Durendus Stiskalnica Z Drsno Mizo nakup rabljenega (48.338)

Leto izdelave: 1961, stanje: pripravljen za uporabo (rabljen), Na voljo je hidravlična enostebrna C-okvirna stiskalnica Müller. Pritisna sila: 63 t, hod: 560 mm, izpust: 325 mm, vgradna višina: 700 mm, dimenzije mize X/Y: 640 mm/640 mm, površina bata: 560 mm/560 mm, dimenzije stroja X/Y/Z: cca 2000 mm/1200 mm/3100 mm, teža: cca 7500 kg. Stroj ima okvaro motorja. Ogled na lokaciji je možen. Ppodpfxey Rtg Ee Aa Dot

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 30.408 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.250 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 550 kg, skupna masa: 16.000 kg, kapaciteta rezervoarja za olje: 600 l, moč: 22 kW (29,91 KM), leto zadnje generalne obnove: 2025, volumenski pretok: 530 m³/h, Technical Data - Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales pressed: 198,059 pieces (as of April) Main press force: 50 t Specific press force: 63 N/cm² Theoretical throughput capacity: 530 m³/hour Throughput capacity under operating conditions: 260 m³/hour Feed opening dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying system: 5-fold vertical, fully automatic Throughput rates at bulk density of 30 kg/m³: 6 to 7 t/h 50 kg/m³: 7 to 9 t/h 100 kg/m³: 11 to 14 t/h Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank volume: 600 L PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the baler: The machine has undergone partial refurbishment and general maintenance in our workshop. After completion of the refurbishment, the baler was tested in operational mode and is available for sale at short notice. The following refurbishment work was carried out: General work: - Machine cleaned, derusted, primed, partially repainted - Wire run-in marks at the channel passes welded and smoothed Hydraulic unit: - Hydraulic oil tank completely drained, tank cleaned, new oil filled - Oil and air filters replaced - Leaking oil sight glass on hydraulic tank replaced - All hydraulic hoses replaced Electrics: - Language in program menu set to English - Two key switches on control panel replaced - Control cabinet replaced - Indicator lamp on control cabinet replaced - Flap limit switch replaced - Whirlator electrics replaced, connected, and tested Ppedpfx Asy R Npiea Dot Press ram: - All four press ram rollers removed and replaced - Main hydraulic cylinder disassembled, serviced, and partially overhauled; cylinder tube honed, complete seal kit replaced, leak test carried out - All plastic wear pads on press ram replaced Pre-press flap: - Both bearings on pre-press shaft replaced - Both hydraulic cylinders disassembled, serviced, and partially overhauled; both cylinder tubes honed, complete seal kits replaced, leak test carried out - Scraper flap on pre-press replaced Tying unit: - Two complete needles with wire deflection rollers replaced - Needles adjusted and set - All wire guide rollers in needle heads replaced - Twister finger replaced - Two twister shafts replaced - All 8 wear plates on drillomat, below the twister fingers, replaced Scope of delivery: Only the baler is sold. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection is possible by appointment. No liability is accepted for technical data or possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2003, ELB Rotary 40 NC-K okrogla ploščinska brusilka s premerom mize 400 mm, višina brušenja 300 mm, leto izdelave 2003, upravljanje ELN NC-K, moč vretena 4 kW, brusilni disk 300 x 50 x 76,2 mm, vrtljiva miza z magnetno vpenjalno ploščo premera 400 mm, popolna ohišje, hladilni sistem s papirnatim tračnim filtrom, možno preizkusiti pod napetostjo, z veseljem prevzamemo tudi postavitev/usposabljanje ter kasnejši servis na lokaciji! Financiranje/leasing, ni problema, z veseljem pripravimo ponudbo! Pedpfxouiafus Aa Dept

Stanje: novo, Leto izdelave: 2026, Brusno območje 1000 x 450 mm, premer rotirajoče mize 1000 mm, brusni disk 400 x 100 x 127 mm, moč vretena 11 kW z regulacijo števila vrtljajev, elektro-permanentna magnetna vpenjalna plošča s premerom 1000 mm in regulacijo sile zadrževanja, avtomatski obleki nameščen na vretenasto glavo, vključno s kompenzacijo obsega brušenja, hladilni sistem s filtrom iz papirnatega traku, uporabniku prijazno upravljanje z Mitsubishi SPS krmiljenjem, alternativno SIEMENS 828 CNC krmiljenje, nov stroj z 12-mesečno garancijo, najvišja natančnost po neprekosljivem razmerju med ceno in zmogljivostjo. Na našem razstavnem stroju lahko izvedemo tudi brušenje po želji. Poskrbimo za montažo in izobraževanje na vaši lokaciji ter kasnejši servis. Financiranje/leasing ni problem, z veseljem pripravimo ponudbo! Podoh I Tz Sspfx Aa Djpt

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, moč: 38 kW (51,67 KM), hod: 400 mm, širina mize: 1.320 mm, dolžina mize: 1.000 mm, skupna višina: 6.300 mm, razdalja med stojali: 1.000 mm, nastavitev hidravličnega cilindra: 200 mm, Тримерова преса с натиск 400 тона ERFURT, Германия, модел PKZ 400 Pedpfx Aolnlpxsa Dopt

Stanje: dober (rabljeno), table press with hydraulic unit Ppedpfx Ajk Adfnea Dot

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Naprodaj mobilni ventilni stroj za obdelavo / struženje Unigrind FDA 500. Stroj je rabljen, v dobrem stanju in popolnoma delujoč. Možen ogled in testiranje na lokaciji. Unigrind FDA 500 je namenjen obdelavi in popravilu tesnilnih površin, sedežev ter prirobnic ventilov. Omogoča natančno struženje, rezkanje ter obnovo površin neposredno na delovišču. Podpfey R R Imsx Aa Dspt Specifikacija: Model: Unigrind FDA 500 Leto: 2013 Mobilni stroj za obdelavo ventilov Za popravilo ventilov, prirobnic in tesnilnih površin Natančna obdelava ravnih in stožčastih površin Primeren za različne vrste industrijskih ventilov Kompaktna in robustna konstrukcija Profesionalna industrijska oprema Nemška kakovost Več informacij: Unigrind FDA 500 Primeren za podjetja v energetiki, naftni, plinski, kemični in industrijski panogi ter servisne delavnice. Za dodatna vprašanja z veseljem odgovorimo.

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Naprodaj je stacionarna brusilna / lapirna miza za ravne površine Unigrind KSM600. Oprema je v dobrem stanju in popolnoma delujoča. Možen je ogled in preizkus na lokaciji. Psdpjy R Rl Sefx Aa Dept Unigrind KSM600 je namenjen brušenju in lapiranju tesnilnih površin. Primeren za obdelavo in obnovo površin ventilov, loput, prirobnic ter drugih industrijskih komponent. Specifikacija: Model: Unigrind KSM600 Stacionarna brusilna / lapirna miza za ravne površine Za obdelavo ravnih tesnilnih površin Primeren za popravilo ventilov, loput in prirobnic Robustno industrijsko ohišje Stabilna in natančna obdelava Enostavno in udobno upravljanje Profesionalna industrijska naprava Več informacij: Unigrind KSM600 Primerno za servisne delavnice, energetiko, naftno, plinsko in industrijsko dejavnost. Za dodatna vprašanja smo vam z veseljem na voljo.

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope forming attached to the frame for pallet reinforcement TECHNICAL DETAILS: Low-profile turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, up and down Audible signal at cycle start and stop Emergency stop button in accordance with CE regulations Turntable always stops at same home position Carriage anti-fall safety device Push buttons for machine on/off, start/stop & reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F00 - Display/program change lock F02 - Infinitely adjustable turntable speed, 5–12 rpm Carriage speed up and down adjustable independently F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10) F06 - Number of wraps at pallet top (1–10) F09 - Delay on photocell for wrapping height F13–F16 - Film tension (base/top wraps and up/downwards) independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS 6 storable wrapping programs F01-1 - Cross wrapping (up/down) F01-2 - Simple wrap (up only or down only) F01-3 - Push button for manual functions F10/F11 - Wrapping cycle with predefined start and stop height Pedpfx Aaeykucmo Dept F12 - Wrapping to preset height (with photocell deactivated) F22/F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application F30/F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set at 200% Film tension electronically controlled through control unit Film specification: max. outer diameter Ø250 mm, height = 500 mm, core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratios of 150% / 250% / 300% available Further units available from stock in Ludwigsburg.

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. MYTHO EASY Low Very low-profile unit Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg Podpfxex Ta Nxj Aa Dept PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Additional demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) Pedpfsykud Rox Aa Dspt ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) Ppjdpfxeyktrtj Aa Det ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow05, Exhibition machine, like new. Ppodoykuiaepfx Aa Dot SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm in length TECHNICAL DETAILS: Turntable, LOW PROFILE · Height: 25 mm · Maximum pallet dimensions: 1000 x 1200 mm · Maximum load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection by light sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable for upward/downward movement Signal tone at wrap start and end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power on, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Infinitely variable turntable speed: 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward: 1.3 to 5.4 m/min F04 – Carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor delay for wrapping height F13–F16 – Film tension for foot & head wrapping / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (upward/downward) F01-2 – Simple wrapping (up only or down only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop height F12 – Wrapping to a preset height (deactivates light sensor height detection) F22/F23 – Wrapping cycle for top sheet film F29 – Soft-start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle by push button FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% available Additional units available from stock in Ludwigsburg.

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, dolžina transportnega traku: 1.760 mm, širina transportnega traku: 730 mm, hitrost transportnega traku: 180 mm/s, skupna dolžina: 2.000 mm, skupna višina: 1.000 mm, skupna masa: 150 kg, vhodna frekvenca: 50 Hz, proizvajalec motorjev: WEG, Oprema: nujno zaustavitev, TAF-Številka artikla: 1000006117 Proizvajalec: Herzog + Heymann Letnik izdelave: 2007 Skupne dimenzije (D x Š x V) v mm: 2.000 x 960 x 530 mm Širina z bočno ploščo v mm: 820 Širina z pogonom v mm: 820 Višina bočnica v mm: 80 Transportna dolžina v mm: 1.760 Transportna širina v mm: 730 Tip traku: gladek, moder Širina traku v mm: 730 Podkonstrukcija: vključena, dvižna podkonstrukcija (V: pribl. 530 - 1.000 mm) Drsna površina: les Pogon: glavni pogon Tip motorja: motor z zobniškim prenosom Proizvajalec motorja: WEG Motorni podatki: 150 W / 50 Hz / 22 vrt/min Položaj motorja (v smeri transporta): levo Hitrost transporta v m/s: 0,025 - 0,18 Ppodpfx Aajy D T Ddo Det Neto teža v kg: 150 Posebnosti: ročno nastavljiva višina, brezstopenjski regulator hitrosti, izklop v sili, premičen, vključno z vtikačem CEE 16A Stanje: rabljeno / popolnoma funkcionalno Funkcijski preizkus: OK

Stanje: rabljeno, Leto izdelave: 2000, stiskalna sila: 260 t, hod: 250 mm, širina mize: 840 mm, dolžina mize: 1.500 mm, zračni tlak: 9,807 letvica, priključek za stisnjen zrak: 9,807 letvica, nastavitev hidravličnega cilindra: 120 mm, Ponujamo rabljeno ekscentrično stiskalnico Chin Fong OCP-260N z dvojnim stebrom, letnik 2000. Model: OCP-260N Tovarniška številka: A00373 Letnik: 2000-11 Kapaciteta: 260 ton Frekvenca hoda: 20 – 40 hodov/min Hod: 250 mm Največja višina orodja: 500 mm Zračnost zgornjega udarca: 7 mm Nastavljiv razpon plošče: 120 mm Površina zgornje plošče (D × Š): 1130 × 700 mm Površina spodnje plošče (D × Š): 1500 × 840 mm Moč glavnega motorja: 22 kW Število polov: 4 Teža stroja: 31,8 ton Tlak stisnjenega zraka: 9,807 bar Temp. olja maks.: +100 °C Temp. olja min.: -10 °C Prostornina olja: 180 litrov Za vsa vprašanja ali dodatne informacije nam pošljite sporočilo ali nas pokličite. Pjdpsykbcmofx Aa Dspt

Stanje: dober (rabljeno), Leto izdelave: 1981, številka stroja/vozila: 055-014-19, Ponudba 25275 Tehnični podatki: - Maks. stisna sila: 25 t - Maks. hod bata: 500 mm - Hitrost hoda: 200 mm/s - Hitrost vračanja: 450 mm/s - Vgradna višina: 800 mm - Izmik do sredine bata: 380 mm - Površina vpenjanja bata: 440 x 360 mm - Vpenjalni zatič bata: 40 mm - Dimenzija mize: 630 x 500 mm - Preboj/odprtina mize: 180 mm – E. nožni pedal - 2 dvoročna upravljalna konzola - Pogon: 400 V / 12,5 kW Pedey Ew Szspfx Aa Djpt - Potrebni prostor cca.: Š 800 x V 2750 x G 1150 mm - Teža cca.: 2200 kg

Stanje: dober (rabljeno), Leto izdelave: 1982, številka stroja/vozila: 055-013-15, Ponudba 25274 Tehnični podatki: - Maks. stiskalna sila: 25 t - Maks. hod bata: 500 mm - Hitrost hoda: 200 mm/s - Povratni hod: 450 mm/s - Vgradna višina: 800 mm - Previs do sredine bata: 380 mm Podpey Ewx Uefx Aa Dopt - Površina za vpenjanje bata: 440 x 360 mm - Vpenjalni zatič bata: 40 mm - Velikost mize: 630 x 500 mm - Vrtina mize / preboj: 180 mm - Vlečna blazina: 10 t - Elekt. nožno stikalo - 2-ročna upravljalna konzola - Pogon: 400 V / 12,5 kW - Potrebni prostor pribl.: Š 800 x V 2750 x G 1150 mm - Teža pribl.: 2400 kg

Stanje: dober (rabljeno), Leto izdelave: 1984, številka stroja/vozila: 054-008-212, Ponudba 25272 Tehnični podatki: Ppjdpfx Aaoy Ewtrj Dst - največja stiskalna sila: 25 t - največji hod bata: 500 mm - hitrost hoda: 0 - 2,4 m/min - povratni hod: 0 - 12 m/min - vgradna višina: 800 mm - izseg do sredine bata: 360 mm - vpenjalna površina bata: 440 x 360 mm - vpenjalni zatič bata: 40 mm - dimenzija mize: 630 x 500 mm - odprtina mize / preboj: 180 mm - električno nožno stikalo - dvoročno upravljalno konzolo - pogon: 400 V / 8,75 kW - potrebni prostori približno: Š 800 x V 2750 x G 1150 mm - teža pribl. 2000 kg

Stanje: rabljeno, Leto izdelave: 1964, številka stroja/vozila: 64 / 39.9037 / 2, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 1.200 t, hod: 600 mm, širina mize: 4.500 mm, dolžina mize: 2.700 mm, tabela razdalj do bata: 1.600 mm, razmak između stupova: 5.200 mm, skupna masa: 400.000 kg, Oprema: dokumentacija / priročnik, Press force: 1,200 t Ram stroke: 600 mm Ram adjustment: 600 mm Strokes per minute: approx. 9 spm Shut height: approx. 1,600 mm Drawing device: Cushion force: approx. 225 t Cushion stroke: approx. 200 mm Podpfx Ajy An H Rsa Dopt Pneumatic ejector in ram: Ejector force: approx. 95 t Ejector stroke: approx. 150 mm Heavy-duty mechanical eccentric drawing press in robust double-column design from Schuler, engineered for continuous industrial operation in the automotive sector. The machine features a press force of 1,200 t with a fixed ram stroke of 600 mm and an additional 600 mm ram adjustment. Stroke rate is approx. 9 strokes per minute. The shut height is approx. 1,600 mm, allowing processing of large-volume dies and components. Particularly noteworthy is the large working area with a bolster size of approx. 4,500 mm and a movable/slide-out press bed, significantly facilitating tool setup and changeover, making the press ideally suited for handling heavy tooling. The integrated drawing device (cushion) provides a cushion force of approx. 225 t with a stroke of approx. 200 mm, enabling demanding drawing and forming operations typically required in automotive body manufacturing. Additionally, the press is equipped with a pneumatic ejector in the ram (approx. 95 t / 150 mm), supporting automated part removal. The press has not been operated in continuous production at the current location since the 1990s and was used exclusively for testing purposes.

Stanje: rabljeno, številka stroja/vozila: 008381, Delovno območje os X: 4250 mm Ppedpjx Swc Hefx Aa Dst Delovno območje os Y: 2280 mm Delovna površina: nesting miza Moč glavnega vretena: 12 kW Št. krmiljenih osi: 5 osi Št. vrtalnih vreten: 11 Št. mest za orodja: 24

Stanje: rabljeno, Leto izdelave: 1978, številka stroja/vozila: 4788, Skupna pritiskalna sila: 35 t Izvlaka: 225 mm Hod bata: 8 - 80 mm Nastavitev bata: 50 mm Montažna višina (hod spodaj, nastavitev zgoraj): 325 mm Pritrdilna površina mize pribl.: 600 x 450 mm Pritrdilna površina bata pribl.: 300 x 225 mm Število hodov na minuto: 160 min-1 Potreba po moči: 2,2 kW Dimenzije DxŠxV: 1000 x 1600 x 2200 mm Teža stroja pribl.: 1,9 t Ppsdew Tukiopfx Aa Dot

Stanje: rabljeno, Pressing force: 50 t Throat depth: 265 mm Stroke: 250 mm Installation height: 400 mm Psdpowyplcefx Aa Dept Table clamping surface approx.: 700 x 450 mm Ram clamping surface approx.: 550 x 300 mm Table height above floor: 850 mm Rapid approach speed: 32 mm/s Working speed: 6.3 mm/s Rapid return speed: 42 mm/s Power requirement: 4 kW Dimensions LxWxH: 1290 x 1160 x 2085 mm Machine weight approx.: 1.75 t Standard equipment: Siemens S7-1200 control system, working mode, inching mode, foot switch, mechanically adjustable stop, light barriers Automation: Optionally available with HORST robot.

Stanje: rabljeno, Leto izdelave: 1972, številka stroja/vozila: 1171, Total pressing force: 160 t Throat depth: 350 mm Ram stroke: 20 - 140 mm Ram adjustment: 75 mm Installation height (stroke down, adjustment up): 740 mm Table clamping surface approx.: 1000 x 680 mm Ram clamping surface approx.: 600 x 300 mm Strokes per minute: 50 min⁻¹ Pjdpouqdwxsfx Aa Dept Power requirement: 15 kW Machine weight approx.: 12 t Standard equipment: Machine includes: - Guard HS Decoiler M 15 / 500 - Year of manufacture 2009 Material width: 15 - 500 mm Coil weight: 1.5 t Coil outside diameter: 1400 mm Coil inside diameter: 380 - 530 mm HS Straightening Machine RME 40 - 9 - Year of manufacture 2009 Material thickness: 0.4 - 2 mm Number of feed rollers: 2 pcs Number of straightening rollers: 9 pcs Straightening roller diameter: 61.9 mm Feed roller diameter: 61.9 mm Feed speed: 40 m/min Feed length: 0 - 9999.99 mm Additional equipment: The machine was retrofitted with SIEMENS S7 control in 2009.

Stanje: rabljeno, Leto izdelave: 1971, številka stroja/vozila: 7130, Total pressing force: 60 t Throat depth: 275 mm Ram stroke: 5 - 100 mm Installation height (stroke down, adjustment up): 375 mm Table clamping surface approx.: 740 x 470 mm Ppjdpfxsuqcxnj Aa Djt Strokes per minute: 14 - 100 min⁻¹ Power requirement: 10 kW Dimensions (LxWxH): 2,300 x 1,500 x 3,000 mm Machine weight approx.: 3.5 t

Stanje: rabljeno, Leto izdelave: 1970, Press force: 30 t Throat depth: 160 mm Adjustable ram stroke: 20 - 45 mm Ram adjustment: 10 / 60 mm Shut height (stroke bottom, adjustment top): 220 mm Table clamping area approx.: 470 x 300 mm Ram clamping area approx.: 250 x 190 mm Strokes per minute: 80 - 240 min⁻¹ Power requirement: 4 kW Dimensions LxWxH: 1,400 x 1,800 x 2,000 mm Machine weight approx.: 2.67 t Pedpfsuqc Enex Aa Dept Standard equipment: The machine's electrical system was modernized in 2015.