Homag Procesor Poti nakup rabljenega (724)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Working height: 900 mm Working width: 1,350 mm Abrasive belt exchange side: left Workpiece thickness: 3 – 160 mm Frequency-controlled feed speed: 4 – 20 m/min Abrasive belt dimensions: 2,620 x 1,350 – 1,380 mm Adjustable abrasive belt blow-off device, 5-stage adjustable WRD WORKPIECE CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE CONTROL TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM After activating the program, the machine automatically adjusts to 10 mm workpiece thickness and the blow-off rotors are activated. After complete cleaning of the feed belt, the machine returns to the initial setting. AAT EXTRACTION SLIDE VALVE CONTROL Control of extraction slide valves via the terminal (24 Volt DC, slide valves not included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PC Emergency power supply for the abrasive belt oscillation in case of power failure Configuration consists of: SANDTEQ W-700, PROFI SWB735/RRE – bottom sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. The machine is prepared to accommodate up to two auxiliary units, such as cleaning brushes, finishing or structuring brushes, and rotating cleaning nozzles. Redpfxjyw Ndmo Agtst Units: I. R-UNIT Sanding unit with automatically adjustable contact roller, profiled steel roller, 240 mm diameter, with grit compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation II. R-UNIT Sanding unit with automatically adjustable contact roller, rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grit compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E-UNIT Sanding unit prepared for a pressure beam - Automatic locking of the sanding units for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation - Protected storage on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing workpiece edge - Various sanding inserts, 80 mm wide with different felt hardness grades Machine dimensions L x W x H: 3,900 x 2,100 x 2,000 mm Machine weight approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, with the addition of: FBM FINISHING BRUSH Brush unit with finishing brush Brush material: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions L x W x H: 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight approx. 6,500 kg

Stanje: rabljeno, Leto izdelave: 2007, skupna višina: 1.200 mm, skupna dolžina: 3.600 mm, skupna širina: 1.480 mm, - Machine available from: 2025-12-15 - Year of manufacture: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units: 8 - └ 1st unit type: Pre-milling unit - Tools included: Yes - └ 2nd unit type: Glue application unit - └ 3rd unit type: Pressure rollers - Tools included: Yes - └ 4th unit type: End trimming unit - Tools included: Yes - └ 5th unit type: Coarse milling unit - Tools included: Yes - └ 6th unit type: Radius scraper unit - Tools included: Yes - └ 7th unit type: Flat scraper unit - Tools included: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Power consumption [A]: 50 Rodpfex Ei Syjx Agtst - Transport dimensions: 3600mm x 1480mm x 1200mm (L x W x H) - Transport packages: 4 Financial information VAT: The listed price is plus VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2008, skupna višina: 1.800 mm, skupna dolžina: 10.000 mm, skupna širina: 2.200 mm, Weight: 5,500 kg - Year of manufacture: 2008 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units: 8 - 1st unit type: Pre-milling unit - 2nd unit type: Glue application unit - 3rd unit type: End trimming unit - 4th unit type: Rough trimming unit - 5th unit type: Rough trimming unit - 6th unit type: Radius scraping unit - 7th unit type: Flat scraping unit - 8th unit type: Brushing unit - Voltage [V]: 400 - Power consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 10,000 mm x 2,200 mm x 1,800 mm (L x W x H) - Transport weight [kg]: 5,500 kg - Number of transport packages: 3 Financial information: VAT: The indicated price is exclusive of VAT. Rodpfx Agoychw Iotot VAT/margin scheme: VAT deductible for businesses. Delivery and trade-in possible at any time for all items from the industrial sector. Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2013, skupna višina: 2.100 mm, skupna dolžina: 9.000 mm, skupna širina: 1.050 mm, Weight: 6,000 kg Price: On request - Special features: - Description: Not operational: Multiple loose sensors and the glue tank have been dismantled. The machine has not been tested yet. Rsdpfxoyrp Uaj Agtet - Year of manufacture: 2013 - Documentation available: No - CE certificate available: No - Serial number: - Number of units [pcs]: 9 - 1st unit type: - Tools included: Yes - 2nd unit type: - Type/Brand: Nordson - 3rd unit type: - Tools included: Yes - 4th unit type: - Tools included: No - 9th unit type: - Tools included: Yes - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (L x W x H) - Transport weight [kg]: 6000 kg - Number of transport packages [pcs]: 4 Financial Information VAT: The price stated is net of VAT VAT/margin scheme: VAT is deductible for entrepreneurs Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2017, skupna višina: 2.100 mm, skupna dolžina: 6.700 mm, skupna širina: 1.050 mm, Weight: 3,500 kg Price: On request - Special features: - Description: Includes a Nordson unit from 2017 - Year of manufacture: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 6 - 1st unit type: - Type/Brand: Nordson - Tools included: Yes - 3rd unit type: - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 41 - Fuse [A]: 50 - Transport dimensions: 6700mm x 1050mm x 2100mm (L x W x H) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 5 Financial Information VAT: The stated price is net, plus VAT VAT/Margin scheme: VAT deductible for businesses Rjdpjyrpvwefx Agtst Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 3 Redpex D Nvgofx Agtot Ta 3-osni stroj HOMAG WEEKE OPTIMAT BHX 500 je bil izdelan leta 2011. Ponaša se z robustnim CNC obdelovalnim centrom z delovnim območjem 2500 mm x 1300 mm, glavno elektro vreteno ima moč 6 kW, največja debelina obdelovanca pa je 80 mm. Vključuje 84 vrtalnih vreten in dvojni rezkalni vreteni, vsaka z močjo 6 kW pri 18.000 vrtljajih/min. Če želite kakovostne CNC zmogljivosti, razmislite o stroju HOMAG WEEKE OPTIMAT BHX 500, ki je na voljo za prodajo. Za več informacij nas kontaktirajte. Vrste uporabe CNC obdelava lesa

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Rodpfx Agjytr Hbotet Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, moč: 19 kW (25,83 KM), potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.730 mm, število vreten: 20, Število orodnih postaj v orodni glavi 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverse beams: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Rjdpfx Asyttf Sjgtot CNC controller model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied as available (left side only). The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.550 mm, višina obdelovanca (maks.): 40 mm, število vreten: 30, največja hitrost vožnje: 80.000 mm/min, TECHNICAL DETAILS Travel Range X-axis: 4,175 mm Travel Range Y-axis: 1,550 mm Traverse Speed X-axis: 80 m/min Traverse Speed Y-axis: 80 m/min Traverse Speed Z-axis: 30 m/min Max. Workpiece Height: 40 mm Number of Suction Traverse Bars: 8 Spindles Number of Spindles for Vertical Drilling: 20 Number of Spindles for Horizontal Drilling in X-direction: 10 Total Number of Spindles: 30 Milling Unit Number of Controlled Axes: 4 + Flex5 Motor Power: 15 kW Automatic Tool Changer Liquid-cooled Saw Unit Rjdoyttcwopfx Agtot Tool Magazine 1 Number of Positions: 18 Tool Magazine 2 Number of Positions: 10 EQUIPMENT NC Positioning Suction Units Vacuum Pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, številka stroja/vozila: 70004, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, Tehnične specifikacije Dimenzije - dolžina: 9,8 m Rodpfx Agoyzc Igotot - širina: 1,5 m - višina: 1,8 m Moč motorja: 40 kW Oprema - pomična hitrost: 6 - 30 m/min - debelina plošče: min. 8 mm, maks. 60 mm - širina plošč (z robom): min. 65 mm (pri debelini roba 0,4 - 3 mm) - dolžina plošče: min. 150 mm - višina roba: min. 14 mm, maks. 65 mm - debelina roba: min. 0,4 mm, maks. 20 mm

Stanje: rabljeno, Leto izdelave: 2002, Dvostranski softforming stroj za lepljenje robov HOMAG tip Power KF 20/34/QE/30 Redjyyxc Rspfx Agtet Št. stroja 0-202-25-8815, Letnik 2002

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 0-200-24-6287, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 56 A, največja debelina roba: 20 mm, Oprema: CE označba, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and post-processing of various edging materials. Fixed fence on the left side. NOTE: Very well-maintained machine with low operating hours. SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain for workpiece feed, - Maximum workpiece thickness: 60 mm - Motorized height-adjustable pressure beam - Workpiece support with rollers, extendable up to approx. 700 mm - Glue pot lift-off when feed stops - Glue roller clamping before workpiece rear edge - (Remote) manual control for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit with synchronous/counter-rotation, 2x4kW, operation-controlled Rsdpfxsyv Da Ho Agtjt GLUING UNIT A20, comprising: - QA34 glue application unit - Pre-melter for EVA adhesive - Edge magazine for edge thickness from min. 0.4 mm to max. 20 mm - Pressure zone with automatic horizontal adjustment (NC) according to edge thickness, 1 powered and 6 non-powered pressure rollers POST-PROCESSING SECTION: - HL81 end trimming unit, 2 motors (front/rear edge) with motorized fine-adjustable trimming stops - Pre-/flush trimming unit 1.5 kW, top/bottom - FK13 corner rounding unit, 2 motors (top/bottom) with automatic 8-position tool changer and multiple exchange heads, iSystem - Profile scraper MN21, top/bottom, with axis positioning - Flat scraper FA10, top/bottom, (version with 3 tracing rollers) - KS10 belt sanding unit, for straight edges, with oscillation - Buffing unit top/bottom CONTROL: HOMATIC NC 21

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.200 mm, dolžina pomika po osi Y: 1.600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Pripravljen za 1 glavno vreteno s lepilno skupino, nameščeno desno na portalni prečnik. Glavno 5-osno vreteno, 12 kW Vrtalna glava s 31 vreteni: 21 vertikalnih in 10 horizontalnih Vrtalni list za utore, nagib 90° Pihalna šoba za borbo 60 mm Rsdpox Irzcsfx Agtet Krožni magacinski sistem za 32 orodij, HSKF63 Linearni magacinski sistem za 8 pozicij Krožni magacinski sistem za 10 pozicij Lepilna skupina Power Edge Pro Duo Varnostni nadzor z odbijačem Odrezovalni trak za ostružke Vakuumska črpalka Upravljalna programska oprema PowerTouch, WoodWop

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood koda: RU0010622 - Koda proizvajalca: 2-083-01-0276 - Stanje: rabljeno - Funkcionalnost: ni testirano - Združljiv stroj: - Teža: 3 kg - Dimenzije: 36x26x21 cm - Če vas zanima, nudimo storitev pregleda, kontaktirajte nas. Rsdpfx Ageyrq Alotot

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: RU0010621 - Koda proizvajalca: 2-083-01-0278 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Združljiv stroj: - Teža: 3 kg - Dimenzije: 36x26x21 cm - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. Redpfx Agoyrqzujtet

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: RU0006834 - Koda proizvajalca: 4-085-08-0202 - Stanje: Rabljeno - Funkcionalnost: Ni testirano - Kompatibilni stroj: - Teža: 10 kg - Dimenzije: 70x46x34 - Če ste zainteresirani, nudimo storitev pregleda, kontaktirajte nas. Rsdpfxsyrqyke Agtet

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ferwood koda: AGG0073 - Koda proizvajalca: 1-056-11-0660 - Stanje: Rabljeno - Funkcionalnost: Popolnoma delujoče - Kompatibilnost stroja: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Teža: 10 kg - Dimenzije: 46x39x27 - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Rsdpoyrpxxofx Agtot

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ferwood koda: AGG0073 - Koda proizvajalca: 1-056-11-0660 - Stanje: Rabljeno - Funkcionalnost: Popolnoma delujoče - Kompatibilnost stroja: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Teža: 10 kg - Dimenzije: 46x39x27 - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Redpfeyrpw Ijx Agtot

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003572 - Koda proizvajalca: 2-007-03-3970 - Stanje: Kot novo (razstavni kos) - Funkcionalnost: Popolnoma delujoče - Združljivost z napravami: - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Rodpfx Ageyrn Ryjtet 2KG - 36X26X21

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003547 - Koda proizvajalca: 3-008-23-1410 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoč - Združljiv stroj: - V primeru zanimanja ponujamo storitev pregleda, kontaktirajte nas. 4KG 46X39X27 Redpjyrn I Esfx Agtjt

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ferwood koda: RS0003546 - Koda proizvajalca: 3-812-08-5500 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Kompatibilen stroj: - Če vas zanima, nudimo storitev revizije, kontaktirajte nas. 3KG 36X26X21 Redpfx Ageyrn Iretjt

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003545 - Koda proizvajalca: 2-025-15-2020 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Združljiv stroj: - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. 3KG 36X26X21 Redpfsyrn Ifsx Agtst

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ferwood koda: RS0003544 - Koda proizvajalca: 2-025-15-2010 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Združljiv stroj: - Po želji nudimo servisni pregled, kontaktirajte nas. 3KG 46X39X27 Rjdpsyrn Hbefx Agtet

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Edge banding machine from 2006. The HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, allowing for workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It is equipped with a single-sided edge banding unit capable of processing various edge materials up to 20 mm thick. If you are looking for high-quality edge processing solutions, consider the HOMAG Optimat KAL 330 edge banding machine that we have for sale. Contact us for further details. • Line workpiece capacity: • Length: 250–3000 mm • Width: 120–1200 mm • Thickness: 8–60 mm • Edge banding machine (KAL 330) – Base and transport • Solid machine frame; extendable workpiece support with roller rail, ~800 mm • Transport chain, 80 mm wide with rubber pad; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed: 18–25 m/min • Working height: 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece offset/overhang: 30 mm • Workpiece thickness: 12–60 mm • Edge material from strip: 0.4–20 mm (max. cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max. cross-section: PVC 135 mm², veneer 100 mm²) • Max. coil diameter: 830 mm • Pneumatic connection: 7–8 bar • Feed system and control (integrated with KAL 330) • Flexible workpiece feed system wz10 for automatic feeding (longitudinal and transverse); for dimensionally accurate, square parts • Stepless adjustment of infeed guide (axis), speed adjustable at the entry terminal • Automatic lateral adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Entry terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granulate storage • Quick-change system for QA/QE application unit; QA front glue reservoir for color change • Base glue unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max. Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Milling unit HL84 with fixed milling fence for sensitive edges • Pneumatic milling motor adjustment (2 positions: flush/even and with overhang for contour milling) Rsdpfxsytf Irs Agtot • Pneumatic bevel/straight switching; manual side milling fence adjustment for changing edge thickness • Rough trimming unit: 2 motors arranged vertically, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: rough trimming with approx. 0.2 mm overhang / without overhang • Reserved space for a fine trimming unit • Contour milling unit Servo FK13 automatic: • 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Servo-driven movements; automatic 8-position tool changer • Feed speed max. 20 m/min; minimum distance between workpieces: 500 mm • Workpiece thickness: 12–60 mm • Automatic FK adjustment for consistent radii with varying edge thicknesses; automatic retraction • FK workpiece guide with additional clamping for min. 120 mm workpiece length (single-sided) • Finishing and cleaning • Multi cleaning system MN21 automatic:

Stanje: zelo dobro (rabljeno), Double-sided stand-alone machine (or can be used as the 1st and/or 2nd machine in a production line). Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 60 mm Rodpfxolikyds Agtjt Working width (min/max): 240 / 2500 mm Control: PC 22 Feed speed (adjustable): 10–40 m/min Cam pitch: 500 mm EDGE PROCESSING (for each side): - Protection milling unit (pre-milling): 1 x 4.5 kW (hydro) - Chipping aggregate KD 11 (2 x 8.1 kW) hydro EDGE BANDING UNIT (for each side): - Gluing unit (hot melt + pre-melter): A3 + A34 - Edge magazine for rolls (slot no. 6) - Edge pressure zone “C” - Pre-milling unit: 2 x 0.55 kW - Milling unit MF 20 (2 x 0.55 kW) 20° - Profile scraping aggregate PN 20 - Finishing unit (flat scraper + buffing aggregate) FA 11 Free space