Baioni Stiskalnica Za Furnir nakup rabljenega (84.779)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Cesena
312 km
Valjčna stiskalnica za pločevino
MGM3035 cnc 4roll 3000x35 mm
Pokliči
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: EVO, model krmilnika: EVO 4 AXIS 15", število valjev: 4, premer zgornjega valja: 300 mm, premer valja: 300 mm, dolžina valja: 3.100 mm, delovna širina: 3.000 mm, delovna višina: 1.250 mm, najv. debelina pločevine: 30 mm, najv. debelina jeklene pločevine: 30 mm, maks. debelina pločevine iz nerjavečega jekla: 25 mm, skupna masa: 17.000 kg, skupna dolžina: 5.500 mm, skupna širina: 2.000 mm, skupna višina: 2.100 mm, moč: 18,5 kW (25,15 KM), vhodna napetost: 400 V, število digitalnih zaslonov: 4, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, 4-valjna hidravlična stroj za krivljenje pločevine, nazivna zmogljivost 3000x35 mm
Model: MG M3035, letnik uporabe 2024, stroj kot nov, s priloženo garancijo
Planetni dvojni pred-predklon
Zmogljivost:
- širina pločevine: 3000 mm
- debelina pločevine pri valjanju: 30 mm
- pred-predklon: 25 mm
Minimalni premer valjanja notranji Ø: 350 mm
Maksimalna odprtina za dovod pločevine: 3100 mm
Poseben zgornji valj s zmanjšanim premerom na 300 mm za doseganje valjanja Ø 350 mm
Pogon:
Električni motor: 18,5 kW na hidravlični enoti
Napajanje: 400 V / 50 Hz – 480 V / 60 Hz
Vgrajena oprema:
- Kaljeni valji za visoko trdnost površine
- Stožčasto krivljenje pločevine
Ijdpfxsy Tbf Ij Ab Ajtg
- Elektronska konzola na kolesih z joysticki in prikazovalniki
- CNC-programabilni 4-osni krmilnik z 15” zaslonom na dotik
- Nastavitev skoraj neomejenega števila programov valjanja s funkcijo teach-in in CAD/CAM operaterskim vmesnikom
- Hidravlični pogon centralnih valjev
- Nastavljivo breme pred-predklona
- Prednji odpirajoči izmetni sistem zgornjega valja za razkladanje zaprtih lupin
- Sistem za ponovno valjanje/kalibracijo varjenih lupin
- Varnostna in nujna zaustavitev
- Navodila za uporabo in sheme
Dimenzije stroja: 5500 x 2000 x 2100 mm
Teža: 17 ton
Dodatna oprema priložena stroju:
Oglejte si priloženo postavitev stroja (skica):
- 1x centralna hidravlična podpora, kapacitete 2,2 t za podporo velikih lupin do premera 4,5 m
- 1x leva stranska hidravlična podpora, 2,2 t, dvojna roka
- 1x desna stranska hidravlična podpora, 2,2 t, dvojna roka
Mali oglas
Avstrija
156 km
Lisec stiskalnica za polnjenje s plinom FPS-36/25US
LisecFPS-36/25US
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 12.100 mm, skupna širina: 2.300 mm, skupna višina: 3.250 mm, delovna višina: 500 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Lisec stiskalnica za polnjenje s plinom FPS-36/25US, letnik 2005, sestavljena iz naslednjih komponent:
RTVN-27/25MZ, merilno območje za stiskalnico za polnjenje s plinom
FPS-36/25US, stiskalnica za polnjenje z argonom
RTVN-32/25ST, prvi izhodni trak stiskalnice za polnjenje s plinom
RTVN-22/25ST, drugi izhodni trak stiskalnice za polnjenje s plinom
RTVN-16/25ST, tretji izhodni trak stiskalnice za polnjenje s plinom
Itsdpsy Sv Smefx Ab Asg
Naprava je bila v obratovanju do demontaže in bo na voljo na trenutni lokaciji od konca maja 2026.
Mali oglas
Hofkirchen im Traunkreis
227 km
Lisec stiskalnica za polnjenje plina FPS-36/25U2T
LisecFPS-36/25U2T
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Lisec plinska polnilna stiskalnica za maksimalne dimenzije elementov 3500 x 2500 mm, leto izdelave 2001, sestavljena iz:
- RTVN-15/25ST, podaljšek za merilno cono, tip z jermenom, leto izdelave 2001
Isdoy Swfzopfx Ab Aetg
- RTVN-15/25MZ, merilna cona za plinsko polnilno stiskalnico, tip z jermenom, z merjenjem dolžine in višine ter merjenjem debeline stekla in okvirja, leto izdelave 2001
- FPS-36/25U2T, polnilna stiskalnica za argon, nastavitev pritisnih plošč preko vreten, možna tudi polnitev modelov, na stroju se lahko obdelujejo tudi 4-stranski stopničasti elementi (spodaj 50 mm, spredaj, zgoraj in zadaj 130 mm), leto izdelave 2001
- RTVN-15/25ST, izhodni transportni trak stiskalnice, tip z valji, leto izdelave 2001
Stroj je v brezhibnem delovnem stanju in si ga je po dogovoru mogoče ogledati v našem skladišču strojev.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMPP 180
Pokliči
Stanje: novo, Leto izdelave: 2026, Availability upon request
Very robust machine with high pressing force
- also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size.
Our best-selling briquetting press series
+ Proven, simple technology, ensuring extremely low susceptibility to failure
+ 25 years of experience, continuous development, and know-how
+ Several thousand machines in operation with satisfied customers
+ Excellent value for money
Optional demonstration cooling unit surcharge: + €4,980 net
(can also be retrofitted later)
* Cools the press clamp (important from 4 hours of operation) and the hydraulic oil
* Cooling unit recommended for regular operation exceeding 4 hours continuously
Commodity code: 84793010
Briquette diameter: 70 mm
Front sleeve: 125 mm
Max. briquetting stroke: 100 mm
Optimal briquetting stroke: 80 mm
Capacity (material-dependent): up to 150 kg/h*
*depending on bulk density
*based on a bulk density of 200 kg per cubic meter
Motor output: 9.2 kW
Itedpod Nm Sijfx Ab Asg
400 Volt / 50 Hz / 3-phase
Length: 2,095 mm
Width: 1,300 mm
*with large chamber 1,600 mm
Height: 1,700 mm
Weight: 1,250 kg
Oil volume: 220 liters
Silo diameter: 1,200 mm
Silo capacity: approx. 1 m³
Pump: 75 liters
Hydraulic pre-compressor
Press clamp cooling option: yes, with optional coolable press clamp
Hydraulic oil cooling option: yes
Cooling of press clamp and hydraulic oil possible with optional cooling unit
Level monitoring option: yes
Continuous strand briquette option: yes (material-dependent)
Enlarged filling slider option: yes, with optional enlarged filling slider
CE compliant
Raw material requirements:
- Moisture content (atro) must be between at least 6% and a maximum of 18%
- Maximum chip length: 20 mm
- Installation temperature: heated room with at least +5°C
- Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütek SystemtechnikMPP 60
Pokliči
Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice.
+ Proven, simple technology for extremely low failure rates
+ 25 years of experience, ongoing development, and expertise
+ Several thousand machines in operation with satisfied customers
+ Outstanding price-performance ratio
Optional extras (available at additional cost):
*Surcharge for fill level sensor, enabling automatic operation:
+ €995 net
*Surcharge for large pre-compression chamber + €970
(Recommended for very light materials such as straw, increases machine width by 13 cm)
Briquette diameter: 50 mm
Front bushing: 50 mm
Max. briquette stroke: 40 mm
Optimal briquette stroke: 40 mm
Throughput (material dependent): up to 60 kg/h*
*Depending on bulk density
*Based on a bulk density of 200 kg/m³
Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1,680 mm
Width: 1,100 mm
Height: 1,500 mm
Iodpfogl Nlmjx Ab Ajtg
Weight: 680 kg
Oil volume: 110 liters
Silo diameter: 1,000 mm
Silo capacity: approx. 0.7 m³
Pump output: 37 liters
Hydraulic pre-compressor
Press tongs cooling option: No
Hydraulic oil cooling option: Yes
Fill level monitoring option: Yes
CE compliant
Raw material requirements:
- Moisture content (atro) must be between at least 6% and max. 18%
- Maximum chip length 15 mm
- Installation temperature: Tempered room, at least +5°C
- Customer must provide protection against hydraulic oil loss
- Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result
Mali oglas
Neckartailfingen
511 km
Briketna stiskalnica Briketna stiskalnica za aluminij
mütekMPP NEM 300
Pokliči
Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months
Ijdpfxjchqxxe Ab Aetg
---
Our bestselling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, continual development, and expertise
+ Several hundred machines in operation with satisfied customers
+ Excellent price-performance ratio
The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%.
The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material.
The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette.
Advantages of briquette production include:
• Volume reduction of up to 90%
• Emulsion recovery
• Cost savings in storage and transport
• Cost-effective disposal
• Profitable sale
--
Briquetting Press NEM 300
Throughput approx. up to 200 kg per hour (highly depending on material).
- In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion.
- In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion.
Technical specifications:
Motor: 7.5 kW (+ 0.55 kW on the cooler)
400 Volt / 50 Hz / 3-phase
Front bushing: 125 mm
Max. briquette stroke: 100 mm
Optimal briquette stroke: 80 mm
Pump: 80 liters
Storage hopper approx. 0.5 m³ capacity (extendable)
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje, stiskalnica za briketiranje
mütek SystemtechnikMGP 60
Pokliči
Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj!
Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa
Zmogljivost: do največ 60 kg/h
Briket: 50 mm valjaste oblike
Motor: 5,5 kW
Dimenzije: 1.900 x 1.350 x 1.410 mm
Teža: pribl. 860 kg.
Iedpfx Aov Rpxlob Aetg
Zahteve:
Izhodni material idealno krajši od 25 mm dolžine ostružkov
Vsebnost vlage 6–12 % ATRO
Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd.
Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMFP
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price
Machine available immediately (ex works Neckartailfingen)
Demonstration unit
Your benefits:
+ Very robust, simple technology
+ Excellent price/performance ratio
+ Suitable for continuous operation
+ Proven, well-functioning and established machine over many years
Includes control cabinet with timer operation
The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically.
Technical data:
Briquette dimensions: 30/35 mm (square)
Briquette length: 5–35 mm (depending on material)
Throughput capacity: up to max. 25 kg/h (depending on material)
Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H)
Machine weight: approx. 250 kg
Silo capacity: approx. 250 litres
Motor: 2.2 kW, 400 V – 50 Hz
Noise emission: 62 dB
Raw material requirements:
• Wood shavings and dust less than 15 mm in length
• Moisture content less than 15% ATRO
Isdpfefci D Aox Ab Ajtg
• Sand, stones, metals, and minerals increase wear
---
Options at extra cost:
-Timer function + €490 net
Machine is started manually and switches off automatically after the set time X.
-Fill level sensor for automatic operation + €1,450 net
Press starts and stops automatically
* NEW!!! Now also available in 230 Volt,
Motor then 3 kW instead of 2.2 kW,
Surcharge + €690 net (delivery time approx. 8 weeks)
---
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütek SystemtechnikMPP NEM 900
Pokliči
Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below
* Production time approx. +/- 6 months
Ijdpfx Aogfm Ryeb Aotg
The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%.
The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material.
The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected.
The more homogeneous the input material, the more uniform the briquette lengths.
Advantages of briquette production include:
- Volume reduction by up to 90%
- Emulsion recovery
- Cost savings on storage and transport
- Economical disposal
- Profitable resale
Briquetting Press NEM 900:
For briquetting aluminum chips
Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm)
Last test with aluminum chips < 18 mm: approx. 260 kg/h
*More details available after a free test with your material.
Briquette diameter: Ø 70 mm
Optimal briquette length: 70 mm
Technical data:
Total connected load: approx. 31 kW
Continuous operation: approx. 22 kW
400 Volt / 50 Hz / 3-phase
Pump: 120 + 60 litres per minute
Silo: 1 m³
Silo diameter: 1200 mm
Including agitator
Oil tank: 600 litres
Dimensions (LxWxH): 2500 x 1700 x 1730 mm
Weight: 2250 kg
Hydraulic pre-compaction via ram
Main press cylinder
Vertical cylinder
Prepared for connection to a cooling unit
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
R 200
Pokliči
Stanje: dober (rabljeno), Good, used condition
Itedpfx Abet Hxude Aeg
Main motor: 11 kW
Throughput up to max. 200 kg/h
Year of manufacture: 12/2008 / Technically inspected in 01/2025
Briquette size: 150x60 mm
*Used machine, sold as seen
Functionality guaranteed upon handover
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMPP 280
Pokliči
Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement
Very robust machine with high pressing force
- Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible.
Our bestselling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, ongoing development, and expertise
+ Several thousand machines in operation with satisfied customers
+ Excellent price-performance ratio
Surcharge for cooling unit + €4,995 net (can also be retrofitted later)
* Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause)
Briquette diameter: 80 mm
Front bush: 125 mm
Maximum briquette stroke: 100 mm
Optimal briquette stroke: 80 mm
Throughput (depending on material): up to 200 kg/h*
*depending on bulk density
*based on a bulk density of 200 kg per cubic meter
Motor power: 9.2 kW
400 Volt / 50 Hz / 3-phase
Length: 2095 mm
Width: 1300 mm
Height: 1700 mm
Weight: 1250 kg
Oil volume: 220 liters
Silo diameter: 1200 mm
Silo capacity: approx. 1 cbm
Pump: 75 liters
Itsdpfx Abexfwdj Aog
Hydraulic pre-compressor
Press jaw cooling option: yes, with special accessory coolable press jaw
Hydraulic oil cooling option: yes
Cooling of press jaw and hydraulic oil with cooling unit (special accessory)
Fill level monitoring option: yes
Continuous briquette option: yes (material dependent)
Enlarged filling slider option: yes, with special accessory enlarged filling slider
CE compliant
Requirements for raw material:
- The moisture content (atro) must be at least 6% and not exceed 18%
- Maximum chip length 20 mm
- Installation temperature: heated environment, at least +5°C
- The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje, stiskalnica za briketiranje
RUF4/3700/60x40
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke
Izjemno visok pritisk stiskanja: 3.700 kg/cm²
Velik lijak: 600 x 1500 mm
Format briketa: 60 x 40 mm
Zmogljivost:
Itsdpow Ig Suofx Ab Aog
Aluminijevi ostružki – do 70 kg/h
Jekleni ostružki – do 180 kg/h
Medeninski ostružki – do 220 kg/h
*odvisno od vhodnega materiala in nastavitev
Vključeno:
- Kad za emulzijo
- Črpalka za emulzijo
- Oljni hladilnik
Mali oglas
Neckartailfingen
511 km
Briketirna stiskalnica Briketirna stiskalnica za aluminij
mütekMPP NEM 90
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new
only 704 operating hours
Special price for lightly used demonstration machine
Itodpfxod N Dnho Ab Aog
Base machine: €29,990 net
Options at extra cost:
- Cooling unit: €3,995 net
- Emulsion tank: €3,990 net
The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%.
Throughput capacity: up to max. 70 kg/h (material-dependent),
Briquette diameter: Ø 50 mm,
Motor: 5.5 kW,
400 Volt / 50 Hz / 3 phase,
Pump: 40 litres
Max. briquette length: 50 mm,
Optimal briquette length: 40 mm,
Silo diameter: 1,000 mm,
Oil tank: 110 litres
Dimensions: 1750 x 1130 x 1100 mm (L x W x H)
Weight: 950 kg
Hydraulic pre-compaction via slide
Main press cylinder
Vertical cylinder
Fill level sensor: yes
Requirements for the input material
- Max. chip length: 15 mm
- Installation temperature: temperature-controlled room at a minimum of +5°C
- Max. weight on agitator: 150 kg
- The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje, stiskalnica za briketiranje
RUFRB4/1600/80
Pokliči
Stanje: dober (rabljeno), Tehnični podatki:
Itsdpfx Aowtdk Tjb Aog
Briketirni stroj v dobrem stanju
Letnik: 2007
Tehnični pregled v 06/2025
Cilindrična briketa 80 mm
Pretok do največ 150 kg/h
*le približno 3.949 delovnih ur
- Hidravlična preša: briketirni stroj z izmetno stezo
- Hidravlična enota: 4 kW
- Tlak: maks. 300 bar
- Transportne dimenzije: 1585/2140/H1940 mm
- Teža: 1370 kg
Garancija delovanja ob prevzemu
Z veseljem omogočamo brezplačen preizkus!
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMAP 1200
Pokliči
Stanje: dober (rabljeno), Refurbished Used Machine
Base machine starting from: €147,700 net
*Options available at additional cost, see below
Ijdpo E Dqusfx Ab Ajtg
with full 1-year warranty
Ready for delivery approx. 16 weeks after order
Technical Data:
Throughput capacity up to max. 1,200 kg/h, depending on material
(e.g. sawdust with a bulk density of 180 kg/m³)
Briquette Ø 75 mm
including 2 m press channel
Main motor power 45 kW
Feed screw gear motor 2 x 2.2 kW
Compactor screw 2 x 5.5 kW
Distribution screw 2.2 kW
Hydraulic pump motor 0.37 kW
Total connected load 65 kW
Control panel with plain text display for operating status
and load indicator for main drive and feed screws
PLC control Siemens S7/300 with hour meter in control cabinet
Machine carries CE marking
Automatic start/stop function
Dimensions 3,100 x 860 x 1,800 mm (L x W x H)
Weight 4,500 kg
Options:
Silo for MAP series (suitable only for one MAP 1200 press)
- Storage silo above the machine -
Capacity approx. 6 m³, robust steel construction with agitator discharge and fill level sensor.
€19,700 net plus VAT.
- Temperature control unit for the press tools
Ensures optimal briquette quality by maintaining required temperature. Temperature controller for pump, cooling unit, ventilator, pressure switch
Ready-wired — mandatory for operation
including corresponding control unit
€7,850 net
- Guillotine for cutting briquettes to length
Compressed air connection required on site
€6,940 net plus VAT
- Conveyor line / cooling section (nominal: 4 x 2 m)
Per 2 metres, €990 net
Installation / Commissioning (nominal for each press approx. 2–3 days onsite)
By effort, invoiced separately according to the following rates:
Service technician / mechatronics per assembly and travel hour: €129.00
Overtime: 25% surcharge
Each Saturday or night hour: 50% surcharge
Each Sunday and holiday hour: 100% surcharge
Allowance per fitter per day: country dependent
Per car and transporter km: €0.98/km
Travel and accommodation billed according to receipt or flat rate, at purchaser’s expense.
Testing with customer’s own material (by prior arrangement, up to max. 750 kg) — €1,970 net flat rate
---
Requirements for raw material:
- Moisture content (atro) must be between a minimum of 6% and a maximum of 18%
- Chip length max. 20 mm
- Installation temperature: heated area with at least +5°C
- Feeding material must be free from metals and mineral contaminants. Damage to the press tools and/or increased wear may result.
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMFP 30
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price
Another machine immediately available (ex works Neckartailfingen)
* Includes 1-year warranty.
Your advantages:
+ Very robust, straightforward technology
+ Excellent value for money
+ Suitable for continuous operation
+ Long-established, reliable machine
Includes control cabinet with timer operation
The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically.
Technical data:
Briquette dimensions: approx. 30 x 30 mm (square)
Briquette length: 5-40 mm (material-dependent)
Throughput capacity: up to 20 kg/h max. (material-dependent)
Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H)
Machine weight: approx. 250 kg
Silo capacity: approx. 250 litres
Motor: 2.2 kW, 400 V - 50 Hz
Noise emission: 62 dB
Material requirements:
Iodped Nnwlefx Ab Astg
- Wood shavings and dust smaller than 15 mm in length
- Moisture content less than 18% ATRO
- Sand, stones, metals, and minerals accelerate wear
---
Options at extra cost:
- Timer function + €490 (net)
Machine is started manually and switches off automatically after set time X.
- Fill level sensor for automatic operation + €1,450 (net)
Press starts and stops automatically
* NEW!!! Now available in 230 Volt,
Motor then 3 kW instead of 2.2 kW,
Surcharge + €890 (net) (delivery time approx. 8 weeks)
- Special pressing units + €2,950 (net)
---
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
RUFLignum Classic
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 29 h, Another machine available immediately, ex works Neckartailfingen
*Subject to prior sale
*Round silo available at additional cost
Press only deliverable with an additional plant component,
such as chipper, granulator, hammer mill, screw conveyor, belt conveyor with overbelt magnet, or extraction system
RUF briquetting press for rectangular briquettes
Very robust and established machine
The ideal machine for professional, industrial briquette sellers.
Type Classic – throughput up to 425 kg/h *material dependent
Options for an extra charge – plant engineering / mütek Systemtechnik:
- mütek Shredder MRZ size reduction technology
- Conveyor belts
- Overbelt magnets
- Extraction systems, optionally with rotary airlocks
- Screw conveyors
- Silos
- Control system integration of all types
Ijdpfxjfhql Ts Ab Aotg
- Semi-automatic packaging technology
Your benefits:
Key point:
+ Highly established, mature die-press thanks to 25 years of experience. The challenge and expertise are in the details, e.g. use of top-quality valves and cylinder seals.
+ Suitable for 24h operation
+ Long service life
+ Low maintenance costs
+ Compact design
+ High energy efficiency due to innovative hydraulics
Technical data – Briquetting press:
Throughput: up to 425 kg/h*
*depending on the bulk density of your input material
*based on a bulk density of 200 kg per cubic meter
Exact information available after successful test with your material. If no test material is provided, we cannot guarantee briquette quality or throughput.
Briquette dimensions: 150 x 60 mm
Briquette length: 40 to 105 mm (adjustable)
Hydraulic pre-compressor
Hydraulic main compressor
Pressing pressure: up to approx. 1700 kg/cm²
Hydraulic system with 260-liter oil tank
Pump motor: 30 kW / 400V / 50Hz / 3 phase
Manual control of all cylinders
Control cabinet "dust protected"
with PLC control and touch display
Total power consumption of the briquetting press: approx. 33 kW
Raw material requirements:
- Moisture content (atro) must be min. 6% to max. 15%
- Maximum chip size: 20 x 2 x 2 mm
- Ambient temperature at installation: minimum +8° C
- Material feed must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
RUFRB 220
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2001, Dobre ohranjeno, rabljeno stanje
Malo delovnih ur (1675 h)
Itodpfx Aswcc D Rjb Aeg
Motor: 11 kW
Tlak: nastavljiv do največ 250 barov
Pretok do največ 220 kg/h
Briket: 150x60 mm
Dimenzije stiskalnice: pribl. 2200x3000x1920 mm (D x Š x V)
Dimenzije krmilne omare: 500x1250x2120 mm (D x Š x V)
Teža pribl. 3000 kg
Mali oglas
Neckartailfingen
511 km
Stiskalnica za peletiranje
R 310
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2025, Requirements:
- Material must be free-flowing (less than 18 mm)
- Material must be pure, ash content less than 1% ATRO
Caution with: sand, stones, and minerals
- Compression is performed using press tongs
- Material must be dry, maximum 15% ATRO
New: Innovative combination of briquette and pellet
Options available at extra cost:
Plant engineering / mütek Systemtechnik:
- mütek Shredder MRZ size reduction technology
- Conveyor belts
- Overbelt magnets
- Extraction systems, optionally with rotary valve
- Screw conveyors
- Silos
- Control system integration of all types
- Semi-automatic packaging technology
+ 24h continuous operation possible
+ Compact design
+ High energy efficiency thanks to innovative hydraulics
+ Briquette density of up to ≥ 1 kg/l achievable *Details upon testing
Functionality:
The machine features a silo with agitator. Each of the 4 corners of the storage silo contains a vertical screw which compacts the material downward into the press chamber.
Ijdpfjfbb Arex Ab Astg
The machine operates with two cylinders, each pressing in two directions (either forward or backward movement of the cylinder). This results in 4 briquette outlets with 6 individual briquettes each.
*Ideal for automatic feeding of boilers
Format: Ø 30 mm
Throughput: up to max. 310 kg/h
Motor power: approx. 27 kW (total)
Dimensions: 3.1 x 2.3 x 2.2 m
Weight: 3.55 tons
Your advantages:
Compact briquette/pellet format allows firing of industrial combustion plants using screw conveyors
Fully automatic 24h operation possible
High energy efficiency
Briquettes/pellets with consistently high quality & density
For automatic feeding into industrial combustion plants
Small to medium quantities of wood chips originating from various processing industries (primarily wood, biomass, and more) can be optimally compacted. The small Ø 30 mm format offers an attractive alternative. Unlike conventional briquettes, these can be automatically fed into industrial combustion systems.
In addition to wood, a variety of other materials can also be processed without issue (various types of biomass & agricultural residues).
Mali oglas
Češka republika
352 km
Stiskalnica za brikete
PRODECOE60 S
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1113, skupna širina: 1.170 mm, skupna višina: 1.510 mm, skupna dolžina: 1.850 mm, premer briketa: 60 mm, skupna masa: 770 kg, Never used = As-new machine condition
Year of manufacture: 2024
Operating hours: 6!
- Option for water or oil cooling, suitable for larger or multi-shift operations (price stated without cooling)
- Sufficiently large feed hopper ensures extended work cycles without frequent material refilling
Technical specifications:
Motor power: 7.5 kW
Briquette output: 40–100 kg/h depending on material
Briquette diameter: 60 mm
Briquette length max 60 mm (so-called endless briquette)
Pressing pressure: 900 kg/cm²
Hopper diameter: 1000 mm
Dimensions: 1850 x 1170 x 1510 mm
Weight: 770 kg
Features:
Hydraulic unit: 7 pressing cycles/min
LCD Siemens touchscreen programmable control panel
Manual or fully automatic operation – PLC control – Siemens
Dual pressure gauge for improved pressure monitoring
Briquetted material level sensor
Oil level sensor
Itodpfoyh Nfhjx Ab Aeg
Preheating unit for operation in cold environments
Inspection window
Option for integration into existing production lines
Voltage: 400V – 50 Hz
Moisture content of processed material must not exceed 18%
Mali oglas
Raasdorf bei Wien
262 km
Stiskalnica za lepljenje
SchöberlVerleimständer
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, Schöberl lepilni stoj
Itsdpey Sg Ekefx Ab Aog
Višina vpenjanja: 1900 mm
Dolžina vpenjanja: 3000 mm ali več
Premičen
6 vpenjalnih elementov
Potreben prostor: 3000 x 1000 mm
Uporabljiv z obeh strani
Ogrevalno ravnilo: 3000 mm
Letnik proizvodnje: 2007
Cena: 7000 EUR, nova cena: 13 000 EUR
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Bühl
587 km
Stiskalnica za okvir - hidravlična
HYLATECHNIKHSP 40 Z (MUELLER GEFREES)
Pokliči
Stanje: rabljeno, Leto izdelave: 1982, Presskraft 40 t
Ständerweite 695 bzw. 215 mm
Hub 100 mm
Tischaufspannfläche 650 x 440 mm
Stößelfläche 580 x 285 mm
Einbauhöhe 400 mm
Gesamtleistungsbedarf 15 kW
Maschinengewicht ca. t
Abmessungen der Maschine (L x B x H): 1,63 x 1,05 x 2,61 m
Iedotqqq Rspfx Ab Astg
- mit Ziehkissen
- mit SICK-Lichtschranke
Mali oglas
Cesena
312 km
Valjčna stiskalnica za pločevino
MGM4000x6 mm CNC EVO
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: MG EVO, model krmilnika: 4axis autocalc, število valjev: 4, premer spodnjega valja: 240 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 180 mm, premer valja: 300 mm, dolžina valja: 4.100 mm, delovna širina: 4.000 mm, delovna višina: 800 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, maks. debelina pločevine iz nerjavečega jekla: 4 mm, moč: 5 kW (6,80 KM), vhodna napetost: 400 V, število digitalnih zaslonov: 4, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, model kapaciteta 4000 x 6 mm CNC EVO valjarna za pločevino
Hidravlični 4-valjni stroj za upogibanje pločevine rabljeno, letnik 2017
Itsdpfsy I Sp Tjx Ab Asg
maksimalna debelina valjane pločevine 6 mm
pred-ukrivljanje pločevine 4 mm
minimalni premer valjanja (notranji) 300 mm
maksimalna širina pločevine na valjih 4100 mm
glavni valj premer 250 mm
spodnji valj premer 240 mm
stranski valji premer 180 mm
Moč hidravlične enote 5,5 kW, napetost 400/50 – 480/60 V
Vgrajena oprema
kaljeni valji z visoko površinsko trdnostjo
valjanje stožcev, konično upogibanje
Električna krmilna konzola CNC EVO, 4 osi
avtomatski programabilni cikel z možnostjo uvoza risb iz CAD postaje
kompenzacija valjanja na osnovi podatkov o dejanski trdnosti materiala pločevine
Hidravlični pogon centralnih valjev
Paralelno delovanje 4 valjev je zagotovljeno z dolgo življenjsko dobo s torzijsko letevjo
Nastavitev pred-ukrivljanja glede na realno trdnost materiala pločevine za najboljši rezultat
Odprta prednja stran s preklopnim zaključkom za izmet zaprtih plaščev
Sistem za ponovno valjanje varjenih plaščev za natančno kalibracijo
Vgrajeni varnostni in izredni izklop
Dokumentacija: navodila za uporabo, sheme, servisna in inštrukcijska literatura
Mali oglas
Aurach
486 km
Valjčna stiskalnica za pločevino
R55
Pokliči
Stanje: dober (rabljeno), 3-valjna obodna krivilka Tip R55 Uporabna dolžina 1020 mm Največja debelina pločevine 1,25 mm V dobrem, popolnoma delujočem stanju.
Itsdpfx Ajy Rx Dcsb Asg
Mali oglas
Cantù
456 km
Rezalnik za furnir
MONGUZZI3200
Pokliči
Stanje: rabljeno, Leto izdelave: 2000, Hidravlična rezalna stiskalnica za furnir MONGUZZI mod. 3200 rabljena
teoretični uporabni rez mm. 3200
št. 2 motorja
vgrajena moč HP 10
motorno vodilo z mehanskim prikazovalnikom merjenja reza zadaj
gradbena varnostna pregrada REER (nova) za zaznavanje prsta - nivo varnosti tip 4 -
dolžina stroja mm. 4400
teža kg. 3800
stroj je obnovljen, v odličnem stanju
v skladu s CE standardom
leto izdelave 2000
Itodpfx Aboy Th Rwj Ajg
Olajšamo vam iskanje: "baioni stiskalnica za furnir"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec




































































































































































































