Danson Hlb45 2-Axel Extendable Semi Dieplader/Tieflade... nakup rabljenega (83.597)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 365 kg, največja dovoljena obremenitev: 1.635 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.530 mm, višina nakladalnega prostora: 430 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, SARIS MP 305 153 2000 2 NEW VEHICLE Internal dimensions: 305cm x 153cm Side wall height incl. railing: 43cm Loading height: 51cm Gross vehicle weight: 2000kg Payload: 1635kg Braked tandem low-loader trailer Overrun brake and handbrake by KNOTT 2x axles with 1350kg brakes Low chassis Fully welded, hot-dip galvanised steel frame Aluminium profile side walls Steel rail Rear drop-down and removable side wall 15mm strong, non-slip, heavy-duty phenolic plywood floor Jockey wheel 6 lashing rings with 400kg traction each 13" wheels M+S tyres Net/rope hooks on the frame 13-pin plug Rodpfx Aferk Iprjaew Front marker lights Rear lights with reversing light, rear fog light and triangular reflector OPTIONAL ACCESSORIES – PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with bracket - Folding and removable front wall - Integrated loading ramps 2000kg - SARIS alloy wheels - Complete LED lighting - Anti-theft device - Net (fine or coarse mesh) - H-frame - Mesh sides in different heights, also available closed - Flat cover with or without hoops - High cover 180cm - Rear supports Further accessories on request! Plus shipping to Gera and vehicle registration document €150 net Images are for illustration purposes and may show optional extras for an additional charge. Haven’t found the right trailer yet? We have 50–100 vehicles permanently and immediately available in stock for collection. Our workshop is open weekdays from 8:00am to 5:00pm for all types of repairs. Axle repair specialist, also for caravans. Large selection of rental trailers. We also offer a large range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or drop by directly.

Stanje: novo, Leto izdelave: 2026, Nadgradite svojo proizvodnjo aluminija z žago za hitro, varno in skladno rezanje, ki izpolnjuje zahteve za varnost in zdravje pri delu (OHS). A420 je enostavna žaga za razrez aluminijastih profilov manjših dimenzij, bodisi naravnost ali pod kotom (do ±75°). Zagotavlja izjemno varnost z dvoročnim vodenjem reza in popolno zaščito žaginega lista (vključno z varnostnimi tuneli dolžine 900 mm na vsaki strani), ki preprečujejo dostop do žage in nenadzorovano izmetavanje odrezkov. Pnevmatsko dvigovanje in spuščanje zaščitnega pokrova zgolj s pritiskom na gumb. Varnostno stikalo preprečuje delovanje žage pri dvignjenem pokrovu. • Žagina plošča Ø420 mm iz trde kovine (TCT) z 2,2 kW pogonskim motorjem • Skladnost z varnostnim standardom AS / NZS 4024:2014, delo z dvoročnim upravljanjem Redjmb U Tbopfx Afasw • Zgornji varnostni pokrovi s tuneli, vsak 900 mm na svoji strani • Dvigovanje zaščite s pritiskom na gumb za nemoten dostop do delovne mize • Varnostno stikalo izklopi žago ob dvignjenem pokrovu • 2× vertikalna in 2× horizontalna prijemala z nastavljivim pritiskom • Nastavljiv kot rezanja (mitra) do ±75° • Premična zadnja ograja za povečano kapaciteto rezanja • Sistem pršenja-meglice za mazanje žaginega lista • Pnevmatska pištola za čiščenje in notranja LED osvetlitev • Priključek Ø100 mm za odvod ostružkov • Opcijsko: 2,2 kW ektraktor za odsesavanje ostružkov Idealen za: • Proizvodnjo oken in vrat • Proizvodnjo pisarniške opreme • Sestavljanje podatkovnih centrov • Proizvodnjo linearne razsvetljave • Proizvodnjo senčil in zaves • Predelavo kompozitnih materialov

Stanje: novo, Leto izdelave: 2026, Schneiden Sie gehärtete oder rostfreie Stähle mit einer günstigen Trennschleifmaschine? Steigern Sie Ihre Produktion mit einer hochsicheren, SPS-gesteuerten industriellen Warmtrennsäge. Die S200 ist ein halbautomatisches Trennschleifsystem (Warmtrenntechnik), das speziell für das Schneiden von Edelstahl und gehärteten Stählen sowie von matrixartigen Materialien wie Gummi, Gewinden oder Carbonfasern entwickelt wurde, welche einen Schnitt bei hoher Drehzahl erfordern. Die Maschine eignet sich sowohl für Einzelrohre als auch für das gleichzeitige Trennen mehrerer (gebündelter) Rohre. Rsdemcbk Uspfx Afasw Die vollständig pneumatisch heb- und absenkbare Schutzhaube (inklusive Sicherungstunnel, jeweils 900 mm beidseitig) verhindert den Zugriff auf die Säge und hält sicher sämtliche Funken des Schneidprozesses zurück. Ein Knopfdruck öffnet oder schließt die Haube, womit der Tisch komplett und ohne Einschränkung zugänglich ist. Ein Sicherheitsschalter unterbricht den Sägevorgang automatisch beim Anheben der Haube. Die Säge wird durch Zwangsbelüftung und ein Konvektionsdesign gekühlt. Optional ist ein Staubabsaugsystem erhältlich. • Ø200 mm Trennscheibe mit 1,5 kW Antriebsmotor • Sicherheitsstandard AS / NZS 4024:2014, Zweihandbedienung für den Schnitt • Obere Sicherheitshaube mit Sicherungstunnel (je 900 mm pro Seite) • Schutzhaube pneumatisch auf Knopfdruck heb- und absenkbar • Sicherheitsschalter deaktiviert die Säge bei geöffneter Haube • Präzise gefertigte und gewuchtete Hochgeschwindigkeits-Spindel und Antriebseinheit • Präzise 90°-Schnitte, laufruhig und langlebig • 2x vertikale Spannzwingen mit einstellbarem Spanndruck • Einstellbare Vorschubkontrolle für die Auf-/Abwärts-Schnittzyklen • Schnellwechselsystem für den Scheibenwechsel zur Zeitersparnis • Druckluftpistole und LED-Innenbeleuchtung • 1× Ø100 mm Anschlüsse für die Staubabsaugung • Optionaler 2,2 kW Staubabsauger Ideal geeignet für: • Herstellung von Edelstahl- und Hartstahlteilen • Fertigung von Hydraulikrohren • Verarbeitung von Verbund- und Matrixmaterialien • Carbonfaserproduktion • Herstellung von Glasfaserbauteilen

Stanje: novo, Leto izdelave: 2026, Nadgradite svojo proizvodnjo lesa z žago z visoko varnostjo in skladnostjo z zahtevami za varnost in zdravje pri delu (VZD/OHS). A420 je enostavna za uporabo, namenjena hitremu razrezu mehkega lesa v ravne ali zamaknjene dele (do ±75°). Varnostno dovršeno upravljanje preko dvoročnega nožnega pritiska in popolnega pokrova žage (vključno z 900 mm varnostnimi tuneli na vsaki strani), ki preprečujejo dostop do rezila in nenadzorovano izmetavanje odrezkov. Pnevmatsko dviženje pokrova z enostavnim pritiskom na gumb. Varnostno stikalo onemogoči zagon žage, ko je pokrov dvignjen. • Ø420 mm TCT žagin list z 2,2 kW pogonskim motorjem • AS / NZS 4024:2014 varnostni standard, dvoročno upravljanje reza • Zgornje varnostne zaščite z varnostnimi tuneli, 900 mm na vsaki strani žage • Pokrov dvignete s pritiskom na gumb za nemoten dostop do mizne površine • Varnostno stikalo za izklop žage pri dvignjenem pokrovu • 2× navpična in 2× vodoravna objemka z nastavljivim tlakom • Nastavljiv kot zamika žage do ±75° • Pomakljiva zadnja ograja za povečano kapaciteto reza • Zračno pištolo in LED notranja osvetlitev • Priključek Ø100 mm za odvod žagovine • Opcijsko: 2,2 kW vakuumski odsesovalec prahu Zelo primerno za: • Izdelavo gredic in zabojev • Lahko obdelavo lesa • Dekorativno proizvodnjo • Rokodelsko proizvodnjo iz lesa Rjdpfx Afsmb U T Hjaow • Izdelavo pohištva

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 8.000 kg, dovoljena osna obremenitev (os 3): 8.000 kg, prva registracija: 04/1978, skupna dolžina: 12.350 mm, skupna širina: 2.500 mm, vzmetenje: jeklo, velikost pnevmatike: 245/70R17.5, Leto izdelave: 1978, Van Hool Low loader - 3 osi - Rampi - Raztegljiv Leto proizvodnje: 12-4-1978 VIN: 3899 Registracija: OX-84-88 APK/TUV: Raztegljiva nadgradnja Jekleno vzmetenje Nakladalne rampe = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 245/70R17.5 Vzmetenje: lista vzmetenje Zadnja os 1: dvojna montaža; Maks. osna obremenitev: 8.000 kg Zadnja os 2: dvojna montaža; Maks. osna obremenitev: 8.000 kg Zadnja os 3: dvojna montaža; Maks. osna obremenitev: 8.000 kg Teže Lastna teža: 8.280 kg Nosilnost: 30.720 kg Skupna dovoljena masa: 39.000 kg Rsdpsyrrupofx Afaew Stanje Tehnično stanje: dobro Vizualno stanje: dobro Identifikacija Registracija: OX-84-88

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 09/2004, skupna širina: 2.470 mm, vzmetenje: zrak, barva: drugo, Leto izdelave: 2004, Oprema: ABS, Splošne informacije Rjdpeylpf Eefx Afaow Barva: Vijolična Registrska številka: OH-50-PT Konfiguracija osi Znamka osi: BPW Zavore: Bobnaste zavore Vzmetenje: Zračno vzmetenje Zadnja os 1: Dvižna os; Največja obremenitev osi: 9.000 kg Zadnja os 2: Največja obremenitev osi: 9.000 kg Zadnja os 3: Dvižna os; Največja obremenitev osi: 9.000 kg Teže Lastna teža: 5.300 kg Nosilnost: 37.700 kg Dovoljena skupna masa: 43.000 kg Funkcionalnost Izvlečna nadgradnja: Da Stanje Tehnično stanje: dobro Vizualno stanje: dobro Dodatne informacije Za dodatne informacije se obrnite na Arieja. = Dodatne možnosti in oprema = - Dvižna os - Zračno vzmetenje - Twist-lock ključavnice

Stanje: pripravljen za uporabo (rabljen), Na voljo je 2-mestni polnilnik za party sode (polnilnik za male sode) Esau & Hüber. Polnilna zmogljivost: 300/h, format soda: 5l, polnilni mesti: 2. Ogled na lokaciji je možen. Redpfox R Dt Nsx Afaew

Stanje: novo, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: Rjdpfx Afoyvnfgsaow * Loading area in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Recesses in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, manufacturer of our choice Axles: * BPW axles, two rigid axles, two self-tracking axles, air suspension, drum brake, with lifting/lowering function * The self-tracking axles can be locked for reversing by electro-magnetic reverse lock via reverse gear or manually * Axle tools Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Premium and durable corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc dust primer * High-quality two-component (2K) topcoat, single colour, RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2-inch king pin * Galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised connection strip at the front * Mount in the rear area of the gooseneck for ALU loading ramps * Galvanised folding supports under the rear chamfer of the loading area * Holder for a beacon at the rear of the trailer * On the gooseneck and at the rear end panel, left and right, holders for warning signs including socket * TPMS tyre pressure monitoring system according to ECE R 141 * On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Body length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets recesses in the loading area for a 20' (30') or 40' container * Sliding hooks for aluminium loading ramps at the rear of the vehicle * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * Galvanised extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with control via TEBS E depending on the current axle load and current loading status * 2 LED reversing lights mounted on the rear end panel * 2 pairs Ferry-

Stanje: dober (rabljeno), konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, prva registracija: 07/2012, vzmetenje: zrak, velikost pnevmatike: 265/70R19.5, barva: siv, Leto izdelave: 2012, Konfiguracija osi Dimenzija pnevmatik: 265/70R19.5 Znamka osi: BPW Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: dvojna montaža; Najv. osna obremenitev: 10.000 kg Zadnja os 2: dvojna montaža; Najv. osna obremenitev: 10.000 kg Teže Lastna teža: 8.110 kg Nosilnost: 27.890 kg Najv. dovoljena masa: 36.000 kg Stanje Tehnično stanje: dobro Vizualno stanje: dobro Dodatne informacije Rodpfx Aoyyzptjfasw Za več informacij se obrnite na Arieja. = Dodatne možnosti in oprema = - Elektronski zavorni sistem (EBS) - Zračno vzmetenje

Stanje: novo, največja dovoljena obremenitev: 36.360 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Neck (Gooseneck): * Gooseneck with front corners tapered approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square profile climbing strips approx. 15 x 15 mm as well as lower-width extensions * Between the first and second axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (approx. 670 mm wide) – max. point load 5 t/each * Recess in the bevel as well as projecting into the loading area for excavator dipper stick accommodation (approx. 2,900 x 750 x 210/290 mm [L x W x H]) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cutouts in the outer frame of the loading area for fastening ratchet straps (LC 2,000 daN) Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm hardwood covering * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Braking system: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final painting with 2 coats of 2-component topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL 841GL system * Rims in silver grey Including the following additional equipment: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) Rsdpfx Afjyhkq Uoasw * Rear electro-hydraulic unit, under the loading area * On the gooseneck, aluminium side and rear plug-in walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the tapered gooseneck * 2 pairs of WADER container pockets in the loading area for one 20' or 30' container * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * 3 additional pairs of removable, galvanized covers over the wheel recess – max. point load 3.5 t/pc * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hang-in intermediate table, approx. 300 mm wide * Interm

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full selection of vehicles available for immediate or short-term delivery on our website. Extract from the equipment list. Complete equipment details available on request. Gooseneck: * Gooseneck with beveled corners at the front approx. 45°, and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) Redsyhkrrjpfx Afasw * Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outward (LC 5,000 daN) * 2 pairs of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, foldable inward at the central beam front (LC 10,000 daN) * Cutouts in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate covering Two-part Steel Ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with grating floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp segments * Hydraulic lifting device, hydraulically movable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated by reversing gear or manually * Air suspension with lift and lower valve Braking System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Tyres: * Tyres 235/75 R 17.5 3PMSF. Brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork with 2 coats of 2-component topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver grey Included Accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Grating floor on gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating floor on platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Electric-hydraulic power pack underneath the rear of the platform * On the gooseneck, aluminum side panels and rear panel, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One electric winch with radio remote control, approx. 5,400 kg pulling capacity, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for anchoring winch cable on the gooseneck without pulley * One galvanized toolbox, integrated in the beveled gooseneck with an opening for winch passage * Grating floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm on the outer frame of the platform * Lift axle on the front axle with TEBS E control based on current axle load and loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full stock of immediately and soon-available vehicles on our website. Selected features listed below. Complete specification available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Load area: * Load area hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tensioning straps (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate surface above the axles Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections. Hydraulic lifting system, hydraulically extendable * Maximum load capacity per pair: approx. 40,000 kg Redpfx Asyhkqzefaew Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout, activated by reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Tyres: * 235/75 R 17.5 3PMSF – Brand of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Wheels in silver-grey Included equipment: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Grating surface in the gooseneck’s chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the load area’s chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Sand coating applied as slip protection to the checkered plates above the kingpin and loading area * Electro-hydraulic power unit under the rear of the load area * On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The galvanized rear stakes are removable. (Body length approx. 2,560 mm) * One electric cable winch with radio remote control, approx. 5,400 kg line pull, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for guiding the winch cable on the neck without a deflection roller * One galvanized toolbox integrated into the chamfered gooseneck, with opening for winch * Grating surface on gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for approx. 100 x 50 mm slip-in stakes in the outer frame of the loading area * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 7 pairs of... [Text truncated - please provide remaining content for further translation if needed.]

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: Redsw Tpq Djpfx Afajw - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: novo, največja dovoljena obremenitev: 33.865 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete vehicle inventory with immediately and soon available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Area * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood floor approx. 48 mm thick, chequered plate overlay above axles * Cut-outs in the loading area outer frame for attaching tension belts (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5, load index (146/146 F) * Make of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox, lifting capacity approx. 24 t (approx. 50 t tested capacity) Brake system: * Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paint finish: First class and durable corrosion protection * High-quality two-component (2K) single-colour top coat in RAL 3002 carmine red. * Rear section metallised and painted in RAL 9010 (pure white) Steel construction: Steel structure made of high-strength fine-grained steels. * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets, connection as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Hot-dip galvanised steel bulkhead, approx. 400 mm high * Yellow-red air couplings on the galvanised front terminal strip * Spare wheel carrier in front of the bulkhead * Electro-hydraulic power unit * Remote steering front and rear via cable remote control with push buttons, includes axle tracking control (without installation in tractor unit) * Recess at the rear of the gooseneck for aluminium approach ramps * Anchor rail for aluminium approach ramps at the rear of the vehicle * Galvanised folding supports under the loading area rear chamfer * Aluminium drop sides and rear board on the gooseneck, plug-in, approx. 2,440 x 400 mm (L x H) * Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * One galvanised toolbox integrated in the chamfered gooseneck * 4 pairs of WADER container locks in the loading area for a 20', 2x 20', 40' or 45' container * 8 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the loading area outer frame Rsdpfew Tprzex Afaew * Galvanised extensions, extendable by approx. 230 mm per side * Sliding anchor rails for aluminium approach ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard NLGI-2 grease and removable pump protection * 2 LED reversing lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation), complete steel structure shot-peened to SA2.5–SA3, then wit

Stanje: novo, Leto izdelave: 2026, Continuous operation surface grinder for use in production environments, tool rooms, and maintenance departments. Features a modern, stable construction. The spindle head operates on two pairs of guides. Hydraulic feed for two axes, digital readout included as standard. Machine features: - Dual V-type guideways - Hydraulic feed on two axes - Hardened and precision-ground linear guideways for feed motion - Centralized guideway lubrication - Digital readout - Heavy-duty construction - High machining accuracy - Machine ready for operation Technical specifications: TABLE DIMENSIONS: 500 x 250 mm Rjdpfx Afjkkcm Usaow CROSS/LONGITUDINAL TRAVEL: 260 x 560 mm MAX. GRINDING AREA: 540 x 240 mm MAX. DISTANCE FROM TABLE TO SPINDLE CENTERLINE: 490 mm TABLE GUIDE: DOUBLE GUIDEWAY CROSS FEED PER NONIUS SCALE DIVISION: 0.02 mm CROSS FEED PER HANDWHEEL REVOLUTION: 2.5 mm VERTICAL FEED PER NONIUS SCALE DIVISION: 0.01 mm MANUAL VERTICAL FEED PER REVOLUTION: 1.25 mm GRINDING WHEEL SIZE: 200 x 20 x 32 mm GRINDING WHEEL SPEED: 2850 rpm MAIN MOTOR POWER: 1.5 kW OIL TANK CAPACITY: 80 L HYDRAULIC PUMP MOTOR POWER: 1.5 kW COOLANT PUMP MOTOR POWER: 40 W DIMENSIONS: 1800 x 1400 x 1800 mm WEIGHT: 900 kg Equipment depending on version: - Magnetic chuck - Grinding wheel - Grinding wheel flange - Cooling system - Chip separator with magnetic filter - Halogen lighting system - Technical documentation in Polish - CE Declaration The listed price is NET. Price does not include transport costs. For more information, please contact us by phone or email. Please visit our website for our full offer.

Stanje: rabljeno, Plant: Chamber filter press, used, mounted on a steel frame, semi-mobile Application: Sludge dewatering Design: R+B 1200/1200/125/30 head-guided Filter plate size: 1200x1200 mm Number of plates: approx. 125 Filter plates: PP (polypropylene) Cake thickness: 30 mm Chamber volume: approx. 3.8 m³ Filter cloths: optionally available, tailored to the medium Filtration pressure: approx. 15 bar Pump technology: available as an option upon request Power connection: 400 Volt / 125 A (CEE) Weight: approx. 65 t, plus filter cake Chamber volume: approx. 3.8 m³ Polymer dosing pump: e.g. max. 1.5 m³/h – optional, subject to agreement Rjdpfxork Ebke Afaow Manual polymer station: optional on request, e.g. consisting of 2 agitator tanks with mixer, approx. 2 m³ each Sludge conditioning tank: optional on request, e.g. capacity approx. 1.8 m³ Purchase or rental: Inspection of the plants at our works possible by arrangement. Other: Would you like to rent or purchase this plant? Please contact us – we are happy to assist you.

Stanje: pripravljen za uporabo (rabljen),

Stanje: zelo dobro (rabljeno), prva registracija: 10/2023, medosna razdalja: 7.630 mm, barva: srebrn, Leto izdelave: 2023, Lastna teža: 7.490 kg Nosilnost: 22.510 kg Dovoljena skupna masa: 30.000 kg Višina nakladalne površine: 110 cm Tehnični pregled (APK): veljaven do 11.2026 Tehnično stanje: zelo dobro Optično stanje: zelo dobro A&D 2-OSNA POSEBNA POLPRIKOLICA ZA TOVORNJAK Z DVIGALOM 2 OSI, ZRAČNO VZMETENJE TRIDEC KRMILJENA ZADNJA OS SAF OS ŠASIJA POPOLNOMA POCEPLJENA ALUMINIJSKE STRANICE VIŠINA NIZKONADSTROPNEGA DELA: 110 CM DOLŽINA VRATU: 403,5 CM DOLŽINA NAKLADALNE POVRŠINE: 636,5 CM POD Z IVERJEM IZ TRDEGA LESA 28 MM PNEVMATIKE: 265/55 R 19,5 Redpfx Aeylk H Rjfajw NA ZALOGI IMAMO 2 ENAKA POLPRIKOLICI, NEUPORABLJENI

Stanje: zelo dobro (rabljeno), prva registracija: 10/2023, medosna razdalja: 7.630 mm, barva: bela, Leto izdelave: 2023, Lastna teža: 7.490 kg Nosilnost: 22.510 kg Skupna dovoljena masa: 30.000 kg Višina nakladalne površine: 110 cm Tehnično stanje: zelo dobro Optično stanje: zelo dobro A&D 2-OSNA POSEBNA POLPRIKOLICA ZA AVTODVIGALO 2 OSI ZRAČNO VZMETENE TRIDEC KRMLJENA ZADNJA OS SAF OS ŠASIJA POPOLNOMA VROČE CINKANA ALUMINIJASTE STRANICE Redpfx Aeylk Hkjfasw VIŠINA NIZKE NAKLADALNE POVRŠINE: 110 CM DOLŽINA VRATU: 403,5 CM DOLŽINA NAKLADALNE POVRŠINE: 636,5 CM TLAK IZ TRDEGA LESA 28 MM PNEVMATIKE 265/55 R 19,5 Na zalogi imamo 2 enaki polprikolici, nerabljeni.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 07/2020, medosna razdalja: 8.540 mm, barva: bela, Leto izdelave: 2020, Lastna masa: 6.470 kg Nosilnost: 23.530 kg Skupna dovoljena masa: 30.000 kg Višina nakladalne površine: 90 cm Tehnično stanje: zelo dobro Optično stanje: zelo dobro NOOYENS 2-OSNA SPECIALNA POLPRIKOLICA ZA TOVORNJAK Z DIZALKO 2 OSI, ZRAČNO VZMETENJE HIDRAVLIČNO KRMLJENJE SAF OSI ŠASIJA POPOLNOMA VROČE CINKANA ALUMINIJASTE STRANICE NIZKA NAKLADALNA VIŠINA: 90 CM Rjdpsygkxijfx Afasw DOLŽINA VRATU: 375 CM DOLŽINA NAKLADALNE POVRŠINE: 757 CM SKUPNA DOLŽINA POLPRIKOLICE: 1.200 CM PRIKOLICA JE V ODLIČNEM STANJU

Stanje: zelo dobro (rabljeno), prva registracija: 08/2010, barva: zelen, Leto izdelave: 2010, Oprema: ABS, = Additional Options and Equipment = - Central lubrication system = Further Information = Extendable body: Yes Redpouxycuefx Afaew Technical condition: very good Visual condition: very good Price: On request KAMAG K22 MODULE 12 AXLES WITH GREINER LOWBED FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINERY FOR SALE. WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2010, dolžina tovornega prostora: 9.030 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 820 mm, skupna dolžina: 13.850 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17.5, medosna razdalja: 8.630 mm, barva: rdeča, Leto izdelave: 2010, Oprema: ABS, Nooteboom MCO-50-04V 4 x gelenkte Achsen. BPW-Achsen. Fernlenkung mit Kabel. Kupplungshöhe: 95 cm. Gesamtlänge ausgefahren: 26,53 m. Ladefläche: 9,03 m + 6,50 m + 6,50 m. Ladehöhe (beladen): 82,5 cm. = Weitere Informationen = Achskonfiguration Reifengröße: 205/65 R17.5 Bremsen: Trommelbremsen Federung: Luftfederung Hinterachse 1: Zwillingsbereifung; gelenkt; Reifenprofil links innen: 40%; Reifenprofil links außen: 40%; Reifenprofil rechts innen: 40%; Reifenprofil rechts außen: 40% Hinterachse 2: Zwillingsbereifung; gelenkt; Reifenprofil links innen: 40%; Reifenprofil links außen: 40%; Reifenprofil rechts innen: 40%; Reifenprofil rechts außen: 40% Hinterachse 3: Zwillingsbereifung; gelenkt; Reifenprofil links innen: 50%; Reifenprofil links außen: 50%; Reifenprofil rechts innen: 50%; Reifenprofil rechts außen: 50% Hinterachse 4: Zwillingsbereifung; gelenkt; Reifenprofil links innen: 50%; Reifenprofil links außen: 50%; Reifenprofil rechts innen: 50%; Reifenprofil rechts außen: 50% Gewichte Leergewicht: 14.960 kg Nutzlast: 33.440 kg zulässiges Gesamtgewicht: 48.400 kg Wartung HU (Hauptuntersuchung): gültig bis 10/2026 Redpfx Aoyf A Srsfaow Finanzielle Informationen Preis: auf Anfrage Identifikation Typennummer: MCO-50-04V / 25MTR / 2X EXTENDAB = Firmeninformationen = ALLE PREISE SIND NETTO FÜR DEN EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). Wir sprechen Russisch. Wir bemühen uns nach Kräften, korrekte Informationen bereitzustellen, jedoch können aus den veröffentlichten Texten keine Rechte abgeleitet werden.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Premer cevi (maks.): 32 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 200 mm, moč: 9 kW (12,24 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, trajanje garancije: 24 meseci, vrsta pogona: Inverter, obratovalna hitrost: 99 mm/s, pritisk: 130 letvica, debelina stene: 2 mm, delovna dolžina: 1.920 mm, Oprema: dokumentacija / priročnik, 32x2 mm Polavtomatski NC stroj za upogibanje cevi Stroji za upogibanje cevi "Atlas" so NC konstrukcije. Ta tip upogibalnih strojev vključuje hidravlične in pnevmatske sisteme za vse operacije vpenjanja in potiskanja. Atlas ima 3 različne tipe: B, BR, BRF. Serija B izvaja operacijo upogibanja samodejno. Serija BR izvaja samodejno upogibanje in rotacijo. Serija BRF omogoča samodejno upogibanje, rotacijo in podajanje cevi. Krmiljenje z A.C. servo motorjem nudi polavtomatsko zmogljivost upogibanja za seriji BR in BRF. Z ergonomsko višino nalaganja je stroj skladen z varnostnimi in zdravstvenimi zahtevami ter preprečuje ergonomske težave. Izboljšljive nastavitve programiranja za optimizacijo rezultatov vaših projektov upogibanja, nastavitve, ki jih je mogoče razvijati glede na potrebe. Z načinom za varčevanje energije boste povečali energetsko učinkovitost ter prispevali k varovanju okolja in prihodnosti. Inverterski krmilni sistem nove generacije omogoča natančno upogibanje ter optimalno izvedbo vaših projektov. Powerbend način bo olajšal postopek upogibanja tudi pri zahtevnih materialih. Uporabniku prijazen in hitro osvojljiv vmesnik vam omogoča hiter začetek novih projektov. Preprost za uporabo z vsaj 7-palčnim zaslonom na dotik (HMI). Hitro in natančno upogibanje z minimalnim trenjem omogoča linearno vodilo. Fleksibilnost upogibanja z rotacijo glave za upogib. Najvišjo natančnost upogibanja omogoča nevibracijska konstrukcija. Redpfxjvx D D So Afasw Jasna sporočila o napakah za končnega uporabnika olajšajo razumevanje in odpravljanje težav, kar omogoča neprekinjeno delo. Kakovostno upogibanje zagotavljajo sistemi z brisalko (wiper), kroglastim trnom (mandrel) in drugimi.

Stanje: rabljeno, Leto izdelave: 2015, Pregled Ta popolna polnilna linija je bila izdelana leta 2015 pri podjetju KOSME in obsega sistem za depaletizacijo, blok za izpiranje/polnjenje/zapiranje, etiketirko ter celoten transportni sistem. Linija je zasnovana za visokokakovostno polnjenje pijač z isobarno tehnologijo polnjenja preko sondnega ventila ter je primerna za izdelke kot so pivo, gazirane pijače, kombuča ter posebne pijače. S kompaktnim krožnim postavitvijo in kapaciteto do 135 steklenic na minuto zagotavlja učinkovit in higienski postopek od depaletizacije do etiketiranja. Linija je na voljo, saj je bila demontirana in pripravljena za pošiljanje. Po dogovoru možna dostava do pristanišča Rotterdam (Incoterms 2020). Tehnični podatki - Zmogljivost: do 135 steklenic na minuto (BPM) - Formati steklenic: 12 oz (vgrajeno) z dodatki za 22 oz / 24 oz - Polnjen izdelek: pivo, gazirane pijače, kombuča, funkcionalne pijače - Sistem polnjenja: izobarično polnjenje s sondami in elektronskim nadzorom polnjenja - Polnilni razpon: embalaže 12 oz – 24 oz - Sistem etiketiranja: etiketiranje s hladnim lepilom - Zaznavanje steklenic: integriran sistem za zaznavanje zloma steklenic - Konstrukcija: popolnoma iz nerjavečega jekla, higienska zasnova - Čiščenje: avtomatska CIP sposobnost - Upravljanje: HMI z zaslonom na dotik ter upravljanje receptur in izdelkov - Električni priklop: zasnovano za 460Y / 265 V | 3 faze | 60 Hz (ameriška napetost) - Opomba: Za trge zunaj ZDA je potreben pretvornik frekvence/napetosti - Stanje: Stroj je v dobrem stanju, demontiran in pripravljen na pošiljanje Obseg dobave Rodpfsyigigsx Afaow - Depaletizator | KOSME / Semidepal | 2015 - Izpiralec / Polnilec / Stroj za zapiranje kronskih zamaškov (Monoblok) | KOSME | Barifill | 2015 - Etiketirka | KOSME | Flexa 600 (hladno lepilo) | 2015 - Transporter za steklenice | KOSME | – | vključeno v dobavo | 2015 Dodatne informacije - Priložena navodila za uporabo - Osnovna oprema in formati za 12 oz in 22 oz vključeni - Dodatna dokumentacija na zahtevo - Vsi transportni trakovi so vključeni - Ekipa za demontažo je na voljo za nadzor ponovne inštalacije in zagona - Specifikacije za medije (zrak, CO₂ / plin) na voljo na zahtevo

Stanje: rabljeno, WT-2000PV, µ-PCD, Semilab measuring device for solar cell production Redpfx Ajpvkt Sjfaow Model: WT-2000PV Type: µ-PCD Condition: Used