Cronosstech 150/50 Ton Stolpni Tip Hidravličnega Glodenja nakup rabljenega (54.042)

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: G40_2, Funkcionalnost: popolnoma funkcionalen, Electric Press Brake G40 CoastOne - Made in Finland Pressing force: 1500 kN Bending screws: 6 Kedsy A Nlbjpfx Aqqelt Controlled axes: X-R axis (2x manual backgauge fingers) Standard Type A / R1 / AMADA / Promecam press brake tool clamping system Control: TC15-2D graphic touchscreen Optional features: - 4 or 5-axis backgauge system - Lazersafe light curtain system (standard) - Lazersafe IRIS light curtain system - Lazersafe IRIS+ light curtain angle measurement system - Extra monitor with 3D bending software - Support table - Lighting at front and rear - WILA / Trumpf / Type B - tool clamping system - 2x bending aids 36 months warranty after installation

Stanje: novo, Leto izdelave: 2025, skupna masa: 230 kg, kapaciteta rezervoarja za vodo: 110 l, Workshop cabin washing system, constructed from AISI 304 stainless steel and acid-resistant AISI 316 steel, designed for professional use across various industries and the automotive sector. It is used to remove heavy contamination without damaging the surface of the cleaned component. The system operates in a closed circuit at temperatures up to 45°C. The worktop width is 150 cm. The washer is equipped with a 110-liter tank, which can optionally be thermally insulated to prevent the heated liquid from cooling too quickly. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, in combination with the right temperature and nozzle pressure from the spray gun, effortlessly removes all types of dirt. Standard features include a high-pressure lance up to 140 bar, an air gun, and a low-pressure overflow brush. The wash cabin is pneumatically lifted, with adjustable height, bright lighting, and air ventilation for the viewing window to ensure comfortable operation. The construction and design of the Master Cleaner MC 1500 meet the highest quality standards according to ISO 9001 and environmental standards according to ISO 14001. Ideal for removing contaminants from steel, cast iron, and aluminum surfaces. The Master Cleaner MC1500 is equipped with a special oil separator that effectively removes oil contamination from the water in the washer’s tank. STANDARD FEATURES: - High-pressure nozzle: 140 bar - Low-pressure brush: up to 5 L/min - Air gun: up to 8 bar - Air ventilation for viewing window - LED lighting - Pneumatic mechanism for opening the cabin - Heated 110-liter tank - Dual fluid filtration - Oil separator - Sensors for liquid level and temperature - Adjustable feet: up to 100 mm - Double footswitch - XPOWER Active Cleaner (5-liter starter pack) OPTIONAL FEATURES: - Rotating basket - Spray arm - Rotating nozzle - Nozzle for manifold cleaning - Thermal insulation for the tank TECHNICAL SPECIFICATIONS: - Weight: 230 kg - External dimensions – Open cabin (W x D x H): 175 x 85 x 235 cm - External dimensions – Closed cabin (W x D x H): 175 x 85 x 170 cm - Cabin dimensions (W x D x H): 150 x 64 x 65 cm - Heated fluid tank: 110 liters - Operating temperature: up to 45°C - Power supply: 3 x 400 V - Pneumatic supply: 6 – 8 bar - Maximum power: 7.5 kW - Pump operating pressure: 140 bar - Dual fluid filtration: Yes - High-pressure lance capacity: up to 15 L/min - Air connection: Pneumatic quick connector DN7.2 plug - Manual washing with overflow brush: up to 5 L/min - Double footswitch: Yes - Safety features: Temperature sensor, emergency stop switch, limit switch - Protection class: IP 54 - Declaration of conformity: CE MULTIPLE MODELS AVAILABLE – CONTACT US FOR MORE INFORMATION. Kljdpfxsri Rn Uj Aqqjt

Stanje: rabljeno, Leto izdelave: 1980, Premer struženja nad ležiščem: 530 mm Premer struženja nad suportom: 300 mm Dolžina struženja: 1550 mm Klodpfx Aqjw Rf H Neqot Vretensko izvrtina: 78 mm Vrtljaji vretena: 22–1600 min⁻¹ Skupna priključna moč: 7,5 kW Teža stroja pribl.: 3 t Potrebni prostor pribl.: 3,2 x 1,2 x 1,4 m Z Multifix in vpenjalno glavo

Stanje: rabljeno, Pneumatic cylinder, air cylinder, standard cylinder, clamping cylinder -Martonair Type: 167-05 5000-1 -Piston diameter: Ø 63 mm -Piston rod diameter: Ø 20 mm Ksdpfxed Sti Aj Aqqjlt -Max. pressure: 16 bar -Stroke: 1150 mm -Dimensions: 75/75/1340 mm -Weight: 9.6 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 3.540 h, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 280 t, X max. working area: 3080 mm Y max. working area: 1540 mm Operating hours: 3540 h Control system: CNC control LABOD with graphics Standard equipment Hydraulic punching machine - Punching force: approx. 280 kN (28 tons) - Throat depth: approx. 1750 mm - Max. punching diameter: 70.0 mm - Max. stroke height: 90 mm, continuously programmable upwards and downwards via control system - Table width (left + right): 3430 mm each - Table depth: 3160 mm - Table height: 900 mm + 8 easily exchangeable cassette holders + Rotary drive, tool holders on top and bottom infinitely rotatable by 360° + 1 pc. indexable Revotool tools + Programmable clamp movement + Punch scrap extraction device + Spray device Klodpfx Aqjy N Dwrsqet + Brush table + Additional brush tables + Multitalk, USB, SD card and network connection + Digital stroke height adjustment + Light barrier secured on three sides + Various intermediate matrix plates for Trumpf tool sizes 1 and 2 + Tool package + 1 set of keys and operating manuals + Boschert EasySharp tool grinding device

Stanje: novo, Leto izdelave: 2026, nosilnost: 15.000 kg, Stebrni dvižni obračalni mehanizem 15 ton nosilnosti kot komplet ali posamezno 2 strani poganjani Stroj je na voljo kot sinhroniziran komplet ali posamično Klsdpfew Nilaox Aqqst Protec obračalna naprava / pozicionirnik Syncrolift Dvojni steber, ročno daljinsko upravljanje brezžično in ročno Nastavitev stebrov 2x električno pomična Nosilnost 15.000 kg, 360° Navor 21.000 Nm Minimalna delovna višina: 800 mm Maksimalna delovna višina: 1.700 mm Hitrost 0,5 obr/min Premer vpenjalne plošče 1.000 mm Pogon obračanja 2 x 2,2 kW Cena se nanaša na eno enoto z vključenim električnim vozičkom Druga enota kot komplet je 20 % cenejša Po želji z zglobno prirobnico (kardanflansch)

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 930 Ah, napetost baterije: 80 V, skupna višina: 784 mm, skupna dolžina: 1.028 mm, skupna širina: 1.000 mm, Tested forklift battery for your truck – 80V 6PZS 930Ah – DIN A + 1-year warranty + Includes Aquamatik (automatic filling system) + Includes end discharge cable & REMA 320 connector (other connectors available on request) + Capacity: minimum 90–100% (C5 capacity protocol provided on delivery) + Year of manufacture: 2024 Dimensions: Length: 1,028 mm Width: 1,000 mm Height: 784 mm Weight: approx. 2,240 kg Suitable for the following models and more: Linde E 100 / 600 - 1471-00 Linde E 120 / 1200 - 1471-00 Linde E 120 / 600 - 1471-00 Linde E 140 / 1200 - 1471-00 Linde E 140 / 600 - 1471-00 Linde E 150 / 1200 - 1471-00 Linde E 150 / 600 - 1471-00 Linde E 16 - 386-02 - side battery change Linde E 160 / 1200 - 1471-00 Linde E 160 / 600 - 1471-00 Linde E 180 / 600 - 1471-00 Linde E 180 / 900 - 1471-00 Linde E 35 / 600 L - 388-00 Linde E 40 - 388-00 Linde E 40 / 600 HL - 1254-01 Linde E 40 / 600 HL - 388-00 Linde E 40 / 600 L - 388-00 Linde E 40 HL - 388-00 Linde E 45 / 600 HL - 1254-01 Linde E 45 / 600 HL - 388-00 Linde E 45 / 600 HL - 388-00 – side battery change Linde E 45 / 600 L - 388-00 Linde E 45 HL - 388-00 Linde E 50 - 388-00 Linde E 50 / 600 HL - 1254-01 Linde E 50 / 600 HL - 388-00 Linde E 50 / 600 L - 388-00 Linde E 50 HL - 1254-01 Linde E 50 HL - 388-00 Linde E 50 L - 388-00 Linde E100 / 1200 - 1471-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde P 250 - 127-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 L - 127-05 Linde P 250 LWB - 5007-10 – side battery change Linde P 250 LWB - 5007-10 – vertical battery change Linde P 350 - 5007-10 – side battery change Still MX-X Still R 60-40 Still R 60-45 Still RX 60-40 Still RX 60-50 Jungheinrich EFG Jungheinrich EFG 540 Jungheinrich EFG 550 Jungheinrich EFG VAC 35 Jungheinrich EKX 515 Jungheinrich EKX 516 Toyota 7FBMF45 Crown TSP 6000-D Crown TSP 7000 Mitsubishi FB45-2 Kljdpfjy Rnpzsx Aqqet OM-Pimespo-Fiat XE 50 Steinbock-Boss WA 15 Common battery sizes available on request. Transport possible.

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HorizOne50_3, skupna masa: 1.500 kg, višina orodja: 300 mm, obratovalna hitrost: 10 mm/s, skupna dolžina: 1.850 mm, skupna višina: 1.250 mm, skupna širina: 850 mm, hitrost vzvratne vožnje: 40 mm/s, delovna višina: 1.000 mm, širina mize: 1.000 mm, dolžina mize: 1.000 mm, višina mize: 1.000 mm, hod: 250 mm, stiskalna sila: 50 t, dolžinski omejevalnik: 1.000 mm, delovna širina: 300 mm, hitrost dviga: 10 mm/s, upogibna sila (maks.): 50 t, trajanje garancije: 36 meseci, Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne, Finland. 500 kN pressing force provided by a precise, low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming using the proven CoastOne TC12-2D control system. Automatically controlled back gauge for convenient processing of your sheet metal parts, from single part production to series manufacturing. Kedpfxsy A Nnie Aqqelt

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, STROJ ZA UPORABLJENJE ARMATUR B 50 / Demonstracijski stroj -CE-oznaka -Leto izdelave: 2025 -Nožni preklopnik -Popolnoma opremljen stroj z obsežno dodatno opremo Klodpfx Aqjy Efukoqot -Tehnični podatki po podatkovnem listu Dimenzije D x Š x V: 1,4 x 1,3 x 1,5 metra / Teža: 450 kg Pridružujemo si pravico do napak ali napačnih vnosov

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 576.324 km, moč: 324 kW (440,52 KM), prva registracija: 01/2007, vrsta goriva: dizel, gorivo: dizel, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 4, dolžina tovornega prostora: 5.200 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 800 mm, Leto izdelave: 2007, Oprema: žerjav, Crane Number of hydraulic extensions: 2 Number of outriggers: 2 Reach: 8 m Lifting capacity: 60 kg = Further Information = General Information Number of doors: 2 Cab type: single Registration: 2DSE257 Technical Information Number of cylinders: 6 Weights Unladen weight: 15,330 kg Payload: 670 kg gross vehicle weight (GVW): 26,000 kg Functional Crane: PALFINGER PK15002, mounted behind the cab Tipper: Rear tipping Condition Technical condition: very good Visual condition: very good Financial Information Price: On request = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are without VAT. Kodpeyyq Irjfx Aqqolt No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (available on WhatsApp and Viber) MOB: Dutch (available on WhatsApp and Viber) When paying by bank transfer, the money needs to be transferred to our Bank Account listed below. Always check the payment details on our website. If you have received other information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 20 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls are moved up and down via hydraulic cylinders attached to the frame, allowing linear motion * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) Klsdpfxjw Smdfo Aqqet * The positions of the rolls can be easily read via three digital displays * Easy removal of bent workpiece thanks to hydraulically opening head and automatic lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 12/16 mm Bending : 16/20 mm Top & Bottom Rolls : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 5350 mm Width : 1900 mm Height : 1950 mm Weight : 14,450 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: električni, število valjev: 3, premer spodnjega valja: 190 mm, premer zgornjega valja: 190 mm, delovna širina: 2.550 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, moč: 4 kW (5,44 KM), STANDARD EQUIPMENT This mechanical model is generally manufactured for use in light and medium-duty applications. It is particularly suited for rolling materials up to 10 mm in thickness. Typical uses include aluminum processing, ventilation duct manufacturing, billboard production, machine bodyworks, sheet metal assemblies, and many similar applications. All models with planetary gearbox drive High-strength shafts made from SAE 1050 (CK 45) certified steel Welded steel main frames Hand-operated upper roll opening Kledpex D Dfvsfx Aqqjt Movable control panel Conical bending roller Centralized lubrication system Accurate bending with brake motor and planetary gearbox Motorized rear roll for vertical movement Upper roll support system Compliant with EU Safety Directives (CE Certificate) User manual OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Extended shaft ends for pipe and profile bending tools Profile and pipe bending roll set Motorized lower roll with vertical movement Delrin-covered upper roll for Alucobond bending Adjustable speed settings NC Control TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 4/5 mm Bending Capacity: 5/6 mm Upper & Lower Roll Diameter: 190 mm Min. Bending Diameter: 285 mm Motor Power: 4 kW Rear Motor Power: 1.5 kW Length: 4700 mm Width: 950 mm Height: 1300 mm Weight: 3400 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 2.500 t, hod: 1.000 mm, širina mize: 1.800 mm, dolžina mize: 2.600 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided Kedpfxjx N T S Es Aqqolt General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy-duty forming, deep drawing, and metal spinning applications requiring very high tonnage. The 8-guided H-frame structure ensures maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the long stroke. The CHP 2500 model, with its large table dimensions, multi-cylinder main pressing system, and high-capacity hydraulic unit, is designed for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame body type - Stress-relieved frame structure by vibration - Bronze Zr14 slide bearings - Welding applications certified by TURK-AK with WPQR and WPS approval (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing conforming to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Ability to monitor hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-guided H-frame body type Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 2500 Tons Movable Table Size: 1800 × 2600 mm Fixed Table Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration stress relieving Welding Certification: TURK-AK accredited, WPQR and WPS approved, EN ISO 15614-1/2017 Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/sec. Movable Table Drawing Speed: 12 mm/sec. Movable Table Return Speed: 170 mm/sec. Main Cylinder Bore: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 6500 mm Approximate Press Width: 3950 mm Approximate Press Depth: 2600 mm Height of Lower Table from Floor: 1500 mm Pre-Fill Valve: NG 200 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, moč: 4.500 kW (6.118,29 KM), največja višina reza: 580 mm, največja širina rezanja: 1.050 mm, hitrost rezanja: 80 mm/min, dolžina tračnega lista: 7.780 mm, širina tračne žage: 54 mm, trajanje garancije: 24 meseci, STANDARD FEATURES · Hydraulic Vice · Column-Type – Linear Guideways · Variable Speed Control (Inverter) · Safety Switches · Hydraulic Blade Tensioning · Variable Angle Cutting from 0 to 60 Degrees (Positive Direction) · Variable Angle Cutting from 0 to 45 Degrees (Negative Direction) · Angle Gauge · Adjustable Head Descent System · 1 Saw Blade Included · 1 Material Handling Table (2 meters) · 24 Months Mechanical, 12 Months Electrical Warranty · Country of Origin: Turkey · Models Manufactured Between 220 mm and 3000 mm Diameter TECHNICAL SPECIFICATIONS 580X1050 SY2DG Capacity 90° (mm) Round: 580 mm Square: 580 x 580 mm Rectangle: 580 x 1050 mm Capacity 60° (mm) Round: 480 mm Square: 410 mm Rectangle: 300 x 530 mm Capacity 45° (mm) Round: 580 mm Square: 580 x 580 mm Rectangle: 580 x 670 mm Main Motor / Torque: 5.5 kW Hydraulic Motor: 1.1 kW Coolant Motor: 0.09 kW Blade Size: 54x1.3x7780 mm Material Feeding Height: 655 mm Vice Maximum Opening: 1050 mm Vice Maximum Closing: Rolled Table Width: Height-Width-Length: 3780 x 2240 x 1980 mm Kedpfx Aqjvyycmoqelt Weight: 4100 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roller opening head Movable control panel Centrally driven rollers powered by motor Hydraulically movable rear roller and lower roller (up/down) Accurate bending with braked main motor Conical bending and pre-bending system Lower and upper rollers driven by planetary gearbox Rear roller ball system for easier sheet movement Compliance with EU safety directives High-strength forged steel rollers made of SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 pcs) User manual OPTIONAL EQUIPMENT Overhead crane for support during large diameter bending Hydraulic side supports for large diameter bending Kodpfxjw Slcte Aqqelt Ground and polished rollers Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375/1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 22 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary reducer * The hydraulically opening head allows for easy removal of bent workpieces * Very easy operation with movable control panel * The position of the lower rolls can be easily read via two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends for mounting profile or pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) support for large diameter bending Klodpfsw Slg Sjx Aqqst * Hydraulic side supports for large diameter bending * Ground and polished rolls for special work * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16/20 mm Bending : 20/22 mm Upper & Lower Roll : 300 mm Side Roll : 280 mm Motor Power : 11 kW Bending Speed : 5 m/min Length : 4100 mm Width : 1500 mm Height : 1550 mm Weight : 7400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 550 mm, premer zgornjega valja: 550 mm, premer stranskega valja: 450 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 70 kW (95,17 KM), trajanje garancije: 12 meseci, Oprema: kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * The bottom and side rolls are hydraulically operated with pistons attached to the frame, providing linear up-and-down movement * Protected against overload * The top and side rolls are driven by hydromotors and planetary gearboxes (three-roll motor drive) * The positions of the rolls are easily read with three digital indicators * Hydraulic opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) Kledpfx Aqoxbzptoqot * Dual speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending Thickness : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), stiskalna sila: 250 t, hod: 160 mm, širina mize: 700 mm, dolžina mize: 1.100 mm, globina grla: 350 mm, nastavitev hoda: 150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, The eccentric press is a type of mechanical press operated by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure make it a reliable performer suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready with PLC control and dual-hand/foot operation Applications - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES - Steel construction body - Four-sided guided slide - Nodular cast iron connecting rod and gear housings - Crankshaft and transmission shafts made of 4140 tempered steel - Centralized fully-automatic grease lubrication - Pneumatic clutch and brake combination - Compliance with CE safety directives - Double-coil safety valve - Manually adjustable stroke - Finger-hand protection safety system with light curtain Kledpfxox N Nfbe Aqqst - PLC control system - Dual-hand/foot control system - Mechanical safety system - Emergency reverse motor operation - Complies with occupational health and safety regulations - Conforms to CE standards ✅ OPTIONAL FEATURES - Vibration isolation mounts - Touch LCD screen (standard for 150–300 ton models) - Hydraulic safety system (standard for 200–300 ton models) - Spare bolster plate - Coil feeder, straightener, and uncoiler - One set of dies according to requested specifications - Eight-way guided slide ✅ TECHNICAL SPECIFICATIONS (250 TON) - Capacity: 250 tons - Throat depth: 350 mm - Table–ram distance: 520 mm - Slide–table distance: 630 mm - Distance between side frames: 520 mm - Ram adjustment (regulation): 150 mm - Approx. press width: 2000 mm - Approx. press depth: 2500 mm - Approx. press height: 3100 mm - Front anchoring dimension: 930 mm - Side anchoring dimension: 1430 mm - Table hole diameter: Ø250 mm - Table size: 700×1100 mm - Die clamping slot diameter: Ø60 mm - Ram size: 670×380 mm - Table height from floor: 810 mm - Stroke adjustment: 20–160 mm - Strokes per minute: 40 spm - Motor power: 22 + 2.2 kW - Motor speed: 1450 rpm - Approximate weight: 12,000 kg Note: Please inform us if you require modifications in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Highly suitable for bending round and various diameter materials Lower roll and side rolls move hydraulically up and down in direct linear motion Protected against overloading The top roll is driven by an electric motor and planetary gearbox. The lower roll is driven by a cardan coupling system. Two rolls are driven The positions of the rolls are easily read with three digital displays The piece can be easily removed thanks to the hydraulically opening head Very easy operation with the mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety regulations and bears the CE mark Operating manual OPTIONAL EQUIPMENT Klsdpfx Aqsw Slxzeqot Remote assistance via NC control Overhead crane (elevator) for support during large diameter bending Hydraulic side supports for support during large diameter bending Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 25 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Roll positions can be easily read with three digital readouts * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC automation control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length : 2550 mm Pre-bending : 16/20 mm Bending : 20-25 mm Upper & Lower Roll : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 4850 mm Width : 1900 mm Kjdpfew Smb Rox Aqqolt Height : 1950 mm Weight : 12800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 1.550 mm, delovna širina: 1.550 mm, najv. debelina pločevine: 15 mm, najv. debelina jeklene pločevine: 15 mm, moč: 7,5 kW (10,20 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload Kjdoxbzr Uspfx Aqqelt * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with movable control panel * Position of lower rolls can be easily read with two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends to mount profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Rollers for bending profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-Bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, hod: 200 mm, širina mize: 1.000 mm, dolžina mize: 1.200 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by force generated via an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses offer high stability and process reliability thanks to their rigid frame design. The CRONOSSTECH CEHP-TB-250 – H Type Eccentric Press (250 Ton) is engineered for stable operation in high-volume production, with a focus on die protection and operator safety. Its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure deliver reliable performance suitable for continuous production. Key Advantages - Stable operation with large dies thanks to a 1200×1000 mm table size - Die/equipment protection with hydraulic overload safety system Kledpfjx N Sc Ajx Aqqjt - Controlled and user-friendly operation via PLC + touchscreen display - Enhanced operator safety with light curtain protection - Reduced maintenance needs with automatic lubrication system Typical Applications - Punching / cutting / die forming operations - Mass production lines with automatic feeding - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel welded frame • Pneumatic clutch-brake system • T-slotted auxiliary bolster plate • 8-point guided ram • Adjustable stroke on a single connecting rod • Balancer piston on ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor direction • Hydraulic overload safety system • Motorized ram adjustment mechanism • Light curtain safety system • Enclosed oil tank with gear assembly • Dual-coil safety valve • CE compliant ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety guard at table front • Custom die configurations ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-250) Capacity: 250 Ton Table-Ram Distance: 500 mm Housing Width: 1230 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2550 mm Press Height: 4600 mm Table Size: 1200×1000 mm Ram Face Size: 1200×1000 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 31,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up and down movement for rear roll and lower roll Precision bending with braked main motor Conical bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear Roll Ball System for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 units) Operating manual OPTIONAL EQUIPMENT Top crane (hoist) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Kodpfsw Slcgsx Aqqelt Min. bending diameter: 375 / 1250 mm Motor power: 7.5 + 1.5 kW Bending speed: 5 m/min Tank capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, hod: 800 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 80 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Flow Forming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and flow forming applications. The H-frame structure with 8 guideways ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 250/80 model is designed for medium to high tonnage deep drawing and flow forming operations, featuring a main ram capacity of 250 tons and a lower cushion (pot) capacity of 80 tons. The frame construction is stress-relieved by vibration for long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame type press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - WPQR and WPS approved welding applications by TÜRK-AK accredited sources (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system Kodpfxsx N Uaqo Aqqslt - Touchscreen operator panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic centralized lubrication system - Electronic filter contamination monitoring - Hydraulic unit oil temperature and system status monitoring via display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching materials 📐 Technical Specifications – CHSP 250/80 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guideway Bearings: Bronze Zr14 Capacity (Ram): 250 Tons Capacity (Cushion): 80 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Stroke (Cushion): 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved and TÜRK-AK accredited EN ISO 15614-1/2017 (Welding operations are supervised by “welding coordination engineers” certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/sec Moving Table Flow Forming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Forward Speed: 30 mm/sec Main Cylinder Bore: Ø360 mm – Ck45 Cushion Cylinder Bore: Ø200 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Machine Height: 4200 mm Approx. Machine Width: 3250 mm Approx. Machine Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Measurement Ruler: NOVATECHNIK or TURCK PLC Control: DELTA Touchscreen Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approx. Weight: 18 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotor and planetary gearbox * Easy removal of bent parts thanks to hydraulically opening head * Very easy operation with movable control panel * Position of the lower rolls easily readable via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of rolls * Extended shaft ends for mounting profile/tube bending rolls OPTIONAL EQUIPMENT * Upper crane (lift) for support during large-diameter bending * Hydraulic side supports for large-diameter bending * Ground and polished rolls for special applications * Section bending rolls for profile bending Kledpfxsw Slf Us Aqqjt * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of rolls TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Rolling/Bending: 16/18 mm Upper & Lower Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg