Navpični obdelovalni center

Hurco VMX 42

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 2.195 h, potovalna razdalja osi X: 1.067 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, proizvajalec krmilnikov: HURCO, skupna višina: 3.187 mm, obremenitev mize: 1.360 kg, skupna masa: 8.400 kg, največja hitrost vretena: 16.000 obr/min, moč vretenovega motorja: 36.500 W, število mest v zalogovniku orodij: 40, teža orodja: 7.000 g, kot vrtenja osi B (min.): 90 °, kot vrtenja osi B (max.): 90 °, kot vrtenja osi C (maks.): 360 °, Ta 5-osna Hurco VMX 42 SRTi je bila izdelana leta 2018. Kot univerzalni obdelovalni center nudi napredne sposobnosti za kompleksna in natančna obdelovalna dela. Če iščete visokokakovostne funkcije rezkanja, razmislite o stroju Hurco VMX 42 SRTi, ki ga imamo na voljo za prodajo. Za dodatne informacije nas kontaktirajte. Dodatna oprema • Prostornina hladilne tekočine (l): 314 • Opremljena z: Renishaw kalibracijo, hlajenjem skozi vreteno, linearnimi merili Prednosti stroja Tehnične prednosti stroja • Delovno območje / polmer (mm): 1270 x 610 / 600 Fpedpfxex Sz D Us Abvod Dodatne informacije Stroj je še vedno priključen na električni tok Dimenzije Globina stroja: 4954 mm

Stanje: rabljeno, Leto izdelave: 2011, Tehnične podrobnosti x-hod: 660 mm y-hod: 355 mm Fpedpfxjxpwy Ds Abved z-hod: 455 mm Krmilnik: WinMax Glavno vreteno: Maks. število obratov: 10.000 min⁻¹ Pogon glavnega vretena: 11 kW Orodni priključek: SK 40 Delovna miza: Vpenjalna površina mize: 760 x 355 mm Izmenjevalec orodij: Število mest za orodja: 20 poz. Orodni priključek: SK 40 Skupna potreba po moči: 14 kW Teža stroja ca. 3,5 t Prostorska zahteva ca.: 3,5 x 3,0 x 2,6 m Transportni vijačnik za ostružke

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 117.713 h, potovalna razdalja osi X: 1.060 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, skupna višina: 2.770 mm, širina mize: 3.750 mm, skupna masa: 6.650 kg, največja dolžina izdelka: 4.535 mm, This 3-axis Hurco VMX 42 was manufactured in 2007. It features an X-axis travel of 1,060 mm, a Y-axis travel of 610 mm, and a Z-axis travel of 610 mm. The machine boasts a robust table size of 1,270 × 610 mm and a maximum table load of 1,100 kg. If you are seeking high-quality machining capabilities, you should consider the Hurco VMX 42 vertical machining center we have for sale. Contact us for further details. • Spindle nose to table: 150 - 760 mm • Programmable feed rate: 3 - 7,600 mm/min • Feed rate via console: 3 - 11,400 mm/min • Rapid traverse X/Y/Z: 35 / 35 / 30 m/min • Guideways: Linear guides (X, Y, Z) • Positioning accuracy: ±0.01 mm • Repeatability: ±0.005 mm • Table size: 1,270 × 610 mm • T-slots: 5 (DIN 650) T-slots • Slot width: 18 mm • Distance between T-slots: 100 mm • Maximum table load: 1,100 kg • Automatic tool changer type: Drum magazine • Number of tool positions: 24 • Maximum tool diameter: 80 mm • Maximum tool weight: 7 kg • Maximum tool length: 300 mm • Tool holder: SK 40 (DIN 69871) • Pull stud: ISO 7388/II Type B • Coolant tank capacity: 340 liters • Machine-specific data • Spindle drive power (continuous): 18.0 kW • Maximum torque: 720 Nm • Torque at 1 min cycle: 237 Nm • Spindle speed range: 10 - 12,000 rpm • Installation position (mounting) • Measurement system: Photoelectric • Standard: Motor rotary encoder • Central lubrication system: 1 pump (X, Y, Z) • Electrical connection: 38 kVA / 55 A Fodpjynil Rjfx Abvopd • Voltage: 400 V • Compressed air connection: 6 bar / 0.3 m³/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 63.442 h, proizvajalec krmilnikov: HURCO, model krmilnika: UltiMax, število osi: 3, Ta 3-osni stroj Hurco VMX 42 je bil proizveden leta 2006. Opremljen je z orodnim magazinom za 24 mest, transportnim trakom za ostružke ter rezervoarjem za hladilno tekočino s črpalko. Obratovalne ure znašajo 22.612,4, delovne ure vretena pa 6.344,2. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra Hurco VMX 42. Za več informacij nas kontaktirajte. Fedpfxsyb Ryij Abvepd

Stanje: rabljeno, Leto izdelave: 1985, Grinding length 600 mm Grinding width 200 mm Total power requirement 7.5 kW Machine weight approx. 2.3 t O F F E R Fedpowd Tx Usfx Abvjpd We can offer you, subject to prior sale and errors, without obligation, ex-stock: JUNG Horizontal precision surface & profile grinding machine with microprocessor control Model JF 520 MS Year of manufacture 1985 2225 _____ Max. grinding length (table longitudinal movement 600 mm): 600 mm Max. grinding width (cross movement 230 mm): 200 mm Max. grinding height under the wheel: approx. 230 mm Max. distance table – spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep feed grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. grinding head vertical speed: 500 mm/min Grinding wheel size: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, stepless: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total drive approx.: 7.5 kW - 400 V - 50 Hz Weight approx.: 2,300 kg Accessories / Special Features • Microprocessor program control (SIEMENS) with simple display. Program sequences are set via decade switches and stops (with vernier) and monitored on the display. • Programs: Plunge grinding with/without cross positioning, surface grinding with incremental or continuous cross movement, creep feed grinding in conventional or counter direction with/without cross positioning. All programs include automatic roughing, finishing, sparking out cycles and automatic retraction. • Automatic straight dressing device AF 65 S with automatic compensation of dressing amount and automatic adjustment of spindle speed for consistent cutting speed (with display) • DIAFORM – wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed unit with feed rate and motor load display • Short stroke device for controlling the table reversal and cross table clamping • Swivelling JUNG sine magnetic chuck 450 x 180 mm, mounted. Additional swivelling sine magnetic chuck 350 x 175 mm, fine pole with stop. • Coolant system with paper band filter, further accessories, operating manual Condition: Very good, with accuracy protocol from JUNG technician! Please click here for a video of the machine: Delivery: ex-stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Proizvajalec: HURCO Tip: VMX42i Leto izdelave: 2019 Krmiljenje: Hurco WinMax Orodni vpenjalni sistem: SK40 Pomik X: 1.067 mm Pomik Y: 610 mm Pomik Z: 610 mm Fpsdpfx Abjyc Sn Rovsd Območje vrtljajev: 12.000 vrt/min Največja obremenitev mize: 1.000 kg Velikost mize: 1.270 × 610 mm Število orodij v magazinu: 24

Stanje: dober (rabljeno), Leto izdelave: 2012, moč: 0,018 kW (0,02 KM), potovalna razdalja osi X: 1.067 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, vrtljajska hitrost (min.): 12.000 obr/min, Hurco Machining Center V 42 T 3-axis technology Travel range in X: 1067 mm Travel range in Y: 610 mm Travel range in Z: 610 mm Table dimensions: 1270 x 610 mm Spindle speed: 12,000 rpm 40-position tool changer Chip conveyor Simulation graphics Fjdpfxjtxrbio Abvopd Tool and material library Pocket milling with island Synchronous tapping without floating chuck WinMax control ICS high-pressure through-spindle coolant

Stanje: pripravljen za uporabo (rabljen), Swing diameter over bed/cross slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, X/Z travel: 220mm/635mm, spindle speed: 5,000 rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool stations: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4,500kg. An on-site inspection is possible. Fpedpfxsv Uqcgs Abvod

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VMX42, potovalna razdalja osi X: 1.060 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 600 mm, dolžina podajanja os Z: 600 mm, hitrost pomika os X: 11 m/min, hitrost podajanja osi Y: 11 m/min, hitrost podajanja os Z: 11 m/min, model krmilnika: HURCO SingleMAX, HURCO VMX42 CNC Milling Machine with MAX Control Fjdpfjylbd Hjx Abvepd Manufacturer: HURCO Model: VMX42 Year of manufacture: 2006 Original price: €88,000.00 net (€104,720.00 gross) Working Area Travel X-axis: 1060 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Distance spindle nose to clamping table: 150 - 760 mm Table clamping surface: 1270 x 610 mm Table load, evenly distributed: 680 kg T-slots in table (DIN 650): 5 T-slot width: 18 mm (H8) Slot spacing: 100 mm Drives Main drive - working spindle Drive type: Three-phase motor Power S1: 21.0 kW Max. torque at: 1450 rpm Torque S1: 142 Nm Feed drives Type of drive: Three-phase motor Feed Rates Programmable: 3 - 7600 mm/min* (contour dependent) Adjustable via console: 3 - 11,400 mm/min* (contour dependent) Rapid traverse X-, Y-, & Z-axis: 30 m/min / 30 m/min / 20 m/min Spindle Head Tool holder: SK 40 DIN 69871 Pull stud: DIN ISO 7388/II Type B Speed range: 10 - 10,000 rpm Design Features Material machine bed: Cast iron Linear guide design: X, Y, Z Central lubrication: 1 pump (X, Y, Z) Automatic Tool Changer Magazine type: Drum magazine Tool stations: 24 Tool diameter, full index: 80 mm Max. tool weight: 7 kg Max. tool length: 300 mm Max. total weight: 82 kg Position Measuring Systems Type of measuring system: Photoelectric Standard: Rotary Position: Motor side Measuring method: Transmitted light Resolution Internal controller: 0.0005 mm Measuring system: 0.001 mm Accuracy to VDI/DGQ 3441 Positioning accuracy (travel): +/- 0.01 mm Repeatability (travel): +/- 0.005 mm Cooling Coolant tank capacity: 340 liters Installation Data Length x Width x Height: 4650 x 3400 x 2770 mm Weight: 6,800 kg Electrical connection: 38 kVA / 55 A / 400 V Compressed air connection: 6 bar / 0.3 cbm/min Control HURCO SingleMAX 1 monochrome monitor 2 software units (1 x plain text dialog programming at the machine + 1 x for ISO code programming via external programming device or CAD/CAM system via RS-232 C or V 24 interface) Pentium technology, 1.6 GB hard drive, 8 MB RAM, parallel and serial data interfaces, DOS-compatible 3.5" 1.44 MB drive. System-internal self-diagnosis, DOS directory structure Includes: 1 x color monitor Pocket milling with islands Synchronous tapping (tapping without compensating chuck) Detachable electronic handwheel DXF software: import of geometry data from DXF file and entry of technological data (tool number, radius compensation, safety clearance, machining depth, and plunge feed) Accessories High-pressure cooling system for coolant feed through spindle (coolant type: emulsion / coolant pressure 20 bar / integrated hydraulic tool clamping system). Cooling air switchable via coolant nozzles Chip splash protection enclosure Machine lamp Machine manual on CD

Stanje: rabljeno, Leto izdelave: 2002, Technical Details: X-axis travel: 1060 mm y-axis travel: 610 mm z-axis travel: 610 mm Control unit: Ultimax 4 Spindle speed: 10 – 10,000 rpm Tool holder: SK40 Tool magazine: Drum magazine with 24 slots Feed rate (XYZ): 3 – 7,000 mm/min Rapid traverse (XY): 30 m/min Rapid traverse (Z): 20 m/min Table size: 1220 x 510 mm Table load capacity: 1.1 t Compressed air connection: for 6 bar Total power requirement: 30 kVA Machine weight approx.: 6.28 t (without attachments) Fpsdpfxsu Iddns Abvjd Machine dimensions approx. LxWxH: 2.82 x 3.2 x 2.7 m Chip conveyor dimensions LxWxH: 3.0 x 0.65 x 1.5 m Enclosed working area with chip and splash guard cabin Including cooling unit with IKZ 30 bar supply (size 1200x500x150mm), capacity for 340 litres Spindle with through-spindle coolant (IKZ) Scraper belt chip conveyor Control panel with two screens Electronic handwheel Attention! The tool change gripper arm is missing from the machine! The control has been set to disabled/off accordingly. i.D.

Stanje: rabljeno, Leto izdelave: 2013, Technical Specifications: X-axis travel: 760 mm y-axis travel: 460 mm z-axis travel: 460 mm Control: Heidenhain TNC 620 Power-on hours: 20,246 h Spindle operating hours: 7,724 h Spindle speed: 12,000 rpm Spindle torque: 75 - 95 Nm Spindle taper: SK40 Tool magazine with: 24 positions Table size: 900 x 410 mm Max. table load: 350 kg Feed range: n/a Rapid traverse: 36 m/min Interface: RS232 Control voltage: 24 V DC Compressed air connection: 6 / 8 bar Total power requirement: 20 kVA Machine weight approx.: 6.0 t Fsdpfx Abevhbpdovspd Dimensions of coolant system: 1.7 x 0.7 x 1.35 m Approx. machine dimensions (LxWxH): 1.9 x 2.3 x 2.45 m TNC 620 (Contour control with up to 5 controlled axes, especially suitable for universal milling), can be integrated into network Safety doors with shatterproof plastic windows Chip conveyor Hydraulic unit Coolant filtration unit Rittal chiller on control cabinet Work area interior lighting Handheld control unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 11.920 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.067 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 35 m/min, hitri pomik os Y: 35 m/min, hitri pomik na osi Z: 30 m/min, nazivna (navidezna) moč: 66 kVA, vrtilni moment: 118 Nm, proizvajalec krmilnikov: HURCO, skupna višina: 3.160 mm, skupna dolžina: 2.200 mm, skupna širina: 3.170 mm, širina mize: 1.270 mm, dolžina mize: 610 mm, obremenitev mize: 1.360 kg, premer vrtljive mize: 600 mm, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 2.034 h, moč vretenovega motorja: 36.500 W, število mest v zalogovniku orodij: 40, dolžina orodja: 250 mm, premer orodja: 75 mm, teža orodja: 7.000 g, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: transportni trak za ostružke, We are selling a lightly used HURCO VMX 42 SRTi. Main spindle operating hours: 2,034 h The machine has been in production since early 2018 and is currently still in use, so inspections are possible at any time. Application: Approx. 95% of machining has been on aluminum. Features: - Integrated oil mist extraction system - Renishaw probe for calibration - 5-axis simultaneous machining Fpedpfx Asyi T Ulsbved Comprehensive range of accessories included: - Tools, holders, fixtures - Storage cabinet - Workshop trolley - Chip cart Total accessory value: approx. €50,000 net (detailed inventory available). There is also the option for the buyer to manufacture and supply parts for the seller in the future—the corresponding machining programs are already available.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Pomik X/Y/Z: 1060mm/610mm/610mm, dimenzije mize X/Y: pribl. 1270mm/610mm, največja obremenitev mize: 1100kg, moč vretena: 18kW, podajanje: 7600mm/min, hitri pomik: 30m/min, število mest za orodja: 24, orodni priključek: SK40, hitrost vrtenja: 12000obr/min, pozicijska natančnost: +/-0,01mm, ponovljivost: +/-0,005mm. Dimenzije stroja X/Y/Z: pribl. 450mm/3750mm/2800mm, teža: pribl. 6700kg, krmilje: Hurco Ultimax 4. Dokumentacija na voljo. Ogled na lokaciji je možen. Fjdpfx Abeyh Nvmjvjpd

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 3 Fodpfxsuhbt Rs Abvspd MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 12,000 rpm - Spindle drive power: 7.6 kVA LINEAR AXES - Travel distance X/Y/Z axes: 500 / 410 / 610 mm TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 26 - Tool change time: 0.7 sec TABLE - Table size: 650 x 400 mm - Max. table load: 200 kg ELECTRICAL SUPPLY - Supply voltage: 220 V - Total drive power: 25 kVA WEIGHT AND DIMENSIONS - Space requirement: 1,640 x 2,100 mm - Machine height: 2,274 mm - Machine weight: 2,250 kg MACHINE HOURS - Operating hours: 9,070 h ACCESSORIES - Control: BROTHER A00 - Electronic handwheel - Interface: RS232 - Workpiece probe system: Renishaw OMP 60 - 4th axis: LEHMANN without frequency inverter - Chip conveyor - Coolant tank - Internal coolant supply (IKZ): 70 bar - Oil mist extractor: AAF Astrosta - Electrical transformer - Tool holders: 42 pcs

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, številka stroja/vozila: M442-06206123DFA, potovalna razdalja osi X: 1.060 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, model krmilnika: Ultimax 4, največja hitrost vrtenja: 10.000 obr/min, TEHNIČNE PODROBNOSTI Pomik X-os: 1.060 mm Fsdpfx Aoyfpi Dsbvepd Pomik Y-os: 610 mm Pomik Z-os: 610 mm Hitri pomik X/Y/Z: 30 m/min Razdalja med delovno mizo in vretenom: 150 - 760 mm Območje vrtljajev: 10.000 o/min Vretenov motor: 15 kW Vpenjalno mesto orodja: SK 40 Izmenjevalec orodij: 24 pozicij Velikost mize: 1.300 x 630 mm Maks. obremenitev mize: 1.100 kg PODROBNOSTI STROJA Krmiljenje: Ultimax 4 Priključna moč: 24 kW Dimenzije in teža Zaseden prostor (DxŠxV): 4,9 x 3,8 x 2,75 m Teža stroja: 6.500 kg OPREMA Transporter odrezkov