Turbo Drobilnik Mtr-800 nakup rabljenega (10.468)

Stanje: dober (rabljeno), Lesni drobilnik na prodaj Pripravljen za transport s transportnim trakom Idealen za drobljenje ostankov lesa (vse vrste mehkega lesa) in palet Vključno s hidravličnim potisnikom Motor: 7,5 kW Širina rotorja: cca 82 cm Teža: 1.460 kilogramov Lodpfexbyx Tex Al Ijab Polna obremenitvena toka: 32 A Predvarovalka: 35 A

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + special rotor, designed with reduced knife protrusion for processing both hard and soft materials + 22 kW motor + effective square knives *For pallets: up to a maximum of 10 pallets per hour (output depends on screen and material). Significantly higher throughput possible for smaller wood residue. Motor: 22 kW; 400 V - 50 Hz - 3 phase Ljdpfx Aex Af Rdol Isab Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *interchangeable Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC controller - Automatic star/delta start - High-speed hydraulics - Automatic stop when rotor idles - 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing incremental control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled discharge conveyor (discharge height approx. 220 cm) + €12,980 net - Over-belt magnet + €5,980 net - Control for conveyor and over-belt magnet + €2,750 net (Start/stop synchronised with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral contaminants. Damage to the tools and/or increased wear may result otherwise.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Ledpfxedwktko Al Ijab Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine with special rotor available immediately Advantages: + special rotor with reduced knife overhang + 22 kW motor + efficient square knives *For pallets: up to 10 pallets per hour *Depending on screen and material. Significantly more for smaller wood off-cuts. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm Hydraulically operated pusher Screen perforation currently (15/20 mm) *can be exchanged Suction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Plant color may vary Weight: 1920 kg Standard features: - Control cabinet with PLC control - Automatic star/delta start-up - Fast hydraulics - Automatic shut-off when rotor runs idle - Rotational speed 70-90 rpm for high throughput - Cycle control to avoid idle times Ljdpfx Asdv Eu Hel Ioab - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *See last 2 images. - Additional knife row + €2,790 - Segment floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (May be considered for plastic shredding with screens smaller than 15 mm or high fine proportion. Not required if lubricating the bearings with grease every 4 weeks in operation) - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Feed material must be free from metals and mineral impurities. Damage to the tools and/or increased wear may otherwise result.

Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Ljdpfx Ajd E R D Sel Isab Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional blade row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (Prevents the pusher from jamming. Recommended for material thickness less than 3 mm) - Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (synchronized start/stop with the shredder) - Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation) . Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. . We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.

Stanje: novo, Leto izdelave: 2024, Production time approx. +/- 4 months. The ideal machine, for example, for shredding pallets and wood waste. * prepared for extraction, see pictures 4 and 5 without additional accessories such as -exhibited hopper or -conveyor belt cutout Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knives: 76 pieces, reversible multiple times Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Ledpfxed Hkqhs Al Isab Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 cbm Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard equipment includes: - V-rotor for maximum throughput - 2nd row of knives on rotor - Control cabinet with Siemens PLC control system - Automatic star/delta start - Fast hydraulic system - Automatic shutdown when rotor is idling - Rotation speed 70-90 rpm for high throughput - Cycle control to avoid idle time - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF, other materials upon testing and approval by the manufacturer. Requirements for raw material: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: 0-250-84-4817, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 4.300 mm, pomik osi Y: 2.250 mm, pomik po osi Z: 400 mm, dolžina obdelovanca (maks.): 4.300 mm, širina obdelovanca (maks.): 2.250 mm, proizvajalec krmilnikov: HOMATIC, skupna višina: 2.800 mm, dolžina mize: 4.300 mm, širina mize: 2.250 mm, model krmilnika: PC86 PowerControl, moč vretenovega motorja: 12.000 W, Oprema: dokumentacija / priročnik, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machine Year of manufacture: 2019 IMPORTANT: Available from week 42/43, 2026 Operating hours: 7,840 h (main use) / 2,420 h (secondary use) Parts counter: 28,661 Status as of 13.01.2026 Maximum workpiece dimensions: Lsdey Sv I Uepfx Al Isab • X-axis: 4,300 mm • Y-axis: 2,250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm SPECIFICATION / CONFIGURATION MATRIX-PRO machining table, size 4,300 x 2,250 mm - 4 pneumatically lowerable stops with electronic position detection - 3 vacuum pumps, capacity each 290/345 m3/h at 50/60 Hz, total 870/1035 m3/h - 2 separable vacuum zones, each 2,150 x 2,250 mm - 3 safety/anti-slip mats, safety fence with door - Main spindle 11 kW, 24,000 rpm, liquid-cooled - Spindle with C-axis interface - Tool holder/clamping system HSK F63 - SENSO-FLEX probe system, controllable in Z direction - Vertical drilling unit with 21 spindles, drive power 2.3 kW - 2 x 14-position tool changers (carousel), 1 at the front and 1 at the rear 1 ROLLER TABLE for panel transport 7,080 x 2,200 mm Control / Software: - PowerControl PC86 power touch - WoodWop 7.1 Machine dimensions: 11.60 x 4.50 x 2.80 m The machine can still be inspected in operation Available: from September 2026 (approx. week 37)

Leto izdelave: 2005, stanje: rabljeno, številka stroja/vozila: 15-230068, Z digitalnim zaslonom Lajdpfjy Sqkqsx Al Isb

Stanje: rabljeno, HERBOLD PU800 fine grinding mills Suitable for soft to medium-hard materials Previously used for fine grinding plastics Grinding disc diameter: 800 mm Drive motor: 90 kW Ljdpfx Asy Tihkjl Isab

Stanje: rabljeno, Twin-shaft shredder Lodpfxsy Th Nae Al Ijab Drive power: 37.50 kW

Stanje: rabljeno, Leto izdelave: 1965, x-travel 700 mm y-travel 350 mm z-travel 450 mm Clamping surface of table: 940 x 510 mm Spindle taper: SK 40 Spindle speeds: 32 - 1600 rpm Feeds – longitudinal & cross: 8 - 400 mm/min Feeds – vertical: 4 - 200 mm/min Total power requirement: 4.5 kW Machine dimensions (L x W x H): 1.85 x 1.62 x 1.83 m Accessories: swivel-type vertical head with extendable quill, universal table, counter bearing, coolant device Lajdpfx Alovzhh Te Isb

Stanje: novo, Še zelo dobro ohranjen štiriosni drobilnik s samo 1200 delovnimi urami. Letnik 1998. Opremljen z 2 motorjema po 7,5 kW. Laodpfx Ajy T Hbusl Isb

Stanje: dober (rabljeno), Leto izdelave: 2012, Pogonski stroj počasnega teka s potisnim dnom. Širina rotorja: 830 mm. Velik rotor z 38 noži. Velikost nožev: 40 x 40 mm. Motor 22 kW. Premer sita: 25 mm. Ledpfx Aljy T Ef Ej Ieab

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 120 h, Funkcionalnost: popolnoma funkcionalen, The Red Rhino 7000 is a mobile (mini) jaw crusher – essentially a self-contained, portable crusher that reduces material using a fixed and a movable jaw. - Crushing principle: Jaw crusher – large, wear-resistant manganese steel jaws. - Feed opening: approx. 700 mm × 400 mm – this is the maximum material size the crusher can accept at once. - Capacity: up to approx. 45 tonnes/hour (depending on material quality). - Power: Diesel engine (e.g. Deutz, approx. 66–70 HP, actual engine may vary by model). - Output size: adjustable from coarse to fine (e.g. 10–120 mm), allowing for variable grain sizes of the crushed material. - Mobility: Tracked or rubber-wheeled chassis → easily maneuverable on site. - Controls: often via radio remote control. Lsdpfx Aljy It Tgj Ieab What is it used for? - Crushing construction debris - On-site reduction of concrete, reinforced concrete, bricks and stones for reuse or easier handling - Recycling

Stanje: novo, Leto izdelave: 2025, Weima enogredni drobilnik Tip: WL 4 Premer rotorja: 260 mm Širina rotorja: 600 mm Samočistilni lijak Logspaser (600x1050mm) Moč motorja: 18,5 kW Dvojna vrstica nožev z 28 kosi Lasdpfxexwyx Se Al Ijb Teža: 1300 kg Sesalni priključek: 160 mm Vključno z vijačeno sesalno posodo. Velikost perforacije sita: 15 / 20 mm (ali po dogovoru) Skladiščni stroj takoj na voljo. Cena iz skladišča Rosenheim, brez dostave.

Stanje: rabljeno, Leto izdelave: 2003, Crushes bottles by pressing them. - High crushing capacity - Significant volume reduction - Accident-proof (shatter-protected) - Low noise emission [85/87 dB(A)] - Low wear rate - Compact design (minimal space requirements) Machine (additional info): Bottle Crushing Plant Conti Crushing capacity: 6,000 bottles/hour with feed conveyor Current: 6.5 A Voltage: 380V Frequency: 50Hz Lajdpfxjvcqhxs Al Iob Length: 1,520 mm Width: 1,300 mm Height: 2,600 mm Base construction: On domed feet Equipment: Cullet collection tray, noise protection enclosure, feed chute for manual disposal of individual bottles Weight: 700 kg

Stanje: rabljeno, prevoženi kilometri: 46.361 km, moč: 100 kW (135,96 KM), prva registracija: 12/1987, vrsta goriva: dizel, skupna masa: 7.500 kg, barva: zelen, vrsta prenosa: mehanski, število sedežev: 3, skupna dolžina: 5.735 mm, skupna širina: 2.345 mm, skupna višina: 3.010 mm, Oprema: pogon na vsa štiri kolesa, Napake in vmesna prodaja pridržane! Interna številka: 1446. W144673 ---- OPREMA Bivše vojaško reševalno vozilo Bundeswehr Pogon na vsa štiri kolesa z zaporami Dvojni sovoznikov sedež Dovoljeno največja masa 7500KG Masa vozila (prazno) 6260KG... in še veliko več. ---- Vozilo ni pripravljeno! Dostava po vsej državi možna za doplačilo. Napake in vmesna prodaja pridržane. Laodey Tgcljpfx Al Ijb Vaše vozilo z veseljem vzamemo v račun. Financiranje / leasing možno tudi brez pologa! Imate še kakšno vprašanje? Z veseljem vam svetujemo!

Leto izdelave: 2016, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prodajam popolnoma delujoč kladivni drobilnik znamke ROBEX - DPH22KRL s tračnim transporterjem. Letnik izdelave: 2016. Moč motorja drobilnika: 22 kW. Lsdpjy Rz Rlsfx Al Ioab

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, injekcijska masa: 2.452 g, Ta Krauss Maffei KM 800-6100MX je bila izdelana leta 2007. Ima zapiralno silo 8000 kN in vbrizgalni volumen 2695 cm³, zaradi česar je primerna za različne materiale kot so PA, PP, PE in ABS. Stroj je opremljen z robotskim sistemom Wittmann, ki izboljšuje možnosti rokovanja. Če iščete kakovosten brizgalni stroj, razmislite o hidravličnem brizgalnem stroju KM 800-6100MX podjetja Krauss Maffei, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Vbrizgalna enota: 6100 • Vbrizgalni volumen: 2695 cm³ • Vbrizgalni tlak: 2242 bar • Predelovani materiali: PA, PP, PE, ABS ipd. Lajdpfx Aoyyxc Dol Iob • Temperatura cilindra: do 450°C • Razpoložljivost: začetek leta 2027 Dodatna oprema • Ravnanje: Wittmann robotski sistem • Model: W743 • Moč: 400 V, 18 A / 12,5 kVA • Hodi osi: X 1200 mm, Y 2000 mm, Z 4000 mm

Stanje: rabljeno, Dolžina rotorja: 1.000 mm Lodpfx Ajy Spvxsl Isab Motor: 30 kW Sito: 10 mm Eno-gredni drobilnik Weima tip WL 10 za učinkovito drobljenje lesnih odpadkov, ostankov plošč, palet in masivnega lesa. Robusten stroj je primeren za predelavo odpadnega lesa v mizarskih delavnicah, lesnopredelovalni industriji in reciklažnih obratih. Vključuje velik lijak za enostavno polnjenje in začasno shranjevanje.

Stanje: rabljeno, prevoženi kilometri: 168.355 km, moč: 375 kW (509,86 KM), prva registracija: 01/2025, vrsta goriva: dizel, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 01/2027, barva: črn, vrsta prenosa: samodejen, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, VOLVO FH500 AERO Turbo-Compound 4X2 Standard Tractor Unit, Full Air Suspension First Registration: 01/2025 Mileage: 168,355 km Condition: Like New Globetrotter XL Safety Cab, cab air suspension, Comfort Package, Electric Package, Extended Living Package, two bunks, I-Park Cool stationary air conditioning, leather comfort driver’s seat (heated & ventilated), co-driver’s seat rotatable and tiltable, camera monitor system with close-range camera, 220 V power socket, stainless steel microwave. 12.8 L diesel engine, turbo-compound charger, 510 hp / 375 kW, 2,856 Nm torque. Reinforced Volvo Engine Brake+. I-Shift 12-speed transmission, I-See with map-based topography and traffic info. PTO on gearbox, max output 600 Nm. Wheelbase: 3,800 mm. Full air suspension with lifting and lowering function. Lsdpfx Ajy Sdxhjl Isab Three ride heights for air suspension. Tyres: Front axle: 385/55 R 22.5, tread depth 9 mm Rear axle: 315/70 R 22.5, tread depth 9 mm Fifth wheel height: 1,150 mm Steel rims, black high-gloss finish Dual battery system Fuel-saving package 650 L & 365 L fuel tanks AdBlue tank: 99 L Extended safety package with active lane keeping, Volvo Dynamic Steering, all available safety systems, full LED lighting, 5x LED work lights Complete aerodynamic kit, including side skirts between the axles NATO socket RENTING is the new BUYING – also available through us as full-service or lease-purchase.

Stanje: rabljeno, Leto izdelave: 1987, Širina materiala 800 mm Debelina materiala 0,4 - 2,5 mm Ledpfx Aey Ruttsl Ieab Število ravnalnih valjev 8 Premer ravnalnih valjev 53 mm Število vlekalnih valjev 2 Premer vlekalnih valjev 160 mm Debelina materiala pri širini materiala 800 mm (inox) 0,6 mm Debelina materiala pri širini materiala 800 mm (jeklo) 1,0 mm Debelina materiala pri širini materiala 150 mm (inox) 2,5 mm Presek materiala 975 mm² Hitrost - 35 m/min Pogonska moč 2,1 kW Teža 7,0 t Prostorska zahteva (ŠxGxV) 2,0 x 2,0 x 2,3 m Ravnalni stroj RM 8-53/160-800 z brezstopenjsko nastavljivim pogonom, pogon ravnalnih valjev, podporni valji, hidravlično dvigljiva ravnalna glava, motorizirana nastavitev valjev, hidravlični uvajalni klin, bočno vodenje traku pri vhodu.

Stanje: rabljeno, Leto izdelave: 1990, Tlak 50 t Razdalja med stebri 800 mm Hod 4 - 60 mm Število hodov 30 - 300 hod/min Vgradna višina (hod + nastavitev bata zgoraj) 400 mm Stranski prehod med stebri 350 mm Delovna miza 780 x 640 mm Prebojna odprtina v mizi 690 x 140 mm Višina mize nad tlemi 1150 mm Ljdpfx Alovut Huo Ieab Površina bata 800 x 460 mm Pogonska moč 26,0 kW Teža stroja cca 9,00 t Prostorske zahteve cca 2,4 x 1,7 x 2,9 m Nastavitev bata 80 mm S kontinuiranoregulatiranim pogonom, avtomatsko nastavitvijo hoda, elektronskim valjčnim podajalnikom (PBK, WV 65-DSM 300P, l. 2007)

Stanje: novo, Condition: New Delivery time: approx. 2 - 4 weeks from order Country of origin: Germany Price: €3303.85 Drilling capacity in structural steel: 6 mm Mount: B12 Throat: 220 mm Speeds: 100 - 10,000 rpm Motor: 0.54 kW Tapping capacity: M5 Length: 452 mm Width: 700 mm Height: 1130 mm Weight: 44 kg Quill stroke: 60 mm Distance spindle - table: 140 - 315 mm Table: 300 x 250 mm Lodpfx Asy Hf Rhsl Isab Column diameter: 70 mm Continuous/normal drilling capacity: 6/8 (in E335/ST60) Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quick-adjustable and ergonomic drilling depth stop Infinitely variable speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill guard with electrical interlock Connection cable with Schuko plug 3-year warranty for single-shift operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package 2 (vice & quick-release drill chuck)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 850 h, številka stroja/vozila: 175917923190, For sale is a Manitou MRT 1840 Easy Turbo rotating telehandler from the year 2010, with only approx. 850 operating hours. This machine is highly versatile and ideally suited for construction sites, industrial use, assembly work, warehouse construction, and material handling. The Manitou MRT 1840 offers a maximum lifting capacity of 4,000 kg and a lift height of approx. 18 m. Thanks to its 360-degree rotating upper carriage, this telehandler provides exceptional flexibility, making it perfect for applications where reach, height, and precise positioning are essential. A particular highlight is the very low operating hours—approximately 850—which is an impressive value for a machine in this class. The photos also show a radio remote control, which further enhances operator convenience. The machine presents itself in visually good condition. The cab appears clean and well-maintained, with the seat and controls in good shape. Overall, this is a robust, professional rotary telehandler with a wide range of applications. Technical Data Manufacturer: Manitou Model: MRT 1840 Easy Turbo Type: Rotating Telehandler Year of manufacture: 2010 Serial Number: 759179 Vehicle Identification No.: 175917923190 Operating hours: approx. 850 h Lifting capacity: 4,000 kg Lifting height: approx. 18 m Engine power: 74 kW Permitted total weight: 13,450 daN Permitted front axle load: 7,200 daN Permitted rear axle load: 9,000 daN Towing capacity: 8,600 daN Ljdpfoyzfpaox Al Isab Tire pressure per data plate: front 4.5 bar / rear 4.5 bar Cabin type: CAB MRT 1640 PV Ref. 684410 Cabin No.: B: 276369 Features: Rotating upper carriage, fork carriage, radio remote control Speed rating: 20 km/h Features / Advantages - Only approx. 850 operating hours - Rotor function for maximum operational flexibility - Tall lifting height with solid load capacity - Radio remote control included - Excellent all-round visibility from the cab - Rugged off-road tires Ideally suited for construction, assembly, industrial use, and material handling Condition / Notes - Used machine - Overall neat and well-maintained visual impression - Cab and seat in presentable condition - Type plate and markings available - Sale as used, as inspected, without warranty for hidden defects Areas of Application Ideally suited for: - Structural steelwork - Warehouse/industrial building construction - Assembly jobs - Construction site logistics - Industrial applications - Material handling Inspection / Loading Inspection possible by appointment. Additional photos, videos, or detailed information available on request. Loading and transport arrangements can be supported upon request.