Tornos Multi Alpha 6X32 nakup rabljenega (5.768)

Stanje: zelo dobro (rabljeno), skupna dolžina: 10.000 mm, skupna širina: 2.400 mm, skupna višina: 975 mm, barva: modra, Operating conditions: The trailer is designed for use on level, paved surfaces in internal plant transport operations. Train operation: The trailer components (without a trailer coupling) are not designed for multiple-trailer combined operation. Payload: 32 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permissible upon notification. Loading area: Size approx. 10,000 × 2,400 mm, loading height approx. 975 mm, loading platform covered with softwood planks, circumferential edge protection. Steering: Front turntable steering, drawbar can be raised and removed, coupling height on the towing vehicle approx. 350–500 mm, towing eye according to DIN 74054, diameter 40 mm, drawbar safety lock according to accident prevention regulations (UVV). Chassis: 2 steered and 2 non-steered oscillating axles, wheels with solid elastic rubber tires approx. 450 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue. Lajdpfx Ahoxrtkwjuec Additional equipment: Each longitudinal side equipped with two horizontal lashing bars made of round steel welded into the outer beams.

Stanje: skoraj kot novo (rabljeno), skupna dolžina: 6.000 mm, skupna širina: 2.500 mm, skupna višina: 1.012 mm, barva: modra, Operating Conditions: The heavy-duty trailer is designed for use on level, paved surfaces for in-plant transportation. Train Operation: The trailer components are not (without a trailer coupling) designed for operation in combination with multiple trailers. Payload: Laedpfx Asuf Rw Tshujc 60 t at 6 km/h with evenly distributed load (surface load) on the loading platform between the axles. Point or strip loads are permitted only upon notification. Main Frame: Robust welded construction made of section steel profiles. Loading Platform: Dimensions approx. 6000 x 2500 mm, loading height approx. 1012 mm, platform covered with softwood planks, all-round recessed edge protection. Steering: All-wheel steering on 4 pendulum axles, towing bar can be raised, removed, and attached from front to rear. Hitching height on towing vehicle approx. 650 mm (other hitching heights only permitted upon notification), towing eye as per DIN 74054, diameter 40 mm. Track rods with adjustable ball joint heads, diagonal or tie rods adjustable and fitted with maintenance-free joint bearings. Drawbar drop safety as per accident prevention regulations (UVV). Chassis: 4 steered pendulum axles, 2 steered axle lines to ensure even wheel load distribution, wheels with solid rubber tyres approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Finish: Top coat in RAL 5002 Ultramarine Blue. Additional Equipment: - Optional: Two-line compressed air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded actuators, also acting on 4 wheels. - On each longitudinal side, 2 lashing or crane eyes made of round steel welded horizontally into the outer frame members; use of crane eyes only when the trailer is not loaded. - Inner turning radius approx. 2100 mm - Outer turning radius approx. 5500 mm - Towing bar length approx. 1500 mm Rental or sale EU-wide.

Stanje: zelo dobro (rabljeno), skupna dolžina: 6.000 mm, skupna širina: 2.400 mm, skupna višina: 750 mm, barva: modra, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in in-plant transport. Towing combinations: The trailer components are not (without a tow hitch) designed for combined use with multiple trailers. Payload: The industrial trailer is capable of transporting loads up to a maximum of 25 t at 6 km/h, assuming a uniform loading (surface load) of the platform between the axles. Point or linear loads are only permitted upon notification. Main frame: The main frame of the industrial trailer is a robust welded construction made of structural steel sections. Lsdpfx Ahsxrtb Nousac Loading platform: Dimensions are approx. 6000 x 2400 mm. The loading height is approx. 750 mm. The platform is covered with softwood planks and enclosed by a continuous edge protection. Steering: Four-wheel kingpin steering, drawbar can be raised, removed, and switched from front to rear; hitch height on towing vehicle approx. 285 – 775 mm (other hitch heights only permitted upon notification); towing eye according to DIN 74054, Ø 40 mm; drawbar fall protection according to accident prevention regulations (UVV) Chassis: Both axles are steered. Solid rubber tires approx. 559 x 356 mm; wheel hubs with tapered roller bearings and lifetime grease lubrication Paintwork: Finished in RAL 5002 Ultramarine Blue Additional equipment: On each longitudinal side, two lashing bars made of round steel are welded vertically into the outer beams. Available for rent or sale EU-wide.

Stanje: zelo dobro (rabljeno), skupna dolžina: 4.100 mm, skupna širina: 2.100 mm, skupna višina: 560 mm, barva: modra, ALSO AVAILABLE OPTIONALLY WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved surfaces in in-plant transport. Payload: Ljdpsxrtgfsfx Ahujac 6 t at 6 km/h with evenly distributed load (surface load) between the axles. Point or line loads are only permissible upon prior notification. Base Frame: Robust welded construction made from sectional steel profiles. Loading Platform: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, with phenolic resin-coated plywood panels Anti-collision bumpers on the front frame ends Steering: Four-wheel knuckle steering, towing drawbar can be raised, non-reversible and non-removable, Drawbar drop lock in accordance with accident prevention regulations (UVV) Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with conical roller bearings and permanent grease lubrication Paint Finish: Top coat RAL 5002 Ultramarine Blue Other Features: - Impact protection on the front frame ends made from drop-shaped half-shells. - All-round anti-slip edge approx. 25 mm high - Side underrun protection at the height of the diagonal brace - Pin coupling with captive, spring-secured bolts (diameter 30 mm) at the rear - Double-acting wheel chock with chain - Two reflectors at the rear - Prepared for roof structure

Stanje: skoraj kot novo (rabljeno), skupna dolžina: 5.000 mm, skupna širina: 2.400 mm, skupna višina: 930 mm, barva: modra, Operating Conditions: The trailer is designed for use on level and paved surfaces in internal company transport (in-plant traffic). Towing Vehicle (Type): unknown Transported Goods: unknown Multiple Trailer Operation: The trailer components (without trailer coupling) are not designed for combined operation with multiple trailers. Payload: 40 t at 6 km/h with uniform load distribution (surface load) over the platform between the axles. Point or line loads are only permissible upon notification. Lasdpexrtluofx Ahuec Main Frame: robust welded construction made from section steel Platform: approximately 5000 x 2400 mm, loading height 930 mm, platform covering with wooden planks, continuous edge protection Steering: all-wheel steering on 4 pendulum axles, drawbar can be raised, removed, and swapped from front to back; coupling height on towing vehicle approx. 670 mm (other heights only permissible upon notification); towing eye as per DIN 74054, diameter 40 mm; tie rods with adjustable ball-joint heads; diagonal or draw rods adjustable and fitted with low-maintenance joint bearings; drawbar safety lock per accident prevention regulations (UVV) Chassis: 4 steered pendulum axles (2 steered axle lines) to ensure even wheel load distribution, wheels with solid elastic rubber tyres approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultra marine blue Additional Equipment: 2 securing stakes each on the longitudinal sides Rental or sale EU-wide.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Kompleten sistem za sortiranje, polnjenje in zapiranje steklenic, predhodno uporabljen za 1L steklenice. Sistem zajema: 1 x Dvigalo za pokrovčke. Višina izmeta – 2020 mm. Skupne mere – 2150 mm D x 1120 mm Š x 2350 mm V. 1 x Otočna miza (Lazy Susan) za sortiranje steklenic na po višini nastavljivih nogicah. Premer 1 m. Skupne mere – 1700 mm D x 1250 mm Š. 1 x Alpha Pack Europe srl / Intamac sistem za polnjenje in zapiranje steklenic s posodo za sortiranje pokrovčkov, uporabljen za steklenice do 1L. Model – 9888L-2. Serijska št. – 20210115. Letnik izdelave – 2021. Sistem je polnil 1L PET steklenice v obliki vinske steklenice. Pokrovčki – aplikacija pokrovčka premera 39 mm. Lasdpfxey Upbte Ahuoc Trak – širina 190 mm. Električne zahteve – 220 V / 50 Hz / 1 faza. Moč – 3,5 kW. Zračni tlak – 6 bar. Skupne mere – 2750 mm D x 1900 mm Š x 2000 mm V.

Stanje: rabljeno, Leto izdelave: 2011, Premer palice 20 mm Prehod vretena 22 mm Dolžina struženja 170 mm Hitrost vrtenja 10.000 min⁻¹ Indeksiranje po C-osi 0,001° Prevzemna postaja 20 Indeksacija za vsak 1° Hitrost vrtenja 10.000 min⁻¹ Število orodij 7+4+8 Število rezkalnih postaj 3 Lasdpfx Aoylcm Njhuoc Krmilje Fanuc Oi-TD Dolžina struženja 170 mm Število osi 5 Delovne ure vretena 16.000 h Obratovalne ure 35.000 h Skupna potrebna moč 11 kW Teža stroja cca. 1900 kg Potreben prostor cca. 1,64 x 1,2 x 1,73 + SBF m CNC dolgovretenasti stružni stroj Tornos Delta 20/5 z avtomatskim podajalnikom palic Robobar SBF 320e Zelo dobro, vzdrževano stanje, iz fine mehanike

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, The Multi-Fill MPFSH-075-01 depositor is an ideal solution for the precise dosing of various food products. Thanks to its versatile design, it can handle a wide range of products, such as cooked pasta, rice, vegetables, cut fruits, surimi, chilled salads, and even cooked meats. This machine stands out for its ability to accurately dispense products that are difficult to handle, while ensuring uniform distribution into different types of containers. Moreover, the machine is engineered for efficient operation, featuring optimized air and water consumption, which reduces operating costs while maintaining consistent performance. Its integration into a production line enhances productivity and guarantees high-quality results. Additionally, this robust machine is suitable for demanding industrial environments, providing a durable solution for food processing needs. In summary, the Multi-Fill MPFSH-075-01 depositor is an essential asset for businesses aiming to improve the efficiency of their dosing processes while ensuring consistent product quality. Ljdpswf D Rwofx Ahueac Technical specifications: Model: MPFSH-075-01 Brand: Multi-Fill Year of manufacture: 2006 Air consumption: 60 CPM > 80 PSI / 30-35 cubic ft/min / 5.5 bar / 51-60 Nm/hour Water consumption: 0.75–1 GAL/min / 2.8–3.8 litres/min Total required frequency with air vacuum: 0.45 kW Products dosed: cooked pasta, rice, cut vegetables and fruits, surimi, chilled salads in a variety of containers, cooked meats.

Stanje: zelo dobro (rabljeno), ohranjenji držala orodja za DECO 20 - DECO 26 3 kosi - TORNOS fiksna držala orodja za X1Y1; X2Y2; X4Y4 ----- - Držalo stružnega noža za 16x16: - Cena na držalo 180,00 €/kos za DECO2000 ø20 & 25 mm DECO 20 in DECO 26 3x s čelno ploščo 1x brez čelne plošče ----- Dostava znotraj BRD 12,00 € Dostava znotraj EU 25,00 € Poleg tega imamo tudi 6 vretenastih redukcijskih vložkov: Laedpfx Ajy Apn Aohuoc bili so v DECO 26 mm notranji ø 8,0 mm; ø 12,0 mm; ø 21,0 mm; 3x ø 26 mm zunanji ø 30 mm, navoj M32x1,5, dolžina cca 360 mm Prirubnica - zunanji ø 45 mm x 9 mm, 4x izvrtina z navojem M4 2x utor 8 mm Posebna cena za vseh 6 redukcij z dostavo 380,00 € Po želji z veseljem pošljemo slike, za to potrebujemo vaš e-mail naslov.

Stanje: rabljeno, Machine not operational – Control system not functioning Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column spacing front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram return force: approx. 22 tons Adjustable approach speed: 100–800 mm/s Pressurization up to 5000 kN: approx. 0.7 sec Return speed: approx. 300 mm/s Main drive motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-way flat guide for the ram - Hydraulic ram locking at top dead center - Separate control cabinet (200 x 50 cm) - Electrical control SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") Lodpfx Ahedzqptjujac - Adjacent two-hand control console - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons. The machine was used for straightening red-hot steel flanges. From insolvency – in good condition

Stanje: rabljeno, skupna dolžina: 10.500 mm, Leto izdelave: 2016, nosilnost: 14.000 kg, Trailer Multi-Trans VAL 30 Drive: None Year of manufacture: 2016 Ljdpfx Ahexd Edmjuoac Payload (kg): 14,000

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), MULTI-PRESS MP.610 6 MATRICES Mechanical and electronic components in perfect condition 12x80 mm Lasdpfeh Rkhnsx Ahusc MAXIMUM CUTTING LENGTH 105 mm 170 strokes per minute YEAR 2002 FULLY OPERATIONAL AVAILABLE IN SPAIN ADDITIONAL PHOTOS AND VIDEOS AVAILABLE

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 8 - Number of counter spindles: 1 - Hirth serration - Number of cross slides: 8 - Max. production rate: 50 [pieces/min] SPINDLES * Max. bar diameter: 21 [mm] * Spindle speed: 620–6000 [rpm] COUNTER SPINDLE - Counter spindle of mechanical type ELECTRICAL SUPPLY Lsdpfx Ahjwdag Ejusac - Supply voltage: 380 [V] WEIGHT AND DIMENSIONS - Footprint: 4700 x 1200 [mm] - Machine height: 2250 [mm] - Machine weight: 5850 [kg] ACCESSORIES - Control system: Fanuc Power Mate - Oscillating stop - Coolant tank - Coolant reservoir - Bar magazine: PRA 40/33F - Bar support and its base

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, Magazin za palice Robobar SBF-320 Zagon: 22.06.2012 Ure pod elektriko: ca. 40.000h Čas rezanja: 22.000h (stanje 02/2025) Število osi: 4 Število prečnih AGW: 3 kos (2 x ER11, 1 x ER16) Vrtljiva orodja: 5 kos, steblo 12x12 (od tega 3 obrnjena navzgor) Nosilec za čelno vrtanje: 4-kratni Lajdexph Hhjpfx Ahuoc Vpenjalne klešče: 2 x tip E136 Vodilni tulec: F605 Stroj je pri nas deloval izključno v olju.

Stanje: rabljeno, TEHNIČNI PODATKI - Število vreten: 6 - Največja obdelovalna dolžina: 60 [mm] Laodpfx Ahouharleuoc - Število prečnih sani: 6 - Največja proizvodnja: 75 [kos/min] - Število razpoložljivih neodvisnih pomikov: 4 - Običajni hod neodvisnih pomikov: 45 [mm] - Hirth utorjenje VRETENA - Največji premer palice: 16 [mm] - Hitrost vrtenja vretena: 800 - 8000 [obr/min] - Moč pogona vretena: 7,5 [kW] - Število hitrosti vretena: 16 ELEKTRIČNA OSKRBA - Napajalna napetost: 400 [V] - Skupna moč: 15 [kVA] TEŽA IN DIMENZIJE - Potrebni prostor: 5049 x 1100 [mm] - Višina stroja: 1615 [mm] - Teža stroja: 2700 [kg] OPREMA - Krmilje: Fanuc - Odbiranje delov - Rezervoar za hladilno tekočino - Električni transformator - Zaustavitev vretena

Stanje: dober (rabljeno), Leto izdelave: 2009, Professional horizontal packaging machine from a renowned manufacturer. Suitable, for example, for packaging food products, confectionery, medical devices, technical items, print and paper products, household goods, toys, and textiles. Package width: 35 – 100 mm Package length: 65 – 160 mm Package height: 5 – 35 mm Output: 35 – 200 packs per minute Film width: 80 – 220 mm Machine weight: 450 kg Machine dimensions: Length 4.0 x Width 0.9 x Height 1.6 m Lodpfx Aspm Hcbehuoac 220V / 50-60 Hz / 2.7 kW

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 75.336 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: T62204, Oprema: dokumentacija / priročnik, TECHNISCHE DATEN - Achszahl: 10 - Spindelanzahl: 2 HAUPTSPINDEL - Maximale Stangendurchmesser: 25,4 mm - Maximale Bearbeitungslänge: 200 mm - Spindeldrehzahlen: 10.000 U/min - C-Achse Positioniergenauigkeit: 0,1° GEGENSPINDEL - Maximale Stangendurchmesser: 20 mm - Spindeldrehzahlen: 10.000 U/min Ljdpfx Asw Stndjhueac - Spindelleistung: 3,7 kW - C-Achse Positioniergenauigkeit: 0,1° - Anzahl Führungsbuchsenhalter: 2 FÜHRUNGSBUCHSENHALTER 1 - Anzahl Stationen: 5 FÜHRUNGSBUCHSENHALTER 2 - Anzahl Stationen: 5 - Anzahl angetriebene Stationen: 4 - Drehzahl angetriebene Werkzeuge: 8.000 U/min FRONTAUFNAHME - Anzahl Stationen: 4 - Anzahl angetriebene Stationen: 4 - Drehzahl angetriebene Werkzeuge: 6.000 U/min ZWEITBETRIEB - Anzahl Stationen: 7 - Anzahl angetriebene Stationen: 3 - Drehzahl angetriebene Werkzeuge: 8.000 U/min STROMVERSORGUNG - Versorgungsspannung: 400 V - Gesamtanschlussleistung: 14 kW GEWICHT & ABMESSUNGEN - Grundfläche der Maschine: 2.270 x 1.650 mm - Maschinenhöhe: 2.200 mm - Maschinengewicht: 3.500 kg AUSSTATTUNG - CNC-Steuerung: Fanuc - Antrieb für rotierende Werkzeuge an: S2, S3, S5 vertikal/horizontal - Rotierende Führungsbuchse - Werkstückfänger - Werkstückauswurf - Kühlmitteltank - Stangenlader: ROBOBAR SSF

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood Code: RU0000722 - Manufacturer Code: SP 100S-MF1-7 - Condition: Used - Functionality: Not tested. If interested, we offer an overhaul service—please contact us. Lsdpfxsv Azige Ahueac

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood Code: RU0001205 - Manufacturer Code: SP 100S - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Lasdpfx Ahev Du Apsuec

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ferwood Code: RU0011542 - Manufacturer Code: SP100V-MF1-7-2H0-2S - Condition: Used - Functionality: Fully operational - If interested, we offer a reconditioning service; please contact us. Ledpfx Ajv I Dh Ashusac

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood Code: RU0005404 - Manufacturer Code: SP 100-MF1-10 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Lodpfxev Eflwo Ahujac

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7213, Manufacturing Origin: Switzerland Net Weight: approx. 2550 kg Customs Tariff: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-Axis Machine – Standard Version 10 axes, 6 spindles: Axes and Spindle Designation - 1 sliding headstock: Z1, S1 - 2 independent vertical gang tools: X1Y1, S6 – X2Y2, S2 - 1 combined unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent counter-operation rotating axis: X4, S5 Bar feed position: right side of operator Machine axis height: 1100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: - Guide bush machining: 180 mm - Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (No. 76-201) Ljdpfx Ajw T Tcwshuoac Guide bush: fixed / rotating Guide bush collet, type: Meister 605 Number of lateral tool stations, combined: - Fixed: 2 x 5 - Rotating: 3 + 3 Number of frontal tool stations, combined: - Fixed: 4 - Rotating: 3 Number of rear tool stations, combined: - Fixed: 3 + 3 - Rotating: 3 + 3 Tool section: 12x12 mm Standard rotating tool holder: ESX 20 Bar feeder: yes Part catcher: yes All technical data is provided without guarantee and subject to change and/or errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.650 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS bar loader Fanuc 31iB - 5646 hours Country of manufacture: CH Voltage: 400V Dimensions: 2135 x 1250 x 2114 mm Net weight: 2700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Max bar diameter: 16 mm Max machining length: 180 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub spindle Max bar diameter: 16 mm Spindle speed: 12,000 rpm Lasdpjkhnqgofx Ahujc Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool set 1 Number of stations: 5 Number of driven stations: 3 Driven tool speed: 8,000 rpm Tool set 2 Number of stations: 5 Number of powered stations: 3 Driven tool speed: 8,000 rpm End unit Number of stations: 4 Number of powered stations: 3 Driven tool speed: 8,000 rpm Counter operations Number of stations: 6 Number of driven stations: 6 Driven tool speed: 8,000 rpm Electrical supply Mains voltage: 400V All technical data is provided without obligation and is subject to errors or prior sale.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Fanuc 31i, rotary guide bushing, parts catcher, parts conveyor, parts ejector, coolant tank, Robobar SBF-532 bar feeder, max. bar length 3600 mm Country of Manufacture: Japan Voltage: 400V Net weight: 3000 kg External dimensions: 240 x 138 x 205 cm Customs tariff number: 8458.11 20 TECHNICAL DATA Number of axes: 8 Number of spindles: 2 Control: Fanuc 31i Main spindle Max. bar diameter: 25.4 mm Travel: 230 mm Speed: 10,000 rpm Power: 5.5 kW C-axis indexing accuracy: 0.1° Sub spindle Max. bar diameter: 25.4 mm Speed: 10,000 rpm Power: 5.5 kW C-axis indexing accuracy: 0.1° Number of guide bushings: 2 Guide Bushing 1 Number of stations: 10 Number of driven stations: 4 Speed of driven tools: 10,000 rpm Guide Bushing 2 Number of stations: 2 Number of driven stations: 2 Speed of driven tools: 10,000 rpm Back-working unit Number of stations: 4 Secondary operation Number of stations: 2 Electrical connection: 400V Total power: 14 kW All technical details are provided without obligation and subject to error or omission. Inventory No. 2180201, Machine consisting of: Fanuc 31i CNC control Rotary guide bushing Parts catcher Parts conveyor Parts ejector Coolant tank Bar feeder Robobar SBF-532, max. bar length 3600 mm Ledpfxed Hihys Ahujac

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2410, Year 2001 with Fanuc Deco and 10 axes Fully checked and partially overhauled as per report. Country of manufacture: Switzerland Net weight: 1,500 kg Customs tariff number: 8458.11 20 Dimensions: 1650 x 1050 x 1850 mm TECHNICAL SPECIFICATIONS (standard version) Headstock (Z1 axis) (+C axis optional) Maximum bar capacity: ø 10 mm Maximum part length, depending on collet type: 60/90 mm Programmable spindle speed: 0–16,000 rpm Positioned and indexed stop, increment: 0.1° Maximum spindle power: 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of turret tools (2 slides; 2 x 2 axes): 2 x 4 Tool section: 8 x 8 mm Number of cross drilling/milling tools: 4 Programmable rotation speed: 0–12,000 rpm Front working device (X3/Y3) Maximum number of front tools: 3 Programmable rotation speed: 0–12,000 rpm Sub-spindle and secondary operations (X4/Z4) (+C optional) Maximum clamping capacity: 7 mm Programmable rotation speed: 0–16,000 rpm Positioned and indexed stop; increment: 0.1° Maximum number of secondary operations: 4 Number of fixed or live spindles: 4 Maximum spindle rotation speed: 9,000 rpm Tornos-Bechler/Fanuc dedicated CNC Type of processor: 486 DX2 Number of simultaneous axes: 10 Ledpfxjw T Tfro Ahujac Machine versions: 9 axes + C axis on main spindle and/or C axis on sub-spindle All technical data provided without guarantee of accuracy or completeness.