Kraussmaffei Krauss Maffei 350-3000 Cx nakup rabljenega (11.723)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, 1 kos rabljene brizgalke za plastiko Proizvajalec: KRAUSS MAFFEI Tip: KM500-4300CX Leto izdelave: 2010 Zapiralna sila: 500 ton Razmak med stebri: 900 x 900 mm Premer polža: 90 mm Maks. volumen brizga: 2.290 cm³ Teža brizganca: 1.777 g/PS Krmiljenje: MC5 Oprema: 2 x izvlek jedra Vmesnik za robota Njdpfx Asx Tbfueh Uswg 12-conski vročekanačni regulator Vmesnik za napravo za temperiranje

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS (g/polystyrene) Clamping force: 6,500 kN Machine weight approx.: 32 t From series production Nwodpfx Ahetunccs Ujg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 100 mm, tlak vbrizgavanja: 1.742 letvica, minimalna višina orodja: 600 mm, odmični hod: 1.150 mm, širina plošče: 1.440 mm, višina plošče: 1.490 mm, Injection moulding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mould opening force: 346 kN Sliding plate opening force: 169 kN Sliding plate closing force: 144 kN Mounting platen dimensions: 1,490 mm x 1,440 mm Nodpfswp Si Nsx Ah Uewg Clear space between tie-bars: 1,000 mm x 930 mm Mould opening stroke: 1,150 mm Minimum mould height: 600 mm Injection unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Injection rate: 649 cm³/s Wittmann W643 robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm C-axis servo: +/- 90° A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Electrical and hydraulic equipment Rated pump motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight including control cabinet: 39.5 t Operating hours: 70,000 h MAINTENANCE All hydraulic hoses replaced 12/24 Last inspection by Krauss Maffei: 24/03 New (hydraulic) screw drive: 25/01 New check valve: 01/25 EQUIPMENT - Fully hydraulic clamping system - MC 4 control system with colour monitor and integrated operator panel - Built-in floppy disk drive - Complete plasticising system for thermoplastics with a 100 mm screw diameter, check valve, and open nozzle

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Fabricant : Krauss Maffei Type : KM 650-3500-700 CZ Année de fabrication : 2007 Commande : MC 4 Unité de fermeture : Force de fermeture : 650 t Course d’ouverture : 1150 mm Hauteur minimum d’installation du moule : 600 mm Distance maximale entre plateaux : 1750 mm Entraxe colonnes (h x v) : 1100 x 900 mm Dimensions des plateaux (h x v) : 1510 x 1370 mm Centrages (buse – plateau éjecteur) : 200 / 200 mm 1ère unité d’injection : Diamètre de vis : 80 mm Poids de dose max. en PS : 1400 g Volume de dosage : 1543 cm³ Pression d’injection : 2205 bar 2ème unité d’injection : Diamètre de vis : 45 mm Poids de dose en polystyrène : 278 g Njdpfxox Uqa Do Ah Uswg Volume de dosage : 305 cm³ Pression d’injection : 2336 bar Accessoires : 2 électrovannes Cascade 16 voies 3 tirages de noyaux sur plateau mobile 3 tirages de noyaux sur plateau fixe 20 zones de régulation pour canaux chauds Interface robot : Euromap 67 Dimensions : Poids total : 34 500 kg Dimensions totales (L x l x h) : 7,8 x 2,5 x 2,5 m Heures de fonctionnement : 45 400 h La machine peut également être utilisée comme machine monocomposant (1K).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, KM 500-3500 C2 Njdpfjx Uqadsx Ah Uowg Leto izdelave: 2007 Delovne ure v avtomatskem načinu: 60.000 h Zapiralna enota Zapiralna sila: 5.000 kN Dimenzije montažne plošče: 1270 x 1310 mm Razmak med stebri: 900 x 800 mm Min./maks. višina orodja: min. 480 mm Maksimalna odprtina: 1.650 mm Vbrizgalna enota Premer polža: 80 mm Prostornina vbrizga: 1.543 cm³ Teža vbrizga: 1.404 g Tlak vbrizga: 2.205 bar Električna in hidravlična oprema Nazivna moč motorja črpalke: 90 kW Moč gretja: 44 kW Mere in teža Neto teža z elektro omaro: 27.090 kg Mere (D x Š x V): 7,65 m x 2,55 m x 2,55 m

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2004, Krauss-Maffei KM 650-3500 C 1 650 t Krauss-Maffei injection moulding machine, year 2004, with only approx. 45,000 operating hours in automatic mode. The machine will be delivered fully refurbished. REFURBISHED MACHINE Nwjdpfohy Nnbox Ah Ueg Equipment: - 6 pneumatic cascade valves - 24 hot runner zones - 1 core puller on the fixed platen - 1 core puller on the moving platen - Electric screw drive Technical specifications: - CLAMPING FORCE: 6,500 kN - PLATEN SIZE: 1,540 x 1,440 mm - CLEARANCE BETWEEN BARS: 1,110 x 960 mm - MAX. MOULD OPENING STROKE: 1,150 mm - DAYLIGHT OPENING: 1,750 mm - SCREW DIAMETER: 90 mm - MIN. MOULD INSTALLATION HEIGHT: 600 mm - YEAR OF MANUFACTURE: 2004 - SHOT VOLUME: 1,953 cm³ - SHOT WEIGHT: 1,777 g - INJECTION PRESSURE: 1,742 bar

Stanje: dober (rabljeno), Leto izdelave: 2013, vpenjalna sila: 16.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 1600 t Premer vijaka: 135 mm Razdalja med stebri V: 1420 mm Nwedeyh I Emjpfx Ah Ueg Razdalja med stebri H: 1870 mm Prostornina vbrizga: 9662 cm3 Tip: Horizontalen Pogon: Hidravlični

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, vpenjalna sila: 1.700 kN, Vpenjalna sila: 1700 t Premer vijaka: 105 mm Nwedpfxoy Uk Emj Ah Usg Razdalja med podpornimi nosilci spredaj: 1420 mm Razdalja med podpornimi stebri zadaj: 1870 mm Prostornina vbrizga: 3721 cm³ Tip: Horizontalen Pogon: Hidravlični KUKA robot, 6 osi Stroj kot nov!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 4.517 h, vpenjalna sila: 16.000 kN, premer vijaka: 125 mm, injekcijska masa: 7.450 g, This 3-axis hydraulic injection moulding machine Krauss Maffei 1600-17200MC was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine offers a maximum shot weight of 7,450 g and a platen size of 2,600 x 2,110 mm. If you are looking for a high-quality injection moulding machine, you should consider the Krauss Maffei 1600-17200MC, which we currently have for sale. Contact us for further details. • Injection unit: 17200 • Tie bar spacing (h × v): 1,600 × 1,250 mm • Platen size (h × v): 2,600 × 2,110 mm • Daylight (x × y): 1,800 × 1,400 mm • Max. mould opening stroke: 2,500 mm • Mould installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mould opening force: 1,108 kN • Moving platen force: opening 177 kN / closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/back): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment: • Spare cylinder/screw set (1x) • Internal cooling system Nwedpfx Ahoyyyr Ts Ujg • Core pull device (2x)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, injekcijska masa: 2.452 g, Ta Krauss Maffei KM 800-6100MX je bila izdelana leta 2007. Ima zapiralno silo 8000 kN in vbrizgalni volumen 2695 cm³, zaradi česar je primerna za različne materiale kot so PA, PP, PE in ABS. Stroj je opremljen z robotskim sistemom Wittmann, ki izboljšuje možnosti rokovanja. Če iščete kakovosten brizgalni stroj, razmislite o hidravličnem brizgalnem stroju KM 800-6100MX podjetja Krauss Maffei, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Vbrizgalna enota: 6100 • Vbrizgalni volumen: 2695 cm³ • Vbrizgalni tlak: 2242 bar • Predelovani materiali: PA, PP, PE, ABS ipd. • Temperatura cilindra: do 450°C • Razpoložljivost: začetek leta 2027 Dodatna oprema • Ravnanje: Wittmann robotski sistem • Model: W743 Nwedoyyxc Depfx Ah Ujg • Moč: 400 V, 18 A / 12,5 kVA • Hodi osi: X 1200 mm, Y 2000 mm, Z 4000 mm

Stanje: dober (rabljeno), Leto izdelave: 2010, Raven odlagalni trak za avtomatizacijo (na primer vmesno odlaganje 'duharske izmene', pufer). Sestavljen iz dveh trakov: na enem so prazne škatle, na drugem pa napolnjene škatle. Oba transportna trakova sta opremljena s standardom EUROMAP67. Zaradi tega se lahko trakova programirata skupaj s strojem in odvzemnim robotom. Proizvajalec: KRAUSS MAFFEI Leto izdelave: 2010 Dolžina transportnih trakov: vsak po 6,00 m Skupna širina transportnih trakov: 1,75 m Nsdey Spixopfx Ah Uewg

Stanje: rabljeno, Krauss Maffei SE502 MC4 krmiljenje – odstranjeno iz KM 18 C3 - odstranjeno iz delujočega stroja - povsem delujoče Proizvajalec: Krauss Maffei Tip: SE502 Št. rezervnega dela: 5 Stanje: rabljeno Nedpfx Ahsrr Eh Ao Ujwg

Stanje: rabljeno, Krauss Maffei SR 500 računalniška kartica za MC3F – za MC3F procesni krmilnik - odstranjena iz delujočega stroja - popolnoma delujoča Proizvajalec: Krauss Maffei Nwsdpfjrr Ehqex Ah Ujg Tip: SR500/310 Številka rezervnega dela: 5 Stanje: rabljeno

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 29.000 h, vpenjalna sila: 50 kN, delovna prostornina: 59 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 3.700 kg, premer polžastega transporterja: 25 mm, Freight basis: ex location Delivery time: by arrangement Payment terms: 100% prior to machine takeover, net Manufacturer: Krauss Maffei Model: KM50-180AX Condition: from ongoing production Operating hours: approx. 26,000 CLAMPING UNIT: Nsdpfx Asppigdeh Uewg Clamping force: 50 t Opening stroke: 300 mm Min. mould installation height: 150 mm Max. mould installation height: 470 mm Tie bar distance (h x v): 410 x 360 mm Platen dimensions (h x v): 510 x 460 mm Centering (nozzle–ejector plate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Shot weight in polystyrene: 54 g Stroke volume: 59 cm³ Injection pressure: 2,500 bar CONTROL SYSTEM: MC5 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2x (hydraulic core pull unit) Air valves: 2 Hot runner control zones: 6 Robot interface: Euromap 67 Additional equipment: quality monitoring package GENERAL DATA: Installed heating capacity: 8.1 kW Pump drive power: not applicable Total connected load: motor + heating Total weight: 3,700 kg Overall dimensions L x W x H: 4.4 x 1.6 x 1.9 m

Stanje: rabljeno, Krauss Maffei IPC 5-133 za MC4 krmiljenje – odstranjeno iz KM, ni testirano. Proizvajalec: Krauss Maffei Rezervni del št.: 5 Stanje: rabljeno Nwodpsrr Egwefx Ah Uog

Stanje: rabljeno, Krauss Maffei menjalnik, višina 410 mm – višina 410 mm - odstranjen iz Krauss Maffei KM 200 - odstranjen iz delujočega stroja Nwedorr Efnepfx Ah Ujg - popolnoma delujoč Proizvajalec: Krauss Maffei Stanje: rabljeno

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, vpenjalna sila: 13.000 kN, Vpenjalna sila: 1300 t Nodpfxey Emure Ah Ujwg Premer vijaka: 105 mm Razdalja med vodili V: 1270 mm Razdalja med vodili H: 1570 mm Prostornina hoda: 4546 cm³ Tip: Horizontalen Pogon: Hidravlični KM1300 - 8100 MX Letnik 2016 KM1300MX Zapiralna sila v tonah: 1300 Razmak med batnimi drogovi: 1570 x 1270 mm Višina orodja min/maks: 700/1400 mm Mere plošč: 2210 x 1910 mm Odpiralni hod: 2350 mm Maks. odprtina: 3050 mm Vbrizgalna enota tip 8100 MX Premer polža: 105 mm Maks. vbrizgalni volumen: 4546 cm³ Spec. vbrizgalni tlak: 1778 bar Velikost centrirnega obroča: 315 mm Hidravlična jedra: 4 + 4 Število grelnih enot: 32 za orodje Število hladilnih krogov: 8+8 Električne kaskade: 12 Hlajenje: 12 + 12 Hidravlični vroči kanal: 1x EUROMAP 6

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Oprema: dokumentacija / priročnik, KraussMaffei KM650-4300 GX Machine Clamping force kN: 6500 Tie bar spacing (h x v) mm: 1110 x 960 Mould opening stroke mm: 1450 Minimum mould height mm: 450 Maximum mould height mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (HPS-M mixing) L/D ratio: 20 Injection pressure bar: 1839 Shot volume cm³: 2290 Control version: MC5 Screen language: German Condition: tested, operational Equipment: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Full insulation of the plasticizing cylinder for reduced energy consumption - 2 x pneumatic valve on moving mounting platen for blowing function - 2 x pneumatic valve on fixed mounting platen for blowing function - Pneumatic cascade control, 4-fold for hot runner Njdsy Apdqjpfx Ah Ujwg - Hydraulic cascade control, 4-fold for hot runner - Conveyor control - Mechanical robot interface to EUROMAP 18 - Hydraulic ejector plate including threaded holes and through holes in moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, 1-fold on moving platen - Pneumatic core pull system, 1-fold on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for "plasticizing" signal at HAN 3 A socket - Switching to holding pressure depending on cavity pressure (Kistler) - Quality statistics - Chip card reader unit - Graphic display and analysis package with 10 charts - Trend graphics - PV control - Interface for production data consisting of 5 potential-free contacts in control cabinet - 3 freely programmable inputs and outputs in control cabinet KraussMaffei Linear Robot LRX 350: - Fully integrated control - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demoulding stroke: 1200 mm - Maximum payload: 35 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Injection Moulding Machine Krauss Maffei KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13000 Platen dimensions (HxV) [mm]: 2210 x 1910 Tie bar spacing (HxV) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700-1400 Max. opening stroke [mm]: 3050 Max. ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm3]: 5195 Injection weight PS [g]: 4728 Injection pressure [bar]: 2296 Max. injection speed [g/s PS]: 186 Electrical/hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heaters power [kW]: 71 Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Cores: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow valves + 1 valve for hot runner needle control Hydraulic accumulator Nwsdpfxjy Hqwye Ah Ueg Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – cylinder thermal insulation

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref. No.: 18586 Manufacturer: KRAUSS MAFFEI Model: KM180-750 AX Electric Machines Year of Manufacture: 2011 Clamping Unit Clamping force: 180 tons Opening stroke: 1050 mm Tie bar distance (h x v): 560 × 510 mm Min. mold height: 200 mm Max. mold height: 600 mm Platen size (h x v): 790 × 740 mm Injection Unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight (PS): 357 g Injection pressure: 1892 bar Dimensions and Weight Dimensions LxWxH: 6.07 x 1.92 x 2.01 m Machine weight: 6,500 kg Additional Information: 👉 Fully electric machine offering maximum precision, minimal energy consumption, and exceptional process stability. This machine is part of KraussMaffei’s proven AX series, renowned for its robust construction, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial products. Nwsdpfx Asw E E Evoh Uog Key Features: * Solid and durable construction for long-term use * High injection capacity and process stability * Reliable KraussMaffei MC5 control system * Suited for continuous industrial operation * Good spare parts availability The machine is equipped with a KraussMaffei linear robot (LRX-S100), enabling efficient and automated part removal, thereby increasing productivity and reducing cycle times. Thanks to its balanced performance and flexibility, this machine provides a highly attractive solution for both technical components and series production. The machine was manufactured in 2011 and, as shown in the photos, is in good and fully functional condition.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 66.160 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.000 kN, premer vijaka: 60 mm, delovna prostornina: 679 cm³, Clamping force: 3,000 kN Maximum tool opening force: 160 kN Moving platen opening force: 86 kN Moving platen closing force: 68 kN Clamping platen (H x V): 995 x 1,050 mm Clear space (H x V): 630 x 630 mm Mold opening stroke: 820 mm Minimum mold installation height: 330 mm Maximum opening width: 1,150 mm Ejector stroke: 200 mm Ejector force forward/backward: 58 kN Injection unit: Screw diameter: 60 mm L/D ratio: 21 Nodpfey Nk Uqjx Ah Uowg Injection pressure: 2,000 bar Shot volume: 679 ccm Shot weight (PS): 618 g Injection flow: 325 ccm/s Screw speed: 259 rpm Plasticizing rate: 58 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Rated pump motor power: 45 kW Installed heating capacity: 23 kW Number of heating zones (cylinder): 6 Oil filling: 720 liters Dimensions and weights: Installation space approx.: 6.20 x 2.20 x 2.40 m Total weight: 12,500 kg Maximum mold weight: 3,430 kg Accessories: - Vibration isolation elements - 10-circuit water manifold Additional equipment: - 1 x air valve - 3 x core pulls - 3 x hot runner control zones - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 57.752 h, vpenjalna sila: 13.000 kN, premer vijaka: 105 mm, skupna masa: 83.000 kg, Hydraulic injection moulding machine from 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It is equipped with a hydraulic-mechanical two-platen clamping system and a robust motor current of 261 A. If you are in the market for a high-quality injection moulding machine, you should consider the Krauss Maffei 1300-12000 MC we have for sale. Contact us for further details. • International model designation: 12000 MC / 1300 • Operating hours: 57,752 h • Operating voltage: 400 V, 3-phase, 50 Hz (400/230 V European standard) • Motor current: 261 A • Heating current: 239 A • Total motor current: 245 A • Motor fuse: 315 A • Heating fuse: 250 A • Main switch: 6-pole, heating and current separated • Sockets: Service socket Schuko 10 A; 3x Schuko 16 A; 2x CEE 16 A; 2x CEE 32 A • Oil-cooled pump motor: IP54 • Fan for cabinet cooling Control System and HMI • MC4 32-bit microprocessor control • TFT colour display • 3.5-inch floppy disk drive Clamping Unit • Hydraulic-mechanical 2-platen clamping system • 4 pressure pads integrated in the moving platen • Hydraulic central ejector • Hydraulic core pull control • Hydraulic safety door on operating side • Minimum mould height: 700 mm • Maximum mould height: 1400 mm • Maximum opening stroke: 2250 mm • Maximum daylight opening: 2950 mm Injection and Plasticising • PV-controlled injection unit • Thermoplastic plasticising unit, wear-resistant • Screw diameter: 105 mm • Non-return valve installed • Open nozzle design • Nozzle radius: 15 mm; nozzle hole diameter: 4 mm • Hydraulic screw drive with constant motor • Parallel plasticising possible • Plasticising unit: SP12000 • Maximum processing temperature: 450°C • Injection compression control adjustable via screen • Injection stroke control • Hold pressure control • Injection speed control Hydraulics, Lubrication, Cooling • Regenerative pump control system • Internal oil filtration system • Oil monitoring system • Oil cooler for water supply: max. 31°C • Cooling water pressure: 4-6 bar Temperature Control • 8 temperature control zones for hot runners Nwodpfx Ajyx Ez Rjh Ueg • Adaptive temperature controllers • Maximum output per temperature channel: 2 kW • Temperature controllers supplied with 230 V Monitoring and Software • Quality monitoring package • Process monitoring system • Tolerance band monitoring • Cycle analysis display • Cycle data storage for up to 20,000 cycles • Event log • Alarm history • Graphic process curves • Trend diagrams for 12 parameters Interfaces and Connectivity • RS232 interface • Ethernet interface TCP/IP • Euromap 12 interface • Euromap 63 / SPI software support • Interface for external temperature sensor 20 mA • Central computer interface • MDC (machine data collection) interface with 5 contacts • Volt-free contact for dosing unit

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Screw diameter: 105 mm Shot weight in polystyrene: 4727 g/PS Nedjtrbcbjpfx Ah Uswg Clamping force: 2300 kN Platen size: 2830 x 2400 mm Opening stroke: 3700 mm Mold height: 1100-1800 mm Injection volume: 5195 cm³ Max. injection pressure: 2296 bar Dimensions: 14.2 x 4.15 x 2.84 m Total weight: 143 t Tie bar spacing: 2000 x 1600 mm Robot system, core pulls, hot runner controller - The machine is in very good condition - Complete set of cutters also available - Including a conveyor belt and robot systems (Model 2012)

Leto izdelave: 2016, stanje: kot nova (razstavni stroj),

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, obratovalne ure: 111.569 h, vpenjalna sila: 10.000 kN, This 6-axis hydraulic injection moulding machine Krauss Maffei 1000-8000 M was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, a Y-axis travel of 1400 mm, and a Z-axis travel of 3500 mm. The machine offers a maximum injection pressure of 185 bar and a dosing stroke of approx. 465 mm. If you are looking for a high-quality injection moulding machine, consider the Krauss Maffei 1000-8000 M, which we have available for sale. Please contact us for further details. • Injection unit • Screw rotation speed: 92 rpm • Injection speed stages: • 25% → 23 mm/s • 50% → 46 mm/s • 75% → 69 mm/s • 100% → 92 mm/s • Injection stroke: 200 mm forward stroke used for actual shot injection • Dosing stroke: approx. 465 mm maximum screw travel during plasticising • Maximum injection pressure: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar • Injection pressure: 185 bar • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Closing pressure drop: approx. 4-6 bar/min • Proportional valve pressure range: • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm Nedpfx Aheywlvre Uowg • Heating system • Number of heating zones: 9 • Example power ratings for cylinder heaters: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Recorded operating voltages: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. -1 K to +2 K • Condition / maintenance relevant data • Machine alignment tolerance: