Epson G20-A01Sr Mit Rc180 nakup rabljenega (8.678)

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Chedoykub Aopfx Aqtjb Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. MYTHO EASY Low Very low-profile unit Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Additional demonstration units available from stock for immediate delivery. Chedex Ta Nxspfx Aqteb Prices ex stock Ludwigsburg.

Stanje: novo, Leto izdelave: 2025, Delivery every Monday and Tuesday - RELIABLE! Triple-segment bending machine with foot control EU production Folding bench with foot operation Segmented clamping beam, bottom beam, and bending beam - Precision-ground bending segments - Segments with triple guidance for easy and quick adjustment - Full-featured folding bench with foot control - Piano-type inserts in the upper, lower, and bending beams provide numerous bending possibilities - Upper beam, bottom beam, and bending beam all segmented (piano segments) - Segments are movable and removable - Precision-ground bending segments made from extremely tough and hard special alloy steel - Bending beam is effortless to operate due to a heavy-duty compression spring/damper system - Heavy-duty, robust construction for decades of operation - Easy, convenient opening and closing of the top beam Technical specifications: - Max. working width: 1,400 mm - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.5 mm - Weight: 295 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - All three beams equipped with segment jaws (fully segmented) - Stop for preset bending angles - Degree scale - Clearance: 100 mm Chedpfx Aqsc I T Txstob Transport rollers included. Nationwide shipping (Germany): €180 SCRIBING TEMPLATE FREE OF CHARGE! We issue invoices with 0% VAT (intra-community supply) as well as with 19% VAT. We look forward to your inquiry!

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 3.000 h, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018, including 3 network licenses for IGEMS software. Working area: 3000 x 1500 mm High-pressure pump Ecotron 40.37, year 2013 Water softening unit, year 2018 --> as new Abrasive backflushing system, year 2013 ABUS pillar jib crane, 2t, year 2018 --> as new Devo-Tech vacuum lifting system, load capacity 1800 kg --> as new Various accessories, several sandbags The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet unit and pump were completely overhauled by the supplier at the time. Unfortunately, the cutting unit has seen very little use in our facility. It was only operated for a few hours per year. It has not been used since around July 2025. The high-pressure pump has a defect. It is not sealing properly and is leaking water. Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, pump repair would cost approx. CHF 5,000.– to 6,000.–. The crane and vacuum lifting system can also be purchased separately. Please submit your offer with price expectations. The original new price for the crane and vacuum unit in 2019 was approx. CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Chsdpfx Aqeyq Rdyjtob Please send inquiries or offers by email only, not by phone.

Stanje: novo, For sale: ALU plates with certification from excess stock and remaining inventories. Specifications: - Designation: ALU / AlMg4.5Mn (5083) with certification -----2x----- Chjdpfxjw Skr Tj Aqtob - Aluminium rectangular plate / AlMg4.5Mn (5083) with certification - Length: 2205 mm - Width: 2504 mm - Height: 60 mm - Weight per plate: 911 kg - Purchase price per plate: €5,374.90 | €5.90/kg - Sales price per plate: €2,687 / negotiable -----2x----- - Aluminium rectangular plate / AlMg4.5Mn (5083) with certification - Length: 2205 mm - Width: 2504 mm - Height: 70 mm - Weight per plate: 1063 kg - Purchase price per plate: €6,271.70 | €5.90/kg - Sales price per plate: €2,687 / negotiable * All prices are net, plus VAT * The material comes from surplus stock and remnants and can also be sold individually. * IMPORTANT: Please note that, due to logistical reasons, we are currently only selling within Europe. This means that all purchases and transactions are restricted to customers located within this geographic region. *“The seller excludes any warranty for the goods sold. The goods are sold as-is, without any guarantee of suitability for a particular purpose or freedom from defects. The buyer confirms that they have inspected the goods prior to purchase and are satisfied with their condition. The seller assumes no liability for damages resulting from the use of the goods. Any claims of the buyer against the seller are excluded.”* Status: 11.04.2026 For questions or further information, I am available at any time.

Stanje: novo, Leto izdelave: 2025, PROD-MASZ sheet metal bending machines, folding benches, and guillotine shears utilize the precision of CNC technology. This range is designed for industrial use, ensuring every product stands out with exceptional durability and resilience—regardless of operating conditions. The specifications comply with strict technical standards and rigorous CE regulations, guaranteeing fulfillment of EU requirements as clear proof of the equipment’s quality. Additionally, the entire range is covered by a 12-month warranty. Versatile, powerful, heavy-duty, and extremely robust segmented bending brake—this is no ordinary folding machine, but a much stronger and sturdier construction. A segmented bending brake is characterized by full segmentation across the entire working length of 1.40 meters. Both upper and lower segments can be removed quickly and easily, and the bending beam is divided into segments. The bending angle ranges from 0 to 155 degrees. Clamping is done via foot pedal so your hands are free to position the sheet—open and close using the foot. The bending beam is equipped with two gas pressure springs, making operation exceptionally easy. A practical segmental toolbox is located at the rear of the machine. Technical data: - Maximum working width: 1400 mm Chsdpfjc Swhyox Aqtob - Maximum bending angle: 160 degrees - Maximum sheet thickness (steel): 1.5 mm - Weight: 300 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - All three beams are fitted with segment jaws (full segmentation) - Adjustable stop for preset bending angles - Degree scale Price: €5,700 Swivel castors included Delivery: Weekly Payment: Cash on delivery Delivery cost: €180 We look forward to hearing from you!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 1.200 h, Hochpräzise Advanced Thin Film Piezo (TFP) Technologie Extrem präzise Punktpositionierung für unvergleichliche Liniendetails und fotorealistische Druckqualität 1-Zoll breiter Druckkopf mit 720 Düsen pro Farbe Automatischer Wechsel zwischen zwei Schwarztinten – Photo Black und Matte Black Erzeugt variable Tropfengrößen ab 3,5 Pikoliter für stark verkürzte Druckzeiten bei gleichzeitig optimierter fotorealistischer Qualität Maximale Auflösung von 2880 x 1440 dpi für gestochen scharfen Text und präzise Strichzeichnungen Drucktechnologie: Epson MicroPiezo® Inkjet-Technologie Maximale Druckauflösung: Papier: 720 x 720 dpi Film: 1440 x 720 dpi Druckgeschwindigkeit: Bis zu 16 Fuß (5 m) pro Minute bei 720 x 720 dpi (auf Papier) Tintentyp: SurePress AQ Ink Farbpalette: Cyan, Magenta, Gelb, Schwarz, Grün, Orange, Weiß Tinten-Konfiguration: Epson Industriequalität, wasserbasierte, harzbeschichtete Pigmenttinte (SurePress AQ) Temperatur: Betrieb: 18° bis 28°C (64° bis 82°F) Luftfeuchtigkeit: Betrieb: 35–55 % (kondensationsfrei) Geräuschpegel: 75 dB oder weniger (ohne Alarmton) Abmessungen: 4.190 × 2.050 × 2.130 mm (B × T × H), entsprechend 13,75' × 6,73' × 6,99' Gewicht: 2.250 kg (4.960,4 lbs) Nachfüllvolumen der Tintenversorgung: 700 ml Haltbarkeit der Tinte: 2 Jahre ab Produktionsdatum oder 6 Monate nach Anbruch Stromversorgungsspannung: Nennwert +/- 10 % (180–220 V) Nennspannung: AC (Dreiphasensystem) 200 V Nennfrequenz: 50–60 Hz Nennstrom: Chjdpfx Asqrq Uyeqteb 30 A Eingangsfrequenzbereich: Nennwert +/- 1 %

Stanje: rabljeno, 7 Spannzangengrößen: 7-9-10-12-16-18-20 mm Chedpfx Aobn Rpieqtsb

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: URTE004902, S podporo Chodpfoyk E Slox Aqtob

Stanje: zelo dobro (rabljeno), Interroll Conveyor 0.99m with Drive The Interroll conveyor section is in very good condition. In addition, the conveyor comes with its own drive motor. Width: 400mm Length: 990mm Complete plant closure, large selection of mezzanine floors, pallet racks, shelving racks, and vertical carousels. High-quality industrial machinery, lathes, grinding machines, and hand tools. Codpshvmi Tjfx Aqtshb You can find more items – both new and used – in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area Heatsink + Front Wall Bracket, and 3.3 Assembly Area Front. (KK = Heatsink, SW = Front Wall Bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and PCB enters the dispensing area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), lifted off the belt and fixed in place. - Next, the x-y-z handling system moves the dispensing head to the specified location and starts the dispensing process. - After successful dispensing, the handling system moves into the park position and the WT is set back onto the belt. - The carrier is then conveyed to the Assembly Area Heatsink + Front Wall Bracket (provided there is no WT in the placement position). St.3.2: Assembly Area Heatsink + Front Wall Bracket - A WT moves from the dispensing area into the Assembly Area Heatsink + Front Wall Bracket via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), lifted off the belt, and fixed in place; at the same time, the chassis side walls of the partially assembled unit are aligned. - Simultaneously, the heatsink tray and front wall tray are positioned. - A stack of 12 heatsink trays and a stack of 12 front wall bracket trays are manually placed onto the respective infeed belts outside the safety enclosure. - The two safety interlocks are opened and the loaded tray stacks move into the gripping position of each stacker. - The safety interlocks close again. - The corresponding grippers pick up the respective tray. - The tray is separated and transported upwards with the stacker z-axis to above the actual pick-up height. - To center and stabilize the tray, a centering support is pushed and positioned underneath each tray by the x-handling system. - With the stacker z-axis, each tray is set onto its corresponding centering support. - The trays are now ready for component removal. - Using the multi-gripper on the SCARA robot, the heatsink (KK) is gripped from the tray and placed in an intermediate alignment position (to compensate for pickup inaccuracies and ensure a repeatable gripping position for assembly). - The heatsink is scanned, picked up again, and if the scanner result is OK, it is assembled onto the WT. - If not OK, the heatsink is placed in an NOK box. - The SCARA robot multi-gripper then picks up the front wall bracket (SW) from the tray and places it in the alignment position. - The front wall bracket is picked up again and assembled onto the WT. - Proceed to Assembly Area Front. Technical Data Model: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Cedpfx Aqoibx S Nstshb Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Allowable moment of inertia: nom. 0.02 kg*m², max. 0.25 kg*m² User cabling electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Ø outer: 25 mm Press-in force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting type: ceiling IP Protection class: IP20 Power and signal cables: 3m Financing through our bank is also possible. Complete offer at komplett-konzept.leasingo.de

Stanje: zelo dobro (rabljeno), EPSON robot Chsdpfx Aqohx Rg Iotsb G6-451S RC180 controller Robot

Stanje: zelo dobro (rabljeno), Širokoformatni inkjet tiskalnik Epson T 7200D Barve: Photo Black, Matte Black, Cyan, Yellow, Magenta Minimalna velikost kapljice: 3,5 pl, z variabilno tehnologijo velikosti kapljic Konfiguracija šob: 720 šob za črno, 720 šob na barvo Csdpfjgzrh Tex Aqtjhb Ločljivost tiskanja: 2.880 x 1.440 DPI Kot izkušen prodajalec rabljenih kopirnih strojev smo razvili pravo strokovno znanje pri pakiranju in paletni odpremi, da zagotovimo, da naše stranke prejmejo stroje v brezhibnem stanju. Kopirne stroje pošiljamo izključno iz zalog podjetja Konica Minolta France, kjer so jih tudi vzdrževali. Naše podjetje nudi najširšo ponudbo produkcijskih kopirnih strojev Konica Minolta in na zahtevo omogoča dostavo po vsem svetu.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 85-70, Samočistilni nadpasovni magnet z ogrodjem. Primeren za širino transportnega traku 1200 mm. Delovna dolžina 1470 mm x delovna širina 645 mm. Codpjx Tid Esfx Aqtehb

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, obratovalne ure: 6.170 h, nosilnost: 3.000 kg, dvižna višina: 7.000 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 2.440 mm, moč: 70 kW (95,17 KM), lastna masa: 6.900 kg, skupna dolžina: 5.000 mm, vrsta pogona: Diesel, gradbena širina: 2.200 mm, Teleskopski viličar, fiksna konstrukcija Vrsta masta: teleskopski Stanje: pripravljen za uporabo in v celoti delujoč Tehnično stanje: dobro Sprednje pnevmatike, tip: zračne Stanje sprednjih pnevmatik: 0–20 % Zadnje pnevmatike, tip: zračne Stanje zadnjih pnevmatik: 0–20 % Codpfozx Iq Sox Aqtshb Opis: Teleskopski viličar JCB 530-70 – – – leto izdelave 2001 – – 7 m doseg – – 3 tone nosilnosti – – – štirikolesni volan – – štirikolesni pogon – – 3 načini upravljanja – – mehanski hitri menjalnik – – – štirivaljni dizelski motor Perkins (95 KM) – – pnevmatike niso v dobrem stanju – – vetrobransko steklo ima razpoko – – – a sicer je stanje dobro – – vključno z rabljenimi paletnimi vilicami + rabljenim nakladalcem (2,2 m širine) Nakladalec za sipke materiale, dvojne paletne vilice, 3. ventil, grelec, zaprta kabina.

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 8.760 h, Vehicle Description Crawler Excavator TAKEUCHI TB 2150 Year: 2017 According to hour meter: 8,760 hours 85 kW 15,075 kg - Hydraulic quick coupler - Digging bucket - New ditch cleaning bucket - Hydraulic swing boom - Hydraulic quick coupler - Hydraulic dozer blade - Electric refueling pump - Immediately ready for operation - 270 cm operating width Asking price: €54,900 net Cedpfxeugf U Ae Aqtehb Affordable delivery available!

Stanje: rabljeno, prevoženi kilometri: 695.423 km, moč: 184 kW (250,17 KM), prva registracija: 08/2007, vrsta goriva: dizel, lastna masa: 7.180 kg, največja dovoljena obremenitev: 7.745 kg, skupna masa: 15.000 kg, velikost pnevmatike: 285/70 R19,5, konfiguracija osi: 2 osi, medosna razdalja: 4.800 mm, zavore: zaviranje z motorjem, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 4, vzmetenje: jeklo-zrak, število sedežev: 2, Oprema: ABS, centralno zaklepanje, registracija tovornjaka, tempomat, zapora diferenciala, | DAF LF 55.250 tovornjak | Palfinger PBS-1500 dvižna platforma, nosilnost 1500 kg | EURO 4 | Odkrivno strešno okno | električna okna, električna ogledala | Ročno menjalnik | Tempomat | Zavora za motor | Orodjarna | Pridržujemo si pravico do spremembe cen, napak pri vnosu podatkov in predčasne prodaje. Cedszm I N Depfx Aqtjhb

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 62 kW (84,30 KM), vrsta goriva: dizel, lastna masa: 7.100 kg, Leto izdelave: 2005, obratovalne ure: 2.818 h, Oprema: klimatska naprava, VALJAR ATLAS AW1070 Cjdpszvwt Dofx Aqtjhb Letnik: 2005 Po merilniku: 2.818 ur 7.100 kg 62 kW motor Perkins - 170 cm širina valja - Zaprta kabina z ogrevanjem in klimatsko napravo - Originalna barva - Takoj pripravljen za uporabo Prodajna cena: 23.500,00 EUR (neto) Možna je tudi ugodna dostava!

Stanje: rabljeno, lastna masa: 3.000 kg, skupna dolžina: 2.900 mm, dvižna višina: 5.500 mm, tip droga: triplex, gradbena višina: 2.900 mm, širina nosilnega okvirja vilic: 2.015 mm, nosilnost: 10.000 kg, Triplex Razred ISO: Razred ISO 4 = 5.000 – 10.000 kg Vrsta dvižnega stolpa: Triplex Opis: Dvižni stolp DOOSAN – TRIPLEX-dvižni stolp s prosto dvigovanje, stranskim premikom in nastavljivimi vilicami – višina 2,90 m – višina dviga približno 5,5 m – dvižna zmogljivost 10 ton – širina nosilca vilic 2,15 m – dolžina vilic 1,80 m – s 3-točkovnim priključkom – lastna teža približno 3 tone – starost približno 10 let – možna dostava! Chedpfjzvtzwsx Aqtsb

Stanje: rabljeno, lastna masa: 2.900 kg, največja dovoljena obremenitev: 15.100 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2011, vzmetenje: zrak, velikost pnevmatike: 445/45/R19.5, medosna razdalja: 5.040 mm, Oprema: ABS, | Kögel izmenljivo podvozje AWE 18 | Zračna vzmetitev | Lastna teža 2.900 kg, nosilnost 15.100 kg | Pnevmatike: 445/45/R19.5 | avstrijsko vozilo | Izmenljiva platforma | Krone WP 7LF1 | Prazna teža: 2.120 kg | Dovoljena skupna teža: 15.000 kg | Pridržujemo si pravico do sprememb, napak pri vnosu podatkov in predprodaje. Cjdpfx Aezw Rkrjqtjhb

Stanje: rabljeno, prevoženi kilometri: 676.738 km, moč: 552 kW (750,51 KM), prva registracija: 09/2016, vrsta goriva: dizel, lastna masa: 15.500 kg, največja dovoljena obremenitev: 10.425 kg, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, medosna razdalja: 4.600 mm, naslednji pregled (TÜV): 09/2026, zavore: retarder, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: zrak, število sedežev: 2, dolžina tovornega prostora: 5.100 mm, velikost sprednje pnevmatike: 385/65/R22.5, velikost zadnje pnevmatike: 315/80/R22.5, največja hitrost: 90 km/h, število postelj: 1, Oprema: ABS, jeklene gosenice, kabina, klimatska naprava, računalnik na krovu, registracija tovornjaka, tempomat, zapora diferenciala, zavorni sistem na stisnjen zrak, žerjav, | VOLVO FH 16 s Penz 12Z dvigalom, letnik 2016 | Dvojni teleskopski dvigalo (2 izvleki) | Retarder | Avtomatik, EURO6 | Klima, multifunkcijski volan, tempomat | Potovalni računalnik | Vlečna kljuka | Lastna teža: 15.500 kg | Dolžina nakladalne površine za les: 5,10 m | Pridržujemo si pravico do napak in predhodne prodaje. Chjdpfxoy U Eb Ns Aqteb

Stanje: rabljeno, prevoženi kilometri: 100.000 km, prva registracija: 10/2017, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: srebrn, skupna širina: 2.550 mm, Leto izdelave: 2017, * pokličite (Kontakt · Telefon · Mobilni · WhatsApp) Cedewbmuqjpfx Aqtshb * Empl povratna korita * + sedelna plošča * + rezervoar za olje * s pomožnim okvirjem * Lastna teža: 13.400 kg * Skupna teža: 26.000 kg * Nosilnost: 12.525 kg * Dolžina: 7.100 mm * Širina: 2.550 mm * Letnik izdelave: 2017 * Neto cena

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), številka stroja/vozila: 002689 / 002688, Technical Data Manufacturer: Wenzel Model: RA1624 Triplex with sub-floor configuration Year of manufacture: 2000 Double-column CMM with additional sub-floor measuring arm Serial number: 002689 / 002688 Measuring Range X = 6500 mm Y = 1600 / 1600 mm Z = 2500 mm Probing System Software: Metrosoft CM SP2 3 x Wenzel WPC 2010 Renishaw PHC10-2 probe head controller 2 x Renishaw PHS heads with different probe lengths The machine can be retrofit with new accessories according to customer requirements. Price: on request! Chsdpfegm Tyiox Aqtjb Assembly and commissioning available! We are happy to prepare a detailed offer for you. Note: Our offer is directed exclusively at professional customers. (Subject to changes and errors in technical data, specifications, and pricing, as well as prior sale!)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.970 kg, največja dovoljena obremenitev: 15.030 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2019, naslednji pregled (TÜV): 08/2026, vzmetenje: zrak, velikost pnevmatike: 445/45R19,5, največja hitrost: 125 km/h, Oprema: ABS, NEMŠKI TRGOVEC ponuja: Chsdpfx Aqezyl Ikotsb urejene prikolice s širokimi pnevmatikami na voljo več kosov 445/45R19,5 vlečna oj za vzdolžno nastavitev eos BPW disk zavore dolgi zračni mehi dvižna višina do 1420 mm vsi z veljavnim tehničnim pregledom in varnostnim pregledom zelo dobre pnevmatike leto izdelave 2019 18000 kg skupne dovoljene mase 2970 kg prazne mase Velika zaloga prikolic in zamenljivih zabojnikov! ##### POKLIČITE - BREZ E-POŠTE! ##### DOSTAVA MOŽNA PO CELI NEMČIJI! MEPO-NUTZFAHRZEUGE DOBAVLJA OD LETA 1983! OGLED SAMO PO DOGOVORU! #####

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 7.097 h, nosilnost: 2.500 kg, dvižna višina: 6.000 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 1.900 mm, moč: 55 kW (74,78 KM), lastna masa: 4.500 kg, skupna dolžina: 4.000 mm, vrsta pogona: Diesel, gradbena širina: 1.800 mm, Teleskopski viličar, fiksna konstrukcija Tip masta: Teleskopski Chjdpfx Aezuh Nmoqtjb Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Sprednje pnevmatike, tip: Zračne Stanje sprednjih pnevmatik: nove Zadnje pnevmatike, tip: Zračne Stanje zadnjih pnevmatik: 40–60 % Opis: Teleskopski viličar MANITOU MT 625 (serija ST3B) – – Nosilnost 2,5 tone – – – Doseg 6 m – – – Letnik 2015 – – – 7097 delovnih ur po merilniku – – – 2-stopenjski hidrostatični pogon – – – mehanski sistem za hitro menjavo – – – 4-valjni dizelski motor KUBOTA TURBO, 75 KM – – – štirikolesni volan – – – štirikolesni pogon – – – 3 načini vožnje – – – lastna teža 4500 kg – – – višina 1,9 m – – – širina 1,80 m – – – dolžina 4 m – – – Sprednje pnevmatike NOVE, zadnje približno 50 % – – – Vključno z rabljeno paletno vilico – – – zelo okreten viličar – – Teleskopski viličar v dobrem stanju – – – NOVA LOPATA je na voljo za doplačilo!! – – – Ogledujte si in preizkusite – – Vključno s potrdilom o skladnosti CE (Izjava o skladnosti ES) + navodili za uporabo – – – Dostava je možna. Sistem za hitro menjavo, 3. ventil, 4. ventil, delovna luč spredaj, ogrevanje, popolna kabina, certifikat CE.