Testiranje Materialov nakup rabljenega (1.507)

Stanje: rabljeno, brez vtiča Lsdpfsxzi Hyex Ahusrn

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115kW) Charge Air and Water Cooler Electronic Direct Injection / Common Rail Advanced Idle Automation with Engine Shutoff Function ECO and Power Mode Temperature-Controlled Fan Drive with Reversing Fan Spatially Separated High-Performance Cooling System Cooling System with Temperature-Controlled Fan Drive Reversing Fan for Hydraulic Oil Cooler External Jump-Start Terminals on Uppercarriage Maintenance Flaps, Gas Spring Supported with Soft-Close Assist Automatic Central Lubrication System, Grease Reservoir Fillable from Ground Level Rear View Camera Side Camera LED Lighting Package Equipment LED Lighting Package for Cab Support Blade on Oscillating Axle Side, 3m Width, with Integrated Cylinder Protection Travel Direction Detection and Steering Direction Reversal Electronic Steering Lock for Rigid Axle All-Wheel Drive and All-Wheel Steering Dual-Circuit Brake System Powershift Transmission Twin Pneumatic Tyres, without Intermediate Rings 10.00-20 16PR (Trelleborg T900) Wireless Tyre Pressure Monitoring Automatic Oscillating Axle Lock Front and Roof Protective Grille for Timber Loading Machines Rigid Cab System (Viewing Height 4.00 m) Cab Privacy Glazing (Side and Rear Windows) Single-Pane Safety Glass Sliding Window in Cab Door Clear Glass Roof Window Windscreen Washer System Low-Frequency Suspended Comfort Driver Seat incl. Seat Heating and Seat Ventilation with Synchronous Armrests / Joysticks Joystick Steering Automatic Climate Control Multifunction Display Document Clip Outreach at Stick Pin 13m at Grab Tip 10.7m Short-Range Extension for Loading Stick Level Monitoring for Coolant and Hydraulic Oil Attachment Tool Filter System Pipe Burst Valves for Hoist Cylinder Pipe Burst Valves for Stick Cylinder Basic Overload Warning Device Quick Coupler on Loading Stick Ledpeyh A Iiefx Ahusrn Timber Grab on Request 1 or 1.25m³

Stanje: rabljeno, SincoTec Model: POWER SWING 100 MOT Big Table The POWER SWING 100 MOT from SincoTec is a high-performance resonance test bench designed for fatigue testing of materials and components. The system enables dynamic load tests with high forces (up to ±100 kN) and precise control. Typical applications include lifetime testing, fatigue strength assessments, and component validation under realistic conditions. Thanks to its robust construction, precise sensors, and stable granite table, this test bench is ideally suited for research, development, and quality control in industry and academia. Notes: The resonance test bench is ideally suited for material and component testing under dynamic loading conditions. Technical Data: General Data – Test Bench: Overall height: 1215 mm (without clamping device) Width: 2005 mm Depth: 1205 mm Maximum force amplitude: 50 kN Maximum total force: ±100 kN Sensor accuracy: min. Class 1 (according to DIN EN 10002-3) Control Cabinet: Total height: approx. 1800 mm Tabletop height: 1080 mm Width: 650 mm (narrow table) / 1420 mm (wide table) Depth: 700 mm Weight: 180 kg (with granite tabletop approx. 240 kg) Color: RAL 9006 (white aluminum), tabletop Midnight Installation Requirements: Required floor space: 4.3 × 3.0 m Required ceiling height: min. 2.5 m Floor load-bearing capacity: 2.0 t/m² Power supply: 400 V / 50 Hz (three-phase, right-hand rotating field) Connection: CEE plug 5-pin, 16 A Fuse protection: 16 A Weight: approx. 3.6 t Condition: used Scope of delivery: (see picture) Lrodpfx Aoxrlkvohuon (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Stanje: dober (rabljeno), Zwick Typ: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Stroj na zkoušení materiálů Zkušební síla v tahu / tlaku: 500 N Celková výška bez horní příčníky: 789 mm Ljdpfx Ajw Ib Uwehusrn Celková šířka: 411 mm Celková hloubka: 622 mm Zastavěná plocha: Čistá plocha pro ustavení: 0,008 m² Základní plocha rámu: 0,196 m² Specifické zatížení podlahy: Podle typických vestaveb: 0,85 kg/cm² S 50% bezpečnostní rezervou: 1,28 kg/cm² Zatížení stropu: Podle typických vestaveb: 97 kN/cm² S 50% bezpečnostní rezervou: 146 kN/cm² Hloubka pracovního prostoru: 105 mm Výška pracovního prostoru s konzolou namontovanou nahoru: Minimální výška: 235 mm Maximální výška: 565 mm Výška pracovního prostoru s konzolou namontovanou dolů: Minimální výška: 90 mm Maximální výška: 420 mm Hmotnost: cca 78 kg s příslušenstvím Stav: použité Rozsah dodávky: (viz foto) (Údaje a technické specifikace se mohou změnit a mohou obsahovat chyby!) V případě dalších dotazů nás neváhejte kontaktovat telefonicky.

Stanje: rabljeno, Zwick Tip: HA 50 Dimenzije: V 2685 mm x Š 1040 mm x G 750 mm Postavitvena površina: 1600 cm² Tehnični podatki: Lrjdpfex A Aaijx Ahuon Fmax: 50 kN Vmax: 1500 mm/s Delovni prostor - maksimalna višina: 1370 mm Delovni prostor - širina: 565 mm Oprema: Kistler merilnik sile 50 kN preko NI-Labview Hidravlična agregat 280 bar Postavitvena površina: 415 cm² Vpenjalno orodje / nosilec vzorcev prisoten (Univerzalna prirobnica, visokotrdne čeljusti za nosilec vzorcev) Računalnik + programska oprema testXpert R V6.0.0 Stanje: rabljeno Obseg dobave: (glejte sliko) Teža cca 1200 kg brez okvirja ipd. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih!) Za dodatna vprašanja smo vam na voljo po telefonu.

Stanje: zelo dobro (rabljeno), EDAG EDAG Huf Endurance Test Stand Intended use: This test stand is exclusively designed for testing parts that are capable of rotational and/or translational motion within the scope of an endurance test and within the limits of the following technical specifications. Technical specifications: Dimensions: Width 1565 mm x Depth 615 mm x Height 1655 mm Weight approx. 450 kg Operating voltage 400V / 50Hz Control voltage 5, 24 Preliminary fuse 16 A Test device: Maximum stroke 194 mm Maximum axial force 500 N Maximum torque 5 Nm Breakaway force (manual slide) 15 N Sliding force (manual slide) 10 N Other equipment: Ρ4, 24" TFT monitor (1900 X 1080) Operating System: Windows XP Measurement and control software: LabVIEW 2011 PC interface cards: 1 card, NI PCI-6251, 1 card, NI PCI-7044 Drawer: 500 mm (full extension with automatic closing), additional load 500 N Lockable drawer cabinet, 3 drawers The teach-in endurance test stand is a device for performing endurance tests on test objects that are capable of rotation and/or translational movement, e.g. cylinder locks, door handles, key functions. Condition: used Scope of delivery: (See picture) Ledpfevx S Apex Ahusrn (Changes and errors in the technical data are reserved!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Liebisch Type: S 1000 A-TR / 42016211 Chest-type apparatus with 1000 liters test chamber volume for salt spray tests. Constamatic® TR This series includes fully automatic chest-type devices of the A-TR type. Device operation is controlled via a touchscreen. All functions are displayed on a touchscreen with an intuitive user interface. Technical Data: Device type: S 1000 A-TR External dimensions (W x D x H in mm): 2600 x 1120 x 1210 Test chamber internal dimensions (W x D x H in mm): 1535/1425 x 800/780 x 660/650 Max. load capacity per sample rack: 10 kg per level Operating voltage: 230 V +6/-10% Connected load S: 2700 W Humidity control range S: up to / 70°C Lrsdpswf Dh Nofx Ahuen Test chamber temperature range K: up to / 50°C Test chamber temperature range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution reservoir: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 – 1.0 liters Water basin capacity, bottom tray KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Materials Testing Machine – Precise Strain Gauge Measurements Note: No PC included!! Highlights: - Test force: 50 kN (tension / compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A), ambient temperature +10 to +35 °C, humidity 20–90% Special features: Ledpfxsw S Hvzs Ahujrn Ideal for research, development, or industrial material testing Dimensions & Weight: Load frame: Test force (tension/compression): 50 kN Load frame height: 1,714 mm Overall height: 1,814 – 2,688 mm Load frame width: 760 mm Total width: 936 mm Load frame depth: 477 mm Total depth: 722 mm Weight: With electronics unit: 230 kg With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see pictures) ZwickRoell BT1-FR050TH.A1K testing machine Operating manual (Specifications subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Stanje: rabljeno, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer maintenance carried out General Information For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test stand operated in single-shift use, and all maintenance was regularly performed by the manufacturer. Special features: - Robust construction for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance record available - Ideal for research, testing, and development applications Technical Data – Test Stand Feature / Value Total height of test stand: 1215 mm (without clamping device) Width of test stand: 2005 mm Depth of test stand: 1205 mm Maximum force amplitude: 10 kN Maximum total force: ±20 kN Transducer accuracy, min.: Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value Total height of control cabinet: approx. 1800 mm Tabletop height: 1080 mm Control cabinet width: 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Control cabinet depth: 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight: 152 kg (small tabletop), 187 kg (large tabletop), with granite tabletop 247 kg Location Requirements Feature / Value Required space: 4.3 × 3.0 m Required ceiling height: 2.5 m Floor load capacity: 234 N/cm² Electrical Requirements Feature / Value Voltage: 400 V three-phase with neutral conductor and protective earth Phase rotation: clockwise Voltage fluctuations: ≤ ±10 % Short interruptions: < 20 ms Limits for continuous disturbances: Radio interference level A in accordance with VDE 0871 Frequency: 50 Hz ± 1 % Protective earth / ground resistance: < 0.3 Ω Connection and Protection Feature / Value Power supply: 400 V / 50 Hz (clockwise rotation) Connection plug: CEE socket, 5-pin, 16 A Protection: 16 A Lodpoxrffajfx Ahusrn Test stand weight: approx. 3.6 t Maximum clamping device weight: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data; all information provided without liability!) If you have any further questions, we are happy to assist you by phone.

Stanje: rabljeno, Tehnični podatki (tip/proizvajalec – brez garancije): Vrhunska moč: »po podatkih proizvajalca« v območju ≈ 10 kN Največje pospeševanje: »do pribl. 1.000 m/s²« Največja hitrost: »tipično v območju pribl. 1 m/s do nekaj m/s« Lsdpfx Ahsxtdl Ijusrn Komponente: Krmilna omara TGA 022/3 Vzbujevalnik nihanja SW 6507 Ojačevalnik moči TG D 9000-000.00 Ventilator Stanje: rabljeno Obseg dobave: vibracijski preizkusni sistem, kot je prikazano (Spremembe in napake v tehničnih podatkih in navedbah so pridržane!) Za dodatna vprašanja smo vam na voljo po telefonu.

Stanje: rabljeno, Weiss Type: TS 130 Temperature Shock Test Chamber, Water-Cooled Specification: - Temperature range hot chamber: +60°C to +220°C - Temperature range cold chamber: -10°C to -80°C - Transfer between hot/cold chamber: 10 sec. - Temperature stability: ±1 K Lredpjvwckhefx Ahuon Dimensions and further data: - External dimensions: Height 1990 mm - Width (without and with door hinge): without approx. 1820 mm / with approx. 1850 mm - Depth (without and with test chamber door): without approx. 900 mm / with approx. 1155 mm - Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm - Volume: 130 liters - Maximum test chamber load: 20 kg - Maximum floor load in test chamber: 20 kg - Cooling water pressure: min. 2 ... max. 6 bar - Max. circuit protection: 35 A (plug 32 A CEE) - Sound pressure level, 1 m in front of unit: approx. 65 dB(A) - Refrigeration cascade, water-cooled - Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW - Rated current: 26.0 A - Refrigerants: R404A / R23 - Weight: approx. 950 kg Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) For further questions, feel free to contact us by phone.

Stanje: rabljeno, RMS Regulacijska in merilna tehnika – Vibracijski testni sistem z dodatki Na prodaj je visokokakovosten komplet RMS regulacijske in merilne tehnike ter ventilatorja Rietschle, idealen za vibracijske teste, preizkuse resonance in analize materiala. Priložene naprave: - RMS REGELUNGS-UND MESSTECHNIK – Vibracijski vzbujevalnik tip SW 6011 št. 2230 Lrjdjxudw Tspfx Ahusn 30 V – 200 A 13 mm / 1,2 m/sec / 100 g - Nosilni okvir tip SWT 6211/1 št. 6074 – stabilno pritrdilo za preizkusne vzorce - Ojačevalnik moči tip TGE 10‑1/7 – za optimalno vodenje vibracijskega vzbujevalnika - Rietschle SKG 410‑2.01 ventilator – zmogljiv vakuumski/tlačni puhalnik Stanje: rabljeno Obseg dobave: (glejte sliko) (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih!) Za dodatna vprašanja nas lahko pokličete po telefonu.

Stanje: rabljeno, SincoTec Type: Exciting Mot Resonance Test Stand POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test stand is designed as a dual-mass oscillator. It consists of a vibration head, excited by an unbalanced motor via a frequency-controlled asynchronous motor, which is installed in the upper part of the machine to generate the dynamic amplitude. The vibration head is supported on the upper traverse by preloaded coil compression springs and centrally guided. The central load drive is located in the lower part of the machine and provides the static preload using a geared motor and spindle drive. The specimen chamber is located above the clamping table and is limited upwards by the adjustable traverse. Ljdpfx Ahovx Su Souern Control of the test stand is handled by the EXCITING MOT control system. All control electronics for the system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and complies with protection class IP 50 according to EN 60529. Technical Data: General Test Stand Data: - Total height: 1840 to 2240 mm - Machine table height: 1030 mm - Test stand width: 800 mm - Test stand depth: 1500 mm - Maximum specimen chamber height: 600 mm (without force transducer) - Free column passage: 550 mm - Maximum force amplitude: 10,000 N - Maximum total force: ±20,000 N - Maximum oscillation stroke: ±5 mm - Test frequency: 30 to 110 Hz - Sensor accuracy: min. class 1 (according to DIN EN 10002-3) - Weight: approx. 1880 kg - Max. clamping device weight: 150 kg Control Cabinet Data: - Total height: 1900 mm - Table top height: 1080 mm - Width: 650 mm - Depth: 700 mm - Weight: 152 kg - Color: RAI 9006 (White Aluminium), table top Midnight Installation Requirements: - Required space: 2.5 x 2.5 m - Required ceiling height: 2.8 m - Floor load capacity: 170 N/cm² - Power supply: 400 V / 50 Hz (right-hand phase sequence) - Connection plug: CEE socket, 5-pin, 16 A - Fuse protection: 16 A Connection and Environmental Conditions: Network requirements: - Voltage: 400 V three-phase with neutral conductor and protective earth, right-hand phase sequence - Voltage fluctuations: < ± 10% - Short interruptions: < 20 ms - Limits for continuous interference: radio interference level A (according to VDE0871) - Frequency: 50 Hz ± 1% - Protective earth resistance: < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data. All information is non-binding!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Product description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. This chamber is ideal for rapid temperature change testing (e.g. according to IEC, MIL‑STD, JEDEC standards) and has been well maintained. Volume & Internal Dimensions: Test volume: 60 litres Internal dimensions (basket/test chamber, W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Cycling: Hot chamber: +50 °C to +220 °C Cold chamber: −72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate: up to 17 °C/min Cooling rate: up to 3.7 °C/min In single mode (cold zone only) heating rate: approx. 3.2 °C/min Temperature Deviation & Homogeneity Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Payload & Lift System Basket/lift system load: 20 kg maximum load capacity Transfer basket secured by protective grid on all sides Additional Features & Equipment Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A External fuse: 32 A Refrigerants R-404A / R-23 Weight: 800 kg For your security as the buyer, the following procedures are performed on every chamber we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) Lrodpjxr A R Tofx Ahuon (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Stanje: novo, lastna masa: 303 kg, skupna masa: 750 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 750 kg, dovoljena osna obremenitev (os 2): 750 kg, dolžina tovornega prostora: 6.060 mm, širina tovornega prostora: 1.220 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 7.300 mm, skupna širina: 1.670 mm, vzmetenje: drugo, velikost pnevmatike: 155/70 R13, največja hitrost: 100 km/h, zavoro prikolice: priklopnik brez zavor, Leto izdelave: 2026, TEMARED Trailer Type PROFILE 6012 For transporting long pipes and profiles Loading area 6060 x 1220 mm Permissible gross weight: 750 kg (legal), payload up to 447 kg Technical gross weight: 1500 kg, payload up to 1197 kg Brand-new trailer 2 years TÜV (roadworthiness) with initial registration, 2-year manufacturer’s warranty Standard Equipment: - Hot-dip galvanized welded steel frame - Open construction - Front and rear dropsides foldable - Hot-dip galvanized V-drawbar - Winterhoff coupling - Support wheel - Maintenance-free, rubber-suspended KNOTT axles - Tyres 155/70 R13 on steel rims - Plastic mudguards - 12V lighting system, 13-pin connector - Multifunction rear lights - Front position lights - Side marker lights - 2 wheel chocks with holders - Registration documents (Vehicle Title, COC) Above-mentioned equipment included in the price. Dimensions: Loading area: 6060 x 1220 x 400 mm (LxWxH) Floor height: 370 mm Overall length: 7300 mm Overall width: 1670 mm Overall height: 890 mm Gross weight (legal): 750 kg Gross weight (technical): 1500 kg Unladen weight: from 303 kg Payload: up to 447 kg (legal, depending on configuration) Axle load: 2 x 750 kg Nose weight: 75 kg Optional equipment at extra cost: Aluminium toolbox: + EUR 150.00 Closed floor option: + EUR 200.00 Ljdpfx Ahex Uqy Djusrn Trailer available to order. Delivery available at extra charge! Financing upon request. Visit us or contact us by email. Offer price incl. 19% VAT. Viewing: Mon-Fri 09:00 – 17:00 Saturday 09:00 – 12:00 Offer and further information upon request: Office Tel. +49 (0) 2254/83718-20 Subject to technical modifications, misprints, errors, and prior sale. Images partly show optional equipment. *Please observe the statutory weight and speed limits.

Stanje: rabljeno, Leto izdelave: 1989, Input – primary 400 V three-phase Output – secondary switchable - 230 V three-phase - 400 V three-phase - 525 V three-phase - 660 V three-phase Ledpfx Ascw Twpehujrn Power rating: 50 kVA Dimensions (W x D x H): 800 x 400 x 2,000 mm Weight: approx. 430 kg

Stanje: rabljeno, Testing device, personal grounding tester, Safety Pips Lredpfxjtuyc De Ahujn - Manufacturer: Wolfgang Warmbier, personal grounding tester Ovp - Model: Safety Pips Ref.: 7100.181 - Operation: Battery powered, 9V - Box dimensions: 115 x 110 x H70 mm - Weight: 0.2 kg

Stanje: rabljeno, Contour measuring instrument, contour measuring device, contour graph, profilograph, roughness tester, roughness measurement, roundness measurement, surface roughness probe - Manufacturer: Hommel, stylus holder for roughness measuring instrument - Model: KVA Type P2/115 - Stylus travel: s = 12 mm Lredpfsk H R Hujx Ahusn - Box dimensions: 345/130/H85 mm - Weight: 1.7 kg

Stanje: dober (rabljeno), Material test stand / final inspection station consisting of the following main components Keyence XG-H500M Digital 5-Megapixel B/W Camera Keyence XG-7701P Multi-camera Image Processing System/Controller Keyence CA-DC21E Illumination Controller Opto Engineering TC23096 Bi-Telecentric Lens --- Keyence XG-H500M Digital 5-Megapixel B/W Camera CCD: 2/3-inch monochrome CCD, square sensor; all pixels, 11x readout speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlaced (40.3 ms); interlacing is a binning process that sums the odd and even lines. Model CA-DC21E Illumination Controller Type: Illumination controller, for model series XG/CV-5000/CV-X200/CV-X100 only Input: Forced shutdown of illumination: input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage regulation (DC lighting) (2) Pulse-width modulation (emission frequency: 100 kHz) [change via controller settings] Brightness levels: 255 digital steps [controller setting] Number of connections: 2 channels (for LED and terminal block connection available) Voltage: 12 VDC / 24 VDC [adjustable via dip switch] Power: Max. 40 W (30 W per channel) Synchronization: Synchronization via FLASH output / continuous lighting [controller setting] Response time: (1) Constant voltage regulation: Max. 10 ms at 12 V output, Max. 20 ms at 24 V output (2) Pulse-width modulation: Max. 1 ms at 12/24 V output Display: LED indicator Power supply: 24 VDC ±10% Current consumption: 3.0 A (12 V output at max load), 6.5 A (24 V output at max load)*1 --- Keyence XG-7701P Multi-camera Image Processing System/Controller TC23096 Bi-telecentric Lens for 2/3" sensors, Magnification 0.093x, C-Mount Magnification (×): 0.093 Image circle Ø (mm): 11.0 Max detector size: 2/3" Working distance (1) (mm): 278.6 wF/# (2): 8 Typical telecentricity (max) (3) (deg): < 0.06 (0.08) Typical distortion (max) (4) (%): < 0.04 (0.08) Depth of field (5) (mm): 77 CTF 70 lp/mm (%): > 40 Object imaging area (6) with 1/3″ sensor (4.8 x 3.6 mm): 51.61 x 38.71 mm Lrodpog Sxmfofx Ahusn with 1/2.5" sensor (5.70 x 4.28 mm): 61.29 x 46.02 mm with 1/2" sensor (6.4 x 4.8 mm): 68.82 x 51.61 mm with 1/1.8" sensor (7.13 x 5.33 mm): 76.67 x 57.31 mm with 2/3" - 5 MP sensor (8.50 x 7.09 mm): 91.40 x 76.24 mm Dimensions Mount: C Phase adjustment (7): Length (8) (mm): 336.6 Diameter (mm): 143 Weight (g): 2500 --- Complete factory closure, Wide range of mezzanines, pallet racking, shelving, vertical carousels. High-quality industrial machinery, lathes, grinding machines, hand tools. Financing also possible via our bank. komplett-konzept.leasingo.de Visit our shop for more items - both new and used! International shipping costs on request!

Stanje: dober (rabljeno), Leto izdelave: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 environmental test chamber is designed for laboratory applications that require testing of materials and components under controlled conditions. With its versatile capabilities and user-friendly controls, this programmable unit can simulate a wide range of environmental conditions for scientific research, product testing, and process control. Single-Chamber Operation Data for Temperature Testing Hot Chamber: Temperature Shock Test Chamber, volume: 300 l Temperature range: +50 °C to +220 °C Temporal temperature deviation at the center of the workspace: ±1 K Spatial temperature deviation: ±2 K Temperature gradient (according to IEC 60068-3-5): 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air): Heating: 11 K/min Cold Chamber: Temperature Shock Test Chamber, volume: 300 l Temperature range: -80 °C to +70 °C Temporal temperature deviation at the center of the workspace: ±1 K Spatial temperature deviation: 2 K Temperature gradient (according to IEC 60068-3-5): 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air): Heating: 1.5 K/min Cooling: 4 K/min Technical Specifications: Temperature Shock Test Chamber Test chamber volume: approx. 300 l Voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a / R-23 Cooling system: water-cooled Lrjdpfxowbdv Sj Ahujn Weight: approx. 940 kg Year of manufacture: 1998 Test chamber internal dimensions: width 770 mm x depth 650 mm x height 610 mm Overall dimensions: width 1200 mm x depth 1800 mm x height 2050 mm TS 05 Financing through our partner bank is also available. komplett-konzept.leasingo.de You can find more articles – new and used – in our shop! International shipping costs available on request!

Stanje: dober (rabljeno), Resato HBU-B160 High-Pressure Gas Workshop Test System In the oil and gas industry, everything revolves around the extraction of crude oil and natural gas. One of the challenges is to optimize the use of facilities in order to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure testing ensures the quality and safety of components used in oil and gas production. By injecting a chemical fluid, the well is stimulated. With its controls, the high-pressure system manages and regulates backpressure and liquids. This enables safer extraction of oil and gas. Manufacturer: Resato Lrodpfx Ahor Hmiheusn Test system: HBU Model: HBU-B160 Max. pressure: 200 bar Max. capacity: 1570 cc/ Max. pressure: 7 bar 2 x gas cylinder holders 3 x gas cylinder trolleys Digital control panel missing Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more new and used items in our shop! International shipping costs on request!

Stanje: rabljeno, Leto izdelave: 2000, Prodano za dijelove, nedostaje ADU kartica. Automatski sustav za testiranje tableta - Laboratorijska mjerna oprema - Alat za tablete Omogućuje testiranje: - Tvrdoće - Promjera - Debljine - Težine Precizna vaga Sartorius WZ64S Raspon vaganja: 10 do 50 g Jedinica: mg / 0,5 mg / 0,1 mg (podesivo) Debljina: Pogon: koračni motor Mjerna metoda: linearni potenciometar Jedinica: mm ili inč Tolerancija: +/- 0,1 mm Tvrdoća: Pogon: koračni motor Mjerenje: mjerni most (mjerna ćelija, lmz) Princip mjerenja: dinamometrijska vaga Jedinica: N, Kp ili Sc Promjer: Pogon: koračni motor Mjerna metoda: koračni motor Jedinica: mm ili inč Raspon: 3 – 18 mm / 3 – 30 mm (ručno) Tolerancija: +/- 0,1 mm Napon: 100 / 240 V, 50 Hz / 60 Hz UTS je univerzalni, potpuno automatizirani sustav za testiranje razvijen za industrijsku upotrebu. Ovaj uređaj je odobreni model iz serije sustava testiranja uspješno korištenih dugi niz godina. Razvijen je u bliskoj suradnji s farmaceutskom industrijom. UTS 4.1 može testirati okrugle, ovalne, četvrtaste i duguljaste tablete, kao i brojne specijalne oblike. Za nježne duguljaste tablete moguće je integrirati dokazani sustav centriranja (OZB). Lrjdpex Rz I Defx Ahuon Svi dijelovi koji zahtijevaju čišćenje mogu se brzo i jednostavno ukloniti bez upotrebe alata. Sustav za testiranje moguće je proširiti raznim opcijama poput distributera i/ili sakupljača uzoraka s različitim brojem stajališta. UTS možete koristiti kao laboratorijski tester ili uređaj za online kontrolu spojen na prešu za tablete. Uzimanje uzoraka može se aktivirati izravno na proizvodnom stroju ili putem TTS11 softvera.

Stanje: rabljeno, To je oglas za sistem za testiranje hemoglobina Bio-Rad VARIANT II. Ledpfx Ahjyt Idveuorn Naprava je v popolnem delujočem stanju in je pripravljena za takojšnjo uporabo. Bio-Rad VARIANT II je visoko zmogljiv, popolnoma avtomatiziran sistem za testiranje hemoglobina. Primarno se uporablja v kliničnih laboratorijih za merjenje HbA1c pri spremljanju diabetesa ter za zaznavanje beta-talasemije in drugih motenj hemoglobina. Avtomatizirano vzorčenje: Sprejema primarne vzorčne epruvete z barkodo, kar odpravlja potrebo po ročnem pripravljanju vzorcev. Večparametrsko testiranje: Lahko preklaplja med različnimi metodami testiranja, kot sta 3,5-minutni program za HbA1c in 6,5-minutni program za talasemijo. Detekcija variant: Omogoča natančne rezultate tudi v prisotnosti pogostih variant hemoglobina, kot so HbS, HbC, HbD in HbE. Upravljanje podatkov: Rezultati in kromatogrami se upravljajo prek programske opreme Bio-Rad Clinical Data Management (CDM), ki se lahko poveže z laboratorijskim informacijskim sistemom (LIS) za sprotno poročanje.

Stanje: rabljeno, Ta ponudba je za komplet za preverjanje kakovosti pare KSA SQ1E Steam Quality Test Kit. Sistem je v odličnem delovnem stanju in pripravljen za takojšnjo uporabo. ----- Pregled sistema KSA SQ1E je prenosna, z zrakom hlajena enota za preverjanje kakovosti pare, zasnovana za izvajanje preskusov ne-kondenzirajočih plinov (NCG), suhosti in pregrevanja v skladu s standardoma EN 285 in HTM. Predstavlja popolno, samostojno rešitev za validacijo čistih in čistih parnih sistemov, ki se uporabljajo v farmacevtski, biotehnološki ter zdravstveni industriji. V nasprotju s tradicionalnimi sistemi SQ1E uporablja vgrajen električni kondenzator s ventilatorjem, s čimer odpravlja potrebo po hladilni vodi ter omogoča izvajanje testiranj kjerkoli z minimalno pripravo. Kompaktna in vzdržljiva zasnova je idealna za terenska testiranja, validacije in kvalifikacijska dela s paro. ----- Glavne sestavine KSA SQ1E enota za preverjanje kakovosti pare – popolnoma z zrakom hlajen kondenzatorski sklop z vgrajeno bireto in merilnim valjem za testiranje NCG ter suhosti. Sklop za test suhosti in pregrevanja – vključuje ekspanzijsko cev, pitot cevi, bučko ter priključke za temperaturno sondo. Integrirana bireta in merilni valj – osvetljena in opremljena s funkcijama ničeliranja ter pavze z enim pritiskom za natančne meritve. Napajanje – 12 V DC pogon za ventilator kondenzatorja in notranjo elektroniko. Set za priklop na paro – vključuje tri-clamp in cevne priključke za povezavo s čistimi parnimi sistemi. Prenosni kovček – kompakten in robusten ohišje z ročajem in delovno polico za terenska testiranja. Navodila za uporabo in dokumentacija – vključuje standardne preskusne postopke, napotke za nastavitev in predloge za rezultate. ----- Ključne lastnosti Z zrakom hlajeni kondenzator odpravlja potrebo po zunanji hladilni vodi. Izvaja vse zahtevane teste kakovosti pare: ne-kondenzirajoči plini, suhost in pregrevanje. Vgrajena bireta in merilni valj za natančne, ponovljive meritve. Funkcija ničeliranja, pavza in osvetlitev za enostavno uporabo. Prenosna Plug & Play zasnova, idealna za validacijo in testiranje na lokaciji. Popolna skladnost z EN 285, HTM ter farmacevtskimi standardi za čisto paro. ----- Tehnične specifikacije Proizvajalec: KSA (Keystone Scientific / KSA Pharma) Model: SQ1E Tip: komplet za preverjanje kakovosti pare Napajanje: 12 V DC Način hlajenja: z zrakom hlajen kondenzator z ventilatorjem Funkcije: NCG, test suhosti in pregrevanja Delovanje: ročno/prenosno Lredsxqqyyspfx Ahusn Skladnost: EN 285, HTM, AAMI, PDA smernice Izvedba: elementi iz nerjavečega jekla in aluminija v robustnem prenosnem kovčku

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: ENZ 6CAL, Oprema: CE označba, Rabljena, delujoča klimatska komora ESPEC ESX-2CA, zračno hlajena. Čeprav ima ta model funkcijo vlažnosti, je ta izklopljena, zato deluje le kot temperaturna komora, z razponom od -70°C do +150°C. Hitrost hlajenja je 4,0°C na minuto. Notranje dimenzije (Š, G, V): 500 mm, 600 mm, 750 mm. Komora je opremljena s kalibracijo. Lredpfxowy Uq Rs Ahuon