Ewd Dk90 nakup rabljenega (108)

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), Ročni obrezovalni stroj DK 90 je sestavljen iz: 2 podmiznih čelilnih žag, linijskega laserja, obrezovalnika, valjčnega transporterja z ločevalnikom iveri in nagibne mize. Seveda so priložene vse pripadajoče krmilne omare in hidravlična enota. Poleg tega je vključenih več šablon in fiksna glava za letve. Ogled je možen po predhodnem in obveznem dogovoru. Cena je brez vključenega 20% DDV, iz tovarne, brez stroškov demontaže, nakladanja, priprave pogodbe in carinjenja. Nwsdpjq U R Etofx Anpsn

Stanje: zelo dobro (rabljeno), Band sawmill consisting of: - Clamping carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for removal of cut timber (manufacturer: SPRINGER) - Elevated operator’s cabin - Rails - Control cabinets - Accessories Optional with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Swaging machine Vollmer PMH - Side (levelling) machine Vollmer EMS Block Bandsaw EWD Esterer EBB1400 Vertical bandsaw for round timber Roller diameter: 1400 mm Roller width: 200 mm Blade width: 206 mm Max. blade thickness: 1.47 mm Max. blade speed: 55 m/s (drive pulleys for summer & winter included) Main motor: 55 kW The crown on the rollers was reground in 2009 Bandsaw Carriage EWD Esterer EW1000 Hydraulic clamping carriage Year of manufacture: 1991 4 clamping blocks with 3 log turners Max. clamping block opening: 1000 mm Max. hook opening: 930 mm Total length: 6000 mm Total width: 2450 mm Total height: 1750 mm Track gauge: 1300 mm The bandsaw mill was purchased used in 2004/2005, re-installed by Esterer, but was never put into full operation, as almost all cutting was done with the frame saw. Since 2004, the bandsaw has run for only 500 operating hours! Very good condition – immediately available – viewing and demonstration possible by appointment. Nsdpovtwzmefx Anpswn Sharpening room equipment: 01. Sharpening machine Vollmer CAL 200 Year of manufacture: 2000 Tooth feed from the left CNC automatic machine for grinding rip and block bandsaw blades (straight grinding, wet grinding) Fully enclosed with extraction For CBN and corundum grinding wheels Includes 2 borazon grinding wheels, 10 mm 02. Swaging machine Vollmer PMH Automatic swaging machine for bandsaw blades Max. blade thickness: 3.5 mm 03. Side/levelling machine Vollmer EMS Levelling machine for swaged bandsaw blades, converted to self-drive in combination with CAL 200, incl. limit switch at the saw blade clamping! Further details: The sharpening machines were purchased used in 2007 and have been stored covered on pallets/wooden constructions in a dry, heated garage. Due to the bandsaw never having been put into full operation, the installation of the sharpening room equipment was repeatedly postponed and as such, the machines are in the same condition as delivered. All operating manuals, descriptions, and wiring diagrams are neatly stored in a box. In 2018 and 2023, the machines were cleaned outside to remove surface dust, lightly oiled with graphite spray, and stored back in the garage. Immediately available – fully functional – in very good condition Location: Austria, near St. Pölten

Stanje: rabljeno, CLECO kabel za vijačnik Highflex 961104-060 6 m Originalni CLECO kabel za industrijske električne vijačnike in montažne sisteme. Robustna izvedba z industrijskimi okroglimi priključki na obeh koncih. Proizvajalec: CLECO Tip: 961104-060 Oznaka: Kabel Highflex Stanje: rabljeno Dolžina kabla: 6 m Izvedba: Povezovalni kabel za vijačne sisteme Tip kabla: Highflex Priključki: Industrijski okrogli priključki na obeh straneh Barva kabla: Oranžna Količina na zalogi: 4 Nwodpszdafyofx Anpjn

Stanje: rabljeno, Leto izdelave: 2010, x-os: 2.600 mm y-os: 700 mm z-os: 700 mm Upravljanje: iTNC 530, Heidenhain Območje vrtljajev – glavna vretena: 20 – 18.000 min/-1 Moč pogona – glavna vretena: 35 / 25 kW Vpenjalni sistem orodja: SK 40 Površina za vpenjanje mize: 2.900 x 700 mm največja obremenitev mize: 2.150 kg Število mest za orodja: 30 Vpenjalni sistem orodja: SK 40 največji premer orodja: 80 mm največji premer orodja pri prosti sosednji vpenjalni glavi: 130 mm največja dolžina orodja: 300 mm največja teža orodja: 6,0 kg Hitri pomik (X / Y / Z): 40 m/min Največja hitrost podajanja: 40.000 mm/min Nwedez I T Rmspfx Anpon Največja sila podajanja: 8 kN Skupna poraba električne energije: 54 kVA Teža stroja: približno 14,4 t Potreba prostora: približno 8,0 x 5,6 x 2,8 m CNC – portalna rezkalna obdelovalna naprava DECKEL MAHO – DMF 260, nova zasnova - NC-rotacijska miza (A-os) - Delovni čas: 18.709 ur, čas delovanja vretena - Vgrajeno popolnoma obnovljeno vreteno (december 2023) - Zamenjana uravnotežena teža Z-osi (februar 2023) - Proizvodni paket - Dodatna možnost: vpenjalno orodje za pritrdilne vijake - BREZ vpenjalnih naprav!

Stanje: rabljeno, Količina: 4 kosi Proizvajalec: Cleco / Apex Tool Group Tip: mPro400GCD-P Napetost: 100–240 V AC ±10 % Frekvenca: 50 / 60 Hz Teža: 13,7 kg Dimenzije: 266,7 mm × 381 mm × 288 mm Nwsdezd N Ddspfx Anpon Kompatibilnost orodij: NeoTek 30 / 50 / 70, LiveWire, CellCore, CellTek, I-Wrench, serija 18 / 48, serija 17 / 47 / 67 Priključki: 1 × priključek za orodje NeoTek Priključki: 1 × priključek za orodje serije 18 / 48 Komunikacija: 2 × Ethernet RJ45 Komunikacija: 2 × RS-232 Komunikacija: 3 × USB 2.0 I/O: 8 vhodov / 8 izhodov (24 V optično izolirani) Sistemski vodilo: ARCnet / TSnet Pomnilnik: režo za CompactFlash Maksimalna dolžina kabla za orodje: 45 m

Leto izdelave: 2014, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), številka stroja/vozila: 6151656290, Desoutter Cordless Angle Shut-off Screwdriver ELS15-480-A Demonstration tool with 230 V charger + 2 batteries (18 V 2.6 Ah) No-load speed: 200 to 480 rpm Torque range: 5.0 to 15 Nm Drive: 3/8" square Length: 410 mm Weight without battery: 1.2 kg Nodpscr H Eaofx Anpjwn

Stanje: rabljeno, Electric dual screwdriver unit with automatic feed and pneumatic double-stroke mounted on handling device, handling system, manipulator for screwdriving technology Screwdriving unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double-stroke via Festo valves and cylinders. Additionally, various monitoring devices are installed for full automation. Screwdriver 1 consists of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Direct drive Screwdriver 2 consists of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Offset drive Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric Screwdriver Unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material no.: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gear unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight output Rexroth Type: 2GA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset output Rexroth Type: 2VNA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Ratio: 1 Weight: 0.6 kg Installation length: 153 mm Nwedpefx Hyfefx Anpjn Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Max. payload: 14 kg Handyflex outreach: 250 to 650 mm Handyflex outreach expanded: max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable payload - Adjustable stop for limiting the radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Blue steel pallet as base plate not included Blue steel base plate is not part of the delivery.

Leto izdelave: 2025, stanje: rabljeno, Letnik proizvodnje: 2025 Novo: Da Predvidena uporaba: Gradbeništvo Lastna teža: 917 kg Dimenzije tovornega prostora: 231 x 119 x 181 cm Nsdszylf Aopfx Anpswn Prostornina tovornega prostora: 3.000 l Serijska številka: DPX-31024 Za več informacij se obrnite na ekipo DPX.

Stanje: rabljeno, Electric dual screwdriving unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit features a pneumatic double stroke actuated via Festo valves and cylinders. Additionally, various monitoring devices are installed for complete automation. Technical data: Electric screwdriver torque: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Power consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Spacing between screwdriving tools: 73 mm - Equipped with a TORX Bit T27 or TP27 (presumably for M6 screws) - Requires a Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 each consist of the following components: Rexroth type Servo motor Rexroth type 0 Planetary gearbox Rexroth type 0 Encoder Rexroth type 0 Straight drive Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material no.: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Power consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive Rexroth Type: 2GA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 – 34 N Tool holder: 1/4" square Max torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A 7 m motor connection cable is included. Nwodpfx Aohxvu Ejnpon Overall dimensions (W x H x D): approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Leto izdelave: 2022, stanje: rabljeno, Letnik izdelave: 2022 Novo: Da Nwjdpfez N Rutsx Anpjn Lastna masa: 2.100 kg Dimenzije tovornega prostora: 606 x 244 x 259 cm Serijska številka: 1774685 Za več informacij se obrnite na ekipo DPX.

Stanje: rabljeno, Vibratory Feeder with Pneumatic Screwdriving Stand Eco Line Vibratory feeder, sorting device, bowl feeder, vibrating bowl, automatic screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl inner height: 70 mm Sorting rail width: 10 mm Mains connection: 230 Volt, 50 Hz Operating pressure: 6 bar (for separation and screws) Valve control voltage (pneumatics): 24 Volt - Stepless vibration speed controller = stepless conveying speed - Vibrating bowl in protective housing - with pneumatic feeding system Nedpfjxf Up Ujx Anpown - Feed pulse via external electrical control - The feeder was used for supplying M5 x 12 mm screws - Some pneumatic hoses need replacing - Siemens S7-200 PLC CPU 224 MISSING Space requirement vibrating bowl L x W x H: 450 x 450 x 315 mm Weight vibrating bowl: 32 kg Screwdriving Stand WEBER Eco Line Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screw holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screw guide diameter: Ø 37 mm Distance screw guide to table: 135 - 465 mm - 1 pc flat cylinder FESTO, type DZF-32-125-P-A-SM - 1 pc flat cylinder FESTO, type probably DZF-32-30-P-A-SM - Screw feed frame on linear guide - 3 position sensors on cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriving stand dimensions W x D x H: 200 x 410 x 1050 mm Weight screwdriving stand: 35 kg good condition Total weight vibrating feeder and screwdriving stand: 67 kg Note: The original Siemens S7-200 PLC CPU 224 is missing (see photo control cabinet without PLC), therefore, in this condition, no automatic sequence is possible. The controller also managed the sequence for screw separation and the screwdriver itself. The vibrating bowl is fully functional without the PLC, the integrated bowl controller does not require PLC control. Operation Principle: Fasteners are filled in bulk into the bowl and are conveyed upwards via mechanical vibration (micro-throw principle). The vibrating bowl is switched on or off automatically depending on the fill level of the screw magazine. The screw is then fed with compressed air through a plastic tube to the downstream device. The feed pulse for each screw comes externally from the downstream device.

Stanje: rabljeno, Pneumatic screwdriver, air screwdriver DESOUTTER Pneumatic screwdriver, inline screwdriver for screwdriving technology Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Air pressure requirement: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Selector switch for clockwise and counterclockwise rotation (rotary ring control) - Without automatic shut-off - Pneumatic control line Ø 4 mm - Air supply connection for screwdriver function min. Ø 10 mm Nwodpfx Anefgrrhepsn - Aluminium bracket for handling device - Screw feed Ø 12 mm (internal diameter) Dimensions L x W x H: 60 x 46 x 870 mm Weight: 2.8 kg Good condition 4 units available, price per screwdriver

Stanje: rabljeno, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal travel: 450 mm Vertical travel: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp - Movable along three axes (horizontal, vertical, rotatable) - Rotary encoder KÜBLER for rotational movement, type 8.5873.5320.B311.S003 - Linear position sensor BALLUFF for horizontal movement, type BTL6-A110-M0450-A1-S115 Nsdpfx Aofgpfmjnpjwn - 2 balancing units for vertical movement, CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - For weightless suspension of small devices - Load capacity adjustable in increments - Constant tensile force Required space (L x W x H): 770 x 310 x 1200 mm Net weight: 19 kg Good condition

Stanje: novo, - samodejno podajanje vijakov - samodejni izklop gibanja lijaka preko regulacije vleke Nwjdpfx Aoy Aiaxenpsn - avtomatski izklop globine - pnevmatski pogon in upravljanje - pnevmatsko izmetavanje vijakov in zasilna zaustavitev - nožno upravljanje - zaščitni okvir (varnostna naprava)

Stanje: rabljeno, Leto izdelave: 2011, x-way 835 mm y-way 510 mm z-way 510 mm Distance spindle nose to table 120 - 630 mm Control iTNC 530 ERGOLine Heidenhain Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Nwjdpfxex R Em Do Anpjn Max. torque 130 / 87 Nm Clamping surface of table 1,000 x 560 mm Max. table load 800 kg Number of T-slots 5 T-slots - width 14 mm T-slots - distance 100 mm Number of tool stations 20 pos. Max. tool diameter 80 mm Max. tool diam. with empty adjacent box 130 mm Max. tool length 250 mm Max. tool weight 6.0 kg Rapid traverse ( X / Y / Z ) 30 m/min Feed rate 1 - 20,000 mm/min Total power requirement 23 kVA Machine weight approx. 4.0 t Required space approx. 4.5 x 3.5 x 2.7 m CNC vertical machining centre DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Stanje: rabljeno, Leto izdelave: 2013, x-Weg 635 mm y-Weg 510 mm z-Weg 460 mm Steuerung Sinumerik 840 D SL Siemens Drehzahlbereich - Hauptspindel 20 - 10.000 min/-1 Antriebsleistung - Hauptspindel 13 / 9 kW Nsdoym Dz Rjpfx Anpswn Werkzeugaufnahme SK 40 DIN 69871 Max. Drehmoment 83 / 57 Nm Spannkraft 8 kN Tischaufspannfläche 790 x 560 mm Anzahl der T-Nuten 4 + 1 T-Nuten - Abstand 100 mm T-Nuten - Breite 4x 14H12 / 1x 14H7 mm max. Tischbelastung 600 kg Tischhöhe über Boden 720 mm Abstand Spindelnase und Tisch 120 - 580 mm Anzahl der Werkzeugplätze 30 pos. Max. Werkzeugbreite 80 / (130) mm max. Werkzeuglänge 250 mm max. Werkzeuggewicht 6 kg max. Gesamtgewicht 80 kg Wechselzeit Werkzeug - Werkzeug 1,6 sec Wechselzeit Span - Span 6,0 sec Eilgang 30 m/min Vorschubgeschwindigkeit 1 - 20.000 mm/min Vorschubkraft max. 5 kN Gesamtleistungsbedarf 28 kVA Maschinengewicht ca. 3,8 t Raumbedarf ca. 3,5 x 4,0 x 2,7 m CNC - Bearbeitungszentrum Vertikal DECKEL MAHO - DMC 635 V New Design - ShopMill - OHNE Lochplatte - OHNE Spannmittel - OHNE Werkzeuge

Stanje: rabljeno, Handling device, JÄGER HANDLING handling system Manipulator for screwdriving technology Model: Handy-flex 200 Horizontal movement: 300 mm Vertical movement: 370 mm Load capacity: 10 to 14 kg Reach: 250 to 550 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: Ø 26 mm oval with screw clamp - Moveable in three axes (horizontal, vertical, rotatable) - 1 piece TECHNA balancer for vertical movement, Type 9340, adjustment range 10 to 14 kg - Adjustable detent pawl for vertical movement, manual release via Bowden cable - For suspension of small devices in a weightless state - Adjustable load capacity - Constant traction force Nwedpfx Anefx Hxzjpon Required space (L x W x H): 880 x 500 x 1120 mm Net weight: 23 kg Good condition

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), 1 unit radial fan with extension shaft and cooling disc, suitable for warm and dusty air. Manufacturer: Scheuch GmbH Austria Model: vdk90 1000-fb14 Airflow: 71,060 m³/h Pressure increase: 1,673 Pascal at 250°C (0.637 kg/m³) Njdpfx Anokvpfhopjwn Speed: 1,460 rpm Shaft power: 40.5 kW Weight: kg Year of manufacture: 2007 Insulation with mineral wool and galvanized sheet metal. Dimensions: Length: 3,250 mm Width: 2,400 mm Height: 2,000 mm Inlet diameter: 750 / 980 mm Shaft height without spring buffer foot: Outlet dimensions: 980 x 780 mm Including compensator for outlet side. No damage or wear. Only the internal paint is affected by the heat.

Stanje: dober (rabljeno), Univerzalni vijačnik, vijačnik za gradbena dela, vijačnik, vijačnik za elektroniko, močan vijačnik, električni vijačnik - Nazivna moč: 400 W - Največja moč vijačenja: 10 mm - Napetost: 220 V Nwjdpfxefc Hfxe Anpen - Na voljo: 9 kosov univerzalnih vijačnikov - Cena: na kos - Dimenzije: 420/140/V80 mm - Teža: 4 kg/kos

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 433,94 kW (589,99 KM), prva registracija: 09/2024, vrsta goriva: dizel, velikost pnevmatike: 385/55R22.5+315/70R22.5, konfiguracija osi: 4x2, gorivo: dizel, zavore: retarder, barva: črn, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2024, Oprema: ABS, airbag, klimatska naprava, navigacijski sistem, parkirni grelec, računalnik na krovu, spojler, 🇬🇧SCANIA 590 S Super Smart Dash FULL AIR SUSPENSION 4+2 ⭕️BRAND NEW FROM FACTORY ⭕️IMMEDIATE AVAILABILITY -Full air suspension -Retarder -Delivery mileage -Stationary air conditioning -Navigation system -Digital dashboard -Leather interior -Rear-mounted batteries -Alloy wheels -Michelin tyres TAILORED FINANCING OR LEASING SOLUTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH - AUTHORISED DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30AM/7:00PM - SATURDAY 8:30AM/2:00PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL & INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer-Fridge Tank Semi-trailer – Lamberet - Schmitz Isuzu-Flatbed-Crane-Tipper-4 axle -4 Rear Axle -Tway-T-Way-540-460 HP - Xway-X-Way-Three-way tipper - V8 - Scania - Frost Edition Curtain Sider-Box body-Tail lift - Refrigerated box-Insulated with fridge - Van Njdpfeuq R Tgex Anpjwn Domenico Truck srl declines any responsibility for discrepancies regarding technical equipment, options and features, which may differ from those indicated in the description. We invite you to verify the specifications of each vehicle.

Leto izdelave: 2006, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Predstavljamo avtomatsko linijo za vstavljanje predalnih vodil, sestavljeno iz treh strojev in robota (trenutno v proizvodnji): BLA - B41, letnik 2006/2007 (Švedska) BLA - B28, letnik 2006 (Švedska) vijačnik 3RL, letnik 2018 (Litva) robot TEHNIČNE SPECIFIKACIJE Vstavljanje predalnih vodil Montažni stroj BLA-B41 – pozicija 1 Prehodni montažni stroj z omejevalnikom za pozicioniranje, namenjen za avtomatsko vijačenje predalnih vodil. Stroj je primeren za naslednje dimenzije materiala: Globina: 300–600 mm, servo-krmiljena nastavitev Višina: 400–1500 mm, servo-krmiljena nastavitev Debelina: 16 mm Dimenzije Dolžina stroja: 4100 mm Prehodna višina: 900 mm Vijačna oprema Vijačni nosilci, 2 kom., vsak opremljen z 2 vijačnikoma in ustreznim podajalnikom vijakov za vijake Ø6,3x13. Ustrezen vijak: tip 84 FSX Magazinske enote 2 magazinski enoti za leva predalna vodila 2 magazinski enoti za desna predalna vodila Vsak magazin vsebuje približno 40 predalnih vodil. Dolžina vodila: 450 mm, širina: 21,5 mm. Vmesni transportni trak TPB – pozicija 2 Poganjani valjčni transporter Skupna dolžina: 2150 mm Ostale značilnosti enake kot za poz. 3. Vmesni transportni trak TPB – pozicija 3 Poganjani valjčni transporter Nedpfx Aoy T Nfijnpjwn Skupna dolžina: 2450 mm Dolžina valja: 600 mm (620 mm v okviru transporterja) Razmik med valji: 150 mm Tip valja: Ø50 mm jeklo, prevlečeno s termoplastično gumo Hitrost: 0,78 m/s pri 50 Hz (frekvenčno krmiljeno) Višina: 900 mm Povratni transportni sistem TPT-US – pozicija 4 Stranski del s štirimi trakovi Hitrost: 0,5 m/s pri 50 Hz (frekvenčno krmiljeno) Poganjani valjčni transporter Skupna dolžina: 8900 mm Dolžina valja: 600 mm (620 mm v okviru transporterja) Razmik med valji: 150 mm Tip valja: Ø50 mm jeklo, prevlečeno s termoplastično gumo Hitrost: 0,5 m/s pri 50 Hz Višina: 900 mm Dodatne značilnosti Zvočni tlak: manj kot 70 dB(A) Električni priključki: Po načrtih električne napeljave Pnevmatski priključki: 0,63 MPa (6,3 bar), ½”

Stanje: dober (rabljeno), Univerzalni vijačnik, gradbeni vijačnik, vijačnik, elektronski vijačnik, močnostni vijačnik, elektro vijačnik - Nazivna moč: 600 W - Največja zmogljivost vijačenja: M8 - Hitrost vrtenja: 600/1800 obr/min - Priključek: 220 Voltov - Količina: 34 kosov univerzalnih vijačnikov na zalogi - Cena: na kos - Dimenzije: 320/200/V80 mm Nwodpfxefc Hfve Anpsn - Teža: 3,3 kg/kos

Stanje: novo, številka stroja/vozila: U398538, moč: 83 kW (112,85 KM), vrsta goriva: dizel, Leto izdelave: 2026 Lastna teža: 567 kg Znamka motorja: Perkins Dimenzije tovornega prostora: 126 x 73 x 96 cm Raven emisij: Stopnja IIIA / Tier IV začasno Število vrtljajev: 2200 Država proizvodnje: Združeno kraljestvo Njdpfx Ajv Tudrjnpjwn Za več informacij se obrnite na ekipo DPX.

Leto izdelave: 2020, stanje: novo, številka stroja/vozila: GALEN-RSC 200, Curb weight: 2,300 kg Nwodpfx Anen Tm Ibopjn Suitable for: Construction machinery Cargo space capacity: 1,500 l

Stanje: dober (rabljeno), Magazine screwdriver, drywall screwdriver, automatic screwdriver, automatic drill driver - Magazine screwdriver - 280 W 0-1100 rpm - comes with carrying case Njdpob A N Izsfx Anpjwn - Quantity: 4 screwdrivers available - Price: per piece - Dimensions: 515/285/H75 mm - Total weight: 6 kg/piece