Variabilni vijačni kompresor 5,5 kW

ALMIG Combi XP 6

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Ex-demonstration unit, immediately available: Almig variable-speed screw compressor COMBI XP 6-270D – 5.5 kW – with integrated refrigerated dryer with timer-controlled condensate drain with 270-litre air receiver equipped with Aircontrol Basic controller Model: Combi XP 6-270 D Controller: AIR CONTROL BASE Year of manufacture: 2025 Technical Specifications Model: Combi XP 6-270D Adjustable operating pressure range: 5 – 13 bar (infinitely variable) Free air delivery at minimum / maximum speed, measured to ISO 1217 Annex C at 5 bar (g): 0.19 to 0.89 m³/min at 6 bar (g): 0.19 to 0.86 m³/min at 7 bar (g): 0.19 to 0.82 m³/min at 8 bar (g): 0.18 to 0.78 m³/min at 9 bar (g): 0.18 to 0.76 m³/min at 10 bar (g): 0.18 to 0.69 m³/min at 11 bar (g): 0.18 to 0.67 m³/min at 12 bar (g): 0.17 to 0.63 m³/min at 13 bar (g): 0.17 to 0.59 m³/min Installed motor power: 5.5 kW Drive motor protection rating / insulation class: IP 23 Operating voltage / frequency: 400 V / 73–290 Hz Compressed air connection: 3/4" G Dimensions and weight: Length (mm): 1,530 Width (mm): 640 Height (mm): 1,520 Weight (kg): 250 kg Bodpox Uqxgefx Abxslp Visit our premises in Erlangen - we always have a large selection of new and used screw compressors in stock.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Avtomatski stružni stroji Locatelli Miniariete 35 Bsdpfx Abox Ar Ivsxjlp Maksimalna dolžina materiala: 1000 mm Maksimalna dolžina obdelovanega materiala: 100 mm Avtomatski podajalnik materiala CE certifikat Popolna tehnična dokumentacija DTR Glavni motor z močjo 3/4 kW

Stanje: potreben popravila (rabljeno), Machine for turning smaller wooden pieces; the machine works with diameters from 7 to 45 mm. Bljdpfx Ajuknznebxsp

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, laserska moč: 30 W, dolžina gredi: 10.700 mm, Laser engraving machine with 30-watt laser power - Laser source: 30-watt CO2 metal tube Demonstration unit with minimal operating hours - incl. Windows 10 Pro 64-bit PC system Blsdpfjirmgmex Abxjp - incl. 22" monitor - all software pre-installed and calibrated - Engraving software in German - Very easy to operate - Switch on and start engraving right away - CO2 laser source with 30 watts for high-contrast and fast markings with extremely high resolution - Deep engraving capability - Wobble function - Suitable for engraving e.g. on wood, plastic, anodized surfaces, etc. - Heavy-duty industrial quality - Complete system / immediately ready for operation - Working area approx. 500 x 600 x 600 mm (L x W x H) - Mounting surface with threaded holes in 50 mm grid - LED workspace lighting - 50 mm duct connection for smoke extraction - Engraving area approx. 180 x 180 mm - Expandable up to approx. 300 x 300 mm - incl. foot switch to start engraving Please also note our attractive leasing/financing offers. Sale exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 1.520 h, skupna masa: 235 kg, skupna višina: 1.055 mm, število osi: 3, This 3-axis Trotec Speedy 360 was manufactured in 2019 and features a robust CO₂ laser system with a power range of 40-120 W. It offers a maximum working area of 32 × 20 inches and supports a wide variety of materials with its multifunctional table options, including a vacuum table and a honeycomb cutting panel. This machine is ideal for precise cutting and engraving and includes JobControl® Expert software for enhanced operation. If you are looking for high-quality cutting capabilities, you should consider the Trotec Speedy 360 machine we have for sale. Contact us for further details about this machine. Additional Equipment • Autofocus: Light beam focus (electro-optical) • Positioning: Laser pointer (655 nm) Machine Advantages Technical Machine Benefits • Ergonomic access to the work area • Coaxial air assist • Optional equipment: protective gear, air assist, rotary device, JobControl® Vision, vacuum table, honeycomb cutting panel, special cutting tables • Extraction: surface extraction through the back of the engraving cabinet, table extraction with vacuum and cutting table • Laser safety: classification: CDRH laser safety, CE certified, laser class 2 • Laser safety features: dual interlock system, lid with side loading • Temperature: +15°C to +25°C • Humidity: 40% to max. 70% (non-condensing) • Dust-free environment: grade 2 according to IEC 60947-1 Bedpsx U Th Rjfx Abxolp Additional Information Motion Working area: 813 × 508 mm Loading surface: 890 × 600 mm Max. workpiece height: With worktable: 210 mm Without worktable: 280 mm Motion system speed: 355 cm/sec Acceleration: 5g Workpiece Max. material load: Static: Up to 100 kg Dynamic: Up to 30 kg Table Worktables: Standard: Ferromagnetic engraving table Optional: Multifunctional table system and honeycomb cutting table Tools: Lenses: Standard: 2.0" Optional: 1.5", 2.0" light disc, 2.5", 4.0" Dimensions Machine depth 1221 mm

Stanje: dober (rabljeno), Leto izdelave: 2010, Kaeser SX3T kompresor Serijska številka: 2266 Leto: 2010, 2,2 kW, 11,0 bar, 3-fazni Bjdeuqckdspfx Abxolp

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 19.178 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: APF220681, moč: 160 kW (217,54 KM), obratovalni tlak: 10 letvica, tlak (min.): 8,5 letvica, vrsta hlajenja: zrak, Oprema: Na voljo je tipska ploščica, kompresor, sistem stisnjenega zraka, Kompresor z vijačnim rotorjem brez olja (oil-free) Atlas Copco ZR 160 VSD, z regulacijo hitrosti. Kompresor Atlas Copco ZR 160 VSD je idealna rešitev za uporabnike, ki potrebujejo zanesljivo in učinkovito delovanje v industrijskem okolju. Ta model, čeprav je že uporabljen, ohranja svojo učinkovitost in ugled glede vzdržljivosti. Zmožen je delovati pri maksimalnem tlaku 8,5 bar, zaradi česar je primeren za različne vrste aplikacij, ki zahtevajo stalno in stabilno stiskanje zraka. Opremljen z edinstveno tehnologijo VSD (variabilni pogon), ta kompresor prilagaja svojo hitrost za optimizacijo porabe energije, kar lahko znatno zmanjša operativne stroške. To je še posebej pomembna lastnost v obratih, kjer se potrebe po stisnjenem zraku pogosto spreminjajo. Bedeyx Ez Djpfx Abxslp Izdelan podjetja ATLAS COPCO, vodilnega na področju rešitev za stisnjen zrak, je ZR160 VSD sinonim za napredno tehnologijo in robustno zasnovo. Kljub temu, da je rabljen, ta model zagotavlja visoko zanesljivost in je sposoben izpolnjevati najstrožje zahteve industrije, hkrati pa zagotavlja odlično energetsko učinkovitost.

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), new 4 kW screw compressor FirstAir Model: FAS4 Year of manufacture: 2022 Operating hours: 0 h Operating overpressure: 10 bar(g) Free air delivery at 10 bar(g): 470 l/min Installed motor power: 4 kW Degree of protection / insulation class drive motor: IP 55 F Operating voltage: 400V ~ 50 Hz Sound pressure level (EN ISO 2151): 68 dB(A) Compressed air connection: G 1/2" Length: 660 mm Width: 600 mm Height: 890 mm Weight: 230 kg Bedpfx Absix Akzsxslp Drive: Belt drive Convenient leasing options for new machines available through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2026, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Razstavni eksponat, na voljo takoj: Almig, variabilni vijačni kompresor COMBI XP 15 – 15 kW – z nadzorno enoto Aircontrol Basic Tip: Combi XP 15 Nadzorna enota: AIR CONTROL BASIC Letnik: 2026 Bjdpfx Abjxwb Rpsxjlp Tehnični podatki Tip: Combi XP 15 Možni delovni nadtlaki naprave (brezstopenjsko nastavljivi): 5 – 13 bar Pretok pri minimalnih/maksimalnih vrtljajih, izmerjen po standardu ISO 1217, priloga C pri 5 bar (ue): 0,50 do 2,49 m³/min pri 6 bar (ue): 0,48 do 2,41 m³/min pri 7 bar (ue): 0,48 do 2,32 m³/min pri 8 bar (ue): 0,45 do 2,23 m³/min pri 9 bar (ue): 0,45 do 2,12 m³/min pri 10 bar (ue): 0,45 do 2,02 m³/min pri 11 bar (ue): 0,45 do 1,90 m³/min pri 12 bar (ue): 0,44 do 1,80 m³/min pri 13 bar (ue): 0,43 do 1,69 m³/min Nameščena moč motorja: 15 kW Stopnja zaščite / izolacijski razred pogonskega motorja: IP 23 Delovna napetost / frekvenca: 400 / 85–400 V/Hz Priključek za stisnjen zrak: 3/4" G Mere in teža: Dolžina (mm): 691 Širina (mm): 1051 Višina (mm): 1088 Teža (kg): 410 kg Obiščite naše prostore v Erlangen, vedno imamo na zalogi veliko izbiro novih in rabljenih vijačnih kompresorjev. Možen je enostaven lizing prek naše bančne institucije (tudi za Avstrijo in Švico).

Leto izdelave: 2022, obratovalne ure: 11 h, stanje: kot nova (razstavni stroj), Exhibition piece: Bjdpfx Aog Tdv Asbxjlp Screw Compressor ALMIG BELT XP 6 - 10 bar (air-cooled) Year of manufacture: 2022 / AVAILABLE IMMEDIATELY! Controller: ACB Operating hours: 11 h Technical Specifications Model: BELT XP 6 Operating overpressure: 10 bar(g) Free air delivery according to ISO 1217 Annex C: 0.68 m³/min Protection rating / insulation class of drive motor: IP 55 / ISO F Rated power of drive motor: 5.5 kW Operating voltage / frequency: 400/50 V/Hz Sound pressure level (DIN 45635 Part 13): 67 dB(A) Length: 750 mm Width: 600 mm Height: 955 mm Weight: 217 kg Compressed air connection: G 1/2" Attractive leasing options on new machines available through our in-house bank. Visit our showroom. We always have a wide selection of new and used compressors in stock!