Axa Vsc-0-M nakup rabljenega (114.531)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.500 mm, skupna dolžina: 7.050 mm, skupna širina: 4.100 mm, volumenski pretok: 36.000 m³/h, temperatura: 80 °C, vhodna napetost: 380 V, ogrevalna zmogljivost: 250 kW (339,91 KM), Oprema: kabina, osvetlitev, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively, also available as a separate paint booth with a dedicated dryer). Here, we rely on full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating panels or wall extraction at a position of your choice. If you want to further increase the efficiency of the system beyond heat recovery and stepless control via frequency converter, we are pleased to offer you a sectional control system. This allows you, during repair painting or partial loading of the booth (for example, if you only wish to paint add-on parts), to activate exclusively the section in which the components are located. This way, you can operate with a lower air volume without sacrificing quality, thus saving energy and ultimately real money. Please contact us—we will be happy to demonstrate these options to you. Do you have any questions or suggestions? Credpfoxa H Ewex Aplsb We are gladly at your service.

Stanje: novo, Leto izdelave: 2025, skupna višina: 4.000 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, trajanje garancije: 24 meseci, temperatura: 80 °C, potreba po zraku: 36.000 m³/h, vhodna napetost: 380 V, ogrevalna zmogljivost: 345 kW (469,07 KM), moč: 40 kW (54,38 KM), gorivo: utekočinjeni naftni plin (LPG), poraba energije: 40 kWh, izolacijski material: Mineralwolle, debelina izolacije: 50 mm, nazivna moč: 345 kW (469,07 KM), Oprema: osvetlitev, MAIN SPECIFICATION Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. All processes inside the booth are managed via a PLC system, ensuring consistent adherence to set values. OPERATING PRINCIPLES OF THE BOOTH Processes inside the booth are controlled via an operator panel, which manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn from outside, passed through front filters, and directed into the plenum chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) capture paint particles, and the air passes through final exhaust filters before being released. FLASH-OFF PROCESS After painting, the booth continues to run for approximately 15 minutes to extract residual solvents and thinners. During this phase, fresh air from outside continues to circulate within the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and supplied into the booth through a distribution system. As approximately 20% of the solvent is released during drying, it is expelled together with this air. Industrial coatings are typically cured at 60°C, but booth temperature can be adjusted via the operator panel as needed. COOLING PROCESS After the 30-minute drying phase, the heating coil is deactivated from the operator panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of all machinery and equipment inside the booth. The panel is made of durable galvanized sheet metal and steel sections and is fully enclosed to protect against dust and moisture. Cjdpfx Aewzmcbsplsrb Electrical devices and control panel: • The control panel contains essential components such as circuit breakers, fuses, signal lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for the command and control connections between the control panel and motors or other electrical equipment. • Electrical wiring is designed to allow for relocation of the booth if required. • Operating equipment uses 380 V 50 Hz, while control devices use 220 V. • The booth operating time can be monitored on the electronic panel for easy maintenance tracking. • Temperature and timer settings for flash-off, intermediate drying, and final drying can be easily programmed to the required values on the electronic control panel’s digital display. • Users can monitor and adjust drying times via the heating thermostat and timer relay.

Stanje: dober (rabljeno), Leto izdelave: 2012, AXA DBZ 2/50 double-station machining center, Year of manufacture: 2012, Control: Siemens 840, Travel (X/Y/Z): 2 x 800/600/600 mm, 16-position tool changer, Tool holder: SK 50, Spindle speed up to 4,000 rpm, Milling spindle – hollow shaft motor, water-cooled, Direct measuring systems, Chip conveyor, Control cabinet heat exchanger, Oil mist lubrication, Rittal cooling unit, Cedpfx Aeridf Ujplorb

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 2300 x 1250 x 1750 mm Crsdpfx Apev Dmrvsljb Weight: 800 kg Total Power Requirement: 8.5 kW CNC Machining Center WINTER ROUTERMAX ATC 6012 PREMIUM - Working Area X-Axis: 600 mm - Working Area Y-Axis: 1200 mm - Working Area Z-Axis: 180 mm - Working Accuracy: ±0.04/300 mm - Vacuum grid table with T-slots - Vacuum pump: 2.2 kW, dry running, air-cooled - Max. Traversing Speed: 15 m/min - Max. Working Speed: 6 m/min - Working Accuracy: +/-0.2 mm - Repeatability: +/-0.02 mm - Milling Spindle: 3.2 kW, water-cooled spindle with 4 x NBT30 tool holders - Collet tool holder diameters: 2, 4, 6, 8, 10, 12 mm - Spindle Speed up to 24,000 rpm - Four-position automatic tool changer - Drive motors: AC servo motors, 750 W - Voltage: 400 V / 50 Hz - Linear guideways on X, Y, Z axes - Ball screw drive system on X, Y, Z axes - Programming language: G-code - Controller: DSP type NK 105 (optionally MACH3) - Interface: USB - CAD/CAM Software: Vectric 2D PRO - Tool length sensor - Ambient temperature: 0–45°C - Relative humidity: 30–75 % - Dimensions (L=2300 mm, W=1250 mm, H=1750 mm) - Weight: 800 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 2100 x 1250 x 1750 mm Weight 700 kg Total power requirement 8.5 kW CNC Machining Center WINTER ROUTERMAX ATC 6090 PREMIUM - Working area X-axis: 600 mm - Working area Y-axis: 900 mm - Working area Z-axis: 180 mm - Working accuracy: ±0.04/300 mm - Vacuum grid table with T-slots - Vacuum pump 2.2 kW, dry-running, air-cooled - Max. traverse speed: 15 m/min - Max. working speed: 6 m/min - Working accuracy: +/- 0.2 mm - Repeat accuracy: +/- 0.02 mm - Milling spindle: 3.2 kW, water-cooled spindle with 4 NBT30 tool holders - Collet chuck clamping diameter: 2, 4, 6, 8, 10, 12 mm - Spindle speed up to 24,000 rpm - 4-position tool changer - Drive motors: 750 W AC servo motors - Voltage: 400 V / 50 Hz Crjdpsv Dmq Sefx Aplob - Linear guides on X, Y, Z axes - Ball screw drive system on X, Y, Z axes - Programming language: G-code - Controller: DSP type NK 105 (optionally MACH3) - Interface: USB - CAD/CAM software: Vectric 2D PRO - Tool length sensor - Ambient temperature: 0-45°C - Relative humidity: 30-75% - Dimensions: L=2100, W=1250, H=1750 mm - Weight: 700 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 7000 x 2900 x 2100 mm Weight: 4,900 kg Total Power Requirement: 36 kW Crjdpfxov A E U Tj Apleb CNC Machining Center ROUTERMAX ATC 2160 ECO - Working Area X-Axis: 2,100 mm - Working Area Y-Axis: 6,000 mm - Working Area Z-Axis: 300 mm - Milling Spindle: air-cooled, 9.0 kW, ISO 30 - Spindle Speed: stepless up to 24,000 rpm - Tool Changer: 12-position, side-mounted - Drive System (X & Y Axis): rack and pinion - Drive System (Z Axis): ball screw - Travel Motors: AC servo motors, Leadshine 850 W - SHIMPO gearbox drive - Max. Traversing Speed: 45 m/min - Max. Working Speed: 20 m/min - Working Precision: 0.05 mm - Vacuum grid table with 12 zones and T-slots - 2 vacuum pumps, 11.0 kW each, air-cooled - Workpiece positioning: pneumatically retractable stops, 4 each in X and Y - Tool length sensor - CAD/CAM software: VECTRIC CUT 2D PRO (nesting included) - Control: DSP NK105 G3 - Interface: USB - Electrical connection: 3-phase 400 V, 50 Hz - Operating ambient temperature: 0–45°C - Dimensions: Width 2,900 mm - Dimensions: Length 7,000 mm - Weight: 4,900 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 6800 x 2900 x 2100 mm Weight: 4500 kg Total power requirement: 36 kW CNC Machining Center ROUTERMAX ATC 2160 DELUXE Cjdpev A E U Hjfx Aplorb - Working area X-axis: 2100 mm - Working area Y-axis: 6000 mm - Working area Z-axis: 300 mm - Routing spindle, air-cooled, HSD / Italy, 9.0 kW, ISO 30 - Spindle speed, infinitely variable: 24,000 rpm - Tool changer: 8-position traveling carousel - Drive system (X & Y axes): rack and pinion - Drive system (Z axis): ball screw - Travel motors: AC servo motors Delta / YASKAWA - SHIMPO gear drive - Max. traverse speed: 40 m/min - Max. working speed: 20 m/min - Working accuracy: 0.05 mm - Vacuum matrix table with 4 zones - BECKER dry-running, air-cooled vacuum pump, capacity 2x 250 m³/h = 500 m³/h - Workpiece positioning: pneumatically retractable stops, 2 each in X and Y - Tool length sensor - CAD/CAM software: Vectric CUT 2D PRO - Control: OSAI / Italy - Interface: Ethernet/USB/CompactFlash Card - Electrical connection: 3-phase, 400 V, 50 Hz - Operating temperature range: 0–45°C - Overall width: 2900 mm - Overall length: 6800 mm - Weight: 4500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 6000 x 2900 x 2100 mm Weight: 4500 kg Total Power Requirement: 36 kW CNC Machining Center ROUTERMAX ATC 2150 ECO - Working area X-axis: 2100 mm - Working area Y-axis: 5000 mm - Working area Z-axis: 300 mm - Milling spindle, air-cooled, 9.0 kW, ISO 30 - Spindle speed, stepless: 24,000 rpm - Tool changer: 12-position, side-mounted - Drive system (X & Y axis): rack and pinion - Drive system (Z axis): ball screw - Traverse motors: AC servo motors Leadshine 850 W - SHIMPO gear drive - Max. traverse speed: 45 m/min - Max. working speed: 20 m/min Crsdpjv A E Uyjfx Aplob - Working accuracy: 0.05 mm - Vacuum matrix table with 10 sections and T-slots - 2 vacuum pumps, 11.0 kW each, air-cooled - Workpiece positioning: Pneumatically lowering stops, 4 each on X and Y - Tool length sensor - CAD/CAM software: VECTRIC CUT 2D PRO (NESTING included) - Control system: DSP NK105 G3 - Interface: USB - Power supply: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0–45°C - Width: 2900 mm - Length: 6000 mm - Weight: 4500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 5000 x 2900 x 2100 mm Weight: 2,900 kg Total power requirement: 24 kW CNC Machining Center ROUTERMAX ATC 2140 ECO - Working area X-axis: 2,100 mm - Working area Y-axis: 4,000 mm Cedpjv A E Utefx Apljrb - Working area Z-axis: 300 mm - Milling spindle, air-cooled, 9.5 kW, ISO 30 - Spindle speed infinitely variable up to 24,000 rpm - Tool changer, 12-position, lateral - Travel system (X & Y axis): Rack and pinion drive - Travel system (Z axis): Ball screw - Travel motors: AC servo motors, Leadshine 850 W - Max. traverse speed: 45 m/min - Max. working speed: 20 m/min - Working accuracy: 0.05 mm - Vacuum grid table with 8 zones and T-slots - 2 x vacuum pumps, 5.5 kW each, air-cooled - Workpiece positioning: pneumatically retractable stops, 2 each on X and Y - Tool length sensor - CAD/CAM software: VECTRIC CUT 2D PRO (NESTING included) - Control system: DSP NK105 G3 - Interface: USB - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0-45°C - Dimensions, width: 2,900 mm - Dimensions, length: 5,000 mm - Weight: 2,900 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4000 x 2300 x 2100 mm Weight: 2300 kg Total power requirement: 21 kW CNC machining center ROUTERMAX ATC 1530 ECO - Working area X-axis: 1500 mm - Working area Y-axis: 3000 mm - Working area Z-axis: 300 mm - Milling spindle, air-cooled, 9.5 kW, ISO 30 - Spindle speed, infinitely variable: 24,000 rpm - Tool changer, 12-position, side-mounted - Drive system (X & Y axes): Rack and pinion drive - Drive system (Z axis): Ball screw - Drive motors: AC servo motors, Leadshine 850 W - Max. traverse speed: 45 m/min - Max. working speed: 20 m/min - Working accuracy: 0.05 mm - Vacuum grid table with 6 zones and T-slots - Vacuum pump 7.5 kW, air-cooled - Workpiece positioning: Pneumatically retractable stops, 2 each on X and Y axes - Tool length sensor - CAD/CAM software: VECTRIC CUT 2D PRO (nesting included) - Control: DSP NK105 G3 - Interface: USB - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0-45°C - Width: 2300 mm - Length: 4000 mm Codpfxsv A E Tvo Aplorb - Weight: 2300 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 3800x2300x2100 mm Weight: 2000 kg Total power requirement: 19 kW CNC Machining Center ROUTERMAX ATC 1530 DELUXE - Working area X-axis: 1500 mm - Working area Y-axis: 3000 mm - Working area Z-axis: 300 mm - Milling spindle, air-cooled, HITECO / Italy, 9.5 kW, HSK 63F - Infinitely variable spindle speed: 24,000 rpm - 8-position tool changer, side-mounted - Drive system (X & Y axis): rack and pinion - Drive system (Z axis): ball screw - Drive motors: AC servo motors Delta / YASKAWA - SHIMPO gearbox drive - Max. traverse speed: 40 m/min - Max. working speed: 20 m/min - Working accuracy: 0.05 mm Cjdpov A E Tpjfx Apljrb - Vacuum matrix table with 4 zones and T-slots - BECKER vacuum pump, oil-free, air-cooled, capacity 129 m³/h - Pneumatic workpiece positioning stops, retractable: 2 in X, 2 in Y - Tool length sensor - CAD/CAM software VECTRIC 2D PRO (NESTING included) - Safety light curtain according to EN 848-3 (optional, depending on local installation conditions) - OSAI control system / Italy - Interfaces: Ethernet/USB/CompactFlash Card - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0–45°C - Dimensions width: 2300 mm - Dimensions length: 3800 mm - Weight: 2000 kg

Stanje: rabljeno, Used 3D printer EOSINT M 270, low operating hours (4,910) Crodpjwd Ulvefx Aplsb

Stanje: rabljeno, prva registracija: 10/2011, Leto izdelave: 2011, M&V 902 Podvozje za kontejnerje High Cube izvlečno ● ABS ● Zračno vzmetenje ● Dvižna os ● Sistem dviganja/spuščanja ● 3 x SAF osi z diskastimi zavorami ● Pnevmatike: 385/55 R 22.5 ● Sprejem kontejnerjev: 20 ft / 2 x 20 ft / 1 x 30 ft / 1 x 40 ft ● Skupna masa: 39.000 kg Cedpfx Apox Nc D Delsrb ● Lastna masa: 6.300 kg ● Nosilnost: 32.700 kg !! Izvlečen zadaj in na sredini !! - Nemška polprikolica - TÜV / tehnični pregled: na zahtevo in za doplačilo: NOVO! Pridržujemo si pravico do napak in predhodne prodaje! = Dodatne informacije = Za več informacij kontaktirajte Joannis Arpantzanis ali Kai Bühler.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 41.795 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.760 mm, pomik osi Y: 600 mm, pomik po osi Z: 800 mm, model krmilnika: Siemens 840 D ShopMill, največja hitrost vrtenja: 6.000 obr/min, Vodilna drsna obloga osnovnega vozička X/Y je bila leta 2022 obnovljena! TEHNIČNI PODATKI Pomik X-os: 1.760 mm Pomik Y-os: 600 mm Pomik Z-os: 800 mm horizontalno Pomik Z-os: 770 mm vertikalno A-os: ±100° Premer čelne plošče: 520 mm Hitri pomik X/Y/Z: 40/40/30 m/min Število krmiljenih osi: 5 Območje vrtljajev: 30 - 6.000 vrt/min Pogonska moč: 30 kW Navor: 143 Nm Orodni držalo: SK 40 Število orodnih mest: 36 PODROBNOSTI O STROJU Krmiljenje: Siemens 840 D ShopMill Dimenzije in teža Tloris (D x Š x V): 5,2 x 3,4 x 3,3 m Teža stroja: 12.000 kg Delovne ure: 41.795 h Credpfjyfriajx Aplob OPREMA NC rotacijska miza AXA RTA 4L-520 Ročni konjiček, višina konice 280 mm Notranje hlajenje (IKZ): 30 bar Odvajanje ostružkov levo Integriran rezervoar za hladilno tekočino 200 l Rezervoar za hladilno tekočino 400 l 3D merilna sonda Renishaw RMP 60 z RMI sprejemnikom Neposreden merilni sistem Heidenhain Kaljene ravne vodila Protikrmilna vodila obložena z drsno oblogo (Turcite)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Potpuno automatska linearna PET mašina za duvanje Potpuni servo pogon 4 kalupa do 2000 ml Credpfjwrrcnsx Apleb Kapacitet duvanja: 4000 flaša na sat (novi uređaj) Niska potrošnja energije

Stanje: novo, TECHNICAL DATA: - Base area: 10,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: chipboard, 38 mm, P6 raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanine floors can be extended in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Flooring - Fastening material Price examples: 30 m² | Area: 5,000 x 6,000 mm | €2,685.00 net, plus transport costs and VAT 60 m² | Area: 5,000 x 12,000 mm | €4,785.00 net, plus transport costs and VAT 90 m² | Area: 5,000 x 18,000 mm | €6,855.00 net, plus transport costs and VAT 120 m² | Area: 5,000 x 24,000 mm | €8,955.00 net, plus transport costs and VAT 60 m² | Area: 10,000 x 6,000 mm | €4,785.00 net, plus transport costs and VAT 120 m² | Area: 10,000 x 12,000 mm | €8,645.00 net, plus transport costs and VAT 180 m² | Area: 10,000 x 18,000 mm | €12,495.00 net, plus transport costs and VAT 240 m² | Area: 10,000 x 24,000 mm | €16,335.00 net, plus transport costs and VAT Further variants available. Please contact us for details. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal braces instead of cross bracing available at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMISED PLANNING & PRODUCTION This mezzanine system is an example from our standard range. Naturally, we develop and manufacture your mezzanine floor exactly according to your operational requirements – tailored to area, load capacity, installation height, and intended application. Based on your requirements, our planning department will provide you with a customised, non-binding quotation. Whether you need new construction, an extension, or the modernisation of existing equipment, we support you with expert knowledge and practical solutions. TRANSPORT & INSTALLATION We will be happy to assist you with transport and installation. This item is available for collection. Delivery or shipping can be arranged at extra cost. Additional costs depend on the delivery location and the scope of delivery and can be provided upon request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The price stated is per unit/net price as indicated in the product description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for commerce, industry, and the trades. We constantly have attractive offers for used equipment from various manufacturers/brands. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success factors at DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions Cjdpfx Ajxpizaoplsrb

Stanje: novo, TECHNICAL DATA: - Base area: 15,000 x 20,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm [adjustable] - Flooring: 38 mm chipboard, P6 raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights are available upon request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Flooring - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus shipping and VAT. 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus shipping and VAT. 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus shipping and VAT. 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus shipping and VAT. 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus shipping and VAT. 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus shipping and VAT. 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus shipping and VAT. 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus shipping and VAT. 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus shipping and VAT. 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus shipping and VAT. Further variants available on request. Optional accessories: - Handrail - Flush wall connection Codpfx Ajxpic Replerb - Staircase - Transfer station - Impact protection - Diagonal braces instead of bracing crosses, at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipment is possible for an additional charge. The additional costs depend on the delivery location and the scope of the shipment and can be requested from us individually. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is to be understood as a unit/net price unless otherwise stated (plus VAT). You will receive an invoice with VAT shown. ABOUT US DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at favourable conditions. Should you have any further questions, please feel free to contact us. Four times the success – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Stanje: novo, TECHNICAL DATA: - Base Area: 20,000 x 15,000 mm [other variants available] - Grid Pattern: 5,000 x 5,000 mm - Top Edge of Flooring: 3,340 mm - Clearance Height: 3,000 mm [adjustable] - Flooring: 38 mm particleboard, P6 raw/white - Load Capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: new The platforms can be extended as standard in the specified grid sizes. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: Crsdpfx Apsxpii Releb - Support columns - Main and secondary beams - Cross-bracing - Flooring - Fastening materials Price examples: 25 m² | Area: 5,000 x 5,000 mm | €2,445.00 net, plus shipping and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,335.00 net, plus shipping and VAT 75 m² | Area: 5,000 x 15,000 mm | €6,170.00 net, plus shipping and VAT 100 m² | Area: 5,000 x 20,000 mm | €8,035.00 net, plus shipping and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,945.00 net, plus shipping and VAT 150 m² | Area: 10,000 x 15,000 mm | €11,415.00 net, plus shipping and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,985.00 net, plus shipping and VAT 300 m² | Area: 20,000 x 15,000 mm | €21,425.00 net, plus shipping and VAT 400 m² | Area: 20,000 x 20,000 mm | €28,155.00 net, plus shipping and VAT 500 m² | Area: 20,000 x 25,000 mm | €33,935.00 net, plus shipping and VAT Further variants available Optional accessories: - Guard railings - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal supports instead of cross-bracing (at extra cost) YOUR CONTACT PARTNERS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL DESIGN & CUSTOM MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, overall height, and intended application. Our planning department will prepare an individual, non-binding offer based on your specifications. Whether for new construction, expansion, or modernization of existing systems – we support you with professional expertise and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of your equipment. Collection is possible. Delivery or dispatch is available at an additional cost. Extra charges depend on delivery location and shipment size and can be individually requested from us. PAYMENT TERMS Payment terms to be agreed in the event of an order. The price is per unit/net price or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ✅ Four ways to win – the success modules of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Stanje: novo, TECHNICAL DATA: - Footprint: 16,000 x 20,000 mm [other options available] - Grid spacing: 4,000 x 5,000 mm - Finished floor level: 3,340 mm - Clear height: 3,000 mm [customizable] - Floor covering: chipboard 38 mm P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: new Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Flooring - Fastening materials PRICE EXAMPLES: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,135.00 net, plus shipping and VAT 40 m² | Dimensions: 4,000 x 10,000 mm | €3,825.00 net, plus shipping and VAT 60 m² | Dimensions: 4,000 x 15,000 mm | €5,435.00 net, plus shipping and VAT 80 m² | Dimensions: 4,000 x 20,000 mm | €7,215.00 net, plus shipping and VAT 40 m² | Dimensions: 8,000 x 5,000 mm | €3,725.00 net, plus shipping and VAT 80 m² | Dimensions: 8,000 x 10,000 mm | €6,519.00 net, plus shipping and VAT 120 m² | Dimensions: 8,000 x 15,000 mm | €9,695.00 net, plus shipping and VAT 160 m² | Dimensions: 8,000 x 20,000 mm | €12,755.00 net, plus shipping and VAT Credpsxpha Iefx Apljb 120 m² | Dimensions: 10,000 x 12,000 mm | €8,995.00 net, plus shipping and VAT 80 m² | Dimensions: 16,000 x 5,000 mm | €6,785.00 net, plus shipping and VAT 160 m² | Dimensions: 16,000 x 10,000 mm | €12,472.00 net, plus shipping and VAT 240 m² | Dimensions: 16,000 x 15,000 mm | €18,108.00 net, plus shipping and VAT 320 m² | Dimensions: 16,000 x 20,000 mm | €23,565.00 net, plus shipping and VAT Optional accessories: - Handrail - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal bracing instead of cross bracing available at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system serves as an example from our standard range. We are happy to design and manufacture your storage platform exactly according to your operational requirements – tailored to surface area, load capacity, installation height, and intended application. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly. This item is available for collection. Delivery or shipping is possible at extra cost. Additional charges depend on the delivery location and the scope of the shipment and can be quoted individually on request. PAYMENT TERMS Payment terms will be negotiated upon order. All prices are quoted per piece/net as specified (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US DLK in Nordhorn deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. ✅ Four factors for success – The key modules from DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Stanje: novo, Leto izdelave: 2025, Laserski vir: Raycus ali Max: 4/6/8/12 kW Laserska glava: 3D BOCI Krmilni sistem: FSCUT 5000 A Vpenjalna glava: 20–450 mm Nakladanje/razkladanje: 12000 mm X-/Y-os Csdpfx Apji Apfzslorb Natančnost pozicioniranja: ±0,05/1000 mm Ponovljivost: ±0,03/1000 mm Pospešek: 0,8g (m/s²) Rotacijska hitrost: 60 obr/min Maks. pozicionirna hitrost: 60 m/min Maks. teža cevi: 1500 kg 1. Raycus 6000W laserski vir 2. Ozobljena (bevel) laserska glava 3. Varjen okvir DPL 4. Schneider električni elementi 5. Poševno zobati letev KH 6. Reducir Techmech 7. Yaskawa servomotor 8. Vodila SHAC 9. Integrirano krmiljenje napajanja 10. Programska oprema FScut 5000 11. Integrirana električna omara 12. HANLI hladilnik vode 13. Konzolna MOSTNA os-X FHBS 14. Avtomatsko zbiranje odpadkov 15. Gosenični avtomatski zbiralnik obdelovancev 16. Avtomatski podpornik 17. Okvir za nalaganje 12000 mm 18. Okvir za razlaganje 12000 mm

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 7000 x 2300 x 2100 mm Weight: 3200 kg Total Power Requirement: 28 kW CNC Machining Center ROUTERMAX ATC 1530 ECO DWT - X-Axis Working Area: 1500 mm - Y-Axis Working Area: 3000 mm x 2 - Z-Axis Working Area: 300 mm - Double Work Table: 1500 x 3000 mm (pendulum operation) - Milling Spindle, air-cooled, 9.5 kW, ISO 30 - Spindle Speed, infinitely variable: 24,000 rpm - Tool Changer: 12-position, traveling type - Drive System (X & Y Axes): rack and pinion - Drive System (Z Axis): ball screw - Travel Motors: Leadshine AC servo motors, 850 W - Max. Traversing Speed: 45 m/min - Max. Working Speed: 20 m/min - Working Accuracy: 0.05 mm - Vacuum matrix table with 6 zones and T-slots - 2 x vacuum pumps, 7.5 kW / 250 m³ each, air-cooled - Workpiece positioning: pneumatically retractable stops, 2 on X and 3 on Y - Tool length sensor - CAD/CAM software: VECTRIC CUT 2D PRO (including nesting module) - Controller: DSP NK105 G3 - Interface: USB - Power connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0-45°C - Overall width: 2300 mm - Overall length: 7000 mm - Weight: 3200 kg Crodjv A E T Aopfx Aplsb

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 7000 x 2900 x 2100 mm Weight: 4500 kg Total power requirement: 35 kW CNC Machining Centre ROUTERMAX ATC 2130 ECO DWT - Working area X-axis: 2100 mm - Working area Y-axis: 3000 mm - Working area Z-axis: 300 mm - Double work table 2100 x 3000 mm (pendulum operation) - Milling spindle, air-cooled, 9.5 kW, ISO 30 - Spindle speed steplessly adjustable up to 24,000 rpm - 12-position tool changer, travelling - Drive system (X & Y axis): rack and pinion - Drive system (Z axis): ball screw - Drive motors: AC servo motors Leadshine 850 W - Max. traverse speed: 45 m/min Crodjv A E Ugepfx Apljb - Max. working speed: 20 m/min - Working accuracy: 0.05 mm - Vacuum matrix table with 12 zones and T-slots - 2 units vacuum pump, 11.0 kW each, air-cooled - Workpiece positioning: pneumatically retractable stops, 2 per X axis, 3 per Y axis - Tool length sensor - CAD/CAM software: VECTRIC CUT 2D PRO (nesting included) - Controller: DSP NK105 G3 - USB interface - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0–45°C - Width: 2900 mm - Length: 7000 mm - Weight: 4500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 3800 x 2900 x 2100 mm Weight: 2500 kg Total connected load: 28 kW CNC Machining Center ROUTERMAX ATC 2130 DELUXE - Working area X-axis: 2100 mm - Working area Y-axis: 3000 mm - Working area Z-axis: 300 mm - Milling spindle: HITECO/Italy, air-cooled, 9.5 kW, HSK 63 F - Spindle speed: infinitely variable up to 24,000 rpm - Tool changer: 8-position carousel, gantry-mounted Codpfsv A E T Njx Apljrb - Drive system (X & Y axes): Rack and pinion - Drive system (Z axis): Ball screw - Travel motors: AC servo motors Delta / YASKAWA - SHIMPO gear drive - Max. traverse speed: 40 m/min - Max. working speed: 20 m/min - Working accuracy: 0.05 mm - Vacuum grid table with 4 zones - BECKER vacuum pump, dry-running, air-cooled, capacity 2x129 m³/h = 258 m³/h - Workpiece positioning: Pneumatically retractable stops, two each in X and Y - Tool length sensor - CAD/CAM software: VECTRIC CUT 2D PRO (includes nesting) - Control system: OSAI / Italy - Interface: Ethernet / USB / CompactFlash card - Power supply: 3-phase 400 V, 50 Hz - Operating temperature range: 0–45°C - Overall width: 2900 mm - Overall length: 3800 mm - Weight: 2500 kg

Stanje: novo, Leto izdelave: 2025, skupna višina: 982 mm, skupna dolžina: 4.000 mm, skupna širina: 1.100 mm, volumenski pretok: 18.000 m³/h, trajanje garancije: 12 meseci, Suction wall with 18,000 m³/h MAX power consumption 5 kW/h Electric motor 4 kW Crsdpfjwz Ic Nox Aplsb Air unit 18,000 m³/h Nicotra ADH 400 The full description can be found in the attachment to this listing.

Stanje: novo, Oprema: kabina, Stationary small parts spray booth Dixi █████ Coating small parts perfectly & evenly. The extraction system ensures perfect results in the smallest spaces. Optionally equipped with a turntable or wheel mount, as well as a compact yet powerful extraction unit, it is ideally suited for processing small workpieces and rims. The side walls effectively limit overspray distribution, allowing work to be carried out in confined spaces without contaminating adjacent areas. Additionally, integrated lighting can be installed. Thanks to its low weight and minimal connection requirements, it can be relocated to a new site in a very short time, maintaining your operational flexibility at all times. The system is delivered fully pre-assembled and Crsdpfexa Hx Rox Apljb Your benefits Thanks to its compact design, flexible dimensions and adaptable accessories, a wide range of applications is possible without any issues. The sophisticated modular system requires little space, making it suitable for use in all types of rooms. The various filter media and filter stages ensure highly efficient operation and make filter changes a matter of just a few minutes. Application and safety Processing both water-based and solvent-based coatings is guaranteed thanks to the use of ATEX-approved explosion-proof motors. Optionally also suitable for glue spraying. The large filter surface ensures uniform extraction.