Kydra Kpc 5.5 Tp nakup rabljenega (3.847)

Stanje: dober (rabljeno), Bočni kanalni puhalnik, kompresor bočnega kanala, obročasti puhalnik, vakuumska črpalka, puhalnik Rsdpjyh Hiwefx Agtot -Proizvajalec: Siemens, bočni kanalni puhalnik/kompresor -Tip: Elmo-G 2BH1 807-1AC17 -Pogon: 5,50 kW -Hitrost vrtenja: 2920 obr/min -Dimenzije: 680/500/V520 mm -Teža: 122 kg

Stanje: dober (rabljeno), Leto izdelave: 2013, Sila zapiranja: 4500 t Premer vijaka: 250 mm Teža brizga: 61166 g Razdalja med stebri (vertikalno): 2100 mm Razdalja med stebri (vodoravno): 2430 mm Rjdow Dc Ekopfx Agtot Volumen brizga: 67216 cm³

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), A planetary saw (inline pipe saw) by IPM is available. Maximum pipe diameter: 400 mm, power: 7 kW, machine dimensions (L/W/H): approx. 4500 mm / 2000 mm / 2300 mm, weight: approx. 7000 kg. Documentation is available. An on-site inspection is possible. Rodpfxou Ei T Nj Agtst

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Immediately available: ALMiG Variable Screw Compressor COMBI XP 6 – 5.5 kW – with Aircontrol Basic Controller Model: Combi XP 6 Controller: AIR CONTROL BASIC Year of manufacture: 2025 Technical Specifications Model: Combi XP 6 Possible Operating Pressure Range (continuously adjustable): 5 – 13 bar Free Air Delivery at Minimum/Maximum Speed, Measured according to ISO 1217 Annex C At 5 bar (g): 0.19 to 0.89 m³/min At 6 bar (g): 0.19 to 0.86 m³/min Rsdpjyay Itefx Agtst At 7 bar (g): 0.19 to 0.82 m³/min At 8 bar (g): 0.18 to 0.78 m³/min At 9 bar (g): 0.18 to 0.76 m³/min At 10 bar (g): 0.18 to 0.69 m³/min At 11 bar (g): 0.18 to 0.67 m³/min At 12 bar (g): 0.17 to 0.63 m³/min At 13 bar (g): 0.17 to 0.59 m³/min Installed Motor Power: 5.5 kW Drive Motor Protection Rating / Insulation Class: IP 23 Operating Voltage / Frequency: 400 / 73-290 V/Hz Compressed Air Connection: 3/4" G Dimensions and Weight: Length (mm): 643 Width (mm): 790 Height (mm): 961 Weight (kg): 250 kg Visit our premises in Erlangen – we always have a large selection of new and used screw compressors in stock. Simple leasing available through our partner bank (also for Austria & Switzerland).

Stanje: dober (rabljeno), Features: Rsdsyl Sl Ispfx Agtjt - Conventional lathe - Digital display (230 V single-phase power supply) - Longitudinal travel: 850 mm, cross travel: 205 mm, top slide travel: 95 mm - Programming of 200 auxiliary zero points - 200-tool magazine - Taper measurement - Reinforced prismatic bed, made of grey cast iron, induction-hardened and ground - CAMLOCK D1-4'' spindle nose - Spindle hardened and ground, oil-bath lubricated, mounted on 2 high-precision tapered roller bearings - Turning accuracy < 0.015 mm at the chuck - Gearbox gears hardened and ground, oil-bath lubricated - Backlash-free slides adjustable via gibs - Rapid feed changes via mechanical gearbox - Automatic longitudinal and cross feeds - Simultaneous control of spindle and leadscrew - Tailstock lateral displacement +/- 10 mm - Max. diameter over carriage: 212 mm - Max. diameter over gap bed: 491 mm - Left / right spindle rotation reversal, controlled from the apron - Jog mode operation - Resettable graduated vernier scales on all axes

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), Max. glass thickness: 50 mm, drilling diameter: 4–200 mm, connected load: 1.5 kW, weight: 270 kg, the machine was not used. Rjdpfjnp I N Ajx Agtst

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 750 mm, skupna dolžina: 1.300 mm, razmak osovin: 1.300 mm, Nadpasovni magnet. Samočistilen. Primeren za transportne trakove s širino dela 1000 mm. Z ogrodjem. Rodox Npqdepfx Agtst

Stanje: dober (rabljeno), Leto izdelave: 1995, obratovalne ure: 43.499 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 1.000 mm, 5-Axis Gantry Milling Machine WALDRICH Product manufactured on the machine: AIRBUS LANDING GEAR (aerospace) Year of manufacture: 1995; Year of delivery: 1998 Installation & commissioning: 1999 Operating period: 03/1999 to 07/2022 (21 years) Condition: Very Good Customer specifications / History Previous owner (1999–2022): German aerospace group Technical data Travel & Working Area X-axis (table longitudinal travel): 4,000 mm Y-axis (cross slide traverse): 2,500 mm Z-axis (ram vertical travel): 1,000 mm Distance between columns: 2,000 mm C-axis: 360,000 positions (increment 0.001°) B-axis: 360,000 positions Tables & Pallets Number of tables: 2 Table dimensions: 1,500 x 3,000 mm Table height above floor: 740 mm Max. table load: 12,000 kg Feed & Rapid Traverse X/Y/Z: Feed 0–6,000 mm/min, Rapid 15,000 mm/min B-axis Rotary: 0–3,600 deg/min C-axis Rotary: 0–3,600 deg/min Feed Forces / Torque X/Y/Z max.: 30 kN each C-axis detachable torque: max. 20,000 Nm C-axis bearing regulation: max. 4,000 Nm Speed Range Rodpfxex Hxdzj Agtjt Level I: 20–875 rpm Level II: 876–4,000 rpm Spindle Drive Power: 50 kW Speed range: 20–4,000 rpm Tool Change System Type: Chain magazine Capacity: 120 tools Tool holder: ISO 50 Max. tool Ø: 315 mm Tool Ø at full capacity: 100 mm Max. tool length: 550 mm Max. tool weight per gripper: 35 kg Spindle Units / Clearances Vertical spindle unit: spindle nose – table surface 250–1,250 mm Horizontal spindle unit: spindle centre – table surface 150–1,150 mm Rotary Nutator (MC303): spindle centre – table surface 45–1,045 mm Coolant & Lubrication Coolant supply: internal and external available Lubrication: automatic (spindle bearings and gearbox) Dimensions & Weight Machine dimensions (approx.): Length: 14,700 mm Width: 10,000 mm Height above floor: 6,079 mm Total machine weight (approx.): 72,500 kg Machine bed: 8,500 kg Machine table & pallet: 16,000 kg 2 columns: 10,200 kg Crossbeam with platform: 20,000 kg Features & Accessories Fully automatic tool changer (ATC): 120 positions (ISO 50) Fully automatic head changer incl. universal milling heads Milling head: C-axis: 360,000 x 0.001° B-axis: 360,000° Accessories: 3 chip conveyors Tool cabinet + pallets with loose accessories Packing List (Transport Dimensions) Axes: 8,950 x 1,700 x H 1,000 mm 2 tables: 3,300 x 1,700 x H 340 mm Tool changer with slide: 3,500 x 2,300 x H 2,670 mm Tool changer without slide: 4,450 x 1,060 x H 1,870 mm Pick-up heads: 3,000 x 470 x H 2,200 mm Crossbeam: 7,000 x 2,000 x H 2,500 mm 2 support columns: 2,900 x 1,000 x H 1,500 mm Slide with ram: 3,450 x 1,800 x H 2,100 mm Chain section: 3,700 x 2,000 x H 1,100 mm Electrical cabinet No. 1: 5,400 x 600 x H 2,000 mm Electrical cabinet No. 2: 2,100 x 650 x H 2,000 mm Chip conveyor: 5,000 x 500 x H 2,300 mm Head: 900 x 600 x H 700 mm Tool cabinet: 2,100 x 1,200 x H 600 mm 7 pallets with loose accessories This WALDRICH SIEGEN 5-axis gantry milling machine is ideally suited for the machining of steel, cast iron, and non-ferrous metals. The combination of a 50 kW spindle drive, automatic tool changer (120 positions), fully automatic head changer, and high-precision B-/C-axis positioning (0.001°) makes it the ideal solution for demanding and complex manufacturing tasks.

Stanje: rabljeno, Leto izdelave: 2014, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 640 mm, pomik po osi Z: 640 mm, hitro pomikanje X-os: 32 m/min, hitri pomik os Y: 32 m/min, hitri pomik na osi Z: 25 m/min, proizvajalec krmilnikov: FANUC, model krmilnika: 0-iMD, teža obdelovanca (maks.): 2.300 kg, širina mize: 1.500 mm, dolžina mize: 600 mm, moč vretenovega motorja: 27 W, VERTIKALNI OBDELOVALNI CENTER "AKIRA SEIKI" MOD. V 5.5 XP Vključno s standardno opremo in: - Odvajač ostružkov - Daljinsko ročno kolo Redpfx Agox U S N Tstst - Prednastavitev orodja - Naključni (Random) magazin za 28 orodij

Leto izdelave: 2001, stanje: rabljeno, Pressing force: 148 t Material: Carbide rods Process: Extrusion pressing process T O K A I (Japan) Hydraulic extrusion press for carbide rods Model: TP 150 Year of manufacture: 2001 _____ Extrusion cylinder pressing force: 10 – 148 t Cylinder inner dimensions: 300 x 900 mm Cylinder stroke: 900 mm Stroke speed forward/backward/extrusion: 10/11/8 mm/sec Material cylinder tilt angle up to: 60° (90°) Redjt Hw Snopfx Agtjt Workpiece tray size: 143 x 800 mm Total worktable size: 800 x 1,800 mm Adjustable workpiece support: 50 x 100 mm Hydraulic oil capacity: approx. 400 liters Material cylinder heating: 7.5 kW Hydraulic pump: 11 kW Total drive: approx. 20 kW – 380 V – 50 Hz Weight: approx. 6.0 t / Machine height: approx. 3.30 m Accessories / Special features: • Designed for the production of round or profiled carbide rods via extrusion pressing of heated, vacuum-processed carbide powder. • The complete extrusion unit with the working cylinder is swiveling, allowing the extruded workpieces (carbide profile rods) to be placed easily onto storage trays situated on a transport device, which can be adjusted longitudinally and transversely by stepper motor and is also partially height-adjustable. • The entire operation can be pre-set and monitored using a conventional MITSUBISHI controller Type A 1SJHCPU. Mobile switch cabinet with indicator devices for heating temperature, angle setting, vacuum, pressure stages. • Four heating circuits: 1x for nozzle, 3x for material cylinder • Material cutting device • Vacuum pump for creating a vacuum in the material area to avoid cracks and air bubbles. Additional various accessories included. Condition: Good to very good – possibly ready for demonstration under power. Rare machine! Delivery: Ex stock – as inspected. Payment: Net, due upon receipt of invoice.

Stanje: zelo dobro (rabljeno), Valentini Macchine TP/3 Overarm Spindle Moulder Spindle to arm distance: 800 mm Spindle drive motor: two-speed, 3.3 / 2.6 kW Two spindle speeds: 9,000 / 18,000 RPM Spindle tilt adjustment: 45-90-45 degrees Rsdpfjwy Np Iox Agtst Vertical spindle stroke: 80 mm Table height adjustable Pneumatic spindle control via foot pedal

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, CECCATO CSM 5.5 X mini Screw Compressor Power: 4 kW Redpfx Agjvurttetst Operating pressure: 10 bar Capacity: approx. 470 l/min Noise level: 62 dB Dedicated dryer Air receiver: 270 l

Leto izdelave: 2017, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 170221461, Specification: Volt/Hz: 415/50 Rated Power: 3A The fully automatic strapping machine TITANAS TP-702NS is an efficient and reliable solution for the secure packaging of goods. It operates fully automatically and ensures fast and consistent strapping of pallets, cartons, or other packaging units, significantly speeding up the packaging process. The user-friendly design allows for easy operation and adaptation to various packaging requirements. Rodpfewrdpyox Agtet

Leto izdelave: 2021, stanje: novo, številka stroja/vozila: MA0134_MAXXI5,5, Exhibition machine: New piston compressor immediately available (Plug and Play): AIRKO MAXXI 5.5 D – 270 – 10 bar with horizontal 270-liter air receiver Year of manufacture: 2021 The compressor has run for only 1 operating hour and is immediately available. 2 cylinders Pressure: 10 bar Rated power: 5.5 kW Air delivery at 7 bar: 605 l/min Sound level: 80 dB(A) Compressed air outlet: 1/2" Dimensions (L x W x H): 170 x 56 x 134 cm Weight: 181 kg Convenient leasing available through our partner bank. Rjdpohu R Akofx Agtst Visit our showroom. We always have a wide selection of new and used compressors in stock! Immediate availability.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, FOR EXPORT ONLY (Tank without AD 2000 certification!): New ALMIG COMBI 6/270 D screw compressor with integrated refrigeration dryer (with timed drain) with 270-liter receiver (with CE certification) with Aircontrol Basic controller Rsdpfx Ageumwv Tetjt Year of manufacture: 2023 Operating hours: 0 h Shipping available at extra cost! Technical Data Type: COMBI 6/270D Operating overpressure: 8 bar (g) FAD according to ISO 1217 Annex C: 0.82 m³/min Degree of protection / insulation class drive motor: IP 55 / F Rated power drive motor: 5.5 kW Operating voltage / frequency: 400/50 V/Hz Sound pressure level (DIN 45635 T.13): 63 dB(A) Length: 1180 mm Width: 770 mm Height: 1680 mm Weight: 455 kg Compressed air connection: G 3/4" Visit our showroom. We always have a large selection of new and used compressors in stock! Immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 31927596, Razstavni eksponat (takoj na voljo): RENNER Riko 960/B-S batni kompresor s trikotno-zvezdnim zagonom z zvočno izoliranim pokrovom Rjdpexzgilsfx Agtjt Tehnični podatki: Moč motorja: 5,5 kW Nazivna napetost: 400 V Maksimalni tlak: 10 bar Zmogljivost pri 7 bar: 740 l/min Valji / stopnje: 2/2 Raven hrupa: 69 dB(A) Dimenzije D x Š x V: 985 x 722 x 802 mm Teža: 206 kg Pošiljanje možno proti doplačilu. Možnost leasing ponudbe naše interne banke za podjetja. Prevzem po izteku pogodbe je možen z izplačilom preostale vrednosti. Boniteta je pogoj. Vedno imamo veliko izbiro novih in rabljenih kompresorjev na zalogi! Takoj dobavljivo.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, TAKOJ NA VOLJO: Nov Kaeser SX 8 vijačni kompresor Special Edition 8 bar vklj. s krmilnikom SIGMA CONTROL 2 Leto izdelave: 2025 Redpfx Agjwztt Hstst Tehnični podatki: Volumenski pretok pri 8 bar: 0,80 m³/min Nazivna moč pogonskega motorja: 5,5 kW Električno napajanje: 400 V / 3 faze / 50 Hz Dimenzije (Š x G x V) v mm: 590 x 632 x 970 Teža: 155 kg Priključek za stisnjen zrak: G 3/4" Raven zvočnega tlaka: 64 dB(A) Kompresor je nov, neuporabljen z navodili za uporabo. Obiščite našo prodajalno. Vedno imamo veliko izbiro novih in rabljenih kompresorjev na zalogi!

Leto izdelave: 2022, obratovalne ure: 11 h, stanje: kot nova (razstavni stroj), Exhibition piece: Screw Compressor ALMIG BELT XP 6 - 10 bar (air-cooled) Year of manufacture: 2022 / AVAILABLE IMMEDIATELY! Controller: ACB Operating hours: 11 h Technical Specifications Rodpfog Tdv Aox Agtjt Model: BELT XP 6 Operating overpressure: 10 bar(g) Free air delivery according to ISO 1217 Annex C: 0.68 m³/min Protection rating / insulation class of drive motor: IP 55 / ISO F Rated power of drive motor: 5.5 kW Operating voltage / frequency: 400/50 V/Hz Sound pressure level (DIN 45635 Part 13): 67 dB(A) Length: 750 mm Width: 600 mm Height: 955 mm Weight: 217 kg Compressed air connection: G 1/2" Attractive leasing options on new machines available through our in-house bank. Visit our showroom. We always have a wide selection of new and used compressors in stock!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 31524565, skupna masa: 286 kg, Exhibition piece (immediately available): RENNER Riko 960/270 ST-KT Piston Compressor with galvanized 270-liter vertical air receiver equipped with refrigerated dryer and time-controlled condensate drain with star-delta starting Rjdewhxluspfx Agtst with metal buffer set for compressed air tank Technical Data: Motor power: 5.5 kW Rated voltage: 400 V Max. pressure: 10 bar FAD at 7 bar: 740 l/min Cylinders / stages: 2/2 Sound level: 79 dB(A) Tank volume: 270 liters Dimensions (L x W x H): 970 x 795 x 1880 mm Weight: 264 kg Shipping available at extra cost. Leasing offer from our partner bank available for commercial customers. Takeover at end of lease term possible by payment of a final installment, subject to credit approval. We always have a wide selection of new and used compressors in stock! Immediately available.

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Product Description FINN POWER TP 250 CNC Travel distances: X: 1020 mm Y: 1020 mm Control system: Sinumerik 3N Redowxw Uispfx Agtot Punching force: 250 kN Max. punching diameter: 85 mm Max. sheet thickness: 8 mm Machine dimensions: 3500 x 2300 x 2300 mm Machine weight: 5800 kg

Stanje: zelo dobro (rabljeno), For sale: well-maintained Helmerding eccentric press. Very little used! Rsdpfx Agjfdnw Hetot

Stanje: rabljeno, največja dovoljena obremenitev: 15.900 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2000, Oprema: ABS, Proizvajalec: HMK Bilcon Model: TP-200 ADR cisterna, 2 osi, 22.000 l, 4 predelki Leto: 2000 Rsdpfx Agsynq D Iotot Stanje: Dobro Serijska številka: 10682 Ref. št.: 8065 Datum registracije: 11-05-2000 Kolutne zavore: ? ABS: ? Zadnji osi: BPW Velikost pnevmatik: 425/65R22,5 Preostanek profila: 70 % Vzmetenje: Zračno Orodjarna: ? Skupna masa: 20.000 kg Lastna masa: 4.100 kg Nosilnost: 15.900 kg

Stanje: zelo dobro (rabljeno), Area of application: • Extraction for individual and multiple workstations in industry and trade • Free-flowing and dry dusts, hazardous dusts, dry chips Special features: • Filter cleaning method: – Manual brush cleaning – Cleanable continuous filter cartridge (Dust class M) • Special versions available with various filter cartridges, exhaust air connectors, special voltages, special paint finish, pre-separators, and external control via volt-free contact possible Your benefits at a glance: Rjdpfx Agow Avl Uetot • High suction power due to side channel blower technology • Low operating costs • Low noise operation, suitable for multi-shift use • Patented tiltable filter housing for easy disposal of collected material | Price incl. packaging (wooden crate) | plus shipping costs

Stanje: dober (rabljeno), GRUNDFOS PUMPE Model: TP-32-120/2 Bar/C: 10/90 Kapacitet (Q): 9,0 m³/t Rjdpfx Aoppxy Esgtot Løftehøjde (H): 7,1 m Omdrejningstal: 2890 min⁻¹ Frekvens: 50 Hz Yderligere oplysninger kan findes på de vedhæftede fotos.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Povezovalni stroj Transpak TP 702, trak 12 mm, lok 850 x 600, kapaciteta 50 do 55 ciklov na minuto, samodejno vnašanje in izmet traku, nastavljiva napetost traku preko potenciometra. Na voljo tudi: povezovalni stroj Transpak TP 702, lok 550 x 400, trak 5 mm in naslednji model TP 702, lok 650 x 500, iz nerjavečega jekla, trak 8 mm. Rjdpfsytr Ncox Agtjt