Espec Podnebna Preskusna Komora nakup rabljenega (496)

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), CTS Model: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control: 32-bit controller LCD control panel Digital display of set and actual values Numeric entry of set values Clear-text error messages RS 232 interface Rcjdpsihb Amofx Af Tsb Free switching channels for customer-side test specimen control Temperature tests: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: With nitrogen inertization, the test chamber is initially purged with a large amount of N₂ until the oxygen content drops below 3%. Then it switches to a base flow (approx. 10% of the full purging amount). The baseline nitrogen flow is measured with a flow meter, displayed, and monitored via a limit switch. O₂ monitoring continuously extracts gas from the test chamber via a flame arrestor and channels it over an O₂ sensor to monitor the residual oxygen content in the extracted air. After measurement, the gas passes through a second flame arrestor back into the test chamber. The exhaust pump is monitored by a flow meter. Further details can be found in the user manual by Dräger in the appendix. Note: The gas system is currently out of service! The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test material, without radiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection rating: IP 54 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level:

Stanje: rabljeno, CTS Model: TS -70/600-13 Water-cooled Temperature Test Chamber Series: TS -70/600-13 Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for external test specimen control Test chamber volume: 600 liters Internal chamber dimensions: Height approx. 730 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 2250 mm, Width approx. 1300 mm, Depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from +120°C to -40°C Temperature deviation: ± 0.1K over time, ± 0.5 K spatially Electrical connection: 400V / 3-phase / N / PE Rated power: approx. 27.8 kW Rated current: approx. 44.1 A Compressors: 4TC-8.2Y / 4PC-10.2Y Refrigerants: R-404A / R-23 Weight: 1350 kg For your security as a buyer, the following information: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate Redpjvcyawofx Af Tocb 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we would be happy to answer them by phone.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber, Climate Chamber VLM 3068/S Air-cooled (top-loading test chambers for building materials) Control Panel The control panel is mounted on a console on top of the temperature test chamber. All control and operation commands can be triggered by simply touching the function symbols. The operating manual for the control panel is included. Main Switch The main switch is located at the front of the temperature test chamber. Air Treatment Chamber The air treatment chamber is located inside the test chamber and contains the assemblies necessary for temperature control. In the air treatment chamber, the air is conditioned (heated/cooled) and circulated by the test chamber fan. Air is drawn in through the center of the side wall and re-enters the test chamber via air duct panels located along the longitudinal sides. Feedthroughs The temperature test chamber can optionally be equipped with feedthroughs, allowing cables and test equipment to be introduced into the test chamber. Feedthroughs: front 2 x 82 mm Ø, rear 1 x 85 mm Ø Internal Dimensions: Width 2000 mm x Depth 570 mm x Height 600 mm External Dimensions: Width 3000 mm x Depth 870 mm x Height 1060 mm Technical Data: Mechanical loading data: Rjdperbiyfofx Af Tjcb Max. load for specimens/test material Test chamber floor (evenly distributed) 600 kg Point load 50 kg Temperature test data: Temperature range: -30°C to +125°C Temporal temperature deviation at center of working space: ±1 K Temperature change rate: Heating approx. 1 K/min Cooling approx. 2 K/min Operational data: Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 3 kW Rated current: 9 A Customer-side fuse: 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume: approx. 680 l Weight: approx. 700 kg Refrigerant: R-404A Noise level: Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors; all information is without guarantee!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), CTS CTS Climate Test Chamber Type: C -40/600 Air-cooled (converted to R-452a) Test chamber volume: 600 liters Temperature tests: Temperature range: -40°C to +180°C Temperature deviation: ±0.1 K / ±0.3 K over time (when equilibrated) Average rate of temperature change, without specimen and without heat input, Heating: 2.5 K/min Cooling: 3.0 K/min Maximum heat input: 2500 W at +20°C Climate tests: Climatic range / Technical data Temperature range: +10°C to +95°C Humidity range: 10% r.h. to 98% r.h. Dew point range I: +7°C to +94°C Dew point range II: –10°C to +7°C Stability values (over time): Humidity stability I: ±0.5% r.h. to ±1.5% r.h. Humidity stability II: ±1% r.h. to ±3% r.h. Temperature stability: ±0.1 K to ±0.3 K Rsdpfsw U Awmex Af Tscb Test chamber dimensions (H x W x D), approx.: 850 mm x 850 mm x 830 mm External dimensions (H x W x D), approx.: 1900 mm x 1115 mm x 1850 mm Refrigerant: R-452A Electrical connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your security as a buyer! The following steps are carried out on our chambers prior to delivery: 1. Functional inspection and exchange of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Specifications and data subject to change and error!) If you have any further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss climate test chamber. Water-cooled Test chamber lighting: halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation at chamber center: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C: 8,000 W Heat compensation at -20°C: 3,000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation at chamber center: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity fluctuation at chamber center: ± 1 to ± 3% RH Test chamber dimensions: Height 950 mm, Width 760 mm, Depth 650 mm External dimensions: Height 2025 mm, Width 1090 mm, Depth 2480 mm Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rcedpfx Aoq Dpzyof Teb Rated current: 24 A Rated power: 16.0 kW Refrigerant: R452A Weight: approx. 900 kg Type: WK-480/40/10 Important information for your security as buyer! The following points are completed on all chambers we offer, before delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in specifications!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Unit: Touchpanel All control and operating commands can be activated on the "Touchpanel" control unit by simply touching the function icons. Rcedpfx Aov Sr Hzef Tsb Adjustable Feet To compensate for floor unevenness and to ensure sufficient ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is fitted with feedthroughs on the right and left sides. These allow measuring cables and test fixtures to be routed into the test chamber. Feedthroughs installed as standard: R1: Nominal Width 125 mm L1: Nominal Width 85 mm Volume: 335 liters Test Chamber Internal Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for Temperature Tests: Minimum Temperature: –72°C Maximum Temperature: +180°C Temperature Deviation, over time: ± 0.1 to ± 0.5 K Temperature Uniformity, spatial: ± 0.5 to ± 1.5 K Temperature Change Rate, Cooling: 3 K/min Temperature Change Rate, Heating: 3 K/min Data for Climate Tests: Temperature Range: +10°C to +95°C Dew Point Range: -3°C to +94°C Humidity Range: 10 to 98% r.h. Temperature Deviation, over time: ± 0.1 to ± 0.3 K Temperature Uniformity, spatial: ± 0.5 to ± 1 K Humidity Deviation, over time: ± 1 to ± 3% r.h. Operating Data: Test Chamber Lighting: Halogen bulbs 2 x 24V, 50W Rated Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Current: 16 A Rated Power: 4.9 kW Circuit Breaker (on-site): 16 A slow-blow Refrigerant: R-452A/R23 Weight: approx. 585 kg For your security as the buyer, please note the following information! The following items are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and information reserved!) Feel free to contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), Weiss SC 1000/+20 IU Corrosion-Climate Alternating Test Chamber Weiss SC 1000/+20 JU Corrosion-Climate Alternating Test Chamber The test system combines a climate test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. In accelerated testing, susceptible metallic components are inspected for corrosion in accordance with relevant standards. Temperature Operating Range Temperature: +20 °C ... +60 °C temporal temperature deviation: ±0.5 K Climate Operating Range Temperature: +20 °C ... +60 °C temporal temperature deviation: ±0.5 K relative humidity: 10...98 % r.h. temporal humidity deviation: 3...5 % r.h. dew point: +12 °C ... +59 °C Salt Spray Test SS (temperature range: ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt mist via 2-substance nozzle, 1.5 x 0.5 m V80 cm³/h) Control Digital measuring and control system SIMCON/32*-Net with touch control panel Interfaces - serial interface RS 232 C - parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Climate mode - Salt spray test - Direct spraying with saline solution Rcedpfxsph U Dhs Af Tjb - Condensation water load - Rinsing of test chamber walls - Drying/ventilation of the test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measurement device tft’ (with forced humidification) Technical Data SC 1000/+20 JU Internal dimensions Height up to eaves approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including aggregate parts and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Maximum floor load 100 kg Brine storage tank approx. 200 l, with level monitoring, located separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connected load: 13 kW Weight: 1300 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Parker Engineering & Design navpični svetlobni modul Za testiranje sončnih oziroma fotonapetostnih modulov Preverjanje električne in mehanske varnosti Podpora pri razvoju izdelka, načrtovanju in kontroli kakovosti Zaznavanje morebitnih težav že med razvojem Kontrola kakovosti in varnosti Dolgotrajna testna postaja Nadzor temperature Premično na kolesih Žepki za viličarja 400 VAC, 3 faze, 50 AMP Redpfeh Rvh Sjx Af Tocb IR. 10.000 Amp Leto izdelave 2012 Teža 1400 kg Mere (V x Š x G): 2900 x 1700 x 1900 mm Možnost financiranja preko naše banke. komplett-konzept.leasingo.de Druge testne naprave – nove in rabljene – so na voljo v naši trgovini! Mednarodni stroški dostave na zahtevo!

Leto izdelave: 1990, stanje: dober (rabljeno), Weiss Temperature Test Chamber WT 11-18 KWP 500/40 Spring, summer, autumn, and winter – your products must withstand different temperatures during manufacturing, transport, storage, and use. Weiss Technik temperature test chambers help you test the influence of thermal conditions on the properties, function, and service life of your products. Manufacturer: Weiss Technik Model: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 liters Temperature range: -40°C to +180°C External dimensions: 110 cm wide, 173 cm deep, and 204 cm high Internal dimensions: 80 cm wide, 85 cm deep, and 85 cm high Pressure: 25 bar Rcodpfx Afeh Izh Ij Tjb Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used Complete plant closure, large selection of mezzanine floors, pallet racks, shelving units, paternosters. High-quality industrial machines, lathes, grinding machines, hand tools. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – both new and used – in our shop! International shipping costs on request!

Stanje: rabljeno, Hladilna/zamrzovalna komora -Zunanje mere: 3135 x 1385 x 2260 mm Rodpfx Afexqc Rke Tecb -Notranje mere: 2970 x 1225 x 2100 mm -Debelina panelov: 80 mm -Svetla širina vrat: 750 mm -Stenska hladilna enota vključena -Skladiščno stanje: 1 kos -Komora enostavna za montažo

Stanje: rabljeno, Hladilna/zamrzovalna komora Viessmann -Zunanje mere: 3300 x 2100 x 2450 mm -Notranje mere: 3100 x 1900 x 2250 mm -Deblina plošč: 100 mm -Svetla širina vrat: 800 mm -Tla iz nerjavečega jekla -Stenski hladilni agregat vključen -Stanje zaloge: 1 kos Rcedsxqpgrspfx Af Tsb -Komora enostavna za montažo

Stanje: dober (rabljeno), ESPEC Climate Test Chamber PL-3KPH Manufacturer: ESPEC Corp. Model: PL-3KPH Design: Air-cooled temperature and climate test chamber For sale is a used ESPEC climate test chamber for temperature and climate testing in research, development, quality assurance, and industrial applications. Technical Data: Test chamber volume: approx. 400 liters Temperature range: approx. -40 °C to +180 °C Humidity range: approx. 20% to 98% RH Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. current draw: approx. 11 A Weight: approx. 350 kg Cooling: air-cooled No external water connection required Refrigerant as per labelling: R452A – approx. 1.2 kg Features: Touchscreen control Program and constant operation modes Temperature and humidity operation Observation window in the door Stainless steel test chamber Interior illumination / chamber lamp Side cable/tube port Ø approx. 100 mm Overheat protection Integrated hour meter RS-232C interface Water tank system Specimen power supply control Time signal connection Condition: Used unit with age- and use-related wear. Some rust and corrosion present in the lower housing area. Interior with signs of use. See photos for optical condition. Scope of delivery: ESPEC climate test chamber PL-3KPH Shelf included Delivery as pictured Service: Redpfx Asy N Awqsf Tocb Functional check and replacement of necessary components Refilling with legally compliant refrigerant if required Leak test with certificate Documented test run Notes: Inspection possible by appointment. Loading can be organized. Commercial sale – sold without warranty. Subject to change and error.

Stanje: zelo dobro (rabljeno), ESPEC ARS-0680-AE Environmental Test System Model: ARS-0680-AE Manufacturer: ESPEC Design: Environmental Test System with external stainless steel test chamber For sale is a complete ESPEC Environmental Test System for temperature, climate, and automotive testing applications. The system consists of two ESPEC climate test chambers, model ARS-0680-AE, as well as an external stainless steel test chamber mounted on a mobile frame. The external stainless steel chamber serves as the actual test space for larger test specimens such as vehicle headlights, lighting modules, electronic components, or automotive assemblies. The two ESPEC climate chambers generate the required temperature and climate conditions for the external test cell. Condition / Display: Used system, optical condition as shown in the pictures. Both units display STOP / ready for operation status. Operating hours according to display: approx. 5,887 hours approx. 6,950 hours Special Features: Complete Environmental Test System with external stainless steel test chamber. Particularly suitable for complex testing tasks involving larger or externally connected specimens. Technical Data - Climate Test Chambers: 2x ESPEC ARS-0680-AE Years of manufacture: 2017 / 2018 Test chamber volume: approx. 680 liters each Temperature range: approx. -70°C to +180°C Humidity range: approx. 10% to 98% r.h. Temperature change rate: up to approx. 4–6 K/min Internal dimensions (W x H x D): approx. 850 x 1000 x 800 mm External dimensions (W x H x D): approx. 1050 x 1955 x 1805 mm Electrical Data: Connection: AC 400 V / 3~ / 50 Hz Max. current consumption: approx. 22–27 A Weight: approx. 505–615 kg per unit Cooling System: Air-cooled cascade refrigeration unit No external water connection required Refrigerants (according to type plates): R23 – 0.65 kg R452A – approx. 2.1 – 2.3 kg External Stainless Steel Test Chamber: External remote test chamber on mobile steel frame Large test area for bulky specimens Interior made of stainless steel Front opening with surrounding seal Multiple toggle latches Side feedthroughs / connection ports Removable shelf / test tray provided Heavy-duty casters Equipment: 2x ESPEC climate test chamber ARS-0680-AE External stainless steel test chamber Touchscreen operating panel Program and constant operation Temperature and humidity operation Observation window Stainless steel test chambers Interior lighting / chamber lamp Side pipe and cable ports Ethernet interface Specimen temperature input Power supply control for specimen Time signal outputs Water tank system for humidity operation Rjdey H H Uhepfx Af Tscb Mobile design Scope of Delivery: 2x ESPEC climate test chamber ARS-0680-AE 1x external stainless steel test chamber on mobile frame Available connection cables / accessories as present Available documentation as provided Scope of delivery as shown Note: This is a customer-specific special test system. The two ESPEC climate chambers and the external stainless steel test chamber belong together and are only offered as a complete system. Service / Preparation: Functional check and replacement of necessary components Refilling with legally compliant refrigerant (if required) Leakage test with certificate Documented test run Miscellaneous: Inspection by appointment possible Loading can be organized Commercial sale – sold without warranty. (Subject to change and error)

Stanje: zelo dobro (rabljeno), ESPEC Climate Test Chamber PL-3KPH Device Data Manufacturer: ESPEC Model: PL-3KPH Design: Climate Test Chamber Cooling: Air-cooled Description Used climate test chamber from ESPEC. Suitable for temperature and humidity testing. For use in research, development, and quality assurance. Operating Condition Display: STOP / ready for operation. Technical Data Temperature range: -40 °C to +180 °C Humidity range: 20% to 98% rH Test chamber volume: approx. 400 liters Dimensions Internal (W x H x D): 600 x 850 x 800 mm External (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerant: R404A / R23 Two-stage cooling system Air-cooled (no external water connection required) Weight Approx. 350 kg Features Touchscreen control panel Programmable and constant operation BTHC temperature and humidity control Observation window Stainless steel test chamber Rsdpfsy H H Iuex Af Tocb Interior lighting Cable port Overheat protection Hour meter Industrial design Scope of Delivery ESPEC Climate Test Chamber PL-3KPH Scope of delivery as shown Optional Pre-Delivery Service Functional testing Refrigerant service Leak test Test run with protocol Condition Used. Condition as per pictures. Note Used equipment, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized on request. Subject to prior sale and changes. If you have any questions, please contact us.

Stanje: rabljeno, Espec Model: TSD-100 100 litres usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range heating chamber: +60°C to +200°C Temperature range cooling chamber: -70°C to 0°C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Over-temperature protection Operating hours counter Mobile design Rcedpjxugq Aefx Af Tob 2 stainless steel specimen baskets Cable port Ø 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points are performed on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) If you have any further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Espec Type: PL-2KPH ESPEC PL-2 KPH Climate Chambers, Air-Cooled Rodpfsx Iu I Sjx Af Tjcb Temperature range: -40°C to +180°C Humidity range: approx. 10 to 98% RH Humidity fluctuation (temperature-dependent): ±2.5% RH over time ±3.0% RH Internal dimensions: Width 500 × Height 750 × Depth 600 mm External dimensions: Width 910 × Height 1590 × Depth 973 mm Microprocessor control with 10 preset international test standards and 20 freely programmable memory slots, plus integrated timer with automatic program start/stop and error code display, programming via touch screen. Alarm display (visual and acoustic) Device protection in case of over-temperature Over-temperature protection: 2 switching contacts Test chamber illumination Operating hours counter Test chamber capacity: 225 l Net weight: 300 kg Power supply: 400 V 3/N 50 Hz Plug: CEE 16 A, max. current consumption: 11.0 A Refrigerant: R404A Scope of delivery: Espec climate test chamber Important safety information for buyers! The following steps are carried out on all chambers offered by us beforehand: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Included in delivery: (see photo) (Specifications subject to change and errors reserved!) For further information, please contact us by phone.

Stanje: zelo dobro (rabljeno), Espec (ThermoTec) Stress Test Chamber Here we offer an Espec (ThermoTec) stress test chamber. External dimensions (W x H x D): 860 x 1795 x 1000 mm Test chamber dimensions (W x H x D): 355 x 355 x 426 mm 2 x 46 liters Voltage: 230 V 1/N 50 Hz Rcsdpfx Afopdm Uys Tob Rated current: 37A Fuses: 250 V, 2 x 3 A Type: EHS-221MD Temperature range: +105°C to +142.9°C Humidity range: 75% to 100% RH Temperature constancy: ±0.5 °C Pressure range: 0 to 2.0 kg/cm² Heating/pressure build-up time: from 0 to 2.0 kg/cm² in approximately 60 minutes Weight: 390 kg Condition: Used Scope of delivery: (See picture) (Subject to change and errors in technical data and specifications!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Espec Type: PHP - J3 Technical Data: Air-cooled Temperature and humidity range: Room temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Chamber volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Rcjdpfx Afjtzbzcs Teb Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate test chamber For your security as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Function test and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see image) (Changes and errors in the technical data and information reserved!) We would be happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Type: PHP - J3 Rcjdpfx Afetzbz As Tsb Technical Specifications: Air-cooled Temperature and humidity range: ambient temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Chamber volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3∅ 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate test chamber For your peace of mind as a buyer, please note the following information! The following procedures are carried out in advance on all our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak tightness test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Please feel free to contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), Espec Type: TPC - 212D Technical Specifications Test Method: HAST – Highly Accelerated Stress Test Model: Espec TPC-212D Rodpfewl D Aaox Af Tscb Internal Volume: 2x (approx. 22 liters) Internal Dimensions (ø x L mm): 2x 295 x 330 mm Temperature Range: +105 °C to +142.9 °C Humidity Range: 75% to 100% RH Pressure Range: 0.02 to 0.196 MPa overpressure (0 to 28 psig) Power Supply: 220 V (±5%) single-phase, 50/60 Hz, 20 A Special Features: Two chambers integrated in one unit Notes: Two Chambers: Allow for simultaneous testing with different parameters or increased testing volume. HAST Test: Accelerated lifetime testing under high temperature and humidity with overpressure for the qualification of electronic components. Applications: Ideal for semiconductors, ICs, PCBs, MEMS, etc. Weight: 230 kg Condition: Used Scope of Delivery: (See image) (Subject to modifications and errors in technical data. All information provided without liability!) Should you have any further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Espec Model: EGN28-6CWL Espec Temperature Water-Cooled Temperature Test Chamber N Series Power Supply: AC 400 V 3-phase 50/60Hz 38A Temperature Range: -70 to +180°C Temperature Change Rate: Heating 10 K/min Cooling 5.5 K/min Internal Dimensions (W x H x D in mm): 1000 x 1000 x 800 External Dimensions (W x H x D in mm): 1205 x 1920 x 2159 Usable Volume: 800 liters Refrigerant R-404A Rjdsuzva Uepfx Af Tscb Refrigerant R-508A Weight: approx. 695 kg Important safety information for you as a buyer! The following points are checked and performed in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak check with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Stanje: zelo dobro (rabljeno), Espec We are offering an Espec (ThermoTec) stress test chamber for sale. Overpressure humidity tests above 100°C in various modes Program capacity of 10 patterns, with 30 steps per pattern A range of safety features: Overheating/overpressure protection, water supply failure detection, complete door locking mechanism, and temperature sensor. Saturated temperature range: 105 to 142.9°C Unsaturated temperature range: 105 to 132.9°C Humidity range: 50 to 100% r.h. Nominal pressure: 0.196 MPa at 132.9°C and 100% relative humidity External dimensions: Width 740 x Height 1553 x Depth 1000 mm Rcedpfxjn Arzns Af Tsb Test chamber dimensions: Width 355 x Height 355 x Depth 426 mm Other features: - Equipped with rails and grids - Test item connections inside the chamber - Type: EHS-221M - Scope of delivery: see images Weight: 300 kg Condition: Used Scope of delivery: See images (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Espec Type: EGNX28-6CWL Espec Climate Test Chamber, Water-Cooled Climatic Test Chamber N Series Temperature range: -70 to +180°C Temperature change rate: Heating: 10 K/min Cooling: 5.5 K/min Humidity range: 10 to 95% RH according to diagram Internal dimensions (W x H x D in mm): 1000 x 1000 x 800 External dimensions (W x H x D in mm): 1205 x 1930 x 1960 Usable volume: 800 liters Cooling capacity: 3.6 kW at -50°C Heating system: 10 kW Refrigerant: R-404A Refrigerant: R-508A Power supply: AC 400 V, 3-phase, 50/60 Hz, 38A Weight: approx. 695 kg Important safety information for buyers: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Rjdpfx Afsv Duuxj Tjcb 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) Should you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), ENGLISH: Espec Type: TSA-202E-W Water-cooled thermal shock chamber Cold zone: -55°C to 0°C Hot zone: +50°C to 200°C System: Two-zone test via damper switching Temperature fluctuation: ±0.5°C Hot chamber: Heating time: Ambient temperature (20°C) to +200°C within 15 minutes. Cold chamber: Cooling time: Ambient temperature (20°C) to -55°C within 35 minutes. Temperature recovery: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz; 65 A Refrigerants: R404A 5 kg, R23 2.0 kg Weight: approx. 1200 kg Rcedpfx Aowc R A Iof Tob For your safety as a buyer, please note the following information! The following points are carried out in advance of delivery on our offered chambers: 1. Functional check and replacement of necessary components. 2. If necessary, refill with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and error!) We will be happy to answer any further questions by phone.

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: ENZ 6CAL, Oprema: CE označba, Rabljena, delujoča klimatska komora ESPEC ESX-2CA, zračno hlajena. Čeprav ima ta model funkcijo vlažnosti, je ta izklopljena, zato deluje le kot temperaturna komora, z razponom od -70°C do +150°C. Hitrost hlajenja je 4,0°C na minuto. Notranje dimenzije (Š, G, V): 500 mm, 600 mm, 750 mm. Komora je opremljena s kalibracijo. Rjdpfxewy Uq Rj Af Tocb