Rps Fas096 nakup rabljenega (95)

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. Pgedjtmqi Dspfx Anpsu A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Leto izdelave: 2020, stanje: novo, Pnevmatski priključek 1 " • Nadzira 7-palčno barvno ploščo na dotik • Prostornina posode za barvo 6-7 kg Pgjdpofz U Swsfx Anpeu • Poraba zraka med barvanjem 15Nm3 / h • Poraba zraka za čiščenje 350Nm3 / h • Senzor nivoja barve lijaka Da • Ultrazvočni zaslon Da • brizgalke v prahu do 12 kosov Opis • RP-01 črpalka za dolivanje barve s svežo barvo iz kartona • Dva načina delovanja, obnavljanje barve z mešanjem ali skupni odpadki • Zaprti lijak za fluidizacijsko barvo • Samodejni program za čiščenje rezervoarja in injektorjev s stisnjenim zrakom • Sestav senzorja nivoja praška v lijaku • Samodejno polnjenje pladnja z barvo iz kartona • Senzor nivoja barve v škatli za ponovno polnjenje • Zvočni alarm opozori operaterja, če je v škatli malo barve • Center je povezan s krmiljenjem kabine prek protokola ModBus • Programabilni sesalni ventil za prah, ki ohranja središče prahu čisto

Leto izdelave: 2020, stanje: novo, Pnevmatski priključek 1 " • Nadzira 7-palčno barvno ploščo na dotik • Prostornina posode za barvo 6-7 kg • Poraba zraka med barvanjem 15Nm3 / h • Poraba zraka za čiščenje 350Nm3 / h • Senzor nivoja barve lijaka Da • Ultrazvočni zaslon Da • brizgalke v prahu do 12 kosov Opis • RP-01 črpalka za dolivanje barve s svežo barvo iz kartona • Dva načina delovanja, obnavljanje barve z mešanjem ali skupni odpadki • Zaprti lijak za fluidizacijsko barvo • Samodejni program za čiščenje rezervoarja in injektorjev s stisnjenim zrakom • Sestav senzorja nivoja praška v lijaku • Samodejno polnjenje pladnja z barvo iz kartona • Senzor nivoja barve v škatli za ponovno polnjenje Pedpsfz Dknsfx Anpsgu • Zvočni alarm opozori operaterja, če je v škatli malo barve • Center je povezan s krmiljenjem kabine prek protokola ModBus • Programabilni sesalni ventil za prah, ki ohranja središče prahu čisto

Leto izdelave: 2020, stanje: novo, Pnevmatski priključek 1 " • Nadzira 7-palčno barvno ploščo na dotik • Prostornina posode za barvo 6-7 kg • Poraba zraka med barvanjem 15Nm3 / h • Poraba zraka za čiščenje 350Nm3 / h • Senzor nivoja barve lijaka Da • Ultrazvočni zaslon Da • brizgalke v prahu do 12 kosov Opis • RP-01 črpalka za dolivanje barve s svežo barvo iz kartona Psdpfx Anefz U Rcjpegu • Dva načina delovanja, obnavljanje barve z mešanjem ali skupni odpadki • Zaprti lijak za fluidizacijsko barvo • Samodejni program za čiščenje rezervoarja in injektorjev s stisnjenim zrakom • Sestav senzorja nivoja praška v lijaku • Samodejno polnjenje pladnja z barvo iz kartona • Senzor nivoja barve v škatli za ponovno polnjenje • Zvočni alarm opozori operaterja, če je v škatli malo barve • Center je povezan s krmiljenjem kabine prek protokola ModBus • Programabilni sesalni ventil za prah, ki ohranja središče prahu čisto

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7600-101325, nosilnost: 340 kg, doseg roke: 2.800 mm, vrtilni razpon: 360 °, trajanje garancije: 4 meseci, Oprema: dokumentacija / priročnik, Robot with 4 months warranty Complete overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Replacement of oils for all six axes. - Battery replacement: All internal batteries were replaced with new ones. - Mechanical maintenance: Gears and counterweight were inspected and serviced based on repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, programming pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in its original color or a custom color of your choice. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Controller: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 rotations Pgsdpfozdrx Rex Anpou Dynamics (max. rotational speed per axis) Axis 1: 75 °/s Axis 2: 60 °/s Axis 3: 60 °/s Axis 4: 100 °/s Axis 5: 100 °/s Axis 6: 160 °/s Positioning and path precision Positioning accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization time (Pst at ±0.4 mm): 0.18 s Path accuracy (AT): 2.05 mm Path repeatability (RT): 0.23 mm FEATURES - 6-axis industrial robot with high payload capacity - Large swivel range on axis 6 with up to 67 rotations - Precise path control with less than 0.3 mm repeatability - High wrist axis speeds for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. Psdpfx Ajpugwijnpegu The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-6150-H075 ojačevalnik PS 75HV SN V11358412, rabljen, običajni znaki uporabe, 100% delujoč, obseg dobave kot na slikah. Pgodpfx Ansx Ergajpeu

Stanje: rabljeno, Technical Details: X-travel: approx. 1000 mm y-travel: 400 mm z-travel: 420 mm Control: Siemens Sinumerik 805/810 Thread cutting up to max.: M 22 Drilling capacity in St 60 - through drilling: 25 mm Milling range: performance in St 60: 150 mm Saw stroke: approx. 55 mm Spindle speed range - stepless: 20-6000 rpm Operating hours: manual 26,180 h Tool turret: 12 stations Tool holder: SK 40 Total power requirement: 18 kVA Machine weight approx.: 5.0 t Machine dimensions LxWxH: 2.9 x 2.5 x 2.8 m Transport dimensions (machine): 2.4 x 2.6 x 2.75 m Equipment: - Special equipment/device (modular clamping system) for milling of profile materials with an automatic cut-to-length device for workpieces using a circular saw module (non-functional) - Horizontal workpiece clamping (force-fit) with vise clamping system and parallel bars (currently approx. 80 mm) - Tool changer type Chiron basket-type tool changer - Mechanical tool clamping lock, pull-in force 5000 N - Chip conveyor, make: Knoll - Loading and unloading system FMB LM RP 3000 Psdpfxsu Idnmo Anpogu The machine is not operational. Sale is at the indicated disposal price.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 280 letvica, vrsta vhodnega toka: Klimatska naprava, kapaciteta rezervoarja: 360 l, vhodna napetost: 400 V, potrebna višina: 1.600 mm, zahteva za prostor dolžina: 1.400 mm, potrebna širina: 1.400 mm, zmogljivost črpalke: 68 l/min, največja hitrost vrtenja: 1.480 obr/min, moč: 11 kW (14,96 KM), Hydraulic Power Unit Manufacturer: Rexroth Mecman AB Model: A10V 0 45 DFR /31R-PSC62K01 Year of Manufacture: 1998 Condition: Very good (used) Functionality: Fully operational Pump Manufacturer: Rexroth Pump Type: A10V 0 45 DFR /31R-PSC62K01 Max. Pump Speed: 2,600 rpm Pressure Regulator: With hydraulic flow control, X-T open Rotation Direction: Viewed on drive shaft, right-hand Flow Rate: 2 x 68 litres/min at 1,450 rpm Operating Pressure: max. 280 bar Oil: ISO VG 46 Drive Power: 2 x 11 kW Electric Motor Speed: 1,450 rpm Input Voltage/Frequency: 400 V / 50 Hz Tank Capacity: 360 litres Pressure Accumulator Capacity: 32 litres The unit is equipped with the following components: • 32-litre pressure accumulator • Dual filter unit with pump • Digital pressure transmitter • Dryer • Solenoid valves • Oil/water heat exchanger • Drip tray • Terminal box Dimensions (L/W/H): 1,400 mm / 1,400 mm / 1,600 mm Weight: 850 kg Variable displacement axial piston pump in swash plate design for hydrostatic drives in open circuit. The flow rate can be set in proportion to the drive speed and the displacement volume. Stepless flow adjustment is possible by varying the swash plate angle. 2 case drain ports Good suction characteristics Low noise level Long service life Favourable power-to-weight ratio Versatile control range Pgodpfx Anex Szxlopou Short response time The through drive is suitable for mounting gear pumps and axial piston pumps up to the same nominal size, i.e. 100% through drive.

Leto izdelave: 2009, stanje: novo, Belt dimensions: 2000 x 100 mm Podpfxox Davs Anpegu Belt speed: 30 m/s Angle adjustable from 30° to 90° Power: 3 kW, 400 V 50 Hz Weight: 200 kg Grinding rollers for pipe diameters: 3/4", 1/2", 1", 1 1/4"

Stanje: novo, Working width 4000 mm Working height 2600 mm Number of press cylinders: 6 pcs. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000 ----- CE version Robust frame welded construction made of thick-walled special hollow profiles. Sliding carriage and pressure beam with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical press cylinders on special pressure beam with single-hand rapid adjustment and weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment via ball-bearing carriage with central locking, fixing in 50 mm hole grid. Upper horizontal press cylinder infinitely height-adjustable and equipped with weight compensation. Lower horizontal press cylinder with centering bores for both abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, with 2 vertical press cylinders, d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-hand rapid adjustment; 2 horizontal press cylinders, d = 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, manometer, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg vertical press pressure, with 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine includes the following options: ----- Article ,00 pcs Central pressure beam with press cylinder, double-acting, weight compensation, pressure hose and shut-off valve, up to 2600 mm high Article ,00 pcs Individual pressure control for central pressure beam, pressure range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Cross-pressing device complete with press cylinder, double-acting, weight compensation, pressure hose, and shut-off valve; weight compensation at the lower horizontal cylinder omitted Article ,00 pcs Individual pressure control for cross-pressing device, pressure range up to max. 100 bar (for pressing cross-bar windows) Pedeu Uvalopfx Anpegu Article ,00 pcs Shut-off valve on the 3rd vertical cylinder Article ,00 pcs Shut-off valve on the upper horizontal cylinder Article ,00 pcs Width compensation insert for pressing small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles (height requirement increases by 100 mm) Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device consisting of: locking device for the vertical pressure beams and 3 attachable, laterally guided articulated pressure plates Article ,00 pcs Double articulated pressure plate for special-shaped windows (triangle) ----- Total price for the above configuration ex works: On request! -----

Stanje: dober (rabljeno), Platform truck, transport trolley, heavy-duty wagon, table trolley, assembly trolley, industrial trailer, container dolly, roll/cargo trailer Pgjdpfx Ajl Tuu Ionpeu - Manufacturer: Bartels, heavy-duty industrial trailer type RP - Platform: 2000/1000/H340 mm - Load capacity: approx. 2000 kg - Tyres: solid rubber - Dead weight: 70 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Wide slot die Serial No.: L 1081-041391 // Smoothing unit Serial No.: F 1201-041392 Take-off unit Serial No.: F 1201-041392-T Max. winder speed: 50 m/min. Type: Film line with 1080 mm usable width Psdpjw Tbr Hefx Anpogu Equipment / Further details: Max. gross PP output up to 1000 kg/h with film width up to 1200 mm Special feature: winder system allowing the slitting of narrow films (150 mm - 100 mm) or, for example: 8 x 175 mm or 2 x 700 mm A die lip for maximum film thickness up to 2 mm, up to 1000 kg/h. Total power consumption: 211 kW/h Main motor capacity: 250 kW Min. film thickness in PS: 0.68 mm / Min. in PP: 0.75 mm Maximum calender speed: 50 m/min mechanically possible Consisting of: - Maguire 5-compartment dosing unit - Extruder (screw dia. 160 mm) Amut EA 160 // Year: 2003 - Screen changer (for cleaning in food production) - Melt pump - Wide slot die (1 insert) 120 cm - Die lip for film thickness up to 2 mm, up to 1000 kg/h - Calender 140 cm - Thickness gauge SBI TMD-EC/140.20.200.R - Post-cooling rollers (4 pcs.) - Winder (film buffer during roll change) - Cutting machine & film haul-off - Film winding unit (3 pcs.) - Mill MAZZA CBS 25 40 2T18 // Year: 2003 Complete available infrastructure: control cabinets, pumps etc.

Stanje: dober (rabljeno), Ročna hidravlična črpalka, ročna črpalka, hidravlični cilinder, ročna hidravlična črpalka, visokotlačna črpalka, visokotlačna ročna črpalka, ročna hidravlična črpalka, hidravlična črpalka - Proizvajalec: RARIPRESS, ročna hidravlična črpalka/visokotlačna črpalka - Tip: RP 62C - Tlačno območje: maks. 700 bar Podpfjyzmvhox Anpjgu - Količina: 1x ročna črpalka na voljo - Dimenzije: 580/185/H180 mm - Teža: 14,7 kg

Stanje: dober (rabljeno), Power supply Pgjdpfx Ajb A Ntnenpju -Type: RPS -Weight: 13 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 80 kW (108,77 KM), nosilnost: 400 kg, Serija MIZAR PRP - Granulator bakrenih žic in obrat za recikliranje kablov Pgodpfxsyy Rice Anpeu Rešitev na ključ za maksimalno predelavo bakra (99 % čistost) Serija MIZAR PRP je popolnoma avtomatska linija za recikliranje kablov, zasnovana za predelavo kompleksnih, mešanih in kontaminiranih kablov v visokozmogljive zrnca bakra in plastike. Zgrajena za 24/7 industrijsko uporabo, zagotavlja hitro povrnitev naložbe (ROI), nizke operativne stroške in maksimalno učinkovitost. 7-STOPENJSKO NATANČNO LOČEVANJE (100 % suh postopek) • Drobilnik (SSH): Predhodno drobljenje za kosovne kable. • Magnetni separator (OMS): Ekstrakcija železnih kovin. • Granulator (FGR): Fino zmanjševanje velikosti. • Cik-cak separator (ZZS): Zračno ločevanje lahkih frakcij. • Turbo mlin (TRM): Izjemno fino mletje za kompleksne žice. • Denzimetrični separator (DES): Končno ločevanje čistega bakra na podlagi gostote. • Zbiralnik prahu (DTF): Čisto, okolju prijazno delovanje. OBDELANI MATERIALI Inštalacijski kabli (Twin & earth), fleksibilni, telekomunikacijski (Cat 5/6), kompleksni avtomobilski snopi, podzemni, koaksialni in mešani kabli OEEO. PALETA MODELOV IN TEHNIČNE SPECIFIKACIJE (Izberite idealno zmogljivost za vaš obrat) • PRP S1: Do 400 kg/h | Skupna moč: 80 kW | Tloris: 50 m² • PRP M1: Do 800 kg/h | Skupna moč: 135 kW | Tloris: 100 m² • PRP L1: Do 1300 kg/h | Skupna moč: 200 kW | Tloris: 120 m² • PRP XL1: Do 2000 kg/h | Skupna moč: 300 kW | Tloris: 140 m² GLAVNE PREDNOSTI • Do 99 % čistost bakra • Pametna avtomatizacija PLC z neprekinjenim dovajanjem • Na vibracije optimizirano, robustno ohišje • Certifikati CE, ISO 9001, 14001, 45001, 27001 Potrebujete rešitev po meri? Pišite nam za prilagojeno postavitev, tehnične risbe ali pošljite svoj material za preizkus zmogljivosti. Mizar Recycling Machinery

Stanje: novo, Prodajam profesionalni nosilec za zračno dihalno napravo Dräger PSS 7000 • Model: PSS 7000 • Manometer: do 300 bar • Part No: 3355850 • Type No: 3355068 Pgjdpfx Asz Smy Ssnpou • Tehnično stanje: dobro • Komplet pasov in zaponk • Trden okvir brez razpok Prodajam točno to, kar je na slikah. Brez jeklenke in maske. Oprema za gasilce – najvišja serija Dräger.

Stanje: novo, Leto izdelave: 2026, skupna masa: 3.000 kg, moč: 35 kW (47,59 KM), premer gredi: 400 mm, trajanje garancije: 12 meseci, MIZAR Eko Serija - Eko obrat za recikliranje kablov in granulator bakrenih žic Visoko čisto pridobivanje bakra z minimalno porabo energije Seria ERP (Eco Recycling Plant) je najnovejša inovacija podjetja Mizar na področju okolju prijaznega recikliranja kablov. Ta visoko zmogljiv sistem, zasnovan za zagotavljanje maksimalnega izkoristka bakra z minimalno porabo energije, ponuja prostorsko varčno in trajnostno rešitev za ločevanje kovinskih in plastičnih komponent iz odpadnih kablov z do 99-odstotno čistostjo. GLAVNE KOMPONENTE (Napreden sistem 3-v-1) • Fini granulator (FGR): Natančno zmanjšanje velikosti za pripravo odpadnih kablov na optimalno ločevanje. • Denzimetrični separator (DES): Natančna suha klasifikacija na podlagi gostote za končno ločevanje čistega bakra in plastike. • Zbiralnik prahu (DTF): Centraliziran filtrirni sistem, ki zagotavlja čist, brezprašen in okolju prijazen delovni prostor. GLAVNE PREDNOSTI IN LASTNOSTI • Okolju prijazno in energetsko učinkovito: Optimiziran pretok materiala drastično zmanjša porabo energije, hkrati pa ohranja visoko prepustnost. • Pametno delovanje: Vmesnik z zaslonom na dotik, krmiljen s PLC-jem, za spremljanje v realnem času in enostavno upravljanje. • Kompaktno in vsestransko: Prostorsko varčna zasnova, ki odlično deluje kot samostojen granulator bakrenih žic ali kot del večje linije za recikliranje. • Visoka vzdržljivost: S certifikatom CE in izdelano iz vrhunskih materialov za dolgotrajno industrijsko uporabo. Pgedpfx Asz Erbxsnpsu PALETA MODELOV IN TEHNIČNE SPECIFIKACIJE • ERP S1: Zmogljivost: Do 400 kg/h | Skupna moč: 30 kW | Rotor: 350x400 mm | Rezila (R+S): 7+2 • ERP M1: Zmogljivost: Do 800 kg/h | Skupna moč: 50 kW | Rotor: 350x800 mm | Rezila (R+S): 14+4 • ERP L1: Zmogljivost: Do 1.300 kg/h | Skupna moč: 72 kW | Rotor: 350x1200 mm | Rezila (R+S): 21+6 • ERP XL1: Zmogljivost: Do 2.000 kg/h | Skupna moč: 102 kW | Rotor: 350x1600 mm | Rezila (R+S): 28+8 Ste pripravljeni optimizirati recikliranje kablov z okolju prijazno tehnologijo? Stopite v stik z nami za ponudbo po meri, tehnične risbe ali dogovor za preizkus zmogljivosti. Mizar Recycling Machinery

Stanje: novo, Leto izdelave: 2026, Ich verkaufe diese KUSING RP-OP-600 3.0 Längs- und Kantensäge der Mittelklasse. Diese Maschine eignet sich für kleinere Bearbeitungsvorgänge, hauptsächlich von Plattenmaterial. Die Maschine ist in folgenden Ausführungen erhältlich: FIX = Feste Sägeblattgröße MANUAL = Manuell verstelltes Sägeblatt EL DIGITAL = Elektrisch verstelltes Sägeblatt mit digitaler Messung. Maschinenparameter: Maschinenabmessungen (L x B x H): 1400 x 1700 mm Arbeitshöhe: 830 mm Einzugsbreite: 700 mm Maximale Schnitthöhe: 80 mm Wellendurchmesser: 50 mm Aktive Spindellänge: 550 mm Werkzeugdurchmesser: 300 mm Spindeldrehzahl: 4000 U/min Vorschubgeschwindigkeit: 4–18 m/min / 6–30 m/min Pedpfxox Utyae Anpegu Vorschubmotor: 0,55 kW Anzahl Zugrollen: 3 Anzahl Druckrollen: 2 Hauptmotorleistung: 7,5 / 11 / 15 / 18 kW Anzahl Positionierscheiben: 1 + 1

Stanje: rabljeno, Cold-conductor relay, contactor, solid-state contactor, contactor, relay, signal isolator, power supply -Manufacturer: Phoenix Contact, signal isolator / power supply OVP -Type: MCR-PS-24DC/10DC Part no.: 27 66 68 5 -Quantity: 2x relays available Pgjdpfeldk Ivox Anpou -Price: per piece -Box dimensions: 115 x 110 x H30 mm -Weight: 0.1 kg/pc.