm) 410 Table Height (mm) 940 Approach Speed (mm/s) 180 Return Speed (mm/s) 140 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 290 Machine Weight (kg) 11,300 Main Motor Power (kW) 18.5 CNC Control Unit ESA S640 CNC Axis Count Y1-Y2-X-R (4 Axis) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam-type) Safety System Laser front safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 130 mm/s, višina mize: 935 mm, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 175 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promecam quick-release die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge type) Cgodpex Nn U Ujfx Af Deu • Narrow bottom table (European type) • GIVI brand linear scales • Standard top punch (H: 67, 850 R:08) • Standard bottom die (60x60 mm, 4 channels V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic top and bottom die clamping • Wide bottom table for multi-channel tooling • Backgauge X-axis travel up to 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge stop TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 175 Bending Length (mm) 3100 Clearance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 515 Throat Depth (mm) 410 Table Height (mm) 935 Approach Speed (mm/s) 180 Return Speed (mm/s) 130 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 180 Machine Weight (kg) 9700 Main Motor Power (kW) 15 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge type) Safety System Laser front safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, delovna širina: 3.100 mm, kot rezanja (min.): 0,5 °, rezalni kot (maks.): 2 °, frekvenca hodov (min.): 15 obr/min, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap adjustment, stroke, and cutting angle adjustment Touchscreen CNC control unit (ELGO P40T) Cedjx Nqp Ispfx Af Degu Automatic adjustment of cutting angle according to material type and thickness Automatic stroke reduction for short sheet cutting (higher speed) CNC software infrastructure to reduce operator errors Heavy-duty steel construction frame subjected to stress-relieving process Hardened guides and roller-equipped upper beam movement system 1,000 mm CNC-controlled, motorized, and programmable backgauge Backgauge features: - Programmable retract function - Lift-up feature for long parts - ±0.1 mm positioning accuracy Ball transfer front support table Upper blade: 2 cutting edges / Lower blade: 4 cutting edges High-alloy steel blades Special linkage system minimizing maintenance requirements Front squaring arms with ruler, T-slots, and stops (1,000 mm) Cutting line illumination and shadow wire Front finger guard (retractable type) Front and side safety guards Foot pedal Movable control pendant Emergency stop buttons Safety equipment conforming to CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with forward feeding) Angle-adjustable front gauge (0–180°) Front squaring arms in custom lengths Full-length front finger guard (openable) Front finger safety light curtain Rear safety light barrier (CE compliant) Special blade options Laser cutting line indicator Oil heater or oil cooler Automatic or manual central lubrication system Electrical cabinet with air-conditioned cooling system CNC-controlled front sheet support and feed arms Custom throat depth (500 mm) Light-duty safety guards TECHNICAL SPECIFICATIONS (MODEL C 06 / 3100) Cutting capacity (450 N/mm²): 6 mm Cutting capacity (700 N/mm²): 4 mm Cutting length: 3,100 mm Cutting angle: 0.5° – 2° (CNC-controlled) Cutting stroke: Automatically adjustable Throat depth: 250 mm Backgauge stroke (X axis): 1,000 mm Cutting speed: 10 – 15 strokes/min Motor power: 10 kW Oil tank capacity: 200 liters Machine weight: ~6.7 tons Machine dimensions (LxWxH): approx. 4,830 x 2,995 x 1,975 mm

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 60 t, hod: 400 mm, širina mize: 700 mm, dolžina mize: 700 mm, razmak između stupova: 700 mm, sila umika: 20 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 60/20 TON FOUR-POST HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 60/20 ton four-post hydraulic deep drawing press is a robust and compact solution designed for precise metal forming, deep drawing, and spinning applications. The four-post construction ensures stable parallelism and perpendicularity tolerances are maintained throughout the pressing process. The frame is manufactured from St52 grade steel and undergoes stress relief treatment via vibration. The ram and blankholder systems are independently controllable; stroke and pressure adjustments can be set precisely via the touchscreen panel. Outfitted with REXROTH or PARKER brand hydraulic components, IE3 class motors, and an automatic lubrication system, it offers long-lasting, safe, and efficient operation. Operator errors are minimized with its PLC-controlled system. This model is an ideal solution for small and medium-scale spinning, deep drawing, die testing, and auxiliary pressing applications. Key Advantages - Rigid four-post press frame - Independent stroke and tonnage control for ram and blankholder - Adjustable system via touchscreen panel - High precision and repeatability - Low maintenance requirement, long service life Applications - Metal spinning operations - Deep drawing processes - Die testing and prototype productions - Metal processing and auxiliary production lines ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-Post FRAME MATERIAL: St52 – ERDEMİR POST DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 60 Ton CAPACITY (BLANKHOLDER): 20 Ton DISTANCE BETWEEN POSTS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 400 mm STROKE (BLANKHOLDER): 100 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 500 mm WELD STRESS RELIEF: Vibration stress relieving WELD APPLICATION: WPQR and WPS certified by TÜRK-AK, complies with EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/sec MOVING TABLE PRESSING SPEED: 12 mm/sec MOVING TABLE RETURN SPEED: 170 mm/sec BLANKHOLDER TABLE ADVANCE SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 175 mm – Ck45 BLANKHOLDER CYLINDER BORE: Ø 100 mm – Ck45 Cgodpfsx N Ulgex Af Dsu AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3100 mm APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm PRE-FILL VALVE: NG 100 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from screen) RAM/BLANKHOLDER STROKE & TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Displayed on screen DIE MEMORY: Adjustable via screen LINEAR SCALE: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 80 t, hod: 500 mm, širina mize: 700 mm, dolžina mize: 700 mm, razmak između stupova: 700 mm, sila umika: 30 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 80/30 Ton Four-Column Hydraulic Spinning Press General Description The CRONOSSTECH 80/30 ton four-column hydraulic spinning press is an industrial press solution designed for metal spinning, deep drawing, and die trial applications that require high precision. It features a rigid four-column body structure. The body is constructed from St52 grade steel, stress-relieved by vibration to ensure high parallelism and perpendicularity tolerances during pressing. The ram and die cushion systems operate independently; stroke and pressure settings can be precisely controlled from the operator panel. Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and PLC-controlled architecture, the press offers long life, safety, and energy efficiency. Maintenance requirements are minimized thanks to the automatic lubrication system and filter contamination alerts. This model is an ideal solution for small and medium batch production, die trials, and precision forming operations. Key Advantages - Rigid four-column press frame construction - Independent stroke and tonnage adjustment for ram and die cushion - Full control via touchscreen panel - High repeatability and accuracy - Low maintenance cost, long service life Application Areas - Metal spinning - Deep drawing operations - Die trials and prototype manufacturing - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs induction-hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 tons CAPACITY (DIE CUSHION): 30 tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 500 mm STROKE (DIE CUSHION): 150 mm MIN. DISTANCE BETWEEN TABLES: 100 mm MAX. DISTANCE BETWEEN TABLES: 600 mm STRESS RELIEVING: Vibration method WELDING APPLICATION: WPQR & WPS accredited by TÜRK-AK – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST APPROACH SPEED: 150 mm/sec MOVABLE TABLE SPINNING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec DIE CUSHION TABLE ADVANCE SPEED: 30 mm/sec MAIN CYLINDER BORE DIAMETER: Ø 200 mm – Ck45 DIE CUSHION CYLINDER BORE DIAMETER: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units Cgjdpfox N Ultsx Af Dsu APPROXIMATE MACHINE HEIGHT: 3300 mm APPROXIMATE MACHINE WIDTH: 1050 mm APPROXIMATE MACHINE DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1100 mm MAIN FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (Adjustable via screen) RAM / DIE CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Viewable via screen DIE MEMORY: Adjustable via screen LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 tons

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Highly suitable for bending round and various diameter materials Cgedpow Slxzsfx Af Dju Lower roll and side rolls move hydraulically up and down in direct linear motion Protected against overloading The top roll is driven by an electric motor and planetary gearbox. The lower roll is driven by a cardan coupling system. Two rolls are driven The positions of the rolls are easily read with three digital displays The piece can be easily removed thanks to the hydraulically opening head Very easy operation with the mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety regulations and bears the CE mark Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) for support during large diameter bending Hydraulic side supports for support during large diameter bending Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, dolžina valja: 4.100 mm, najv. debelina pločevine: 25 mm, moč: 38,5 kW (52,35 KM), STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down by pistons hydraulically attached to the frame * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * The positions of the rolls are easily readable via three digital displays * The hydraulically opening head and the automatically lifting shaft make it easy to remove the bent piece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK50) induction-hardened, forged, or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) Codpfew Sl I Nex Af Djgu * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Top crane (elevator) for support in large diameter bending * Hydraulic side supports for support in large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-Bending Thickness : 16/20 mm Bending Thickness : 20/25 mm Top & Bottom Roll : 460 mm Side Roll : 380 mm Motor Power : 38.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2300 mm Height : 2350 mm Weight : 29500 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 25 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Roll positions can be easily read with three digital readouts * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual speed operation system Cgedsw Smb Ropfx Af Dju OPTIONAL EQUIPMENT * NC and CNC automation control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length : 2550 mm Pre-bending : 16/20 mm Bending : 20-25 mm Upper & Lower Roll : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 4850 mm Width : 1900 mm Height : 1950 mm Weight : 12800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 280 mm, premer zgornjega valja: 280 mm, premer stranskega valja: 220 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 16 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move vertically via pistons hydraulically connected to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary gearbox (3 rolls motor-driven) * Roll positions are easily read with three digital displays * The hydraulically opening head and automatic rising shaft allow the workpiece to be easily removed * Easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) support for large-diameter bending Cgsdpew Smfcefx Af Deu * Hydraulic side supports for large-diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed control system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll Diameter: 280 mm Side Roll Diameter: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, moč: 8 kW (10,88 KM), STANDARDNA OPREMA Varjeno jekleno ohišje Trije valji z motornim pogonom Osi iz posebenega visokotrdnega materiala, termično obdelane in brušene Vodoravni in navpični delovni položaj Kaljeni standardni valjčni elementi Ločena premična upravljalna plošča Mehanski ročni stranski nasloni, premični v 3 smereh Cgodpfx Aew Smi Iof Deu Natančno krivljenje z motorjem z zavoro Dva digitalna prikazovalnika IZBIRNA OPREMA Valjčni elementi za krivljenje cevi in profilov Opcijski dvoosni hidravlični stranski nasloni Avtomatizacija z NC-krmiljenjem TEHNIČNE KARAKTERISTIKE Premer valjev: 100 mm Premer valjčnih elementov: 315 mm Delovna hitrost: 7 m/min Moč motorja: 7,5 kW Dolžina: 2000 mm Širina: 1450 mm Višina: 1700 mm Teža: 3650 kg

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 110 mm/s, višina mize: 955 mm, globina grla: 410 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 320 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) Cgodpex Nn I Uefx Af Dsu • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-groove dies • Rear gauge X travel 1000 mm • AKAS or DSP front safety system with laser beam • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATION VALUE Bending Force (Ton) 320 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/s) 150 Return Speed (mm/s) 110 Pressing Speed (mm/s) 10 Oil Tank (L) 290 Machine Weight (kg) 16800 Main Motor (kW) 22 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam type) Safety System Front laser safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, delovna širina: 3.100 mm, kot rezanja (min.): 0,5 °, rezalni kot (maks.): 3 °, frekvenca hodov (min.): 13 obr/min, najv. debelina pločevine: 10 mm, najv. debelina jeklene pločevine: 10 mm, Standard Features • ELGO P40T Touch NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade clearance, stroke, and blade angle adjustment • 1,000 mm NC-controlled, programmable, motorized backgauge • 250 mm throat depth • Programmable backgauge retract function • Backgauge lifting function for parts longer than 1,000 mm • Adjustable cutting length from the control panel to increase the number of cuts in short sheet cutting Csdpfx Aox Npddof Djgu • Ball transfer sheet support table • Upper blade with 2 cutting edges / Lower blade with 4 cutting edges • Special pivot system reducing maintenance requirements • 1,000 mm front support arms, with ruler, T-slots and stoppers • Front and side safety guards • Cutting line illumination and shadow wire • 1,000 mm front finger guard with openable cover • Foot pedal • Movable control arm and safety enclosures • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with front delivery (Type 2) • Adjustable angle square 0-180º • Front support arms at required lengths • Special throat depth 500 mm • Full-length openable front finger guard • Front finger safety light curtain • Special blade • Laser cutting line • Oil heater or oil cooler • Automatic or manual central lubrication • Electrical cabinet with air conditioning • CNC front sheet support arms • Rear light barrier complying with CE standards • Light type safety guard TECHNICAL SPECIFICATIONS VALUE Cutting Capacity (450 N/mm²) 10 mm Cutting Capacity (700 N/mm²) 6 mm Cutting Length 3100 mm Cutting Angle 0.5 – 3° Cutting Speed / Fast Mode 7 / 13 spm Throat Depth 250 mm Backgauge Travel (X) 1000 mm Table Length 3600 mm Table Width 880 mm Motor Power 22 kW Weight 10.5 Tons

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, hod: 600 mm, širina mize: 800 mm, dolžina mize: 800 mm, razmak između stupova: 800 mm, sila umika: 40 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 100/40 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 100/40 ton four-column hydraulic drawing press is an industrial press solution with a four-column rigid frame, designed for metal forming, deep drawing, and precision pressing applications. The St52 grade steel construction frame undergoes stress relief via vibration. This structure ensures long-term preservation of high parallelism and perpendicularity tolerances. Ram and blank holder (pot) systems operate independently; stroke and pressure settings can be precisely controlled via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motors, and a PLC-controlled system, it delivers high efficiency, reliability, and long service life. The automatic lubrication system and electronic filter contamination alerts reduce maintenance requirements to a minimum. This model is an ideal solution for medium-scale serial production, die testing, and precision forming applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touchscreen panel - High precision and repeatability - Low maintenance cost and long service life Areas of Application - Metal forming operations - Deep drawing applications - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL FEATURES TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø90 – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARINGS: Bronze Zr14 CAPACITY (RAM): 100 Ton CAPACITY (POT/BLANK HOLDER): 40 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm Cgjdpfex N Ulysx Af Deu PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (POT): 200 mm MIN. DAYLIGHT OPENING: 100 mm MAX. DAYLIGHT OPENING: 700 mm WELDING STRESS RELIEF: Vibratory WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/s MOVING TABLE FORMING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s POT TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø230 mm – Ck45 POT CYLINDER BORE: Ø145 mm – Ck45 AUXILIARY BOOSTER CYLINDERS: 2 units APPROX. PRESS HEIGHT: 3500 mm APPROX. PRESS WIDTH: 1150 mm APPROX. PRESS DEPTH: 1150 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1200 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION: Automatic (configurable from screen) RAM / POT STROKE & TONNAGE ADJUSTMENT: Configurable from screen SYSTEM & PRESS STATUS DISPLAY: Viewable on screen DIE MEMORY: Configurable from screen LINEAR SCALE: NOVATECHNIK or TURCK PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up and down movement for rear roll and lower roll Precision bending with braked main motor Conical bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear Roll Ball System for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 units) Operating manual OPTIONAL EQUIPMENT Top crane (hoist) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Cgsdpfx Afsw Slcge Dju Hydraulic motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. bending diameter: 375 / 1250 mm Motor power: 7.5 + 1.5 kW Bending speed: 5 m/min Tank capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 320 mm, premer zgornjega valja: 320 mm, premer stranskega valja: 240 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT * The lower, upper, and side rolls move up and down linearly via pistons attached to the body hydraulically * Protected against overload * The upper and side rolls are driven by hydromotors with planetary gearboxes (all three rolls are motor-driven) * Easy roll position reading with three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and automatically lifting shaft * User-friendly with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts Cgsdpjxw Eblofx Af Dou * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Upper & Lower Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Height : 1950 mm Weight : 10,500 kg

Stanje: novo, Leto izdelave: 2025, moč: 18,5 kW (25,15 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 140 mm/s, višina mize: 965 mm, globina grla: 410 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 220 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, STANDARD FEATURES CNC-controlled hydraulic press brake Y1 – Y2 – X – R axes CNC controlled (4 axes) CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display) Offline PC programming capability Stress-relieved, heavy-duty steel frame CNC-controlled synchronized cylinder system 310 mm stroke 410 mm throat depth ±0.03 mm precision servo motorized backgauge Backgauge travel distances: X axis: 750 mm R axis: 250 mm Backgauge system with ball screws and linear guides Sliding type front support arms Manual crowning system (wedge type) European-style narrow bottom table European-style quick upper tool clamping system (Promecam type) High-precision linear scales Standard upper tool (H: 67 mm – 85° – R: 0.8) Standard lower die (60×60 mm – 4-groove V: 16 / 22 / 35 / 50 mm) Laser front safety system LED lighting Foot pedal Emergency stop buttons Safety equipment compliant with CE standards OPTIONAL FEATURES Backgauge systems with 4 / 6 / 8 axes starting from X + R Extension of backgauge X axis distance to 1000 mm Additional backgauge fingers Hydraulic upper and lower tool clamping systems Motorized crowning system Wide bottom table for multi-groove dies Front safety laser system (AKAS or DSP) Rear safety light barrier CNC-controlled sheet metal front support systems Automatic angle measurement system Oil cooler or oil heater Electrical cabinet air conditioning cooling system Deep throat option Csdpfx Ajx Nqqrof Dogu TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL) Bending force: 220 tons Bending length: 4100 mm Distance between side frames: 3600 mm Stroke: 310 mm Open height (daylight): 515 mm Throat depth: 410 mm Table height: 965 mm Backgauge axes: X = 750 mm / R = 250 mm Approach speed: 180 mm/s Working speed: 140 mm/s Return speed: 10 mm/s Main motor power: 18.5 kW Oil tank capacity: 290 liters Machine weight: ~13,650 kg Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotor and planetary gearbox * Easy removal of bent parts thanks to hydraulically opening head * Very easy operation with movable control panel * Position of the lower rolls easily readable via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of rolls * Extended shaft ends for mounting profile/tube bending rolls OPTIONAL EQUIPMENT * Upper crane (lift) for support during large-diameter bending * Hydraulic side supports for large-diameter bending * Ground and polished rolls for special applications * Section bending rolls for profile bending * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of rolls TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Rolling/Bending: 16/18 mm Upper & Lower Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Cgjdpfjw Slf Uox Af Dou Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, moč: 4 kW (5,44 KM), STANDARDNA OPREMA Varjeno jekleno ohišje Trije valji z motornim pogonom Osi iz posebnega visoko trdnega, kaljenega in brušenega materiala Vodoravni in navpični delovni položaj Standardni kaljeni valji Ločena premična upravljalna plošča Mehanski ročni bočni omejevalniki v 3 smereh Natančno krivljenje z zavoro na motorju 2 digitalna prikazovalnika OPCIJSKA OPREMA Valji za krivljenje cevi in profilov Dvodimenzionalni hidravlični bočni omejevalniki po izbiri Cgodpew Smhwjfx Af Dou Avtomatizacija z NC krmilnikom TEHNIČNE SPECIFIKACIJE Premer zgornje osi: 60 mm Premer spodnje osi: 50 mm Premer valja: 180 mm Delovna hitrost: 6 m/min Moč motorja: 3,75 kW Dolžina: 1200 mm Širina: 850 mm Višina: 1200 mm Teža: 955 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 38,5 kW (52,35 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * The lower, bottom, and side rolls move linearly up and down via body-mounted hydraulic pistons * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * Roll positions are easily readable via three digital indicators * Rolled parts are easily removed due to hydraulically opening head and automatic lifting shaft * Very user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts Cjdsxd S T Uspfx Af Dogu * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top support crane (elevator) for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic plate ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Top & Bottom Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19800 kg