Stroji za brizganje - popolnoma električni

Krauss Maffei Krauss Maffei KM50-180AX, 2013

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, obratovalne ure: 24 h, Prodajem potpuno kompletnu liniju za obradu i ljuštenje luka s M&P mašinama za ljuštenje. Sastav linije uključuje: - 6x M&P mašina za ljuštenje luka Nedpfx Ajtzmifjg Tewc - Sve transportne trake i elevatore za prijenos oljuštenog, neoljuštenog i otpadnog materijala - Inspekcioni sto - Sve radne platforme - Sva spremišta (bunkeri) za sirov (neoljušten) materijal Kompresori na zračni pogon nisu uključeni u cijenu, ali za ozbiljne upite mogu ponuditi dodatnu opremu. Kapacitet linije: 2700–4500 kg/h oljuštenog luka.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, 259 RABLJENA linija za arapski hleb. TEHNIČKI PODACI: - kapacitet 3.500-9.000 kom/h, - prečnik 15-38 cm, - maksimalno 3 reda, - radna širina 100 cm, - godina proizvodnje: 2024. OPREMA: - delilica testa - pred-fermentor - valjanje - završni fermentor - tunelska peć + 2 gorionika - rashladna transportna traka 80 m Nodpfx Aox Tiqfsg Tewc - staker / uređaji za slaganje i brojanje. VAŽNO: Dodatno, linija može biti opremljena mašinom za pakovanje: Hartmann. Navedena cena je bez PDV-a. PRIČAMO ENGLESKI, NEMAČKI, FRANCUSKI, RUSKI, UKRAJINSKI. U našoj ponudi možete pronaći pekarske peći, peći za kolica, etažne peći, konditorske peći, prodajne peći, pekarske mašine, linije za hleb, linije za zemičke, linije za peciva, linije za kroasane, mašine za bagete, mikser-mašine, mešače, valjaonice, mašine za kroasane. Pogledajte sve naše oglase.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year of manufacture: 2017) Year: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediately Clamping Unit: Clamping force: 500 tonnes Opening stroke: 1100 mm Tie bar spacing: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Nwsdpfexvingox Ag Tsc Screw length (L/D): 22 D Shot volume: 5430 cm³ Maximum injection pressure: 1600 bar General data: Motor power: 98 kW Heating power: 30 kW Clamping unit weight: 31 tonnes Injection unit weight: 15 tonnes Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pulls: 3 Robot interface: No Bimetallic screw/cylinder: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and belongs to the modern, tie-bar-less ENGEL Victory series, ideal for large moulds and high-precision production.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.250 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 390 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 450 mm, pomik osi Y: 200 mm, pomik po osi Z: 1.300 mm, prehod palice: 65 mm, skupna višina: 2.700 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, skupna masa: 12.000 kg, Oprema: dokumentacija / priročnik, Manufacturer: DMGMORI Model: CTX beta 1250 TC Year of manufacture: 2008 (Retrofitted in 2022) Control: Siemens 840D Solutionline Number of axes: 5-axis Equipment: - Automatic tool changer - Swivel head as B-axis - Belt filter system with high-pressure coolant system and chip conveyor - Differential pressure clamping for main / counter spindle - Workpiece pick-up device - Preparation for bar feeder (available as an option) Technical specifications: Max. turning diameter: 500 mm X-axis: 450 mm Y-axis: 100 mm Z-axis: 1300 mm B-axis: 220° Spindle bore: 65 mm Spindle speed: 5,000 rpm Spindle power: 34 kW Counter spindle speed: 6,000 rpm Counter spindle bar capacity: 52 mm Nedpsubyv Rsfx Ag Tewc Counter spindle power: 20 kW Tool changer: 24 stations B-axis interface: HSK 63 B-axis spindle speed: 12,000 rpm B-axis spindle power: 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Options: • Full enclosure • NC swivel head as B-axis • Coolant unit and chip conveyor • Documentation • Geometric accuracy within new machine tolerances Condition: - Machine fully functional - Geometry within the manufacturer’s tolerances for new machines - All wear parts replaced Retrofit 2022: - Z1 and Z2/3 linear guides replaced - Y-axis linear guide replaced - Main and counter spindle overhauled - Milling spindle overhauled - B-axis (bearings and clamping) replaced - Slide covers overhauled - Hoses and cables overhauled, drag chains serviced - Cabin doors repainted, viewing windows replaced - Maintenance carried out according to manufacturer’s specifications

Stanje: rabljeno, prevoženi kilometri: 1.044.000 km, moč: 368 kW (500,34 KM), prva registracija: 10/2008, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: črn, vrsta prenosa: samodejen, emisijski razred: Euro 5, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, je imel nesrečo, klimatska naprava, parkirni grelec, MAGNUM DXI 500 AUTOMATIC CRUISE CONTROL 2x TANKS DEFECTIVE ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST * DEFECTIVE, NOT ROADWORTHY VEHICLE EQUIPMENT * EURO 5 * AUTOMATIC TRANSMISSION * ENGINE BRAKE * CRUISE CONTROL * MULTIFUNCTION STEERING WHEEL * HANDS-FREE SYSTEM * AIR CONDITIONING * AUXILIARY HEATER * REFRIGERATOR * ELECTRIC WINDOWS * ON-BOARD COMPUTER * DIFFERENTIAL LOCK * COMFORT SEATS * SEAT HEATING * 2x TANKS * ADBLUE * PERMISSIBLE TOTAL WEIGHT: 18,000 KG * CURB WEIGHT: 7,700 KG * TIRE SIZE: * 1ST AXLE: 355 / 50 R 22.5 * 2ND AXLE: 295 / 60 R 22.5 * IMMEDIATELY AVAILABLE ---- * EXPORT SALES ONLY WITH A DEPOSIT (MIN. €500 - €2,000) Nodpfx Aowwywkeg Towc ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAY PLATES AND 17-21 DAY AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least €500.00 / €1,000.00 is required. Changes, errors and prior sale reserved! You can find more vehicles on our homepage: Sales are only conducted in accordance with our terms and conditions – see homepage. Important note: Despite careful checking of all details in our offer, errors may occur. Some may be caused by transmission errors within the systems of various platform providers. Therefore, we expressly state that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer in accordance with §145 BGB. Rather, it is information intended to initiate a contract. The information provided here is without guarantee and does not constitute warranted characteristics.

Leto izdelave: 2025, Stanje: novo, Nova mobilna nakladalna rampa FERBERG proizvajalca Mobilna rampa FERBERG proizvajalca se uporablja v skladiščih za nakladanje in razkladanje kontejnerjev ter vozil z viličarji, vozički ipd. Mobilna nakladalna rampa je most med nivojem tal in tovornim prometom. Omogoča neposreden dostop nakladalcu do karoserije vozila. Garancija 18 mesecev. Imeti standard CE. Dostava po vsej državi. Fleksibilen sistem popustov. Specifikacije: - Obremenitev nakladalne rampe – 8000, 12000, 16000 kg; Nwodpfjqxrhcjx Ag Toc - Skupna dolžina – 9400, 11900, 13400 mm; - Širina voznega dela – 2000, 2500 mm; - Delovna višina – 900-1750 mm; - Površina – pocinkana protizdrsna rešetka; - Nastavitev višine – s hidravlično črpalko; - Za premik nakladalne rampe se uporabi priključna naprava; - Barva – siva. Kompletni set: - Mobilna rampa – 1 kos; - Ročna črpalka (proizvedeno v Italiji) – 1 kos; - Priključna naprava za transport rampe z viličarjem – 1 kos; - Kolesa celovita – 2 kosa; - Gumijaste kolesne zagozde – 2 kosa; - Verige s karabinskimi kavlji – 2 kos. Dodatne možnosti: SL – Nastavljive podporne nogev HR – Dodatna ograja TC – Nadstrešek nad rampe vozišče; CLR – Izbira drugačne barve EHP – Elektrohydraulická stanica (220V) s kontrolnim tablom EHBP – Elektrohydraulická stanica (12V) z akumulatorjem Več na naši spletni strani. Prikazane fotografije so zgolj ilustrativne narave. Za podrobne informacije o prodaji se obrnite na proizvajalca.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Used injection moulding machine directly from the manufacturer! As a manufacturer, KraussMaffei is offering one of our pre-owned injection moulding machines for sale. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5000 kN - Tie bar spacing (h x v): 900 x 800 mm - Max. mould opening distance: 1170 mm - Min. mould installation height: 480 mm - Platen opening stroke: 1650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (Reverse: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1742 bar - Injection volume: 1953 cm³ - Shot weight for PS: 1777 g - Injection rate: 649 cm³/s - Nozzle contact force: 115 kN Njdpfx Agenh Rnuo Tswc Electrical Parameters - Pump drive power: 90 kW - Heating capacity: 44 kW Weight and Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m We generally deliver this system in a fully functional basic condition. As the original manufacturer, we can also offer various additional options depending on individual requirements, such as: - Upgrades for energy optimisation of the system - Integration with KraussMaffei digital products, if required - Plasticising unit conversions - Optional: Organisation and management of delivery (not included in the price) - Optional: Installation and commissioning (not included in the price) You benefit from our premium service and the option to purchase spare parts packages for wear components to ensure seamless operation of your newly acquired pre-owned system. Don't hesitate, contact us now for further information!

Stanje: dober (rabljeno), WEBER pipe extrusion line including: Nwedpfx Agsvryhye Tjc WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 14.500 h, Funkcionalnost: popolnoma funkcionalen, 1 used two-component injection moulding machine with robot and rotary table Manufacturer: ARBURG Model: 470S1100-400/290 Year of manufacture: 2017 Clamping force: 110 tons Tie bar spacing: 420 x 420 mm Min./max. mould installation height: 450 mm Opening stroke: 950 mm Screw diameter 1: 35 mm Max. shot volume: 154 cm³ Nwedpfx Agsu E E Suo Toc Injection moulded part weight: 141 g/PS Screw diameter 2: 30 mm Shot volume: 106 cm³ Injection moulded part weight: 97 g/PS Control system: SELGOCIA Equipment: - 3 core pulls - Vertical injection unit - Rotary table - 6-axis robot, manufacturer: KUKA, model: KR 16 Wikut, year: 2010 - Conveyor belt - Safety fence

Stanje: rabljeno, Leto izdelave: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Technical Details - Capacity: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) Njdpferkgy Usx Ag Tewc - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck personalization: 29/25 - Operating hours: 47,000 - Machine has been regularly maintained Machine is equipped with: - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system - Sidel oven & blowing wheel for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Comprehensive spare parts list available upon request.