Avtomatska žaga za rezanje aluminija/PVC

Tronzadoras MG GAA-350-90+CNC+TR12

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET – OFFER ✅ Scope of Delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard-equipped with Flow Control, Thermocontrol, and coolant filter. The chiller will automatically shut down if the water cooling fails or overheats to protect the hosepack. These features alone cost approx. €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion, the most sensible feed case; wire is safely stored in a closed case. ➤ Fronius Long Intermediate Hosepack – Each unit is supplied with a 5-meter connection hosepack between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach spots! The hosepack is neatly placed on a hook attached to the side of the machine. (Hooks are custom-made by us) ➤ Fronius Large Trolley – Probably the best trolley with cylinder holder on the market. ➤ Binzel Hosepack – With up/down amperage control on the torch. ➤ Earth Cable 3-4m ➤ New Messer Pressure Regulator ➤ New Drum Adapter for large wire reels This unit can weld almost all materials, including aluminium, steel, and stainless (V2A). It has pulse wire programs and is suitable for MIG brazing (CuSi), commonly used in bodywork and sheet metal workshops. Additional options available at extra cost E.g. Fronius Aw4000/Aw5000 Job Master hosepack (torch display) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, Vienna 1230! ✔ Itedpfowbil Sjx Al Nsf Insured pallet shipping is no problem! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the units? For your information, we purchase nearly-new used units, fully strip and inspect them, replace wear parts as needed, and only release them for sale after successful test welding. All machines are clean and have no burn or melt holes in the displays, nor are they covered in burn marks or dents! You buy from us an item that is ⭐worth seeing and not worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community EU supply, we can issue a net (tax-free) invoice. ►►►Which payment methods do you offer? Advance bank transfer or cash upon personal collection. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always keep 60-80 units in stock – exclusively Fronius, no other brands! We are experts with these machines and never sell anything we do not know inside and out.

Stanje: rabljeno, Leto izdelave: 2009, skupna dolžina: 5.500 mm, skupna širina: 2.300 mm, skupna višina: 2.900 mm, Poids : 18 700 kg Prix : Sur demande - Année de construction : 2009 - Documentation disponible : Non - Marquage CE : Oui - Certificat CE : Non - Numéro de série : 83261 - Commande : CNC - Marque du système de commande : HACO - Type de système de commande : BC59T Graphics - Nombre d’axes [pcs] : 6 : Y1+Y2+X+R+Z1+Z2 - Force de pressage [tonnes] : 250 - Largeur de travail max. [mm] : 4 300 Itodsxrl Hdopfx Al Nof - Distance entre montants [mm] : 3 800 - Profondeur butée arrière [mm] : 1 000 - Système de bombage : Commande CNC - Porte-poinçon : À changement rapide - Options : Protection anti-pincement - Dimensions de transport : 5 500 mm x 2 300 mm x 2 900 mm (L x l x h) - Poids de transport [kg] : 18 700 kg - Nombre de colis de transport [pcs] : 1 Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tous les équipements industriels Lukas van Rossum

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical parameters specified in the manual, on workpieces made of: plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical worktable allows for easy loading and unloading of processed parts and minimises the maximum dimensions of the machine to the essential minimum. Tool changing using a 10-position side-mounted tool magazine enables a wide range of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speed (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp – ER32 Drilling head unit T3: Itjdpfsmzbr Ssx Al Njf Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Iodpfxefg Rlcj Al Njtf Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, delovna širina: 3.050 mm, kot rezanja (min.): 0,5 °, rezalni kot (maks.): 3 °, najv. debelina pločevine: 6 mm, zadnji prislon: 750 mm, vhodna napetost: 380 V, skupna masa: 4.500 kg, Hidravlične škarje za vertikalno rezanje Znamka: HACO Model: TS 306 Proizvajalec/prodajalec: Casanova Trofazna napetost 380V Leto: 2000 Tip: Vertikalni rez (nagib rezila) Dolžina reza: 3050 mm Iedpfx Alsxgdlno Nstf Kapaciteta: 6 mm Nastavitev kota reza: 0,5-3 stopinje Število pritisnih elementov: 13 Udarec na minuto: 8-14 Kvadratno roko: 1000 mm Zadnja letev: 750 mm Motorizirana zadnja letev z ročnim volanom za fino nastavitev Motor: 7,5 kW Teža: 4500 kg

Stanje: zelo dobro (rabljeno),

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Itsdpfx Alsfx Hv Hs Njf Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: dober (rabljeno), Brand: Ercolina Model: CE40H3 Year of manufacture: 2006 Hydraulically driven Roll diameter: Ø 165 mm Shaft diameter: Ø 40 mm Tube capacity (thin wall): Ø 70 x 1.5 mm, min. Ø 700 mm Tube capacity (thick wall): Ø 2" x 3.2 mm, min. Ø 450 mm Angle profile capacity: 50 x 50 x 6 mm, min. Ø 400 mm Flat bar capacity: 50 x 10 mm, min. Ø 250 mm Flat bar capacity (hard edge): 100 x 15 mm, min. Ø 250 mm Box section capacity: 50 x 50 x 3 mm, min. Ø 500 mm Shaft capacity: Ø 35 mm, min. Ø 250 mm Motor power: 1.85 kW Bending speed: 10 rpm Iedpfxjw Hx Tvs Al Njtf

Stanje: dober (rabljeno), Leto izdelave: 1992, Dvoranski žerjav, žerjav, električni vitel z jeklenico, dvižni mehanizem, motorni jekleni vitel, motorni vitel, koloturnik, vlečni vitel, škripčevje -Proizvajalec: Stahl, žerjavni voz z električnim vitlom z jeklenico -Žerjavni voz: Tip GO 24 20 16 Itsdpfx Ael Tuvdel Nsf -Hitrost vožnje: 20 m/min -Razmik med kolesi: 800 mm -Jekleni vitel: Tip AS 2010 -Vlečna sila: 1000 kg / nosilnost 4000 kg -Hitrost bobna: 16 m/min / dvižna hitrost 4 m/min -Transportne mere: 1250/1180/V400 mm -Lastna masa: 356 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, trajanje garancije: 3 meseci, vrsta hlajenja: voda, varilni tok pri 60% delovnega cikla: 500 A, varilni tok pri 100% delovnem ciklu: 400 A, For sale: Miller PipeWorx 400 Itsdex Rppcopfx Al Njf 565 AMP (500A @ 60%, 400A @ 100%) 380 Volt Year: 2013 Water-cooled Pulse function RMD process Program memory Electrode option Suitable for welding steel and stainless steel Completely overhauled, tested, and serviced. Test welding possible Includes: 1.0-1.2mm feed rollers, 2x PRO5000 welding torches, ground cables, gas hose, transport trolley, and 3 months warranty. Test welding is possible. A video of the machine in welding operation can be provided upon request. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries within and outside Europe using Euro pallets per shipment. All our machines have been serviced and are 100% ready for operation, unless otherwise stated. The pictures above show the actual machine. We can also offer other machine types, such as: Used, New, Mig, Mag, CO2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business directly with Cjays Lastechniek and never with third parties.