Jkf Bf 90-3.5 nakup rabljenega (13.328)

Stanje: rabljeno, barva: drugo, prva registracija: 12/2005, Leto izdelave: 2005, Serijska številka: 27.46.610.296 Na zalogi imamo več kot 100 osi. Če ne najdete želenega izdelka, nas prosimo kontaktirajte. Lajdpfxjvddw Ne Al Nja

Leto izdelave: 2006, stanje: dober (rabljeno), BF Tec milling machine Type: 7550C X-axis travel: 500 mm Y-axis travel: 300 mm Z-axis travel: 350 mm Table: 240 x 800 mm Speed: 1,750 rpm Spindle: ISO 40 Year of manufacture: 2006 Laodpfoncbndox Al Nea Digital readout: Jenix Dimensions: 125 x 125 x 200 cm (L x W x H)

Leto izdelave: 2021, stanje: kot nova (razstavni stroj), Max. drilling diameter 50 mm Max. throat depth 1600 mm Ledpfjh H Edijx Al Noaa Min.–Max. distance spindle–base plate 350–1220 mm Spindle speeds (16) 25–2000 RPM Spindle taper MK5 Spindle travel 320 mm Spindle feed (16) 0.04–3.2 mm/rev Travelling distance of drill head 1250 mm Table dimensions 500×630 mm Motor power 4 kW

Stanje: rabljeno, Značilnosti: Sestavljen iz dveh motoriziranih ukrivljenih transporterjev pod kotom 90°. Polmer ukrivljenosti: 3 m po osi. Skupna dolžina v raztegnjenem stanju: 4,80 m. Skupna širina strukture transporterja: 750 mm. Lakirani bukovi letvi: 620 x 54 x 42 mm. Nastavljiva višina od tal: 500–650 mm. Lasdpfox Sx Iqox Al Nja Pogonski sistem z verigami in zobniki. Stransko vodenje in spodnji povratek po drsniku iz sintetičnega materiala. Integrirani pogonski reduktorski motor. Stikalo v krmilni omarici z zaščitnim odklopnikom. Nujna zaustavitev in glavno stikalo. Električna omara z elektronskim regulatorjem hitrosti za oba ukrivljena gumijasta traka.

Stanje: novo, Tip: Z4A Število vrtalnih vreten: Na voljo so različne izvedbe glave – 4x3 Razdalja med prvim in zadnjim vretenom: 2300 mm Ljdpfxehmbkte Al Neaa Nastavljiva hitrost vrtanja Višina delovne mize: 840 mm Dimenzije mize: 600x2350 mm Število vpenjal: 8 Moč motorja: 6 kW (4x1,5) 400 V Št. vrtljajev motorja: 2840 vrt./min Delovni tlak zraka: 6-8 bar Teža: 425 kg Transportne dimenzije: 2450x960x1550 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H18/X2090/202/00162, nosilnost: 14 kg, doseg roke: 1.000 mm, natančnost ponavljanja: 0,03 mm, TECHNICAL DETAILS Load capacity: 14 kg Arm reach: 1,000 mm Repeatability: 0.03 mm Maximum rotation angle: 350° Maximum speed: 16.8 °/s Maximum speed: 0.6 m/s Platform positioning accuracy: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (without robot arm, W x D x H): 890 x 1,120 x 1,000 mm Total weight: 730 kg Power supply: 1 x 230 V / 16 A Battery capacity: 5.8 - 8.7 kWh Number of laser scanners: 3 Scan plane height: 150 mm Lajdpfxsyzyxce Al Nea Compressed air tank: 0.75 l / 7 bar Wrist protection rating: IP67 Arm protection rating: IP65 Overall system protection rating: IP20 Maximum average ground contact pressure: 10 N/mm² Drive type: Differential drive EQUIPMENT Tool storage station: 4 tools per storage station Tool change system: MPS032 Navigation: based on laser scanner data Interfaces: WLAN, LAN, fieldbus Multi-coupling: compressed air, power supply, 2x Cat5e, 26 x 1 mm contacts Optical and acoustic effects: 4 LED units, memory for up to 16 audio files

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Stroj za izdelavo žebljev Proizvajalec: WAFIOS Model: N90 Leto izdelave: 1994 Območje premera: 2,5-3,8 mm Dolžina žebljev: 50-90 mm Kapaciteta – kosi/min: 800 Lajdpsuhxqmefx Al Nja Stroj vključuje avtomatski rezalnik žice in čistilec žice!!

Leto izdelave: 2024, stanje: novo, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) ✔ Moč: 22 kW Lodpfxeiq Uz Hs Al Neaa ✔ Dolžina rotorja: 870 mm ✔ Premer rotorja: 270 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 38 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 8 m3/h* ✔ Vsipna odprtina: 2031 x 1565 mm ✔ Dimenzije D/Š/V: 3,21/1,97/2,04 m ✔ Teža: 2450 kg 2 leti garancije ali 2000 delovnih ur

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Two pre-owned briquetting presses from Pawert SPM / 3 briquetting presses Di Più For the Pawert presses, as per the following configuration: - 2 steel silos, each approx. 20 m³ effective capacity, including silo discharge equipment - 1 briquetting press, Manufacturer: SPM PAWERT AG, Type 84/1 - 90/200, Serial No.: 1060, Power: 55 kW - 1 briquetting press, Manufacturer: SPM PAWERT AG, Type 96/1 - 90/200 SBP, Serial No.: 1140 - Complete transport line incl. 2 cooling sections, conveyor belts, roller conveyors, etc. - 2 cutting stations - 1 soundproof cabin for the cut-off saws - 1 feeder, manufacturer: KÖRA, model Packmat, likely type EF-235 - 1 shrink wrapper, manufacturer: KALLFASS, type Super Wrap 650 – De luxe – inline, serial no.: VD 03.08.445, year: 2000 incl. shrink tunnel - Accessories: control & power cabinets, PC controls, frequency converters - Spare parts as per Appendix 1 Plant boundaries: - Material input: flange of the chip conveyor in the sawdust hopper before the presses - Power supply: input terminals in the Pawert control cabinet ––– Technical Data (per machine): Type: Di Più BRIK MB100 Year of manufacture: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Compaction pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Moisture content: optimal 8 – 12 % Particle size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Lajdpfx Aljyiyhfs Nja Drive: hydraulic piston press ––– Equipment: Feed hopper Screw conveyors Hydraulic system Switch cabinets Saws for briquette length cutting Protective covers & safety systems Discharge units ––– Scope of delivery: 3 complete Di Più MB100 briquetting presses Saws Conveyor technology & accessories Spare parts by arrangement ––– Fields of application: Sawmills Wood processing Biomass operations Briquette production for energy & sales Location: 3383 Inning Transport: organization available upon request Price: on request Sale as single units or as a complete package possible

Stanje: novo, Leto izdelave: 2025, Optimizacijska žaga s potisnim sistemom TRSI – Najboljša v Evropi Če iščete inovativno, hitro in zanesljivo avtomatsko optimizacijsko žago, je TRSI prava izbira. Prilagodljiv vašim potrebam, je popolna za programirane ali optimizirane reze in se prilagodi različnim proizvodnim panogam. Popolna za različna področja: • Pakiranje – Natančno rezanje posameznih plošč ali paketov, idealno tudi za rezanje zamaškov. • Okvirji – Napredna optimizacija za izbiro kakovosti in napak, zmanjšanje odpadkov. • Pohištvo – Milimetrska natančnost za rezanje dokončanih polizdelkov z vrhunsko kakovostjo. • Talne obloge in parket Tehnologija, ki naredi razliko TRSI je opremljen z naprednim programskim sistemom, ki poenostavi delo in optimizira procese: • Rezače po programu: Zaporedja fiksnih dimenzij za ponovljive in natančne operacije. • Optimizirani rezi: OL različica: Optimizacija po dolžini za zmanjšanje odpadkov. Lsdpfx Alsv Iqcme Nsaa E različica: Celovita optimizacija z odpravo napak za maksimiranje donosa. • Prilagodljive prioritete optimizacije: Izberite med komercialno vrednostjo, odpadki, količino, dolžino ali mešano strategijo. • Takojšnja integracija z obstoječimi proizvodnimi sistemi, brez dodatnih vmesnikov. • Spletna tehnična podpora na voljo kadarkoli. • Intuitivni HD zaslon na dotik z uvozom podatkov prek USB-ja. • Industrijski CNC računalnik za neprekinjeno proizvodnjo. Ultra-natančno in hitro gibanje • Hitro pomikanje po jeklenih vodilih z krogličnimi ležaji in dvojnim vozičkom za gladke in natančne premike. • Brezkrtačni motorji visoke zmogljivosti za večjo hitrost in zanesljivost. • Ojačana struktura za popolno drsenje, brez vibracij in zdrsov. • Zaščitene poti z vidno pnevmatsko dvigalko za popoln nadzor v vsaki fazi rezanja. Močan in zanesljiv rezalni sklop • Trden poravnalnik s tihim pihanjem za udobnejše delovno okolje. • Pnevmatski pritisk na linearnih vodilih z krogličnimi ležaji za popoln oprijem. • Gumijasta kolesa z amortizacijo in sklopko v oljni kopeli, da zagotavljajo stabilnost in preprečijo zdrs. Oprema za maksimizacijo produktivnosti • Po meri izdelani nakladalniki za odpravo mrtvih časov in povečanje učinkovitosti. • Ročne in avtomatske tiskalnike za jasno in natančno označevanje polizdelkov. • Optimizirani razkladalni sistemi za vsak proizvodni proces. Zaupajte Cursal za proizvodnjo brez kompromisov S TRSI lahko vaše podjetje doseže nivoje učinkovitosti in natančnosti, ki jih še niste izkusili. Odkrijte opremo, nakladalnike in razkladalnike, ki bodo prilagodili vašo proizvodno linijo in optimizirali vsak proizvodni korak. Kontaktirajte nas še danes za svetovanje po meri in dvignite svojo proizvodnjo na naslednjo raven.

Stanje: novo, Leto izdelave: 2024, TVM Ø 600 – Visoko zmogljive rezalne naprave, prilagodljive vašim zahtevam TVM Ø 600 in TVM Ø 700 sta največji žagi, ki ju proizvaja CURSAL, z vertikalnim izmeničnim gibanjem rezalne žage (najhitrejši gib). Zato, če so parametri rezanja ustrezni, ni dvoma, da je to naprava, ki jo potrebujete. Nepremagljive prednosti TVM Ø 600: Nepremagljiv razmerje med ceno in kakovostjo: robustna in zanesljiva naprava po konkurenčni ceni. Enostavna uporaba in minimalno vzdrževanje: zasnovana je tako, da zahteva minimalno vzdrževanje, hkrati pa ohranja visoko učinkovitost skozi daljše časovno obdobje. Povečanje produktivnosti: TVM 600 bistveno zmanjša delovni čas, pri tem pa povečuje proizvodnjo. Modularna zasnova in popolna prilagodljivost potrebam strank: Serija TVM je zasnovana z modularnim sistemom, ki omogoča prilagoditev naprave specifičnim zahtevam vsake stranke. Proizvodne linije so dobavljene z "ključem v roke" rešitvami, pripravljene za uporabo. Vsestranost uporabe: TVM Ø 600 je idealen za: Elektropnevmatske omejevalnike za rezanje paketov plošč z ponavljajočimi se dimenzijami. Numerično krmiljene omejevalnike, kjer je potrebna visoka prilagodljivost dimenzij. Učinkovito ravnanje z materiali: Polizdelki so odstranjeni z uporabo transportnih trakov, odlagalnih miz ali valjčnih poti, kar zagotavlja neprekinjen in optimiziran proizvodni tok. Prednosti: Varnost za operaterja: zagotavljanje maksimalne zaščite za operaterja. Izboljšana ergonomija: optimizacija proizvodnih faz. Kompensacija obrabe materialov: brez potrebe po zamenjavi delov. Poenostavljeno vzdrževanje: zmanjšanje izpadov. Pripravljeno za CURSAL dodatke: za izpolnjevanje vseh proizvodnih potrebščin. Optimizacija razmerja med ceno in kakovostjo: maksimalna donosnost naložbe. Glavne aplikacije: Lsdpfx Alsv Iqa Ee Noaa Reciklaža stranskih odpadkov za večlamelno obdelavo Polizdelki za pohištvo iz lesa Pakirna industrija Vrata, okvirji, podnevi in gradbeništvo Splošna tesarska dela Napreden model TVM Ø 700 je pogosto kombiniran z dodatnimi rešitvami, kot so: Elektropnevmatski omejevalniki za ponavljajoče se reze. Numerično krmiljeni omejevalniki za večjo prilagodljivost dimenzij. Optimizirano ravnanje z materiali in proizvodni tok: Podobno kot model Ø 600, polizdelki se odstranjujejo s transportnimi trakovi, odlagalnimi mizami ali valjčnimi potmi. Dodatne prednosti: Izboljšana varnost in ergonomija. Enostavno vzdrževanje in dolga življenjska doba. CURSAL dodatki za napredno prilagodljivost. Optimizacija stroškov za maksimalno donosnost naložbe. Področja uporabe za TVM Ø 700: Reciklaža stranskih odpadkov za večlamelno obdelavo Polizdelki za pohištvo iz lesa Pakirna industrija Vrata, okvirji, podnevi in gradbeništvo Splošna tesarska dela

Stanje: novo, Leto izdelave: 2025, TRSI Automatic Saws: Performance, Precision and Optimization TRSI Ø600 Push-Feed Saw – 90° Cut: Perfect for Beech Sawmills The TRSI Ø600 is an automatic optimization saw with push-feed, developed for cutting beech timber with a consistent thickness and variable width. Its modular monoblock design and Ø600 blade make it ideal for precise applications. Key Features: - Programmed and Optimized Cutting: Precise, repeatable operations or optimization to reduce waste and maximize yield. TRSI Ø700 Push-Feed Saw – 90° Cut: For Beam and Packaging Cutting The TRSI Ø700 is designed for powerful cutting of beams and packaging materials. Featuring a Ø700 blade and a robust structure, it offers high productivity both in sawmills and packaging industries. Key Features: - Programmed and Optimized Cutting: Maximizes material usage while minimizing waste. TRSI: The Customizable Solution for Every Sector TRSI is the ideal automatic saw for companies seeking speed, reliability and precision. It can be customized to your needs and is perfectly suited for various production sectors. Advanced Technology: - Advanced Software: Simple programming and process optimization. - Complete Integration: Compatible with your enterprise systems. - Remote Maintenance: Technical support available at any time. Superior Performance: Lasdpev Iqddefx Al Nsa - Ultra-precise Motion: Fast push-feed on ball screw guides for smooth and accurate cuts. - Brushless Motors: Maximum performance and reliability. - Reinforced Structure: Guarantees flawless movement without vibrations. Accessories for Maximum Productivity: - Custom Feeders: Minimize downtime. - Manual and Automatic Printers: Clear marking of semi-finished products. - Optimized Discharge Systems: For all types of processing. Rely on Cursal for Innovation and Performance With the TRSI, you achieve maximum efficiency and precision by adapting every aspect of the machine to optimize your production flow. Contact us for tailored advice and take your production to a new level of quality.

Stanje: dober (rabljeno), Leto izdelave: 2009, Vpenjalna sila: 90 t Premer vijaka: 30 mm Tip: Večdelni Pogon: Hidravlični Ljdpfx Alsy Duaao Nsaa

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: FA55, Machine overview The ATLANTA COMBIGIOTTO 90-M is a fully automatic inline packaging machine that collates containers into bundles and then packs them on a corrugated tray with film overwrap. The machine is configured for wrap + film on tray applications and operates with straight-line (inline) product infeed. It is suitable for a wide range of container formats from 0.5 L to 10 L, typically handling PET, glass, or HDPE bottles, cans, and similar rigid containers. The unit was built in 2008 and underwent a complete refurbishment in 2022. It is classified as operational. Operating mode: Automatic Infeed layout: Straight infeed (inline) Packaging: Tray pack with neutral film overwrap Format range: 0.5 L – 10 L Machine configuration: Delivered without container feeding system (to be provided by the line integrator) Year of manufacture: 2008; Refurbished: 2022 Typical process sequence: Product collation in-line; picking and forming of tray blanks around the collated bundle; application and sealing of neutral film; discharge for downstream handling. This configuration ensures robust tray stabilization with protective film overwrap, suitable for distribution and palletizing. Technical data Model: COMBIGIOTTO 90-M Brand: ATLANTA Operational status: Ready for operation Packaging configuration: Wrap + film on tray Ljdpexdnbzofx Al Njaa Film type: Neutral Tray: Available (tray packaging configuration) Machine infeed type: Straight (inline) Format capability: 0.5 L to 10 L containers Year: 2008 (refurbished 2022) Automation & Control Industrial PLC-based control system with HMI for recipe management and setpoint control (format parameters stored for repeatability). Speed control via frequency inverter/servo drives for synchronization of infeed, collation, tray wrapping, and film application. Integrated diagnostics, alarm history, and counters (shift/lot totals). Typical sensors: product presence, jam detection, film roll end, tray blank level, safety interlock status. Electrical protection class: IP54 for the electrical system and motors. Line Integration Container infeed: Not supplied with the machine. The packaging machine requires a stable, synchronized infeed from the line (accumulation/gap/divider to be supplied by the line integrator). Inline design simplifies integration with fillers, labelers, and downstream conveyor equipment. Standard interface signals (typically): machine ready, run enable, emergency stop loop, fault, upstream/downstream handshake. A detailed I/O list can be coordinated during integration. Discharge prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be specified as part of the project layout). Condition & Maintenance Overall status: Ready for operation. General overhaul completed in 2022 to restore full functionality. Recommended preventive maintenance: periodic inspection of film path and sealing units, collation guides, tray magazine mechanisms...

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: FA56, Machine Overview Automatic tray and film packer ATLANTA COMBIGIOTTO 90-M, designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product in neutral shrink film, afterwards passing the bundle through a shrink tunnel to produce stable, retail-ready packs. Ideal for beverage lines processing PET, glass or HDPE bottles. Reference No. FA56. Year of manufacture 2008, overhauled in 2022. Condition: Ready for operation. Expected output up to 25 bundles/min, depending on product and format. Operating Principle: Automatic grouping of bottles, tray forming/loading, film wrapping and consolidation in the shrink tunnel. Packaging Configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy integration with existing conveyor systems. Key Technical Data Brand / Model: ATLANTA COMBIGIOTTO 90-M Operating Mode: Automatic Infeed/Outfeed Alignment: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal Capacity: up to 25 bundles/min (depending on format/product) Year: 2008 (overhauled 2022) Condition: Ready for operation PLC: SIEMENS S7 E 300 Automation & Control Industrial PLC-controlled system with operator HMI for recipe selection, speed setpoints, and diagnostics. Inverter-driven drives for smooth acceleration and product handling. Laodpfx Aex H Thzol Nea Optoelectronic sensors for product presence, faults, and film detection. Shrink tunnel with temperature control for consistent film application. Locked access doors with safety monitoring for protected zones. Line Integration Infeed: Accepts bottles from conveyor with 90° transfer into the feeding area; integrated selection/divider functions to create pack patterns prior to tray loading. Outfeed: Discharge conveyor after shrink tunnel for connection to inspection, carton handling, or palletizing. Signals and handshakes typically include start/stop, faults, emergency stop, and speed reference. Mechanical interface and layout diagrams available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine delivered ready for operation. Preventive maintenance recommended: regular checks of film path, cutting/sealing components, tray forming kits/generators, lubrication, and wear parts of conveying systems. Performance & Versatility Suitable for a wide range of cylindrical or square bottles common in beverage production. Typical bottle pack patterns (e.g. 2×2, 3×2, 4×3, etc.), depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray adds strength and stacking stability. Consistent bundle quality through controlled film wrapping and thermo-shrinking process. Site Requirements Power supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and protective ground). Auxiliary systems: 24 V DC. Instrumentation voltages: 24 V AC – 230 V AC.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 65.031 h, Funkcionalnost: popolnoma funkcionalen, Vijačni kompresor Atlas Copco GA90 90 kW 7,5 bara 16,87 m3/min Leto izdelave: 2015 Lodpfxjy A Nwks Al Njaa Obratovalne ure: 65.031

Stanje: rabljeno, Delovna širina 350 mm Delovna dolžina 5.100 mm Prehod 210 mm Masivna hidravlična preša za nosilce Bürkle tip HS 1/90 35/510 za lepljenje lesa, nosilcev ali drugih prešnih nalog. Grelne plošče ne delujejo. Lsdpfx Aey Eryyol Njaa Vključeni skoraj novi nadomestni cilindri.

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Ledpfx Alsfh Tmmj Njaa Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: novo, DMC SD 90 RCS 135 Type “C-Plus” Technical Specifications Usable Working Width: 1350 mm Min./Max. Working Height (with fixed table): 4 – 200 mm Abrasive Belts: 1,370 x 2,620 mm Feed Speed: 3.5–18 m/min Working Units: • “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed • 1st Position: “RA” angled ribbed steel contact roller D=250 mm Lsdpfx Alsd E Ixze Nsaa • 2nd Position: COMBI with rubber-coated sanding roller D=175 mm, 65 Shore • Floating pressure shoe at 1st position with pneumatic adjustment • 2 grooved rubber-coated pressure rollers at 2nd and 3rd positions • Oscillating blow-off device at 1st and 2nd units • Workpiece cleaning unit with rotating air nozzles Drive: • Motor 1st unit: 18.5 kW • Motor 2nd unit with inverter: 15 kW Table: • Fixed table, working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and conveyor belt, 50 Shore • Vacuum table with integrated electric fan 4 kW in machine base • Variable conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit “Pro-Sand” • 10.4" touch screen display • Door with inspection window on operator side for machines with 2 working units • LED interior lighting Note on used machines: • Subject to technical changes and prior sale. • Quoted prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines on location. • Special agreements are only possible in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Automatic edging line for sawn timber Complete automatic edging plant for sawn timber, manufactured by EWD Esterer (Germany), a brand renowned for reliability and accuracy in the wood processing industry. Model: DK 90 T2L2 Year: 1997 - CE marked The line consists of an integrated system that ensures a continuous and automated flow of material, from infeed to final outfeed. The process starts with a horizontal belt conveyor, followed by a board singulation system to ensure proper material alignment. There is an end trimming station and an automatic feeder that delivers boards directly to the EWD/Esterer edger, model DK 90 T2L2. Lajdpjyz Sarefx Al Nja At the outfeed, the material is handled via an offcut separation system and then conveyed onto a roller conveyor approximately 15 meters long, equipped with two side ejectors (right and left) that allow automatic selection between short material (up to 250 cm) and long material (up to 300 cm). Machine condition: Operational plant, immediately available and currently visible in production. Viewing and testing possible by appointment.

Stanje: dober (rabljeno), Leto izdelave: 1998, Ref. št.: 10583 Proizvajalec: MTE Tip: BF 4200 Leto izdelave: 1998 Vrsta krmiljenja: CNC Krmiljenje: Heidenhain TNC 426 Lokacija skladišča: Halberstadt Država izvora: Nemčija X-hod: 4000 mm Y-hod: 1200 mm Z-hod: 1500 mm Število vrtljajev: 2.500 o/min Hitri pomik X/Y/Z: 400 m/min Vpenjalna površina mize (D x Š): 4200 x 1000 mm Menjalec orodij: 40 Največja obremenitev mize: 13.000 kg Vpenjalo orodja: SK 50 Teža: 20 t Število T-utorov: 7 kos Širina T-utorov: 22 mm Razdalja med utori: 140 mm Dodatne informacije: - Heidenhain ročni kolesni upravljalnik HR410 Laodpjy Ed Ipofx Al Noa - 3D skener, infrardeč - Kroglično vreteno na oseh Z in Y je vpeto in leži na kombiniranih radialno/aksialnih valjčnih ležajih in radialnih krogličnih ležajih s togostjo 250 N/qm. Stroj je mogoče videti pod napetostjo.

Stanje: rabljeno, največja dovoljena obremenitev: 2.570 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 7.960 mm, širina tovornega prostora: 2.422 mm, skupna širina: 2.422 mm, skupna višina: 690 mm, !?Der Standort des Anhängers ist Eggenfelden?! Besichtigung / Abholung nur nach vorheriger Terminvereinbarung. Verkauf erfolgt im Auftrag des Eigentümers Kaufvertrag zwischen Eigentümer und Käufer Lsdpfx Asy Al Ifol Nsaa Gepflegter, wenig benutzter Autoanhänger Fabrikat JUZJADE Typ R2 Variante 14N mit 3500 kg zulässigem Gesamtgewicht. Achsabstand 750mm, .... zählt führerscheintechnisch als eine Achse Leergewicht 930 kg Gesamtlänge 9490 mm Breite 2422mm Höhe 690 mm Achsabstand 750mm (d.h. Tandemachse da < 1m) Achsbreite 2100 mm Länge Ladefläche 7960 mm Breite Ladefläche 2422 mm Mit Überfahrrampen zum Zugfahrzeug Leergewicht 930kg Bereifung / Felgen: 195/50 R 13C 103M - 6Jx13 ET30 Trotz sorgfältiger Bearbeitung können Eingabe- und Datenübermittlungsfehler bei der Fahrzeugbeschreibung inkl. Bildern vorkommen. Irrtümer und Zwischenverkauf vorbehalten.

Stanje: rabljeno, Leto izdelave: 2008, Transnorm Belt Curve Conveyor Belt Curve 90°-800-700 IR900 Right-hand RA2080 Technical Data: Manufacturer: Transnorm Condition: Good (used) Conveying angle: 90° Nominal/External width (NB): 800 mm Belt width (GB): 700 mm Inner radius (IR): 900 mm Height (BH): 210 mm Motor height (MH): 450 mm Motor type: SEW geared motor, SA37/T DT71D4/TH Electrical data: 380-500 V, 0.37 kW Conveying speed: 1st gear 0.67 m/s, 2nd gear 0.25 m/s, 1st gear 0.33 m/s, or 1st gear 0.83 m/s Scope of delivery: without supports (available on request) Optional: Supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional consultation please feel free to contact us. Contact us by phone or email. We would be pleased to assist you with the planning and implementation of your projects. We look forward to hearing from you. Lasdpfsn Tpvgex Al Nja Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2005, Dematic Roller Curve Left 90°-500-440 IR795 RA2351 Manufacturer: Dematic Direction of travel: 90° left-running Roller width (RB): 440 mm, tapered, plastic-coated Nominal/outer width (NB): 500 mm Internal radius (IR): 795 mm 3x 300-500V Frame height: 132 mm Overall height including motor: 275 mm Geared motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveying speed: 0.6 m/s Optionally available: Supports Side guides Frequency inverter for stepless speed control Lajdpfovu Ihyjx Al Nea Price excl. VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, please feel free to contact us. Get in touch with us by phone or email. We are happy to support you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2015, Transnorm Belt Curve Conveyor 90°-800-700 IR900 LH RA2116 Technical Data: Manufacturer: Transnorm Condition: good (used) Conveying angle: 90° Nominal/outer width (NB): 800 mm Belt width (GB): 700 mm Inner radius (IR): 900 mm Conveyor height (BH): 210 mm Motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical data: 380-500 V, 0.37 kW Laodpfxeq Uap Ro Al Noa Conveying speed: 0.67 m/s Scope of delivery: without supports (please enquire if required) Optional: - Supports - Side guides - Frequency converter for stepless speed regulation Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For customized, professional consultation, feel free to contact us. Contact us by phone or email. We are happy to assist you in the planning and realization of your projects. We look forward to hearing from you. Kind regards Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics