KOPROCESOR HC010 REV3

HOMAG

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Hjdpfxeyqybus Ab Eefd Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, delovna širina: 1.935 mm, število vreten: 40, višina plošče: 350 mm, delovna dolžina: 6.200 mm, število osi: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in the tool magazine: 22 (at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X-direction: 4 Spindles for horizontal drilling in Y-direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum pods for securing the workpiece Safety mats at the front Hsdpfx Abeyqx U Ho Eefd Vacuum pump Chip conveyor Fixed grooving unit for grooves in X-direction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and accepts responsibility for installation, securing, and use of the machine at the destination. External reference: 8105

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Specifikacija: Dolžina reza: 4300 mm Širina reza: 4300 mm Izmet žaginega lista: 80 mm Upravljalni zaslon na desni strani Delovna miza stroja popolnoma zračno oblazinjena Hitrost programskega prislona naprej: 25 m/min Hitrost programskega prislona nazaj: 90 m/min Standardne spone: 225, 325, 475, 775, 1075, 1825, 3425 mm Power Concept – omogoča sočasno rezanje več trakov z različnimi dolžinami prečnega reza z do 40 % večjo zmogljivostjo Nadzor višine pritisne letve Hitrost vozička žage: 130 m/min Glavni motor žage: 11 kW s pnevmatskim dvigom Predrezovalna enota: 1,5 kW s pnevmatskim dvigom Elektronska nastavitev predrezovalne žage preko upravljalnega zaslona 4 zračne mize: 2160 x 650 mm Tiskalnik etiket 400 V, 50 Hz Upravljalni zaslon na dotik Control Touch Prenos podatkov prek omrežja in USB priključka Hedpfx Absyuw Umo Eefd CE Eco Plus tehnologije omogočajo do 20 % prihranka energije

Stanje: zelo dobro (rabljeno), EINSEITIGER KANTENANLEIMER (links) Hfsdpfeyt Izbox Ab Eed Kanten (Band auf Rollen) Dicke (min/max) mm 0,3 / 3 Kantenstärke in Streifen / Leisten (min/max) mm 0,4 / 20 Plattenstärke (min/max) mm 8 / 60 NEU (2024) Numerische Steuerung EDGETEQ MOD - Power Touch (WoodCommander) Einstellbare Vorschubgeschwindigkeit bis zu 25 m/min Zuführsystem EZ 14 Sprühvorrichtung (Antihaftmittel) Anschlaglineal, per N.C. verstellbar Vorfräseinheit (vertikale Fugenfräser) 2 x 3 kW Leimeinheit (P.U.R.-Leim + Schnellschmelzsystem) Druckzone für das Band, per N.C. einstellbar Kantenrollen-Halteeinheit (mit 2 Abrollern) Abschneideeinheit HL 84 (2 x ca. 0,5 kW) Pneumatisch schwenk- und einstellbar Grobschneideeinheit BF 20 (2 x ca. 1,5 kW) Multifunktionseinheit (Konturfräsen) FK 11 (2 x ca. 0,4 kW) Konturabzieheinheit Feineinheit (Leimabzieher + Poliereinheit) FA 11 Plattenrückführungssystem "LIGMATECH" Mod. ZHR 541/L/095 (mit Portalbrücke und 360° drehbarem Vakuumkopf)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, moč: 19 kW (25,83 KM), potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.730 mm, število vreten: 20, Število orodnih postaj v orodni glavi 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverse beams: 8 Number of tool magazine positions: 18 Hfsdjyttf Sspfx Ab Esd Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW CNC controller model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied as available (left side only). The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.550 mm, višina obdelovanca (maks.): 40 mm, število vreten: 30, največja hitrost vožnje: 80.000 mm/min, TECHNICAL DETAILS Travel Range X-axis: 4,175 mm Travel Range Y-axis: 1,550 mm Traverse Speed X-axis: 80 m/min Traverse Speed Y-axis: 80 m/min Traverse Speed Z-axis: 30 m/min Max. Workpiece Height: 40 mm Number of Suction Traverse Bars: 8 Hfedpfx Abeyttcwo Eed Spindles Number of Spindles for Vertical Drilling: 20 Number of Spindles for Horizontal Drilling in X-direction: 10 Total Number of Spindles: 30 Milling Unit Number of Controlled Axes: 4 + Flex5 Motor Power: 15 kW Automatic Tool Changer Liquid-cooled Saw Unit Tool Magazine 1 Number of Positions: 18 Tool Magazine 2 Number of Positions: 10 EQUIPMENT NC Positioning Suction Units Vacuum Pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Hfsdpfx Ajytr Hbob Ejd Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Edge banding machine from 2006. The HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, allowing for workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It is equipped with a single-sided edge banding unit capable of processing various edge materials up to 20 mm thick. If you are looking for high-quality edge processing solutions, consider the HOMAG Optimat KAL 330 edge banding machine that we have for sale. Contact us for further details. • Line workpiece capacity: • Length: 250–3000 mm • Width: 120–1200 mm • Thickness: 8–60 mm • Edge banding machine (KAL 330) – Base and transport • Solid machine frame; extendable workpiece support with roller rail, ~800 mm • Transport chain, 80 mm wide with rubber pad; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed: 18–25 m/min • Working height: 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece offset/overhang: 30 mm • Workpiece thickness: 12–60 mm • Edge material from strip: 0.4–20 mm (max. cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max. cross-section: PVC 135 mm², veneer 100 mm²) • Max. coil diameter: 830 mm • Pneumatic connection: 7–8 bar • Feed system and control (integrated with KAL 330) • Flexible workpiece feed system wz10 for automatic feeding (longitudinal and transverse); for dimensionally accurate, square parts • Stepless adjustment of infeed guide (axis), speed adjustable at the entry terminal • Automatic lateral adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing Hjdsytf Irjpfx Ab Ejfd • Entry terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granulate storage • Quick-change system for QA/QE application unit; QA front glue reservoir for color change • Base glue unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max. Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Milling unit HL84 with fixed milling fence for sensitive edges • Pneumatic milling motor adjustment (2 positions: flush/even and with overhang for contour milling) • Pneumatic bevel/straight switching; manual side milling fence adjustment for changing edge thickness • Rough trimming unit: 2 motors arranged vertically, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: rough trimming with approx. 0.2 mm overhang / without overhang • Reserved space for a fine trimming unit • Contour milling unit Servo FK13 automatic: • 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Servo-driven movements; automatic 8-position tool changer • Feed speed max. 20 m/min; minimum distance between workpieces: 500 mm • Workpiece thickness: 12–60 mm • Automatic FK adjustment for consistent radii with varying edge thicknesses; automatic retraction • FK workpiece guide with additional clamping for min. 120 mm workpiece length (single-sided) • Finishing and cleaning • Multi cleaning system MN21 automatic:

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, This HOMAG KFL 526 / C was manufactured in 2006. The robust double-sided edge banding machine processes workpiece thicknesses from 12 to 40 mm and formats up to 2500 x 1200 mm. The equipment includes a gluing unit, a profile milling unit, and a finishing unit for precise edge processing. Ideal for efficient edge banding at speeds of up to 35 m/min. Contact us for more information about this machine. Hedpfx Absx U Uzro Eefd Additional Equipment • Top/bottom separating agent spraying device / Double hogger unit longitudinal/crosswise: 6.6 kW with electro-pneumatic control / Gluing unit A3 - 2 rollers / Profile milling unit FF12 top/bottom with motors at 12,000 rpm / Finishing unit FA11 top/bottom / Stepless stop cams with a maximum cam overhang of 25 mm / Standard milling unit SF20 6.6 kW / Rough trimming unit 0.55 kW • PUR Nordson melting station / tool set / extraction duct Machine advantages Technical machine advantages • Workpiece thickness: 12 - 40 mm / minimum workpiece size (LxW): 250 x 240 mm / maximum workpiece size (LxW): 2500 x 1200 mm / maximum workpiece weight: 50 kg • Edgebanding tape thickness: 0.4 - 3 mm / maximum edge cross-section (plastic): 135 mm² / maximum edge cross-section (veneer): 100 mm² / maximum roll diameter: 830 mm • Longitudinal processing speed: up to 35 m/min for thin edges up to 0.6 mm / up to 30 m/min for thick edges up to 3 mm • Cross processing speed: up to 30 m/min for panel dividing / up to 20 m/min for edge processing • Minimum workpiece spacing: 500 mm

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Glavni pogon Hsdpfxjx D Nvgj Ab Esfd Število osi: 3 Ta 3-osni stroj HOMAG WEEKE OPTIMAT BHX 500 je bil izdelan leta 2011. Ponaša se z robustnim CNC obdelovalnim centrom z delovnim območjem 2500 mm x 1300 mm, glavno elektro vreteno ima moč 6 kW, največja debelina obdelovanca pa je 80 mm. Vključuje 84 vrtalnih vreten in dvojni rezkalni vreteni, vsaka z močjo 6 kW pri 18.000 vrtljajih/min. Če želite kakovostne CNC zmogljivosti, razmislite o stroju HOMAG WEEKE OPTIMAT BHX 500, ki je na voljo za prodajo. Za več informacij nas kontaktirajte. Vrste uporabe CNC obdelava lesa