Reishauer G 1 1/4 Zoll nakup rabljenega (110.844)

Stanje: zelo dobro (rabljeno), Profesionalni knjižarski vrtalnik priznane nemške družbe Constantin Hang Maschinenfabrik Göppingen. Model 114-4 je opremljen s 4 vrtalnimi glavami, namenjenimi za natančno vrtanje papirja, dokumentacije, katalogov, koledarjev in drugih tiskarskih materialov. Kjdpfxoy Nm A Rs Ah Uslt Stroj se uporablja v: • tiskarnah, • knjigoveznicah, • grafičnih delavnicah, • proizvodnji registratorjev in katalogov, • pripravi tehnične dokumentacije. Trdna nemška konstrukcija zagotavlja visoko natančnost delovanja in dolgo življenjsko dobo. Tehnični podatki: • Proizvajalec: Constantin Hang Maschinenfabrik • Model: 114-4 • Število glav: 4 • Nastavljiv razmak glav • Nastavljiva delovna miza • Noga za upravljanje – pedal • Zaščitni pokrov • Proizvedeno v Nemčiji

Stanje: novo, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Flange taper Reishauer 0 Grinding wheel dimensions 300x145x160 mm Klsdpsuayy Hjfx Ah Uot Carrier flange (machine type Reishauer RZ 400/800/1000) + including grinding wheel T1SP 300x145x160 M 1.5 EW20° 3GG by 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to Reishauer machine type Profiling according to specified module m, tooth system gg, pressure angle EW Advantages: - Grinding burn risk reduced to nearly zero - Up to 50% shorter grinding times - Dressing effort reduced by 2x - Double the grinding wheel tool life - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools

Stanje: novo, Leto izdelave: 2023, Grinding wheel dimensions 300x145x160 mm Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M4.5 EW17.5° 4GG by 3M – Profiling according to required module (m), pitch (gg), pressure angle (EW) Advantages: – Risk of grinding burn virtually eliminated Ksdoul Eraspfx Ah Ujlt – Up to 50% shorter grinding times – Dressing effort reduced by half – Double the service life of grinding wheels – Continuous, consistent grinding performance – Significantly higher grinding parameters compared to standard tools !! AS NEW CONDITION !!

Stanje: novo, Leto izdelave: 2023, Grinding wheel dimensions 300x145x160 mm Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to machine type: Reishauer T1SP 300x145x160 M4.5 EW17.5° 5GG by 3M - Profiling according to specified module (m), tooth compatibility (gg), pressure angle (EW) Advantages: - Grinding burn risk virtually eliminated Kljdpfxoul Eple Ah Ujt - Up to 50% reduced grinding times - Dressing requirement reduced by half - Double the service life of grinding wheels - Consistently stable grinding performance - Significantly higher grinding parameters compared to standard tools !! AS NEW CONDITION !!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Kljdpfofdkb Tox Ah Uet Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm Kljdpfx Aod Tqaleh Uot - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) Kodpfxjfdkb Ue Ah Ujlt - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Ksdjguk A Hepfx Ah Uslt Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) Kledpfx Aefdkbhsh Ust - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Kedsguk Dkepfx Ah Uolt Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: rabljeno, Leto izdelave: 2016, Proizvajalec: Kutter- und Gerätebau Wetter Model: AW D114 Klodpfeyvv Ddsx Ah Uot Leto: 2016 Tip: avtomatski mlin/mleček Moč: 9 kW Kapaciteta rezervoarja: 110 litrov Premer perforiranega diska: 114 mm Hitrost vrtenja – procesni polž: 160/320 o/min Hitrost vrtenja – podajalni polž: 20–40 o/min Širina: 820 mm Globina: 1260 mm Višina: 1290 mm Teža: 570 kg Popolna tehnična dokumentacija

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, skupna dolžina: 71.000 mm, skupna višina: 4.000 mm, razmak između stupova: 2.700 mm, višina police: 4.000 mm, število vrst polic: 7, nosilnost: 6.000 kg, višina okvirja: 4.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, Paletni regalni sistem 4 m visok, na polje 2 prečkinski ravni (svetlina 2700) Obseg: 32 okvirjev 4 m visokih 128 talnih sider 18 zaščitnih kotov proti naletom 100 prečk dolžine 2,7 m, višina 0,11 m 150 mrežastih polic 89/110, nosilnost 1000 kg 7 tablic z nosilnostjo Dobava na gradbišče brezplačno Klodpsyyny Ejfx Ah Uet Okviri privijačeni, ne predmontirani Prevoz / Dobava: - največ 20 delovnih dni po prejemu plačila - dobava brezplačno na gradbišče / mesto montaže - raztovarjanje s tovornjaka opravi kupec z lastno dvižno napravo - Dobave se izvajajo po celotnem območju Zvezne republike Nemčije, razen otokov! Dobave v države EU po individualnem dogovoru.

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1090, TB6/SB MOD 140, proizvajalca Giani F.lli L. & G. s.n.c. (Italija), je industrijski stroj za vzdolžno rezanje, zasnovan za razrez filmov, papirja in embalažnih materialov. Stroj odlikuje robustna konstrukcija in zanesljivo rezanje, zato je primeren za neprekinjeno industrijsko uporabo. Običajno se uporablja v predelovalni, embalažni in filmski industriji, kjer so zahtevani natančni rezi in stabilno ravnanje z materiali. ⚙️ TEHNIČNI PARAMETRI • Proizvajalec: Giani F.lli L. & G. s.n.c. (Italija) • Tip stroja: vzdolžni rezalnik / stroj za vzdolžno rezanje Kodpoyghn Iofx Ah Uelt • Model: TB6/SB MOD 140 • Serijska številka: 1090 • Leto izdelave: 2007 • Certifikat: skladno s CE • Uporaba: filmi, papir in embalažni materiali

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: 409/1335, K+G Wetter D114 Meat Grinder – Powerful, Reliable, Ready for Immediate Use For sale is a professional industrial meat grinder, K+G Wetter D114, ideally suited for butcher shops, meat processing, the food service industry, and production facilities. Condition: Used, very well maintained. Regularly serviced, technically flawless, and immediately operational. Features: - Processing of fresh and chilled meat - Use of various hole plates (different grinding grades) - Reverse function to prevent blockages - Continuous product feed - Consistent and high-quality chopping results without overheating Kodpfx Ahsy Em T Ue Uolt - Suitable for integration into production lines - High processing speed Properties & Advantages: - Powerful industrial motor - High capacity for large quantities - Stainless steel housing – hygienic and easy to clean - Simple and intuitive operation - Reliable for continuous duty - Quick disassembly for cleaning and maintenance This machine is an ideal solution for professional users who value quality, efficiency, and reliability.

Stanje: generalkompletno obnovljen (rabljeno), K+G Wetter Angle Grinder 114 Motor power: 12 kW, 28 A Stainless steel with feed auger, 2 speeds Weight: 615 kg Machine dimensions: 70 x 100 x 128 cm Inspection is of course possible by appointment. Klodpenp Hqdjfx Ah Uot Subject to errors and prior sale. All information is non-binding. No guarantee is given for the accuracy or completeness of the information and prices contained herein. Warranty and/or liability are excluded. The machine remains our property until full payment has been received.

Stanje: rabljeno, prevoženi kilometri: 60.774 km, moč: 90 kW (122,37 KM), prva registracija: 03/2014, vrsta goriva: dizel, lastna masa: 3.060 kg, največja dovoljena obremenitev: 2.940 kg, skupna masa: 6.000 kg, konfiguracija osi: 4x4, medosna razdalja: 2.700 mm, zavore: drugo, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: jeklo, število sedežev: 2, prostornina tovornega prostora: 4 m³, obratovalne ure: 5.215 h, Oprema: filter saj, kabina, klimatska naprava, parkirni grelec, parkirni senzorji, pogon na vsa štiri kolesa, računalnik na krovu, servovolan, sistem za imobilizacijo, spojka prikolice, zapora diferenciala, * German vehicle * From first owner * Original 60,774 km * Only 5,215 operating hours * Condition: see photos * 4x4 all-wheel drive with hydrostatic transmission * Zöller refuse collection system MICRO, type HG 4 HK * HL 660 rear loader with comb lift for waste containers 80-770 l * Container volume: 4 m³ * Loading doors on both sides * Operation possible from right or left * Easy unloading by rear tipping * Front lift with municipal hydraulics * Trailer hitch * Towing capacity: 3,500 kg * Air conditioning * Auxiliary heater * 2 seats * Rear view camera * Comfort driver's suspension seat * Radio Ksdpfx Ahoytxa Ie Ujlt * Leaf suspension * Beacon lights * Work lights * Storage box * Raised exhaust * Wheelbase: 2,700 mm * Gross vehicle weight: 6,000 kg * Unladen weight: 3,060 kg * Payload: 2,940 kg If a new TÜV inspection is desired, we are happy to provide a quote through our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV certificate, a new SP inspection, or a new UVV certificate. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the equipment to ensure buyers have no misconceptions regarding condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We do not accept liability for errors or incorrect information in the offer. The buyer is obliged to independently inspect the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: dober (rabljeno), For sale: individual original deep hole drilling bits from Botek (Germany) – a renowned manufacturer of precision metalworking tools. Single-lip drills with internal coolant supply, made from ultra-hard and wear-resistant K15B carbide. • Diameters from 3.0 mm to 10.2 mm Kjdswg R I Eopfx Ah Uolt • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B micrograin carbide • Suitable for steel, stainless steel, aluminium, bronze, and engineering plastics These drills are designed for precision deep hole drilling with high dimensional stability. Applications include aerospace, automotive, hydraulics, and toolmaking industries. Condition: New and used (previously run), but in good technical condition. Some may require resharpening – an ideal base for professionals. //// PRICE IS PER PIECE /////

Stanje: rabljeno, prevoženi kilometri: 223.000 km, prva registracija: 01/2019, vrsta goriva: dizel, skupna masa: 31.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 01/2027, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, * MAN TGS 31.420 8x2 smetarsko vozilo * Euro6C * Avtomatski menjalnik * Zöller Medium ASF X2 29 * Zöller Delta Lifter 2301 * Prostornina 28,7 m³ * Kamera za vzvratno vožnjo * Sistem za pomoč pri zavijanju * Tempomat Kjdpfxeyz H Rfe Ah Uslt * Dvižna/vodljiva os * 3-sedežna kabina * Klimatska naprava * Električna stekla

Stanje: rabljeno, Leto izdelave: 1978, številka stroja/vozila: 150 359 - 11683, Funkcionalnost: popolnoma funkcionalen, For sale: PS160 (2 units) and PS140 (1 unit). One offers 250 MP, the other 140 t. Kljdpfjt Ucpbjx Ah Uot The PS160 is one of the complete machines and is operational; the other PS160 does not include the control cabinet. Cgebttvst Ucpbod E Set The machines are available for sale individually or as a set. Please inquire by phone or email!

Stanje: rabljeno, prevoženi kilometri: 223.000 km, prva registracija: 01/2019, vrsta goriva: dizel, skupna masa: 31.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 01/2027, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: klimatska naprava, * MAN TGS 31.420 8x2 smetarsko vozilo * Euro6C Klodpjyx R Ebofx Ah Uet * Avtomatski menjalnik * Zöller Medium ASF X2 29 * Zöller Delta Lifter 2301 * Prostornina 28,7 m³ * Kamera za vzvratno vožnjo * Sistem za pomoč pri zavijanju * Tempomat * 3-sedežna kabina * Klimatska naprava * Električni pomik stekel

Stanje: zelo dobro (rabljeno), Na prodajo profesionalna razvrtalna glava KOMET KFK 1 M02 02360 z mikrometrično nastavitvijo – vrhunsko orodje za natančno obdelavo izvrtin v industrijski proizvodnji in orodjarstvu. Zelo dobro ohranjena – orodje je popolnoma funkcionalno in pripravljeno za uporabo. Precizna mikrometrična lestvica omogoča nastavitev z natančnostjo do 0,01 mm, kar zagotavlja najvišjo kakovost površine. Kedexk T H Nopfx Ah Uolt • Proizvajalec: KOMET • Model: KFK 1 – M02 02360 • Vpenjanje: SK40 / DIN 69871 • Lestvica: mikrometrična 0,01 mm • Področje uporabe: precizno razvrtavanje in dodelava izvrtin • Stanje: rabljeno – zelo dobro tehnično in vizualno stanje

Stanje: zelo dobro (rabljeno), • Proizvajalec: ABUS KG – Nemčija • Tip: K-300 1-4 • Moč motorja: 3,8 kW • Napajanje: 400 V / 50 Hz • Opremljen z elektromagnetno zavoro – zavorni moment 90 Nm • Zobati gred – premer cca 34 mm • Pritrditev: kvadratni prirobnik • Robustna industrijska zasnova, namenjena delu v ABUS mostnih žerjavih in vitlih • Stanje: rabljen, delujoč (prave slike) Klsdpfsxbfutsx Ah Ujt

Stanje: rabljeno, Leto izdelave: 1986, Workpiece diameter 460 mm Thread length 900 mm Thread pitch 100 mm Total power requirement 10 kW Machine weight approx. 8 t Space requirement approx. m R E I S H A U E R (Switzerland) Universal - extra large - thread and worm grinding machine Model ULG 46 Year 1986 _____ ___ Grinding length: 900 mm Maximum workpiece clamping length: 1,190 / 1,400 mm Workpiece Ø / thread Ø, min./max.: 10 – 460 mm (!) Longitudinal adjustment of workhead on table: 210 mm Maximum workpiece weight approx.: 100 kg Work spindle bore approx.: 65 mm Lead range for single-rib wheels: 0.3 – 100 mm Maximum module: 10 Maximum lead angle: +/- 40° Grinding wheel dimensions, Ø x width: 350 x 20/40 mm Relief grinding size: 0.03 – 8 mm Presettable number of flutes: 2 – 10, 12, 14, and 16 27 workpiece speeds: 0.4 – 160 rpm Infinitely variable grinding wheel speeds: 72 – 2,500 rpm Spindle drive approx. 10 kW * Total connected load approx. 25 kW - 400 V - 50 Hz Weight approx. 8,000 kg Accessories / Special Features: Kljdpet H Smtefx Ah Ust • Machine was originally built with an increased center height for a maximum workpiece swing of 460 mm, allowing thread machining on larger workpieces and housings (aircraft industry)! • Internal thread grinding device with two dressing devices (long and short spindles) • Various flanges with grinding wheels • USL 3200 dressing device for pressure roll profiling, mounted above the grinding wheel (not motorized) • USL 700 dressing device for manual profiling of single-ribbed grinding wheel flanks • Automatic plunge-cut device. Automatic lift-off of grinding slide for the return of the workpiece slide • Relief grinding device with several cams, also suitable for plunge grinding • Hydraulic tailstock with foot switch and expansion compensation • Two simple dressing devices, manually operated for straight profiling • Two 3-point steadies for heavy workpiece support • Various flanges, set of change gears, numerous coolant nozzles, setting gauge, 3 faceplates up to 500 mm diameter, separate electrical cabinet for adjusting various grinding cycles • Lift-off safety hood above the working area, monitored by limit switches, etc. No coolant device available, but connection to a central coolant supply with valve control as well as a separate coolant chiller and standalone dust extraction unit.

Stanje: rabljeno, Grinding wheel width max. 104 mm Grinding wheel diameter/bore 160 mm Kedpfxeu Sbdye Ah Uelt Flange taper Suitable for NZA, AZA, RZ301E, etc.

Stanje: dober (rabljeno), 4 x Bonfiglioli Wind turbine gearbox JB00001227 SN B6201603697 Kledpfswg E Utex Ah Uot