V/I PLOŠČA CPU RAM-a

HOMAG

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: 0-201-50-1289, obratovalne ure: 7.062 h, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.400 mm, model krmilnika: POWERCONTROL PC 85, višina plošče: 300 mm, največja hitrost vretena: 24.000 obr/min, No reserve price – guaranteed sale to the highest bidder! CNC machining center for milling, drilling, and edge banding! The machine must be collected between 10.06.26 and 30.06.26! TECHNICAL DETAILS Working area X-axis: 6,000 mm Working area Y-axis: 1,400 mm Maximum panel pass-through height: 300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Number of controlled axes: 5 axes Number of working zones: 4 Maximum edge height: 65 mm Number of drilling units: 1 Total number of drilling spindles: 21 Total number of vertical + horizontal spindles: 25 Number of milling spindles: 2 Total tool changer positions: 77 Barcode reader model: DATALOGIC Worktable and workpiece clamping Number of rails: 12 Number of pumps: 1 Vacuum pump flow rate: 300 m³/h Positioning via NC Vacuum cups for workpiece clamping NC positioning of vacuum cups Drilling unit Drilling unit 1: Top Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Total number of vertical + horizontal spindles: 25 Milling units Milling spindle 1: Top Number of controlled axes, spindle 1: 5 Motor power, spindle 1: 15 kW Spindle speed, spindle 1: 24,000 rpm Automatic tool change Milling spindle 2: Top Number of controlled axes, spindle 2: 4 Automatic tool change, spindle 2: Yes Motor power, spindle 2: 11 kW Spindle speed, spindle 2: 12,000 rpm Edge banding unit Number of edge banding units: 1 Max. panel height: 60 mm Model: POWER EDGE 360° Position: Mounted on the main beam of the machine Number of positions edge tape magazine: 2 Glue unit Glue pot for hot melt adhesive Pre-melter for hot melt adhesive Tool magazines Number of tool magazines: 4 Positions in tool magazine 1: 72 Location of tool magazine 1: Rear of the machine Positions in tool magazine 2: 2 Location of tool magazine 2: Rear of the machine Positions in tool magazine 3: 2 Location of tool magazine 3: Rear of the machine Positions in tool magazine 4: 1 Use of tool magazine 4: For saw blade unit D:350 mm only MACHINE DETAILS Control system: WINDOWS 10 Cgodpfx Ajy Uviwof Dju Machine programming software: POWERCONTROL PC 85 EQUIPMENT Pod and rail worktable NC-positioned workpiece clamping Vacuum cups Vacuum pump Drilling unit top 2 milling spindles POWER EDGE 360° edge banding unit Glue pot for hot melt adhesive Pre-melter for hot melt adhesive Edge tape magazine 4 tool magazines DATALOGIC barcode reader Safety net Chip conveyor CE-marking Safety mats The machine is sold and delivered in its actual physical and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial descriptive materials. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External Reference: 8527

Leto izdelave: 2006, stanje: rabljeno, največja debelina roba: 12 mm, hitrost pomika os X: 40 m/min, višina plošče: 60 mm, dolžina plošče: 2.400 mm, širina plošče: 1.000 mm, številka stroja/vozila: 0-202-48-1184, No reserve price – guaranteed sale to the highest bidder! Collection of the machine must take place between 10.06.26 and 30.06.26! The machinery package consists of four machines as follows: Item 1 – KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Movement system with frame Suction cups Item 2 – HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Bonding system: PUR, Laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Max. panel length: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling unit Corner rounding unit Grooving unit Pressure system Panel support guides NC positioning Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically sequenced engagement NC unit positioning Unit 2: Double milling top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm NC positioning Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically sequenced engagement NC positioning Gluing and edging system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel edge Edge processing units Number of edge processing units: 8 Edge processing unit 1: End trimming unit Number of motors: 2 NC positioning Edge processing unit 2: Rough trimming top and bottom Number of motors: 2 Edge processing unit 3: Fine trimming for flush and radius milling Number of motors: 2 NC positioning Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change NC positioning Edge processing unit 5: Milling/planing unit Number of motors: 1 Unit 5 motor power: 12 kW Cjdpfx Ajy Ur Hlsf Dogu Unit 5 speed: 10,000 rpm Automatic tool change NC positioning Edge processing unit 6: Edge scraping blade NC positioning Edge processing unit 7: Glue scraping blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Item 3 – KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Movement system with frame Suction cup system Item 4 – LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return conveyor for edge banding machine Max. panel width: 1,000 mm Max. panel length: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8522

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 7.610 h, vhodna napetost: 400 V, vhodni tok: 10 A, skupna višina: 1.650 mm, skupna dolžina: 4.400 mm, skupna širina: 1.000 mm, TEHNIČNI PODROBNOSTI Skupna višina: 1.650 mm Skupna dolžina: 4.400 mm Skupna širina: 1.000 mm Barva: Siva Delovne ure: 7.610 PODROBNOSTI O STROJU Teža: 2.500 kg Letnik proizvodnje: 2018 Dokumentacija na voljo: Ne CE oznaka prisotna: Da CE certifikat na voljo: Ne Serijska številka: Itsbn Dztwjy Ewv Tj Tsg Napetost: 400 V Poraba toka: 10,3 A Cgodpfx Aoy Tnuvsf Dju Varovalka: 16 A Transportne mere: 4.400 mm x 1.000 mm x 1.650 mm (d x š x v) Transportna teža: 2.500 kg Število transportnih paketov: 1 OPREMA Predrezalna enota Lepljena enota Pritrdilni valji Kapna enota Groba rezkalna enota Radius vlečna enota Enota za zaobljanje robov Ravna vlečna enota Krtačna enota

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 0-200-03-9040, Funkcionalnost: popolnoma funkcionalen, največja debelina roba: 20 mm, hitrost pomika os X: 18 m/min, leto zadnje generalne obnove: 2025, Stroj je bil 10. 11. 2025 popolnoma generalno obnovljen in opremljen z dvema novima lepilnima posodama. Stroj je bil letno vzdrževan – leta 2023 sta bila programska oprema in računalniški sistem popolnoma zamenjana. Stroj je opremljen z naslednjimi agregati: Enota za spajanje/predispor Tlačna cona Odkapni agregat (HL) Rezkalni agregat (MFL) Profilni izvlečni agregat (PN) Polirna enota (SM) Lepilni sistem FE-MA-TECH Advanced PUR 2 kg TEHNIČNE PODROBNOSTI Cjdezap H Sepfx Af Degu Podajalna hitrost: 18 m/min Debelina plošče: 10 - 60 mm Debelina robnega traku: 0,3 - 20 mm PODROBNOSTI O STROJU Lepilni sistem: FE-MA-TECH Advanced PUR 2 kg

Stanje: rabljeno, številka stroja/vozila: 008516, Tip nameščenega roba: tanek rob, debel rob, masivni les Lepljenje: EVA, PUR Spojnično rezkanje: da Večnamenska enota: da Cgsdszbrn Iepfx Af Dsu Maks. hitrost podajanja: 18 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 7 kosov

Stanje: rabljeno, številka stroja/vozila: 008198, Delovno območje os X: 4200 mm Delovno območje os Y: 1400 mm Delovna površina: z vakuumskimi konzolami Moč glavnega vretena: 18,5 kW Število krmiljenih osi: 4 osi Največja višina roba: 60 mm Število vrtalnih vreten: 35 Csdpfex A Hbkjx Af Dsgu Število mest za orodje: 26

Stanje: rabljeno, številka stroja/vozila: 008402, Najv. širina plošče: 4300 mm Najv. dolžina plošče: 2500 mm Najv. izstop glavnega žaginega lista: 110 mm Število vzdolžnih vpenjal: 9 Codpfeygtbmjx Af Djgu Število prečnih vpenjal: 4

Stanje: rabljeno, Leto izdelave: 2007, skupna višina: 2.200 mm, skupna dolžina: 7.500 mm, skupna širina: 1.500 mm, Weight: 4,000 kg Price: On request Codpfxsyzp Ake Af Degu - Year of manufacture: 2007 - Documentation available: No - CE marking available: Yes - CE certificate available: No - Serial number: - Number of units: 8 - 1st unit type: - Tools included: Yes - 3rd unit type: - Tools included: Yes - 4th unit type: - Tools included: Yes - 5th unit type: - Tools included: Yes - 6th unit type: - Tools included: No - 7th unit type: - Tools included: Yes - 8th unit type: - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 46 - Fuse [A]: 63 - Transport dimensions: 7500mm x 1500mm x 2200mm (L x W x H) - Transport weight [kg]: 4000kg Financial information: VAT: The stated price is exclusive of VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector. Yorick Diebels

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, potovalna razdalja osi X: 4.300 mm, pomik osi Y: 2.250 mm, pomik po osi Z: 400 mm, moč vretenovega motorja: 10.000 W, največja hitrost vretena: 24.000 obr/min, število osi: 3, This 3-axis CNC machining center BHP200/VANTAGE714 from HOMAG WEEKE was manufactured in 2013. It offers an impressive working area with an X-axis of approx. 4300 mm and a Y-axis of approx. 2250 mm. The machine is equipped with a powerful 10 kW spindle that reaches speeds of up to 24,000 rpm, and features an automatic tool changer with 14 positions. If you are looking for a high-quality CNC milling machine, you should consider the HOMAG WEEKE BHP200/VANTAGE714 machine we are offering for sale. Contact us for further details. • Series: Weeke Vantage 200 Platform Electrical data (from nameplate): • Supply: 415Y / 240 V • Phases: 3-phase • Frequency: 50 Hz • Full load current: 61 A • Recommended safety fuse: 80 A • Control voltage: 24 V Spindle: • Tool interface: typically HSK-F63 • Tool change: automatic Axes: • Servo-driven gantry system Tool changer: • 14-position Drill block: • Vertical drills • Horizontal drills • Grooving saw Table type: • Flat nesting vacuum table Cgsdpfx Afozatdbj Dsu • MATRIX table variants • Zoned vacuum system • Automatic vacuum control Control / Software (typically paired with): • HOMAG power control / Homatic 2000 IPC • WoodWOP software • MCC production software

Stanje: rabljeno, številka stroja/vozila: 008627, Tip nameščene obloge: tanka obloga, močna obloga, masivni les Cgedpfx Aezakdfsf Dsu Sistem lepljenja: EVA Spojno rezkanje: da Multifunkcijska enota: da Maks. dovajalna hitrost: 14 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 7 kos