Ima Biesse Homag Costa Barberan Giben Co Popolna Tovarno Pohištva Omare nakup rabljenega (34.979)

Stanje: generalkompletno obnovljen (rabljeno), Single-sided edge processing and edge banding machine (left-hand side) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed rate (adjustable) m/min: 6 - 30 EDGE PROCESSING: Jointing unit with CNC control 08.376 (2 x 4.5 kW) Spraying unit (for liquid release agent) EDGE BANDING SECTION: Lamps for panel edge heating Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for roll material (compartment N° 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0-25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° + spraying unit (for sliding agent) Contour milling unit (for fine trimming) CNC controlled 08.348 (2 x 0.66 kW) Multi-profile scrapers (CNC controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Universal milling unit for grooving, rebating, and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edges WI (4 x 0.75 kW) Ncjdpfx Aocr T N Djgxsr

Stanje: zelo dobro (rabljeno), DVOJSTRANA FORMATNA I MAŠINA ZA NANOŠENJE IVICA – Prva (1.) mašina u liniji Debljina ivice u roli (min/max) mm 0,3 / 3 Debljina ploče (min/max) mm 8 / 45 (60) Radna širina (min/max) mm 250 / 1300 Upravljanje / softver ICOS Open (Windows baza) Brzina pomeranja (podesiva) m/min 10 - 50 (Master & Slave) Zaštitne i zvučno izolovane kabine FORMATIRANJE (za svaku stranu): Agregat za obradu ivica (2 x Kw 6,6) Maks. 35 m/min Agregat za pripremu ivica 75.186 (1 x Kw 4,4) OBRADA IVICA (za svaku stranu): Lepilni agregat (P.U.R. lepak + pretopni uređaj + Hot Melt lepak) VTG 3-24 + 283.201 + 283.19 + 283.203 Pritisna zona Magacin ivica za rolne (pretinac br. 24) Predfrézerski/frézerski agregat 08.055 (2 x Kw 1) 0°-30° (30 m/min) Predfrézerski/frézerski agregat 08.055 (2 x Kw 1) 0°-30° (30 m/min) Agregat sa profilnom vučnom nožem 08.515 Agregat sa ravnom vučnom nožem 08.521 Agregat za poliranje 08.617-2 (2 x Kw 0,18) 3 x standardni frézerski agregati za nutovanje/pravljenje falcova (2 levo + 1 desno) 08.190 (Kw 4,5x3) 90°/180°/270° Ncedpfx Agsxggthjxor

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a processing line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/software: ICOS Open (Windows based) Without transfer rail (Master & Slave systems) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins "Hopper" (panels fall directly onto the motorized caterpillar chains) Cam distance (mm): 270 FORMAT PROCESSING (for each side): Spraying unit (for liquid nonstick agent) Pre-milling cutter 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Free space EDGE PROCESSING (for each side): Gluing unit (hot melt glue + pre-melter) 04.1570 + 283.201 Pressure zone + edge magazine for rolls (compartment no.) 6 Ncjdjum Untspfx Agxsr End trimming unit 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Milling unit 08.055 (2 x 0.66 kW) 30 m/min Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: zelo dobro (rabljeno), KOMPLETNE DVOSTRANE MAŠINE ZA FORMATIRANJE I NANOŠENJE KANT TRAKE, sačinjene od: OZ2050A) Stanica za ubacivanje 'MEINERT' model P 415 D/B - L, dvostruka stanica za prihvat. Sa centralno motorizovanim rolno-stolom. Sa dve motorizovane rolne postavljene na podu za dopremu složenih ploča do stanice za ubacivanje. OZ2050B) Prva dvostrana mašina za formatiranje i lepljenje kant trake 'IMA' model Combima / II / 440 / A / R3 OZ2050C) Povezani rolni sto 'IMA' model IDK L/Q sa obrtanjem (od uzdužnog ka poprečnom smeru) OZ2050D) Druga dvostrana mašina za formatiranje i lepljenje kant trake 'IMA' model Combima / II / 590 / B / R3 OZ2050E) Povezani rolni sto 'IMA' model IDK Q/L sa uređajem za obrtanje (od poprečnog ka uzdužnom smeru) sa dvostrukim konus sistemom Ncedpjxftt Eefx Agxer OZ2050F) Dvostrana stanica za skidanje sa palete 'MEINERT' model P 415 D/S - L, kompletna sa centralno motorizovanom rolnom trakom. Sa dve motorizovane rolne trake.

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edgebanding material (coils) thickness (min/max) mm: 0.3 / 3 – Edgeband thickness in strips / tapes max mm: 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Ncodexggzlepfx Agxor Control/Software: ICOS Open (Windows based) Feed speed (adjustable) m/min: 10 - 50 (Master & Slave) Protective and noise reduction cabins FORMATTING SECTION (for each side): Pre-milling cutter (pre-milling) 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Max 35 m/min Jointing milling unit 75.186 (1 x 4.4 kW) EDGEBANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) VTG 3-24 + 283.203 Pressure zone + edge magazine for rolls (slot no. 24) End trimming unit 08.42 / 30 / B (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling/milling unit 08.055 (2 x 1 kW) 0°-30° (30 m/min) Multifunctional unit (radius & contour milling unit) MFA 08.342 (2x0.66 kW) SERVO Max 20m/min OPTIONAL: KFA 30 Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.604 (0.25 kW x 4) 2 x standard milling units for grooving/rabbetting (1x left + 1x right) 08.190 (4.5 kW x2) 90°/180°/270°

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness for rolls (min/max) mm: 0.4 / 3 Edge thickness for strip veneer (max) mm: 1.3 Panel thickness (min/max) mm: 10 / 45 Working width (min/max) mm: approx. 244 / 2300 Control/Software: ICOS Open Feed speed (m/min): 8 - 40 No transmission bar (Master & Slave systems) Safety and noise protection enclosure Retractable alignment stops, distance (mm): 270 Ncedpfx Agjfi Tkvoxjr FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. adhesive + premelter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End-trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°-30° Multifunction unit (radius milling and profile trimming) MFA 08.342 (0.66 kW x 2), max 25 m/min Profile trimming unit (copying) 08.465 (0.18 kW x 4), max 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free bay

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINES – First (1st) machine in line Edge thickness from coil (min/max) mm Edge thickness in strips (min/max) mm Panel thickness (min/max) mm 12 - 60 Nodpfxsfi Tkgs Agxjcr Working width (min/max) mm 1300 Control/software ICOS open Feed speed (adjustable) m/min 9 - 45 No transfer bar (master & slave systems) Pressure belt driven by V-belt FORMATTING UNIT (for each side): Jointing/milling unit 75.30 (kW 6.6 x 1) EDGE-BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1569 + 283.205 Pressure rollers (turret) for straight and softforming edges mm 1,050 Edge magazine for coils (number of slots) 6 End trimming unit 08.42 (kW 0.2 x 2) 40 m/min Pre-milling unit 08.055 (kW 0.66 x 2) 0°-30° Milling unit 08.0582 (kW 0.66 x 2) 0°-30° Scraper unit 08.50 Buffing unit 08.617-2 (kW 0.18 x 2)

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control unit: ICOS Open Feed speed m/min (adjustable): 16 - 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable stop ruler, CNC controlled Jointing unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) VTG + 283.203 Edge magazine for rolls (number of compartments): 6 End trimming unit 08.42/30/B (Kw 0.2 x 2) max 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2), 4 profiles Multifunctional unit (radius and contour milling) KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Njdpfed Scydox Agxscr Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 08.190 (Kw 4.5 x 1) 90°/180°/270° CNC

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable) 6 - 30 No transmission bar (Master & Slave systems) Top pressure driven by V-belt Sprayer unit (for liquid anti-stick agent) Jointing milling unit 08.376 (4.5 kW x2) Free position Ncedped Rcigsfx Agxor Glue application unit (hot melt glue) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 2 End trimming unit 08.42 (0.66 kW x 2) 0°-25° Milling unit 08.055 (1 kW x 2) 0°-30° Multifunctional unit (radius and profile milling unit) 08.342 (0.66 kW x 2) Profile scraper unit 08.519 Flat scraper unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612 Free position (for grooving/rabbetting unit)

Stanje: kot nova (razstavni stroj), SINGLE-SIDED EDGE BANDER (LEFT) Edge thickness on rolls (min/max) mm 0.3 / 3 – in lippings/strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Pressure belt driven by V-belt Spray unit (for liquid non-stick) Adjustable fence, CNC controlled Ncodpfx Agjgbug Nsxsr Panel feeding system 700.101 (mm 500 x 500) Jointing milling unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo-motor), adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments No.) 6 Linear end trimming unit 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Stanje: generalkompletno obnovljen (rabljeno), PC control (Power Control) Software No. 2 motorised through-feed conveyor belts No. 2 horizontal drilling supports (digital display of the position data for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Maximum working width (mm): 3000 Minimum working width (mm): 250 No. 6 lower vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower drilling supports No. 2 upper vertical drilling supports (digital display of the position data for axes) Ncsdpfovhcbzex Agxjr No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the upper drilling supports No. 6 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 50 / 60 (approx.)

Stanje: zelo dobro (rabljeno), Rollenanlage für LACKIERUNG und OBERFLÄCHENBEARBEITUNG (UV), maximale Arbeitsbreite 1.300 mm. Bestehend aus: 01) Nr. J05012) Schleifmaschine "COSTA LEVIGATRICI" Modell SN TR LFT 3 TT 1350 02) Nr. Y11034) Walzenauftragsmaschine "SORBINI by CEFLA" Modell SMARTCOATER MF-EVO 03) Nr. Y11036) UV-Trockner (1 Lampe) "CEFLA" Modell UV 2000 M1 - TT 2000 04) Nr. Y11037) Walzenauftragsmaschine "SORBINI by CEFLA" Modell SMARTCOATER M-1 AN 05) Nr. Y11041) UV-Trockner (2 Lampen) "CEFLA" Modell UV-R M20 06) Nr. Y11061) Schleifmaschine "COSTA LEVIGATRICI" Modell SH3 TR TTTTR 1350 07) Nr. Y11042) Walzenauftragsmaschine "SORBINI by CEFLA" Modell SMARTCOATER MF-EVO Ncjdohyty Aspfx Agxer 08) Nr. Y11039) UV-Trockner (2 Lampen) "CEFLA" Modell UV-R M2 09) Nr. Y11035) Walzenauftragsmaschine "BURKLE" Modell RCL-M 1300 (e.a.s.y. Coater) 10) Nr. Y11043) UV-Trockner (3 Lampen) "CEFLA" Modell UV-R M3

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: toothed belt driven Adjustable fence: CNC controlled Jointing unit with CNC-controlled 08.376 (kW 4.5 x 2) Lamps for workpiece edge heating Edging station (Hot Melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartment No.): 1 End trimming unit 08.42 (kW 0.66 x 2), max 30 m/min, 0°-25° Milling unit 08.055 (kW 1.85 x 2) 0°-30° Spray unit (for sliding liquid) Contour milling unit (for fine trimming) CNC controlled 08.348 (kW 0.66 x 2) 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Njdpoidqphsfx Agxecr Spray unit (for polishing liquid) Buffing unit 08.612-2 (kW 0.25 x 2) Universal milling unit for grooving/rebating and profiling 08.183 (kW 3 x 1)

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20 Nodpfx Aoivawpjgxocr

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Ncodpfx Asifnzdsgxjr Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: 1000021515, Funkcionalnost: popolnoma funkcionalen, moč: 21,5 kW (29,23 KM), skupna masa: 330 kg, The company DDG INSOLVENCY I.P.U.R.L., headquartered in Cluj-Napoca, str. Septimiu Albini, no. 115, Cluj county, VAT no. RO27987796, registration no.: 2A0522, through the insolvency practitioner Godorogea Daniel-Lucian in his capacity as judicial liquidator for ELEMENTO MOBILI S.R.L. - in bankruptcy (în faliment, in bankruptcy, en faillite), with registered office in Dej, str. Dumbrava Roșie, no. 6, ground floor, apt. 1, Cluj county, registered with the Trade Registry attached to Cluj Tribunal under no. J12/2389/2016, company registration number 36225390, appointed by Civil Judgement no. 1278 dated 03.07.2025 issued by Cluj Specialized Tribunal in file no. 442/1285/2025, is organizing a public auction with ascending bids for the sale of the assets identified in this announcement. The first auction will take place on 11.02.2026 at 15:00 at the headquarters of DDG Insolvency I.P.U.R.L., Cluj-Napoca, str. Septimiu Albini, no. 115, Cluj county. Should the asset not be awarded, the auction will be repeated on 18.02.2026, 25.02.2026, 04.03.2026, 11.03.2026, 18.03.2026, under the same conditions and at the same time. Ncsdpjyfgxpjfx Agxjr For asset inspection, the liquidator will set a viewing day on 04.02.2026 between 10:00-14:00. Interested parties are invited to contact the judicial liquidator and indicate their intention to participate prior to the scheduled viewing date. Upon awarding, the judicial liquidator will issue a tax invoice for the value of the assets awarded. Conversion into RON will be carried out at the issue date of the tax invoice, using the exchange rate established by the National Bank of Romania (BNR) for that day. The bidding increment shall be 5% of the starting price. The auction documentation for participation will be prepared by the judicial liquidator in accordance with standard practices in the field, will include the regulations for participation, and will be provided by the insolvency practitioner at the price of 500 RON + VAT for assets up to 5,000 euros, and 1,000 RON + VAT for assets over 5,000 euros. The documentation may be purchased at the liquidator's office or by phone and will be sent to the participant by e-mail. The participation guarantee will be 10% of the starting price. This, along with the registration documents, must be submitted at least 24 hours prior to the auction at the judicial liquidator's office. The participation guarantee will be deducted from the price for the winning bidder and will be refunded to non-winning participants. In the case of identical final bids, the winning bidder will be the one committed to paying the full price in the shortest time. The price payment term is 5 working days from the award date. If the remainder of the price is not paid, the awarded bidder loses the advance paid as a guarantee and will no longer be able to participate in future organized auctions.

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 39.359 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-201-04-0605, Opis glavne opreme: Vpenjalna miza z matriks aluminijasto konstrukcijo Vakuumski sistem pripravljen za nesting tehnologijo 1000 m³/h Nadzorna plošča Power Control s PC85 Glavno vreteno 15 kW s senzorjem vibracij C-os z agregatnim vmesnikom Vmesnik za agregat FLEX-5 Menjalnik orodij tipa disk z 10 mesti Vrtalna enota: 13 vreten – 9 navpičnih in 2+2 vodoravni Programski paket za pisarniški računalnik Nodpsyucyzjfx Agxscr Programska oprema WoodWOP Tools Največja hitrost pozicioniranja: 80 m/min v smereh X in Y (vektorska hitrost X/Y = 113 m/min) / 30 m/min v smeri Z

Stanje: rabljeno, Leto izdelave: 2017, Osi Plus numerical control QUICK OPTI software for pattern cutting optimization directly at the machine, OPTIPLANNING cutting optimization software PROFESSIONAL version, barcode label printer - OS-Labelling add-on key for office programming software, electrical cabinet climate control, cutting length 4400 mm, cutting width 4300 mm, blade protrusion 90 mm, manual loading of the front panel, integrated lateral aligner in blade carriage, no. 1 fixed front Bakelite table with air cushion system for unloading panels (2050 x 850 mm), no. 3 adjustable front Bakelite tables with air cushion system for unloading panels (2050 x 650 mm), main saw unit (max. blade diameter / power) 355 mm / 11 kW, scoring unit (max. blade diameter / power) 200 mm / 2.2 kW, adjustable blade carriage speed, sliding carriage with 9 grippers, blade carriage speed 120 m/min, Twin Pusher 1.2 system with 1 additional gripper on the pusher carriage (position 570 mm) for simultaneous cutting of different patterns. TECHNICAL DETAILS NEED TO BE VERIFIED. Ncsdpfevtbzkox Agxer

Stanje: rabljeno, Leto izdelave: 2017, Osi Plus numerical control, QUICK OPTI software for pattern cutting optimization directly at the machine, OPTIPLANNING pattern optimization software PROFESSIONAL version, barcode label printer - OS-Labelling, electrical cabinet air conditioning, cutting length 4400 mm, cutting width 4300 mm, blade extension 75 mm, manual front panel loading, integrated lateral aligner in blade carriage, no. 1 fixed front Bakelite table with air cushion system for unloading panels (2050 x 850 mm), no. 3 adjustable front Bakelite tables with air cushion system for unloading panels (2050 x 650 mm), main saw blade assembly (max. blade diameter / power) 355 mm / 7.5 kW, scoring saw unit (max. blade diameter / power) 200 mm / 2.2 kW, adjustable carriage speed, pusher carriage with 10 clamps, saw carriage speed 1-120 m/min, pusher speed 60 m/min, Twin Pusher 1.2 system with 1 additional gripper on pusher carriage (position 570 mm) for simultaneously executing different patterns, TECHNICAL DETAILS TO BE VERIFIED Nedpfx Agsv Amx Texscr

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), I am selling a Biesse line consisting of: COMIL Insider dowel line – Drilling, Milling, Grooving, Dowel Insertion, Glue Application, Accessory Insertion – production line Year of manufacture: 1999-2001. The machines can also be sold separately. Vibration feeder and motorised conveyors included in the offer. Njdpfx Asd Iv H Rsgxjcr For more photos and details, please send an inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, I am selling a CNC dowel boring machine with dowel insertion unit BIESSE COMIL INSIDER KTC, year of manufacture 2002. Ncodpot N Rixjfx Agxsr - 2 pcs. CNC boring heads from the sides - 1 pc. glue injection head - 3 pcs. 3Master vibratory dowel insertion units Part of a Biesse line consisting of: COMIL Insider dowel - milling - grooving - dowel insertion - glue application - accessory installation - line Years of manufacture: 1999-2001 It is possible to sell the machines separately. Vibratory feeders and motorized conveyors included in the offer. For more photos and details, please send an enquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, I am selling a CNC dowel boring machine with dowel insertion unit BIESSE COMIL INSIDER KT2, year of manufacture 1999. - 2 pcs. CNC boring heads from above - 1 pc. grooving saw - 3 pcs. 3Master vibratory dowel insertion units Nedpfjt N Hmmox Agxecr This is part of a Biesse production line consisting of: COMIL Insider dowel - milling - grooving - dowel insertion - glue application - accessory application - line Year of manufacture 1999-2001. It is possible to sell the machines separately. Vibration feeders and motorised conveyors are included in the contract. For more photos and details, please send an inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, I am selling a CNC dowel drilling machine with dowel insertion unit BIESSE COMIL INSIDER KT2, year of manufacture 2002. - 2 pcs. CNC drilling heads from above. - 1 pc. grooving saw Nsdpfet N Rkvjx Agxscr - 2 pcs. SARG vibration dowel insertion units - 1 pc. vacuum underpressure pump This is part of a Biesse line consisting of: COMIL Insider dowel insertion - milling - grooving - dowel insertion - glue application - accessory application - line Year of manufacture 1999-2001. It is possible to sell the machines separately. Vibration dispensers and motorized conveyors are included in the offer. For more photos and details, please send an inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, I am selling a CNC accessory insertion machine with glue injection, BIESSE COMIL INSIDER IT2G, year of manufacture 2001. Includes: - 2 pcs. CNC drawer runner insertion units from above - 6 pcs. glue injection heads Njdpfst N N Aqox Agxocr - 1 pc. vibration accessory insertion unit This is part of a Biesse production line consisting of: COMIL Insider dowel drilling – milling – grooving – dowel insertion – glue injection – accessory insertion – complete line Year of manufacture: 1999–2001. It is possible to sell the machines separately. Vibration dispenser and motorized conveyor included in the delivery. For more photos and details, please send us your enquiry.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, obratovalne ure: 33.000 h, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 25 m/min, model krmilnika: Power Control PC22, delovna višina: 950 mm, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width with workpiece thickness of 22 mm: 55 mm Minimum working width with workpiece thickness of 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edging material, strips max.: 0.4 - 20 mm Edge cross-section, strips max.: 900 mm² Edging material, roll: 0.3 - 3 mm Maximum edge cross-section for PVC: 135 mm² Maximum edge cross-section for veneer: 100 mm² Maximum roll diameter: 830 mm MACHINE DETAILS Control: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine base for mounting processing units Workpiece support with roller rail, extendable by approx. 800 mm Glue roller drive when feed is stopped Glue pot lifting mechanism when feed is stopped Workpiece-actuated glue pot clamping Automatically adjustable infeed fence Pneumatically controlled infeed guard Feed unit with 2 rollers Infeed extension 500 mm Automatic pressure zone adjustment Sliding carriage Pre-installed Boomerang ZHR05 return system Workpiece support in extended scissor design Nsdpsyc Sr Aofx Agxocr Operating data acquisition Electric height adjustment Fixed stop side on the left Workpiece transport device Top pressure Separating agent spraying unit Jointing cutter unit, 2 x 3 kW Glue application unit A20 Basic for roll material up to 3 mm and strip material up to 20 mm, with melt unit, granulate container and quick-change system End trimming unit, 2 x 0.8 kW, with pneumatic adjustment Lubricant spraying unit Pre-milling unit 1.5 kW, pneumatically adjustable Contouring milling unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with infinitely variable axis Multi trimming unit MN21, automatic Finishing unit FA11, with trimming unit, cleaning agent application and buffing unit, pneumatically adjustable Noise protection Space for additional processing units Note: The machine is sold without working tools. Container loading and sea packaging are not possible by the seller.