Homag Bandbreite Mm nakup rabljenega (80.020)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Edgebanding machine from 2016. The HOMAG KAL 370 features a continuously adjustable feed rate of 18-20 m/min and is suitable for workpiece thicknesses from 8 to 60 mm. It is equipped with advanced gluing and milling units as well as a comprehensive software package for efficient operation. If you are looking for a high-quality edgebander, the HOMAG KAL 370, which we offer for sale, is a strong choice. Contact us for further details. • Feed speed: Infinitely variable 18-20 m/min • Fixed guide side: Left • Workpiece thickness: 8-60 mm • Workpiece overhang: 30 mm • Through-feed preparation: Pre-installed for Boomerang TFU140 • Feed lock: Available • Equipment packages: Future Package 5; Foil/high-gloss package (bottom) • Infeed features: Sliding carriage; Workpiece alignment at infeed; Workpiece support with roller conveyor; Infeed lock • Workpiece transport: Transport unit; Top pressure • Cleaning/preparation: Separating agent spray unit (top/bottom) • Jointing/milling: Joint trimming unit; I-System DIA joint trimming set WD60; Workpiece preheating (up to 60 mm thickness) • Gluing: Gluing unit; Preparation for Airtec activation unit; Adhesive application system; Application units QA60 and PU60; Pressure vessel for PU application unit Hjdpfxsy Hrtpj Alfjfg • Magazine/pressure: Edging magazine; Pressure zone • Spraying: Lubricant spraying system (top, bottom, side) • Trimming/milling: Trimming unit HL81 (angled/straight, 0.8 kW); Pneumatic adjustment for flush/overhang trimming; Pre-milling unit BF10; HM milling cutter set (straight); Profile milling unit FK11 • Tool loading/change: I quick-change head system (automatic adjustment/FK); I-DIA radius milling cutter set (for FK, R=2 mm, Z=4); Standard milling unit SF21; Multiprofile scraper MN21 (automatic); Profile knife set for MN20/21 • Additional units: Joint pull-off blade FA20 BASIC; Automatic scanning for joint FA20; Buffing unit FA06 (top/bottom); Powercontrol PC23 Powertouch • Control/software: WoodCommander software package; Antenna cycle control; Machine data collection and analysis; Error diagnostics; Teleservicenet-soft • System/networking: Emergency-stop interlock; Network connection (Ethernet); Hand control for setup mode; Language: German • Documentation: On data carrier and paper Additional equipment • Boomerang return system TFU140/20/08-Optimat • Workpiece identification (sensor-assisted) • Basic outfeed return • CE for cells (systems)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, število osi: 4, This 4-axis HOMAG BAZ 211/40K was manufactured in 2010. It features a vacuum clamping system with multiple configurations, a high-performance vacuum pump, and a Flex5+ saw, routing, and drilling unit. The machine is equipped with three tool changers and an edge banding package for advanced processing capabilities. If you are looking for a high-quality CNC woodworking machine, you should consider the HOMAG BAZ 211/40K that we have for sale. Contact us for more details. • Vacuum Clamping System: 8x 120x50 mm (0/90°) K-table • Rotatable Vacuum Clamping System: 8x 125x75 mm (360°) K-table • Vacuum Pump: Reinforced, 100/140 m³/h • Unit: Flex5+ saw, routing, and drilling unit for tool changers (WZW) • Tool Changer: 3x tool holder for Flex5+ (WZW) • Edge Banding Package: Power EDGE 360° for BAZ 211/311 Venture • Edge Processing: Workpiece edge blow-off nozzle • Routing/Scraping: Combined flush-trimming and scraper unit (WD 60 mm) • Profile Knives: 2x for scraper Hodpsy Hrr Eefx Alfofg • Radius Milling Cutter Head: 2x WPL radius cutter head • Material Handling: Tool transfer station for B200/300/K • Software: Upgraded to woodWOP 6.0

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, širina obdelovanca (maks.): 60 mm, največja dolžina izdelka: 7.845 mm, Edge banding machine from 2012. The HOMAG KAL211 Edition 2264 offers a working height of 950 mm and is suitable for workpiece thicknesses from 8 mm to 60 mm. It is equipped with various units such as a gluing unit, joint trimming unit, and preliminary milling unit, enhancing its versatility. If you are looking for a high-quality edge banding machine, consider the HOMAG KAL211 Edition 2264, which we have for sale. Please contact us for further details on this machine. • Feed speed: 18–25 m/min • Feed speed (max with FK11 unit): 20 m/min • Working height: 950 mm • Pneumatic connection: 6 bar • Total length: 7,845 mm • Minimum workpiece width: • 60 mm for 12–22 mm thickness • 105 mm for 23–40 mm thickness • Workpiece thickness: 8–60 mm (extended with options) • Edge material thickness: • Rolls: 0.3–3 mm • Strips: 0.4–20 mm • Electrical specifications: • Supply voltage: 400 V / 3 Ph / 50 Hz • Total connected load: 67 A • Control voltage: 24 V • Control system: powerControl PC22 (Windows XP based) • Software: woodCommander; woodScout (option); Schuler MDE Basic • Equipment/Units: • Separator spray device (top/bottom) • Joint trimming unit (2 motors, each 4 kW) • Gluing unit A20 with 2 rollers (Quickmelt system) • Application unit PU65 (interchangeable, Teflon-coated) • Preparation for laserTec activation unit • End trimming unit HL84 (0.8 kW) • Preliminary milling unit BF10 (1.5 kW) • Multi-profile forming unit FK11 (manual adjustment) • Profile scraper PN10 • Finish unit (glue joint scraper + buffing unit) • Cleaning agent spray device Hodpfx Alsy Hi Eijfofg Additional equipment • Automation package (No. 4013): • Automatic adjustment of infeed fence and pressure zone • Electronic height adjustment for the upper pressure beam

Stanje: rabljeno, številka stroja/vozila: 007516, Max. working width: 2500 mm Hodpfx Ajwuz D Telfofg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, moč: 14 kW (19,03 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, DRILLTEQ V-200 (OPTIMAT BHX055) Hfedpfx Alsyvh Dpjfjg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. Hfjdpfx Aemhhypslfeg The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments Hjdpfx Aomhh Dhelfofg - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. Hjdpfx Alomhh Dzofefg We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time Hfedemhhx Ispfx Alfsg - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Hedpfsmhhyaex Alfefg - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) Hodpoh Ek Dasfx Alfefg - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Hedpemhh Anjfx Alfjfg Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth Hfjdpjmhhf Sefx Alfeg - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Hjdpomhhl Hefx Alfefg Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) Hodpfx Alemidyfefefg - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: Hsdemkixwepfx Alfofg - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Hjdemhh Dtspfx Alfjfg Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: rabljeno, številka stroja/vozila: 008403, Maks. višina obdelave: 160 mm Maks. obdelovalna širina: 250 mm Maks. hitrost pomika: 24 m/min Hjdpsykivhefx Alfefg Število delovnih vreten: 5

Stanje: rabljeno, Leto izdelave: 1999, skupna višina: 3.000 mm, skupna dolžina: 6.400 mm, skupna širina: 4.300 mm, No. 3269 CNC Machining Center HOMAG BAZ 41/30K Used, Year of manufacture: 1999 Working dimensions: X 3000 mm / Y 1300 mm / Z 250 mm Hsdjy Dtp Hepfx Alfofg Edgebanding unit Drilling and milling unit with 4 spindles Flush milling unit Sanding unit Interchangeable air nozzle Adjustable milling and drilling unit Underfloor milling unit 12-position rotary tool changer WoodWOP 5.0 control system Overall dimensions with safety fence approx. 6400 x 4300 x 3000 mm (LxWxH) Sale on behalf of a customer, ex location near 71063 Sindelfingen, without disassembly, transport, or installation Disassembly, loading, and transport by us optional on request Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; sold as seen Photos and videos are for reference only and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery conditions: ex location

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 3.000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 vacuum cups, side and longitudinal positioning pins, LED position display for vacuum cups Venture 316 Future Package 10 lift rails, connection for Power-Clamp, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece lengths: All units, single: 3300 mm; pendulum max.: 1740 mm Tool diameter 25 mm: single 3475 mm; pendulum max.: 1915 mm – Workpiece width: Front stop: 950 mm, all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping fixtures Hedpjy E Npfefx Alfofg – Up to 60 mm with standard clamps SAFETY AND PROTECTION FEATURES: EC-compliant; SAFETY FENCE ON RIGHT WITH DOOR Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer, side-mounted Drilling head with 16 spindles (vertical 12 / horizontal 4 / none at 90°) AGGREGATE INTERFACE DRIVE5C+ TOOL MEASURING PROBE CHANGER SOFTWARE FOR POSITION MEASUREMENT AND ROTATION OF CNC COORDINATES TOOL TRANSFER STATION COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 300/360 m3/h Powerclamp pneumatic package Control: POWERCONTROL PC85 with POWERTouch control system; IPC PowerPack, Operator pedestal for program start; camera system with tablet PC WOODWOP CAD/CAM INTERFACE STANDARD Documentation and control texts: German Delivery includes only the pictured tools and HSK holders!

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Ta industrijska proizvodna linija HOMAG WEEKE je bila izdelana leta 2007. Ima celovito postavitev za obsežno obdelavo plošč in lepljenje robov, vključno z avtomatskimi nakladalnimi sistemi, centralnim valjčnim transporterjem, več moduli za lepljenje robov ter portalnim manipulatorjem za zlaganje. Idealna za optimizirano lesno proizvodnjo, zagotavlja učinkovito rokovanje in natančnost. Razmislite o priložnosti za nakup te industrijske linije HOMAG WEEKE. Kontaktirajte nas za več informacij o tem stroju. Hfsdpfsx D Dq Ssx Alfog Vrste uporabe Kompletna proizvodnja

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, CNC MACHINING CENTER WITH EDGE BANDING UNIT AND ASSOCIATED POST-PROCESSING UNITS. Technical specifications: Working dimensions: + X-axis: 3,050 mm in single occupancy + X-axis: 900 mm in pendulum operation + Y-axis: Milling up to 1,220 mm with tool diameter 25 mm Edge banding up to 1,220 mm All units up to 1,170 mm Workpiece thickness up to 60 mm with standard clamps 6 workpiece consoles for hose-free vacuum system 4 workpiece stops in X-direction, integrated into the machine carrier, for large workpieces 6 workpiece stops in X-direction, one per console One workpiece stop each left & right in Y-direction 4 lifting rails for easy positioning of heavy workpieces LED setup assistance for easy positioning of vacuum cups and consoles Equipment: Milling spindle 11 kW, HSK F63 Speed 0 - 18,000 rpm Liquid cooling Hodpey Hrh Tofx Alfjfg C-axis for use of processing units, with torque transmission and 3-point support 12-position tool change magazine Drilling head with 17 vertical spindles Spindle spacing 32 mm Air blow nozzle to clean workpiece edges Interchangeable edgebanding unit for 360° edgebanding from butt joints. With single-roll magazine With granulate feed Edge thickness up to 3 mm Adapter units: + Horizontal drilling head, cross-head design + Lock case milling unit, 2 outlets + Saw unit 90 degrees + Swiveling drilling/sawing unit + Combination radius milling / scraper unit Control: POWERCONTROL with: WOOD WOP AV license WOODWOP

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, dokumentacija / priročnik, dvostranski, Additional equipment: Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Hfedpfexwui Eex Alfeg Minimum workpiece gap: 500 mm

Stanje: rabljeno, Obseg dobave vključuje: 01x Prečka za paletni regal, rabljena Barva materiala: rumena Tip prečke: 7BB Okvirni profil: 120 x 50 mm Izvedba: čelna prečka Zaponka: 3 kavlji Svetla širina: 2.700 mm maks. nosilnost na par prečk 3.000 kg, pri enakomerno porazdeljeni obremenitvi 02x Varovalni zatiči, rabljeni Izvedba: popolnoma pocinkani Za varovanje vzdolžnih nosilcev proti nenamerni odstranitvi Hsdpfjy Nxf Dex Alfefg Vaši kontakti v našem podjetju: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o izdelku: Ta izdelek je na voljo samo za osebni prevzem. Dodatni transport oziroma pošiljanje tega izdelka je povezano z dodatnimi stroški, ki jih je mogoče pri nas preveriti glede na lokacijo dostave oziroma obseg dobave.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Pet-osni obdelovalni center v zelo dobrem stanju. Hodpjx Ur Iisfx Alfefg Tehnični podatki bodo kmalu posodobljeni.