Chr. Häusler Valjčna Stiskalnica Za Pločevino nakup rabljenega (84.411)

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje. Redpfx Apev Rpxlebeu

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Rjdpfjxfwdjx Apbju Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: dober (rabljeno), Good, used condition Rodpst Hxudefx Apbju Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / Technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functionality guaranteed upon handover

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Rsdjfci D Aepfx Apbou Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Rjdpfxsgfm Ryj Apbju Prepared for connection to a cooling unit

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke Izjemno visok pritisk stiskanja: 3.700 kg/cm² Velik lijak: 600 x 1500 mm Format briketa: 60 x 40 mm Zmogljivost: Aluminijevi ostružki – do 70 kg/h Rodpfx Ajw Ig Suspbou Jekleni ostružki – do 180 kg/h Medeninski ostružki – do 220 kg/h *odvisno od vhodnega materiala in nastavitev Vključeno: - Kad za emulzijo - Črpalka za emulzijo - Oljni hladilnik

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net Rodpsd N Dnhefx Apbju - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: dober (rabljeno), Tehnični podatki: Briketirni stroj v dobrem stanju Letnik: 2007 Tehnični pregled v 06/2025 Cilindrična briketa 80 mm Pretok do največ 150 kg/h *le približno 3.949 delovnih ur - Hidravlična preša: briketirni stroj z izmetno stezo - Hidravlična enota: 4 kW - Tlak: maks. 300 bar - Transportne dimenzije: 1585/2140/H1940 mm - Teža: 1370 kg Rodpfxewtdk Tj Apbeu Garancija delovanja ob prevzemu Z veseljem omogočamo brezplačen preizkus!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Rsdpfx Apod Nnwljbou Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 29 h, Another machine available immediately, ex works Neckartailfingen *Subject to prior sale *Round silo available at additional cost Press only deliverable with an additional plant component, Rjdpfx Ajfhql Tepbju such as chipper, granulator, hammer mill, screw conveyor, belt conveyor with overbelt magnet, or extraction system RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Type Classic – throughput up to 425 kg/h *material dependent Options for an extra charge – plant engineering / mütek Systemtechnik: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary airlocks - Screw conveyors - Silos - Control system integration of all types - Semi-automatic packaging technology Your benefits: Key point: + Highly established, mature die-press thanks to 25 years of experience. The challenge and expertise are in the details, e.g. use of top-quality valves and cylinder seals. + Suitable for 24h operation + Long service life + Low maintenance costs + Compact design + High energy efficiency due to innovative hydraulics Technical data – Briquetting press: Throughput: up to 425 kg/h* *depending on the bulk density of your input material *based on a bulk density of 200 kg per cubic meter Exact information available after successful test with your material. If no test material is provided, we cannot guarantee briquette quality or throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Hydraulic main compressor Pressing pressure: up to approx. 1700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual control of all cylinders Control cabinet "dust protected" with PLC control and touch display Total power consumption of the briquetting press: approx. 33 kW Raw material requirements: - Moisture content (atro) must be min. 6% to max. 15% - Maximum chip size: 20 x 2 x 2 mm - Ambient temperature at installation: minimum +8° C - Material feed must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Stanje: dober (rabljeno), Refurbished used machine *Options at extra cost, see below with full 1-year warranty Delivery time approx. 16 weeks after order Technical specifications: Throughput capacity up to max. 1,200 kg/h, depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm Including 2 m press channel Main motor power: 45 kW Feed auger with geared motor: 2 x 2.2 kW Compactor auger: 2 x 5.5 kW Distributor auger: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operating states and load display for main drive and feed augers PLC control: Siemens S7/300 with operating hours counter in the control cabinet Machine has CE mark Automatic start/stop function Dimensions: 3,100 x 860 x 1,800 mm (L x W x H) Weight: 4,500 kg Options: Silo for MAP series (only suitable for a MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and fill level sensor. €19,700 net plus VAT. -Temperature control unit for press tools To maintain temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Prewired – absolutely necessary for operation Including corresponding control €7,850 net -Guillotine for cutting briquettes to length Compressed air supply required on site €6,940 net plus VAT. -Transfer pipe / cooling section (nominal: 4 x 2 m) Per 2 meters €990 net Assembly / commissioning (nominal per press approx. 2–3 days on site) Charged according to actual effort and time, invoiced separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday/night hour: 50% surcharge Each Sunday/public holiday hour: 100% surcharge Daily allowance per technician: depending on country Per car/van and distance kilometer: €0.98/km Travel and accommodation will be invoiced on an actual cost basis or as a flat rate at the buyer’s expense. Redpfxo E Dquj Apbju Material testing with customer-provided material (by arrangement, up to max. 750 kg) – €1,970 net flat rate ---- Raw material requirements: - Moisture content (atro) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Ambient temperature: heated room with at least +5°C - Material must be free of metals and mineral contaminants. Damage to press tools and/or increased wear may otherwise occur.

Stanje: dober (rabljeno), Leto izdelave: 2001, Dobre ohranjeno, rabljeno stanje Malo delovnih ur (1675 h) Motor: 11 kW Tlak: nastavljiv do največ 250 barov Pretok do največ 220 kg/h Rodpfx Apowcc D Rjbsu Briket: 150x60 mm Dimenzije stiskalnice: pribl. 2200x3000x1920 mm (D x Š x V) Dimenzije krmilne omare: 500x1250x2120 mm (D x Š x V) Teža pribl. 3000 kg

Stanje: dober (rabljeno), Leto izdelave: 2025, Requirements: - Material must be free-flowing (less than 18 mm) - Material must be pure, ash content less than 1% ATRO Caution with: sand, stones, and minerals - Compression is performed using press tongs - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Options available at extra cost: Plant engineering / mütek Systemtechnik: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - Control system integration of all types - Semi-automatic packaging technology + 24h continuous operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Briquette density of up to ≥ 1 kg/l achievable *Details upon testing Functionality: The machine features a silo with agitator. Each of the 4 corners of the storage silo contains a vertical screw which compacts the material downward into the press chamber. The machine operates with two cylinders, each pressing in two directions (either forward or backward movement of the cylinder). This results in 4 briquette outlets with 6 individual briquettes each. *Ideal for automatic feeding of boilers Format: Ø 30 mm Throughput: up to max. 310 kg/h Motor power: approx. 27 kW (total) Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format allows firing of industrial combustion plants using screw conveyors Fully automatic 24h operation possible High energy efficiency Briquettes/pellets with consistently high quality & density For automatic feeding into industrial combustion plants Small to medium quantities of wood chips originating from various processing industries (primarily wood, biomass, and more) can be optimally compacted. The small Ø 30 mm format offers an attractive alternative. Unlike conventional briquettes, these can be automatically fed into industrial combustion systems. Rsdpsfbb Arofx Apbsu In addition to wood, a variety of other materials can also be processed without issue (various types of biomass & agricultural residues).

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta upravljanja: ročni, vrsta aktuacije: mehanski, najv. debelina pločevine: 10 mm, Oprema: naprava za krivljenje stožcev, nožno daljinsko upravljanje, Mehanska tribralna valjčna stiskalnica OMEG Uporabna dolžina krivljenja: 2050 mm. Premer spodnjih valjev: 200 mm Rjdpfx Asy H Ikkspbeu Premer zgornjega valja: 250 mm Debelina materiala za preoblikovanje: 8-10 mm. Naprava za stožčasto krivljenje Podaljšani valji za krivljenje profilov Rabljeni stroj, popolnoma delujoč.

Stanje: zelo dobro (rabljeno), Hydraulic veneer press with medium heating plates Undercylinder design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display of the heating plates Pressing pressure steplessly adjustable via pressure switch Two-stage hydraulic pump Rack equalization Main switch Safety tear-off cable CE marked Pressing area: 2550 x 1350 mm Opening width: approx. 350 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3200 kg Note on used machines: • Technical data subject to change and prior sale. • Prices indicated are ex works – free loaded! • The machine has been cleaned and functionally tested. Rsdpfx Ajy Egkgspbsu • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Dolžina zložljivih polken: maks. 3000 mm Širina zložljivih polken: maks. 700 mm Navpični pritisk nastavljiv: do 8000 kg Vodoravni pritisk: 2500 kg Rjdsxuf Dzjpfx Apbeu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, skupna masa: 500 kg, moč: 3 kW (4,08 KM), PLC control system with touch panel Briquetting capacity 80 - 100 kg/h Feed screw diameter 130 mm Connection diameter (internal) 160 mm Briquette diameter 60 mm Rjdpfx Apjwhv Imsbsu

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.500 mm, skupna širina: 600 mm, skupna višina: 1.350 mm, skupna masa: 1.200 kg, Ponujamo to rabljeno stiskalnico za korpuse Hess Korpus Express, letnik 1994. Letnik: 1994 Rsdpfozaku Djx Apbou Teža: 1200 kg Dimenzije dolžina: 2500 mm Dimenzije širina: 600 mm Dimenzije višina: 1350 mm Stroj je bil pri nas v uporabi do pred kratkim. Trenutno se prodaja zaradi reorganizacije. Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1113, skupna širina: 1.170 mm, skupna višina: 1.510 mm, skupna dolžina: 1.850 mm, premer briketa: 60 mm, skupna masa: 770 kg, Never used = As-new machine condition Year of manufacture: 2024 Operating hours: 6! - Option for water or oil cooling, suitable for larger or multi-shift operations (price stated without cooling) - Sufficiently large feed hopper ensures extended work cycles without frequent material refilling Technical specifications: Redpfxjyh Nfhs Apbju Motor power: 7.5 kW Briquette output: 40–100 kg/h depending on material Briquette diameter: 60 mm Briquette length max 60 mm (so-called endless briquette) Pressing pressure: 900 kg/cm² Hopper diameter: 1000 mm Dimensions: 1850 x 1170 x 1510 mm Weight: 770 kg Features: Hydraulic unit: 7 pressing cycles/min LCD Siemens touchscreen programmable control panel Manual or fully automatic operation – PLC control – Siemens Dual pressure gauge for improved pressure monitoring Briquetted material level sensor Oil level sensor Preheating unit for operation in cold environments Inspection window Option for integration into existing production lines Voltage: 400V – 50 Hz Moisture content of processed material must not exceed 18%

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, Schöberl lepilni stoj Višina vpenjanja: 1900 mm Dolžina vpenjanja: 3000 mm ali več Rodoy Sg Ekspfx Apbsu Premičen 6 vpenjalnih elementov Potreben prostor: 3000 x 1000 mm Uporabljiv z obeh strani Ogrevalno ravnilo: 3000 mm Letnik proizvodnje: 2007 Cena: 7000 EUR, nova cena: 13 000 EUR

Stanje: rabljeno, Leto izdelave: 1982, Presskraft 40 t Ständerweite 695 bzw. 215 mm Hub 100 mm Rjdpfxstqqq Rj Apbou Tischaufspannfläche 650 x 440 mm Stößelfläche 580 x 285 mm Einbauhöhe 400 mm Gesamtleistungsbedarf 15 kW Maschinengewicht ca. t Abmessungen der Maschine (L x B x H): 1,63 x 1,05 x 2,61 m - mit Ziehkissen - mit SICK-Lichtschranke

Stanje: novo, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2025, vrsta upravljanja: ročni, Oprema: CE označba, dokumentacija / priročnik, OMEC 4-Roller Mechanical Symmetrical Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand New “CE” Certified. Made in Italy. Double Pinch Design. Powered Upper and Lower Rollers with Equal Drive. Motorized Side Rollers for Vertical Adjustment. Front Opening for Upper Roller. Special Bearings for Side Rollers. External Lever for Roller Tilt Adjustment. Sheet Clamping System with Bearing Device. 2-Pedal Foot Switch. Electrical Panel Compliant with “CE” Standards. Millimeter Scale Indicator for Sheet Clamping Position. Standard equipment included with the rolling machine: - Conical device on the upper roller (frontal). - No. 2 digital position displays for the side rollers. - No. 1 display for motorized sheet clamping. - Grinding/turning of rollers after hardening process. - Roller hardening. - Lateral sheet loading table + sheet centering guides with millimeter references. Working width: 1530 mm. Rjdsy E Schjpfx Apbou Upper and lower roller diameter: 90 mm. Side roller diameter: 95 mm. Sheet thickness: 1.5 – 2 – 2.5 mm (1.5 x D, 3 x D, 5 x D). Roller hardening: HRC 55/60, depth 2 mm. Installed power: 1.8 kW. Dimensions: 2290 x 750 x 1150 mm. Weight: 690 kg.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 76 / 2011, premer briketa: 75 mm, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 380 V, We are offering a COMAFER DIN 250 briquetting press in good condition, year of manufacture: 2011. Cylinder equipped with closed-circuit oil cooling and cooler. Rjdpfx Ajy Uihaepbeu Capacity: 100–250 kg/hour, depending on material. Briquette diameter: 75 mm. Cylindrical casing (ø1200) with inspection door, additional ring (sleeve) ø1200 / h930. Pressing force approx. 1100 kg/cm². 2 cylinders. Briquette roller diameter: 200 mm. Pump motor (11 kW / 15 HP, 380 V, 50 Hz). Monobloc, self-centering, mounted in round vice without clamping rods. Electrical control panel with PLC, automatic and manual cycles. Shut-off device with open vice and vice pressure gauge. Digital thermostat for oil temperature regulation, level switch to prevent oil leaks. Closed-circuit oil cooling system (air/oil). Closed-circuit cooler for the chuck (580 mm x 550 mm x 908 mm, weight 56 kg). Thread-cutting head for producing long briquettes of uniform length, in accordance with CE regulations. Dimensions: 2100 mm x 1350 mm x 1540 mm (height). Weight: 1600 kg. If you have any questions or need further information, please send us a message. Telephone information is available in Hungarian only.

Stanje: rabljeno, OTT JU 90 Veneer Press - used - ----- Technical Specifications ----- Pressing area: 2,550 x 1,350 mm Heating plate power: 9,100 W per plate Rjdpfx Ajwmmraspbou Number of cylinders: 4 units

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical data: Complete in standard specification with: Rodpfx Apow Nafksbsu Sturdy, torsion-resistant steel frame in welded and bolted construction Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Lamella pressure beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints Counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick, coated support panels Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance travelling nuts with grease reservoir Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW) The pressing force of the pressure beams is infinitely variable, set electronically via two potentiometers and controlled by frequency converters; therefore, the pressing force regulation is absolutely wear-free Pressing force for the horizontal pressure beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for the vertical pressure beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning via 3-position selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressure beams, e.g. for low pressing force, drawers, and 45° carcasses Simple operation via 6 separate push buttons; 8 movement sequences selectable via control panel Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both pressure beams Re-press function to increase or decrease the pressing force during the pressing cycle Working height/loading height: 300 mm Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Incl. surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing of special components Incl. set of machine feet for working height 500 mm Location: Flörsheim Availability: Immediate