Siegert Gz 20 Bis 60 Mm 500 Kg nakup rabljenega (114.564)

Stanje: dober (rabljeno), Leto izdelave: 2001, premer vijaka: 30 mm, razmak između stupova: 420 mm, tlak vbrizgavanja: 1.995 letvica, injekcijska masa: 96 g, minimalna višina orodja: 200 mm, Splošne informacije: Letnik proizvodnje: 2001 Nadzor: NC4 Masa: 3950 kg Dimenzije (dolžina × širina × višina): 4,2 × 1,4 × 2,0 m Vbrizgalna enota: Tip: … / 200 Premer vijačnega valja: 30 mm Razmerje L/D vijačnega valja: 20 Specifični tlak vbrizgavanja: 1995 bar Prostornina vbrizgavanja: 106 cm³ Masa vbrizgavanja: 94 g Zaklepni sistem: Tip: 60 / … Zaklepna sila: 60 t Dimenzije plošče: 600 × 600 mm Razdalja med stebri: 420 × 420 mm Iodpfx Akszt Ivdoyetk Višina kalupa: 200 mm Hod odpiranja: 550 mm Maksimalna razdalja med ploščami: 750 mm

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler model MG 50 T.V.E. 1200x1100x3500h for the compaction and formation of bales of soft waste materials, such as glass wool mats or similar. The MG 50 T.E. model features a fully enclosed compaction chamber; both the material loading door and bale extraction door can be opened. The electrical control panel is mounted on the side with integrated controls and comes with a 10 m extension cable, allowing it to be positioned away from the baler. The press plate is operated by a single cylinder with a 2700 mm stroke and is guided by 4 lateral sliding rails. Material is loaded from the front. The compaction cycle (downward and upward movement of the press) is automatic, operated by push button. - For transport, the machine is constructed in three sections: one of 2000 mm height, one around 2300 mm, and the cylinder, which will be assembled onsite. - Bale tying is preset-type, performed with the doors open, and is done manually; tying can be done with standard pre-cut wire or strapping through slots at the rear of the chamber. - Bale extraction is carried out using a forklift; dedicated channels at the base allow the forklift tines to be inserted. - The bale extraction door is closed via a handwheel, ensuring safe opening even with highly elastic materials; a microswitch ensures the door is securely closed before pressing. The upper door is equipped with a hydraulic lever closure with controls on the machine. - Can be installed against a wall; requires front access only for material loading and bale extraction. - The hydraulic circuit features a safety lock valve to prevent press plate descent. - The machine must be fixed to the ground and is positioned over a wash liquid collection tray. • Manufacturer / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Material pressing pressure: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: 1250 x 1150 mm, variable height (min 800, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Pressing chamber: 1200 x 1100 x 3500 mm • Loading opening: 1200 x 1800 mm • Ram stroke: 2700 mm, single extension • Operation: Automatic, push button • Cycle time (automatic): 130 seconds • Manual ties: 5 • Bale ejection: Removed with forklift • Hydraulic unit: Integrated in press • Motor power: 10 Hp (7.5 kW) • Supply voltage: 380V, 50 Hz • Overall dimensions: 2000 x 3500 x 7150 mm Ijdpfeyzr Nmsx Akyetk • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used vertical hydraulic baler, in excellent condition, sold as seen and approved.

Stanje: rabljeno, Leto izdelave: 1999, Transnorm Conveyor Belt GF 1200-600-500 RA2424 Technical specifications: Conveying length (NL): 1200 mm Frame width (NB): 600 mm, 800 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Support feet: optionally available Conveying speed (v m/s): 0.85 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.37 S1 Drive drum: Ø = 81 mm Return roller: Ø = 81 mm Weld seam will be re-welded prior to sale Optional extras: Supports Side guides (single-sided or double-sided) Frequency inverter for stepless speed adjustment Itodpfx Aksw Nap Noyjk Length modification (extension/shortening) Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual and professional advice, simply contact us. You can reach us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: zelo dobro (rabljeno), Key information: Type: Scissor lift table / lifting table Load capacity: 500 kg Condition: Used – fully functional Control: Handheld remote (up/down + emergency STOP) Power supply: 230/400V Year of manufacture: 2012 Price refers to: Complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Working pressure: 196 bar Weight: approx. 170 kg Tabletop dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: I am offering a professional hydraulic scissor lift – ideal for workshops, production facilities, and warehouses. This unit enables safe and convenient lifting of heavy objects to an ergonomic working height. Equipped with: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Included in the set: - Scissor lift table - Hydraulic power unit - Control remote 🚚 Shipping: - Pallet shipping - Personal collection possible Itedpfoyw Ua Tjx Akyok

Stanje: rabljeno, Leto izdelave: 2020, Transnorm Belt Curve Conveyor 90°-1400-1200 IR2500 LH RA2334 Technical Data: Manufacturer: Transnorm Condition: good (used) Conveying angle: 90° Nominal/outer width (NB): 1400 mm Belt width (GB): 1200 mm Inner radius (IR): 2500 mm Overall height (BH): 260 mm Motor height (MH): 450 mm Motor type: SEW geared motor Electrical data: 380–500 V, 0.55 kW Conveying speed: please contact us for a customised speed range Scope of delivery: without supports (supports available on request) Options: - Supports - Side guides - Frequency inverter for stepless speed control Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For customised, professional advice, please don't hesitate to contact us. You can reach us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Itjdpfjvizt Ssx Akyjk Your Dr. Sonntag GmbH & Co. KG Team Your specialist and consultant for intralogistics

Stanje: rabljeno, Leto izdelave: 1999, Transnorm Conveyor Belt GF 1200-600-500 RA2432 Technical Data: Conveyor length (NL): 1200 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Support legs: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.37 S1 Drive drum: Ø = 81 mm Return roller: Ø = 81 mm Optionally available: Supports Side guides, single-sided and double-sided Frequency inverter for stepless speed adjustment Length adjustment (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Please contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Itedpfx Aexiryxskyok Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: skoraj kot novo (rabljeno), nosilnost: 500 kg, doseg roke: 2.550 mm, ROBOTSKE ROKA ZNAMKA: ABB MODEL: IRB 7600 - 500 / 2.55 TEHNIČNI OPIS NOSILNOST: 500 KG MAKS. DOSEG: 2550 MM Iedozul H Nspfx Akyetk UPRAVLJANJE: IRC 5

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: nefunkcionalno, nosilnost: 6.500 kg, Lifting capacity 6,500 kg Note: Arm diameter adjustable from 1,880 mm to 4,550 mm (pivotable) Space-saving and continuously adjustable; the boom arms can be locked Speed infinitely variable from 0.001 to 5 rpm Motor power: 3 kW Torque: 15,000 Nm Height: 800 mm Maximum current transfer: 2,000 A Weight: 4,700 kg Comes with hand and dual foot remote control CE certificate, declaration of conformity, documentation, wiring diagram Itodpfxjx Thuco Akyok Includes original offer invoice from 2016 Current new price approx. €28,000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, številka stroja/vozila: 0-200-87-0913, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, največja debelina roba: 3 mm, vrsta nastavitve višine: električni, skupna dolžina: 10.825 mm, Oprema: dokumentacija / priročnik, Used single-sided HOMAG edge banding machine, for straight edges; for joint trimming, edge banding, and post-processing of various edging materials. Fixed stop side on the left. Year of manufacture: 2023, first commissioning: Nov. 2023 SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed unit, - Max. workpiece thickness: 60 mm - Motor-driven height-adjustable top pressure - Workpiece support with roller tracks - Glue pot lift-off at feed stop - Glue roller clamping before workpiece trailing edge - (Remote) manual control for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit with synchronized/opposing rotation, 2 x 3 kW, operation-controlled Horizontal positioning via NC motor (CAN) EDGING UNIT V20, comprising: - QA60 glue application unit, with PTFE (Teflon) coating - Premelter for PUR adhesive Iedpeztpw Nsfx Akyotk - Processes both EVA and PUR adhesives - Edging magazine, min. 0.4 mm to max. 3 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven, 4 non-driven pressure rollers POST-PROCESSING SECTION: - PK25 end trimming unit, horizontal, 2 motors each 0.8 kW (front/trailing edge) Chamfer/straight cut, as well as trim-cutting excess edging - Pre-/flush trimming unit 1.15 kW, top/bottom - Fine trimming unit top/bottom, with NC adjustments - Profile trimming unit MF60 (corner rounding), 2 motors (top/bottom) Servo-controlled with softtouch - Universal milling unit, controlled - Profile scraping blade top/bottom, with interchangeable heads - Flat scraping blade FA10, top/bottom (version with 3 tracing rollers) - Buffing unit top/bottom CONTROL SYSTEM: - PC 23 powerTouch - woodCommander 5 - Gap set-up function - Edge tracking control

Stanje: novo, Leto izdelave: 2026, Največja razdalja med centri 1500 mm Največja višina med centri 210 mm Premer obdelovanca nad posteljo 500 mm Premer obdelovanca nad vdolbino 710 mm Premer obdelovanca nad pomičnim nosilcem 300 mm Širina postelje 405 mm Premer vretena 82 mm (D8) Stožčasta povezava vretena 90° (1:20) Območje vrtljajev 9 – 1600 vrt/min Največja velikost orodja 25 × 25 mm Podajalna hitrost v vzdolžni smeri 0,028 – 6,43 mm Podajalna hitrost v prečni smeri 0,012 – 2,73 mm Metrični navoj 0,5 – 224 mm / 48 stopenj Palčni navoj 56 – 1/4 TPI / 45 stopenj Modularni navoj 0,5 – 112 mm / 42 stopenj Itsdjzr I H Hopfx Akyek DP-navoj 56 – 1/4 DP / 45 stopenj Premer vretena 75 mm Hod vretena 150 mm Stožčasta povezava podpornega nosilca MK5 Moč motorja (S1/S6) 7,5 / 9 kW (10 KM) Moč črpalke (S1/S6) 0,1 / 0,12 kW Dimenzije stroja (D × Š × V) 2700 × 1150 × 1800 mm Teža 2850 kg Večji model (660 × 2000 mm) je na voljo po ceni 14.800 € neto.

Stanje: dober (rabljeno), na voljo za prodajo: več rabljenih prijemnih okvirjev/vrtalnih okvirjev širina 1500 do 1800 mm višina 2500 mm globina 1250 mm masa: 5,8 t nosilnost 60 t na voljo 6 kosov Isdpfxsg Sbbxe Akyetk delno opremljeni z dostopom po stopnicah

Stanje: rabljeno, Leto izdelave: 2013, uporablja se za izdelavo notranjih oblog, stroj za vakuumsko oblikovanje BL 2200x900x600-NG-EL-PF-DX, leto izdelave 2013, serijska številka C1091, napetost 380V-N-50Hz+PE Povzetek tehničnih specifikacij stroja Dimenzije oblika in pločevine Maksimalne notranje dimenzije okvirja: 2205 × 905 mm Maksimalna velikost osnove kalupa: 2200 × 900 mm Minimalna velikost osnove kalupa: 700 × 500 mm Maksimalna velikost pločevine: 2290 × 960 mm Minimalna velikost pločevine: 790 × 560 mm Maksimalna višina kalupa: 850 mm (600 + 250 mm) Maksimalna višina oblikovanega dela: 600 mm Maksimalna višina sklada pločevin: 1000 mm Višina sklada nosilcev pločevine: 144 mm Zahteve za električno moč Zgornja moč grelnega elementa: 93,8 kW Spodnja moč grelnega elementa: 80,3 kW Motorji za oblikovanje: 23,2 kW Motor za prenos pločevine: 4,6 kW Motorji za uravnavanje transportnega nosilca: 0,6 kW Motorji za napravo za centriranje pločevine: 0,36 kW Motorji za prevzem pločevine: 3,0 kW Motor hladilnega ventilatorja: 5,5 kW Motor sesalnega ventilatorja: 0,25 kW Motorji za prenos pri razkladu: 3,0 kW Motorji skupine za rezanje (giljotin): 8,1 kW Motor transportnega traku: 0,75 kW Termoregulacijske enote: 25,65 kW Hladilna enota: 16,25 kW Maksimalna poraba dodatne opreme: 3,89 kW Maksimalna nameščena moč: 269 kW Tipična delovna moč (50-odstotna obremenitev): 135 kW Pnevmatski sistem Kapaciteta rezervoarja za oblikovanje: 2 m³/cikel Tlak pnevmatskega sistema: 600 kPa Poraba zraka (VGS): 0,85 m³/cikel Poraba zraka (premiki): 0,35 m³/cikel Poraba zraka (hlajenje): 0,90 m³/cikel Poraba zraka (oblikovanje pod tlakom pri 200 kPa): 3,2 m³/cikel Skupna poraba zraka: 4,85 m³/cikel Mehanske lastnosti Sila zapiranja plošče za oblikovanje: 400.000 N (400 kN) Maksimalna teža kalupa + redukcijskega okvirja: 2.200 kg Teža stroja: 30.000 kg (30 ton) Hladilna enota za vodo Kapaciteta rezervoarja za hladilno sredstvo: 240 litrov + cevovodi Tlak dovoda vode: > 0,1 kPa Iedpfx Akszumrmoystk Tlak odtoka vode: 0 kPa Temperatura dovoda vode: 20 do 25 °C Potrebna oprema Električno napajanje: nameščena obremenitev 269 kW Stisnjen zrak: tlak 600 kPa, poraba 4,85 m³/cikel Hladilna voda: temperatura dovoda 20–25 °C Rezervoar za hladilno vodo: minimalna kapaciteta 240 litrov Popolnoma avtomatski stroj za termooblikovanje, zasnovan za oblikovanje plastičnih pločevin do velikosti 2200 × 900 mm z maksimalno globino oblikovanja 600 mm, primeren za industrijske aplikacije z visoko zmogljivostjo. Podrobnosti stroja za termooblikovanje: Območje oblikovanja 2200 mm x 900 mm Maks. globina oblikovanja 600 mm 3 x postaje za nakladanje. 1 x grelna postaja - (predgretje, končno gretje, zgornji in spodnji elementi) keramični/kvarčni infrardeči elementi. Oblikovanje pod tlakom in vakuumom. 4 x stranske postaje za obrezovanje (rotacija). Giljotina. Končna postaja za zbiranje odrezkov. Avtomatizacija: Popolnoma avtomatska obdelava v serijah z nadzorno ploščo operaterja, ki ima ročne/avtomatske načine. Industrijska izvedba z več dostopnimi vrati, okni za opazovanje in integriranim sistemom za uravnavanje temperature. Uporaba – Za okolja z visoko proizvodnjo je ta stroj COMI idealen za proizvodnjo notranjih oblog hladilnikov, plošč vrat, zabojnikov in drugih termoplastičnih komponent, kjer so dosledna kakovost, obdelava velikih pločevin in ponovljivi cikli oblikovanja bistveni.

Stanje: rabljeno, Leto izdelave: 2008, Transnorm predpasnični transportni trak s prenapetostnim pogonom GF 1720/1700/1650/1200/1000-700/600-600/500 RA2468 (NL-NB-GuB) Tehnični podatki: Transportne dolžine (NL): 1720, 1700, 1650, 1540, 1200, 1000 mm Širina okvirja (NB): 700 ali 600 mm Širina traku (GuB): 600 ali 500 mm Višina konstrukcije (BH): 80 mm Kot: prosto nastavljiv med 0 in 15° Iedpfxeyi Inaj Akystk Podporno stojalo: na voljo opcijsko Pogon: prenapetostni Pogonski boben: Ø = 81 mm Vračalni valj traku: Ø = 81 mm Možnosti po naročilu: Stojala Bočno vodilo enostransko ali obojestransko Prilagoditev dolžine (daljša/krajša) Cene neto, brez DDV, iz centralnega skladišča Dr. Sonntag GmbH & Co KG, 97076 Würzburg Za individualno, strokovno svetovanje nas kontaktirajte. Dosegljivi smo po telefonu ali e-pošti. Radi vam bomo pomagali pri načrtovanju in realizaciji vaših projektov. Veselimo se vašega klica. Lep pozdrav, Ekipa Dr. Sonntag GmbH & Co. KG Vaš strokovnjak in kontaktna oseba za intralogistiko.

Stanje: rabljeno, Control: Fagor Faceplate diameter: 5,420 mm Swing diameter: 6,540 mm Max. turning height: 3,500 mm Support (Ram) vertical travel: 1,680 mm Isdpfxevzqm Eo Akyotk Support (Ram) horizontal travel: 3,250 mm Workpiece weight: 60 tons Machine weight: approx. 190 tons Hydrostatic faceplate

Stanje: rabljeno, Paralelni stružnica MULLER & PESANT Razdalja med konicama: 2500 mm Največji Ø nad posteljo: 520 mm Največji Ø nad sani: 280 mm Največji premer v izkopani postelji: 700 mm Iodpfxjzmwqke Akyotk Premer vretena: Ø 56 mm Hitrost vretena: od 12,5 do 1000 vrt/min TRIPAN revolverska glava Tročeljustna vpenjalna glava Ø 250 mm Konjiček CM4 Samodejna podajalna vzdolžna in prečna Črpalka za mazanje Napetost: 380 V Dimenzije (D x Š x V): 4000 x 1500 x 1600 mm Teža: cca 3,5 t

Stanje: dober (rabljeno), Transportni valji, transportni valčki, rezervni valji, tračni transporter, valjčna proga, nosilni valji -Transportni valji: transportni valjčki premera 60 mm -Transportna širina: 500 mm -Ležišča: 15/12 mm glej slike -Količina: 48 kosov na voljo -Cena: na kos -Dimenzije: Ø 60 x 530 mm Iedpfx Akjy Tvchoystk -Teža: 2,2 kg/kos.

Stanje: rabljeno, T-slot plate, clamping plate with T-slots, plate field, welding table - Dimensions: 1500 x 3516 x 260 mm (H) Itjdpfx Ajcbqqijkyok - Plate thickness: 30 mm - Plate features: with support ribs - 1x T-slot: 17 mm - Weight: 1800 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, Electro-magnetic clamping plate including electronic polarity reversing control unit, control unit, and keypad complete. Please contact us if you are interested! Itjdpfslbggtex Akysk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150 350, skupna višina: 4.600 mm, nastavitev hidravličnega cilindra: 150 mm, vgradna višina: 550 mm, višina mize: 1.000 mm, skupna širina: 3.000 mm, skupna dolžina: 4.200 mm, prebojna odprtina v mizi: 1.400 mm, dolžina mize: 3.000 mm, širina mize: 1.250 mm, stiskalna sila: 250 t, višina krmilne omare: 2.000 mm, dolžina elektro omare: 6.800 mm, širina krmilne omare: 600 mm, vrsta vhodnega toka: trifazni, hod: 180 mm, nastavitev hoda: 20 mm, vhodna napetost: 400 V, razdalja med stranskimi nosilci: 810 mm, razdalja med stojali: 2.020 mm, skupna masa: 45.000 kg, krmilna napetost: 24 V, leto zadnje generalne obnove: 2026, vhodna frekvenca: 50 Hz, POZOR: Pred dostavo bo stroj temeljito očiščen. Obloge bodo popravljene, če je to mogoče in smiselno. Itsdpfozrwzaex Akyok Sila stiskanja: 2500 kN Nastavljiva hod: 40 – 180 mm Nastavitev potisne palice: 150 mm Število hodov: 20 – 150/min Namestitvena višina za pritrdilne elemente: 550 mm Dimenzije mize: 2000 x 1250 mm Dimenzije potisne palice: 2000 x 1000 mm Nova krmilna enota SIEMENS S7 300, 1. generacija, izvedba krmilne enote v skladu s predpisi VW. Po želji lahko stroj popolnoma obnovimo tudi pri podjetju ANDRITZ Kaiser, z novo krmilno enoto S7 1500.

Stanje: rabljeno, For inquiries regarding attachments, Mr. Herden (by phone) will be happy to assist you. Holp Profile Bucket / PL.120.150 / OQ60-5 / 1,500 mm cutting width / HARDOX / NEW / in stock & immediately available Iodsy T Uvaopfx Akyjtk Price: €3,605.00 net / €4,289.95 gross - Suitable for excavators up to: 12 t - Approximate own weight: 450 kg - SAE capacity: 540 liters - Cutting width: 1,500 mm - Rear width: 900 mm - Bucket made entirely from HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage when rotating the bucket thanks to beveled corners - Optimal design with multiple bends - Robust substructure - Minimal weight through optimized construction - Perfect material flow within the bucket - Extended bucket bottom for optimal filling - Durable, Hardox 450 cutting edge Whenever precision is essential, the Profile Bucket provides the perfect finish in a single workflow: No other bucket shapes and profiles with comparably high precision and efficiency for your tasks as this field-tested special bucket. We carry a large selection of various Holp products in stock for immediate delivery! Please contact us at / . Financing offers available upon request. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Holp range! Subject to errors and prior sale! = Further information = New: Yes Application: Construction Unladen weight: 450 kg Contact Marius Herden for more information.

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, skupna širina: 540 mm, skupna dolžina: 1.050 mm, skupna masa: 10 kg, širina transportnega traku: 500 mm, notranji polmer: 800 mm, zunanji polmer: 1.600 mm, TAF številka artikla: 1000005015 Proizvajalec: neznan Leto izdelave: neznano Skupne mere (D x Š x V) v mm: 90° x 1.050 x 70 Širina z robom v mm: 540 Višina roba v mm: 60 Transportna širina v mm: 500 Podkonstrukcija: ni prisotna Radij zavoja (stopinje): 90° Notranji radij zavoja v mm: 800 Zunanji radij zavoja v mm: 1.600 Tip osi nosilnega valja: navojna palica M8 / matica M8 Premer nosilnega valja v mm: 50 Nosilni valji na os: 1 Material nosilnega valja: plastika Razmak med valji, notranji v mm: 55 Razmak med valji, zunanji v mm: 100 Pogon: gravitacijski Neto teža v kg: 10 Itedpfxowylzae Akyek Funkcionalni test: rabljeno, popolnoma delujoče Stanje: v redu

Stanje: rabljeno, Clamping plate, fixture carrier, machined surface, welding table -Clamping surface width: 500 mm -Clamping surface length: 10,930 mm -Clamping surface height: 262 mm -Working height: 262 mm -Price: per piece Isdpfx Akob Uhpioyotk -Quantity: 1 available -Transport dimensions: 11,370/510/H240 mm -Weight: 2,020 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6146945, Leto izdelave: 2011, obratovalne ure: 5.967 h, nosilnost: 1.250 kg, dvižna višina: 4.550 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.060 mm, dolžina vilic: 1.150 mm, vrsta pogona: Elektro, Hochhubwagen Chassis number: 6146945 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Description: BT SPE160L – Electric high-lift stacker with triplex mast and 1,150 mm forks Year of manufacture: 2011 | Operating hours: 5,967 h | Lifting capacity: 1,250 kg Reliable BT SPE160L high-lift stacker with triplex mast and standard 1,150 mm forks – ideal for warehouses, racking systems, and internal transport tasks. The machine is fully operational, ready for immediate use, and in good technical and visual condition. Specifications: Type: High-lift stacker Make: BT Ijdpfxoxzvwre Akyetk Model: SPE160L // 1,150 mm forks Year of manufacture: 2011 Operating hours: 5,967 h Lifting capacity: 1,250 kg Mast type: Triplex Lift height: 4,550 mm Closed height: 2,150 mm Fork length: 1,150 mm Battery: included Charger: available upon request Condition: technically and visually good Location: available immediately Notes: Sold as-is, in current used condition All prices are net plus 19% VAT Sale to business customers only with valid VAT ID No warranty or guarantee

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, številka stroja/vozila: 110-014358, skupna dolžina: 6.000 mm, skupna širina: 2.240 mm, nosilnost: 12.500 kg, delovna višina: 6.000 mm, Abus 12.500 KG enojni mostni žerjav v zelo dobrem stanju. - Razpon: 5740 mm med središči - Dvižna zmogljivost: 12.500 KG - Dvižna višina: 6 m - Leto izdelave: 2011 - Žično upravljanje Dostava, izdelava po meri, postavitev, preizkus in zagon so možni po dogovoru. Ni ta žerjav tisto, kar iščete? Na zalogi imamo več kot 100 žerjavov in +3.000 m² rezervnih delov. Ni vsa zaloga prikazana na spletu. Pokličite ali pišite nam, če imate vprašanja. Prodajamo med drugim: - Mostne žerjave Itodpfey Uwubjx Akysk - Podviseče žerjave - Stolpne in vrtljive žerjave - Verižne dvigalke - Demag KBK tirnice in dodatke - Dolžinske napajalnike Ključne besede: mostni žerjav, dvoranski žerjav, Abus, Demag, Kone, Konecranes, Stahl

Stanje: rabljeno, Technical details: Width: 500 mm Itsdou S H Nljpfx Akysk Depth: 260 mm Height: 795 mm Machine weight approx.: 320 kg per unit 2 units available (price per unit) without T-slots Base clamping long hole Ø 39 x 130 mm