Casadei Skobeljni In Debelinki, Skobeljniki nakup rabljenega (120.339)

Stanje: novo, Pressure: 100Motor: 11Installation Height: 500Max. Stroke Length: 400Ram Adjustment: 790 x 600Table Height: Floor to Top of Table - 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmWeight approx.: 5,500Oil Fill: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 bar Control / Key Switch Modes: Setup Mode – Manual, without light curtain Automatic Mode – Full speed with light curtain Hydraulic System: Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 units, Ø 50 x 30 mm Auxiliary Guides: 2 units, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc – 23 l/min, helical gear pump Speeds: Advance: 110 mm/sec Return: 200 mm/sec Pressure Phase: 9 mm/sec Machine Dimensions: Installation height: 500 mm Stroke length: 400 mm Ram plate: 790 x 600 mm (with T-slots) Table plate: 790 x 600 mm (with T-slots) Table height: 850 mm (from floor to top of table) Hydraulic Accessories: Hydraulic control block & components by REXROTH Bedpswrkctjfx Akredc Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Pressure holding valve Control Accessories: Siemens S7-1200 control system Main control cabinet Safety PLC by SICK Safety light curtains by SICK (700 mm) Linear scale for stroke adjustment 10" BEIJER touchscreen (German & English) Movable two-hand control Ethernet interface for remote maintenance Fault indicator with light and audible alarm Dual workspace lighting Side safety doors (can be swung out) Hydraulic proportional valves Dual-channel safety control Operating manual & parts list (German) Complies with current machinery directive EN 693 Oil quantity: 220 liters (tank volume: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 light grey & RAL 7016 anthracite grey

Stanje: novo, Koda: N0235 Blagovna znamka: CASADEI INDUSTRIA Model: E 350 PM Avtomatski robni lepilni stroj s lepilnim lončkom za vroče taljenje (EVA), verižnim podajanjem plošč in predrezkarjenjem Maksimalna kakovost obdelave - Verižni podajalni sistem - Predrezkanje (E350PM) - 3 prosti prostori za končne enote Visoka zmogljivost - Hitrost podajanja 7 m/min - Višina plošče 45 mm - 2 mm robni trakovi Minimalna zasedenost prostora - Dolžina 2,30 m Enostavna uporaba - Nastavitve enot s kosom roba - Preprosta in intuitivna uporaba stroja 3-položajna vodilna ograja pri vhodu - 0-1-2 mm (glede na debelino roba) Verižni transport plošč - Zanesljiv oprijem plošče zagotovljen s posebnimi nedrsečimi gumijastimi blazinicami. - Linearno podajanje omogočeno z dvojnimi drsnimi vodili s posebno geometrijo profila, natančno obdelano do stotinke milimetra. - Dolgotrajno monolitno ogrodje, popolnoma obdelano v enem ciklu na CNC-obdelovalnem centru. Pritiskalna letva z zapornimi ročicami - Zgornja pritiskalna letva z dvojnim zaporedjem gumijastih koles na ležajih, z zapornimi ročicami in indikatorjem položaja Predrezkarjenje - NEVIDNA LINIJA LEPLJENJA - DIAMANTNA orodja Ø= 60 mm H= 54 mm - HF motorji 200 Hz – 12.000 obr/min – 0,75 kW (vsak) - Namenski odsesovalni sistem in pihalnik za čiščenje plošče pred lepljenjem Lepilna enota - POPOLNO LEPLJENJE, HITRE IN PRAKTIČNE NASTAVITVE - 6 grelnih elementov za enakomerno temperaturo lepila - Motoriziran lepilni valj z notranjim električnim grelnim elementom - Spodnji teflonsko prevlečeni lepilni lonček za popolno in hitro čiščenje Bdedpfx Akeyvt Exorsc Pnevmatske škarje, pritisni valji, sistem podajanja roba - PODROBNOSTI, KI ODVISUJEJO - Podajanje roba je sinhronizirano z obdelovano ploščo - Nihajno gibanje rezalne škarjaste enote za popolno lepljenje - Hitro in natančno pozicioniranje pritiskalnih valjev - Sistem "prebere" debelino roba, kar onemogoča napake! Obrezovanje koncev - UČINKOVITOST IN VSESTRANSKOST - Odrez presežka roba spredaj in zadaj - Delovni cikel nadzorovan s PLC-jem - Možnost izklopa iz nadzorne plošče (PLC) Poravnalna rezkalna enota - Poravnalna rezkalna enota s standardnimi navpičnimi disk-kopirji - Možnost obdelave za robove med 0,4 in 2 mm Anti-adhezivna/pršna enota za ločevalni sredstvo (opcijsko) - TRENUTNO POPOLNO ČIŠČENJE - Pršilna funkcija nadzorovana s PLC-jem - 2 pršilnika (spodnji in zgornji) in rezervoar za tekočino Infrardeča svetilka (opcijsko) - ZA NAJBOLJŠE POGOJE LEPLJENJA - Ustvari optimalne pogoje za popolno lepljenje - Segreva plošče in odstranjuje vse sledi vlage.

Stanje: zelo dobro (rabljeno), Večnamenski formatni in debelinski stroj SCM Casadei Model: C 30 C debelinka 3 kW: širina 30 cm, največja višina približno 200 mm, 3 noži, 1 hitrost podajanja, Bdsdpfx Akjy Eyhrorec glajilka: širina 30 cm, dolžina miz 150 cm, 3 noži, nastavljivo vodilo pod kotom, rezkalnik 3 kW: vreteno fi 40 mm, vreteno nastavljivo gor-dol, 4 hitrosti, stranski voziček, nastavljivo vodilo, formatna žaga 3 kW: predrezilo, nastavljivo gor-dol in 0-45 stopinj, voziček 225 cm, merilo na stranskem vozičku, največji žagin list 315 mm Horizontalni vrtalni stroj: miza nastavljiva gor-dol, naprej-nazaj in levo-desno, Stroj ima 3 motorje napajanje 380 V, Rabljena naprava v dobrem stanju, pripravljena na delo, masivna večnamenska naprava.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, Spindle tiltable: Yes, -45 to 45° Height adjustment: Handwheel Tilt adjustment: Handwheel Fence adjustment: Manual Bdsdpfxegyzzms Akrjc Height display: Mechanical counter Tilting angle display: Mechanical counter Milling fence indicator: Mechanical counter Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 8000, 10000 rpm Power consumption: 7 kW Motor brake: Yes, automatic Extraction connection: 1 x 120mm, 2 x 80mm Machine length: 2500mm Machine width: 1250mm Weight: 510kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Tiltable spindle: Yes, -45° to +45° Height adjustment: electric Bdodpfjgr Ufpex Akrec Tilting adjustment: electric Fence adjustment: manual Height display: digital Swivel angle display: digital Spindle fence display: mechanical counter Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 8000, 10000 rpm Power input: 7 kW Motor brake: Yes, automatic Extraction connection: 1 x 120 mm, 2 x 80 mm Machine length: 2500 mm Machine width: 1250 mm Weight: 510 kg

Stanje: novo, Leto izdelave: 2026, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Planer table length: 2720 mm Adjustment of planer table: Lever Hollow and pointed joint adjustment: No Chip removal display: Scale Hollow/pointed joint display: - Planer fence angle adjustable: Yes Motor power: 7 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 870 kg Bdsdpfx Akogr Udvsrsc

Leto izdelave: 2024, stanje: rabljeno, To ogłoszenie dotyczy zestawu Frozen in Time F100 Automatyczna Liofilizator + Chiller Frigel. Bedpfx Aoy Tmrmjkrjdc Urządzenie jest w pełni sprawne i gotowe do natychmiastowego odbioru. Wyjątkowa okazja nabycia wysokowydajnego, przemysłowego zestawu do liofilizacji, zakupionego jako nowy w czerwcu 2024 roku. Ten kompletny pakiet obejmuje zaawansowany liofilizator Frozen in Time F100 wraz z profesjonalną chłodziarką przemysłową Frigel, chłodzoną powietrzem. System był regularnie serwisowany i jest w doskonałym stanie technicznym. Został zaprojektowany z myślą o niezawodnej, ciągłej produkcji. Obecny właściciel wycofuje się z rynku słodyczy liofilizowanych i koncentruje działalność na innych sektorach, co daje możliwość natychmiastowego zakupu sprzętu bez oczekiwania na realizację zamówienia przez producenta. Co zawiera oferta? - [x] 1 x Frozen in Time F100 - Przemysłowy Automatyczny Liofilizator - [x] 1 x Chiller Frigel - Przemysłowa Chłodziarka Wodna, chłodzona powietrzem - [x] 3 x Kompletne zestawy tac produkcyjnych (pełne wykorzystanie 22-miejscowej konfiguracji) - [x] Oryginalna dokumentacja techniczna: kompletne specyfikacje producenta, rysunki konstrukcyjne oraz instrukcje obsługi Parametry techniczne 1. Frozen in Time F100 Automatyczny Liofilizator Przeznaczony do procesów spożywczych i przemysłowych, zapewnia pełną automatyzację od zamrażania kontaktowego po końcowe suszenie, wszystko w jednym, zaprogramowanym cyklu. - Producent: Frozen in Time - Wydajność suszenia: powyżej 100 kg produktu na cykl 16–24 h (w zależności od rodzaju wsadu) - Kondensator lodu: pojemność 150 kg - Wydajność kondensatora: 130 kg / 24 h - Temperatura kondensatora: -60°C - System rozmrażania: Gorący gaz - Półki i sloty: 13 półek, łącznie 22 miejsca na tace - Całkowita powierzchnia półek: 10,4 m² - Odstęp między półkami: 30 mm - Zakres temperatur w komorze: od -50°C do +90°C - Pompa próżniowa: wysokiej klasy Pfeiffer Duo 65 - Chłodzenie: mocny kompresor 155 m³/h na czynnik R404A - Wymiary (W x S x D): 2,1 m x 1,8 m x 3,6 m 2. Przemysłowy Chiller Wodny Frigel (Seria MRS) Chłodziarka procesowa klasy przemysłowej, o bardzo efektywnej konstrukcji i kompaktowych wymiarach, idealna do ustawienia bezpośrednio przy maszynach przetwórczych. - Producent: Frigel - Kompresor: niezawodny hermetyczny kompresor typu Scroll - Czynnik chłodniczy: ekologiczny R410A - Kondensator: efektywna, w pełni aluminiowa technologia mikrokanaliku; wydajność wymiany ciepła wyższa o 20-40% i masa niższa o 60% w porównaniu do tradycyjnych modeli lamelowych - Parametry pracy: zakres temperatur wody od 0°C do 25°C, praca w wysokich temperaturach otoczenia do 45°C - Serwis: wytrzymała konstrukcja, bardzo łatwa w czyszczeniu myjką ciśnieniową

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: MR003895, Dobro ohranjen, malo rabljen debeleinko z širino skobljanja 520 mm. Električna nastavitev delovne mize, digitalni prikaz ter pnevmatsko dvižni ravnalni mizi. Stroj iz absolutno najvišjega segmenta. Nova cena tega stroja približno 20.000 €. Stroj je opremljen z naslednjimi opcijami: - Tersa skobeljna os, vključno z enim kompletom nožev Bdedpfsy I Nzaox Akrsc Tehnične specifikacije: - Serijska številka: AB00017878

Stanje: dober (rabljeno), Leto izdelave: 1994, Velikost mize 1100 x 750 mm Moč motorja 5 kW Premer vretena 30 mm Hitrost(i) 2900/4400/6000/8000 vrt/min Teža 500 kg Bdodpfxoyf N E Ee Akroc

Stanje: rabljeno, Leto izdelave: 2000, potovalna razdalja osi X: 600 mm, pomik osi Y: 430 mm, pomik po osi Z: 460 mm, MORI SEIKI SV-400 S 4. IN 5. OSJO VERTIKALNI OBRATOVALNI CENTER PROIZVAJALEC: MORI SEIKI, IZDELANO NA JAPONSKEM MODEL: SV-400 LETO: 2000 KRMILJE: MORI FANUC MSC 501 VELIKOST MIZE: 900,0 x 500,0 mm POMIKI (XYZ): X: 600,0 mm Y: 430,0 mm Z: 460,0 mm HITROST VRETENA: do 12.000 min⁻¹ VRETENSKI KONUS: BT 40 MENJALNIK ORODIJ (ATC): 30 POSTAJ HITRI POMIK (XYZ): 32.000 mm/min PODAJANJE: 1–16.000 mm/min DODATNO: - NIKKEN enota za 4. in 5. os - RENISHAW merilni sistem Bdedpfx Aetvau Hekrec - DVOJNI transporter za ostružke - HLADILNI SISTEM

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Automatic edgebander for pre-glued edges Bdodpfx Akjwfw A Hjroc

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Ram Area: 900 x 600 mm Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Bdsdpfowzzzfex Akrec Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Operating instructions & parts list (German), including maintenance plan

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, AVTOMATSKA PROFILIRKA CASADEI MOD. MATRIX 5 (4+UNIVERZALNA) - 4 glave za skobljanje z legiranimi rezili Sestava: - Spodnja horizontalna - Desna vertikalna - Leva vertikalna - Zgornja horizontalna - Univerzalna - Skupna moč: 31,9 kW Bdsdpfxjx Rp Ixo Akrsc - CE - Leto 2005

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč in malo uporabljen tračni sušilnik podjetja New eco-tec naprodaj. Po želji je možen tudi z izpiralnikom zraka in silosom 180 m³ za posušene materiale. Naprava je bila do nedavnega v obratovanju in je takoj pripravljena za uporabo. Sistem obsega 2 kontejnerja in ima dolžino traku 24 m, projektirano za toplotno moč 1,5 MW. Tračni sušilnik je v kontejnerjih v celoti izdelan iz nerjavečega jekla. Bdsdpfx Akeyr Aiqsrec Ogled možen po dogovoru.

Stanje: novo, Pressure: 60 Motor: 11 Installation height: 450 mm Max. stroke length: 400 mm Table size: 600 x 500 x 80 mm Ram surface: 600 x 500 x 90 mm Table height: 850 mm Dimensions (L x W x H): 1,300 x 2,000 x 2,700 mm Weight approx.: 4,000 kg Oil fill: 200 L Control / key switch: 1. Setup mode, manual, without light sensor (max. 10 mm/sec speed) 2. Automatic mode (at full speed) with light sensor Main cylinder: Ø 150 mm Auxiliary cylinders: 2 pcs Ø 60 x 40 mm Auxiliary guide: 2 pcs Ø 40 mm Motor: 7.5 kW / 11 hp (IE3) Pump: 18 cc – 26 L / ASC Speed: advance 110 mm/sec – return 120 mm/sec; pressure: 11 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 600 x 500 x 80 mm (with T-slots) Ram plate: 600 x 500 x 90 mm (with T-slots) Bjdpfx Aksmmuq Isrsdc Table height: 850 mm (floor to top edge of table) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10–60 tonnes) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC: SICK Light sensors: SICK 700 + 150 mm Linear encoder for stroke length setting 7” PLC display – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for malfunctions (visual & audible) Double work area lighting 8 free I/Os on the PLC for external connections The press meets the Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating instructions & parts list (German) With side safety door (doors can be slid back)

Stanje: novo, Pressure: 125Motor: 22Installation height: 500Stroke length (max.): 400Table size: 800 x 600 x 120Ram area: 800 x 600 x 300Table height: 850Dimensions (LxWxH): 1,600 x 2,000 x 3,200Weight approx.: 7,000Oil fill: 400Control / Key switch: 1. Setup mode Manual without light sensor (max. 10 mm/sec. speed) 2. Automatic (at full speed) with light sensor Main cylinder: Ø 220 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Auxiliary guides: 2 pcs Ø 50 mm Motor: 15 kW – 22 hp (IE-3) Pump: 48 liters / ASC Speed: Forward 120 mm/sec – Return 140 mm/sec – Pressure: 13 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 800 x 600 x 120 mm (with T-slots) (customized design possible) Bdodpfxsmr Hpce Akroc Ram plate: 800 x 600 x 300 mm (with T-slots & ribbed welding) Table height: 850 mm (floor to top of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10 – 125 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swivelling operator panel Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear scale for setting stroke length 9” PLC screen – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) Double workspace lighting 8 free inputs & outputs on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Two-channel cable protection Operating manual & parts list (German) With lateral safety door (doors slide to the rear)

Stanje: novo, Leto izdelave: 2022, Working width: 630 mm Planing height: 300 mm Cutterhead: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: mechanical counter Feed speed: 5 / 8 / 12 / 18 m/min Infeed roller: steel Pressure beam: segmented Outfeed roller: rubber Table rollers: none Motor power: 9 kW Extraction connection: 150 mm Bdodpfx Akol D Rxbsrec Machine length: 1200 mm Machine width: 1200 mm Weight: 810 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Sliding table length: 3200 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 200 mm Scorer: yes Saw blade height adjustment: motorized Saw blade tilt adjustment: motorized Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: digital Rip fence display: scale Bdedpfxekuzd He Akroc Crosscut scale display: scale Saw blade diameter: 550 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7.5 kW Motor brake: yes / automatic Extraction connection: 100 mm and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1000 kg

Stanje: rabljeno, Leto izdelave: 2005, TAKISAWA TC 350M CNC stružniški center Proizvajalec: TAKISAWA, izdelano na Japonskem Model: TC – 350M L5 Krmiljenje: FANUC 21-iTB Leto: 2005 Revolver: 12 postaj Bdjdpfx Aoy Eyb Eskroc Maksimalni premer obdelave: 700,0 mm Največji stružni premer: 460,0 mm Največja stružna dolžina: 510,0 mm Hodi: X-os – 440,0 mm / Z-os – 550,0 mm Obratno število vretena: do 2.500 min⁻¹ Kapaciteta palic: 80,0 mm (potrditi) Dodatno: C-os Rezkanje Konjiček Tipalo za nastavljanje orodij Transportni trak za ostružke 10'' 3-čeljustna vpenjalna glava Orodja za revolversko glavo

Stanje: zelo dobro (rabljeno), Technical data: Max. planing width: 230 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 5 Spindles 1, 4, and 5 each on a separate motor Spindles 2 and 3 powered by a single motor Number of steel top feed rollers: 4 Number of rubber top feed rollers: 3 Extraction port diameters: 100, 110, 140 mm Stepless feed speed adjustment Cardan shaft feed drive Worktable lubrication pump 1 smooth roller in the table Pressure: 6 bar Electric lifting of the machine body Bdjdpfxev Tyg Ej Akrsc Power supply: 400 V Total power: 35 kW Overall dimensions: Length: 4860 mm Width: 1640 mm Height: 1670 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Casadei Matrix A – identical machine to SCM Compact O, R, L, U - 2-axis control for positioning the units - Four-side planer and profiling machine - Working width: 25 to 230 mm - Working height (wood thickness): 6 to 155 mm - Max. final cross-section of workpiece: 155 x 230 mm - Minimum workpiece length: 480 mm - Max. adjustable cutting depth: 10 mm - Spindle speed: 6,000 rpm MACHINE EQUIPMENT: - Robust, welded machine frame - Sound-insulated, large-area hood with gas struts - Raised control panel on operator side - Steel infeed table 2,500 x 250 mm Table height: 880 mm Side-mounted, spring-loaded infeed conveyor Manual table lubrication after jointer 1) Lower horizontal spindle 5.5 kW 2 & 3) Vertical spindles right and left, each 7.5 kW 4) Upper horizontal spindle 7.5 kW FEED SYSTEM: - Feed speed, adjustable: 5 to 25 m/min Feed motor: 1.1 kW (1.5 HP) ADDITIONAL FEATURES: - CE marking - Power supply: 380 V three-phase, 50 Hz - Lockable main switch, automatic star-delta start Bsdpfex Dx Acex Akrjdc Emergency stop at front and rear - Installed power: 37 kW (50 HP), IN 62A - Braked motors - Spindle drive via universal joints Motor for height adjustment: 0.37 kW - Axial spindle adjustment: Lower horizontal spindle: 0 to 15 mm Upper horizontal spindle: 0 to 25 mm Vertical spindles: 0 to 25 mm - Permissible tool diameters: Lower horizontal spindle: Ø 120 to 140 mm Vertical spindles: Ø 100 to 180 mm Upper horizontal spindle: Ø 100 to 180 mm End milling cutter: Ø 140 x 12 x 40 mm - Recommended compressed air supply: 7 bar Operating pressure: 6 bar Average consumption: 0.85 Nl/cycle Connection: 1/2" G Operating manual and tools Year of manufacture: 2000 Price: 9500.-

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical parameters specified in the manual, on workpieces made of: plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical worktable allows for easy loading and unloading of processed parts and minimises the maximum dimensions of the machine to the essential minimum. Tool changing using a 10-position side-mounted tool magazine enables a wide range of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: Bdedpfx Aemzbr Sokrjc X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speed (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp – ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, moč: 16 kW (21,75 KM), največja višina reza: 90 mm, največja širina rezanja: 4.500 mm, premer žaginega lista: 30 mm, dolžina rezanja (maks.): 4.500 mm, Cutting length: 4500 mm Cutting width: 4300 mm Cutting height: 90 mm Saw blade diameter max.: 350 mm Main saw motor: 7.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs., 1230 x 400 mm Bdjdpfx Ajwu Ib Sskrec Clamping grippers: 7 pcs. Saw carriage height adjustment on THK guides Pressure beam with slots (pass-through) Side aligner Pneumatic quick-release saw blade system Extraction port diameter: 4 x 120 mm Installation dimensions (L x W): 6700 x 7100 mm Weight: approx. 2,500 kg

Stanje: rabljeno, Leto izdelave: 1994, Naprava za vrtanje čepnih lukenj: razmak 16, 22, 25, 32 Globina vrtanja: 145 mm Dolžina podolgovate luknje: 240 mm Višinski nastavek: 135 mm Moč motorja: 1,5 kW Število obratov: 2800 obr/min Pritiskalec: ročni Bdodpfxjx I Aiqo Akrsc Dolžina stroja: 1280 mm Širina stroja: 960 mm Teža: 300 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good, nearly new condition. The machine comes from a very small joinery and has had very little use. The machine is in its original state; only cleaned, with the paintwork untouched. With this machine, you can mill elongated slots and drill dowel holes on two levels without reclamping. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 Bsdpsynv E Rjfx Akrodc With this machine, you can mill elongated slots for lock cases, for example, and similar applications, or create all types of frame dowel joints—right-angled, butt, and mitre joints. Ideal for dowel joints in timber frame construction, furniture, door, window, and staircase production, as well as similar applications. Thanks to drilling on two levels, the index rails, stops, and the machine’s setup, dowel joints can be produced in the shortest time, making the machine highly efficient. Requires a compressed air supply of 6 bar (very low air consumption). Right-hand rotation. Mills and drills very well and cleanly. Comes with 2 angle stops (a centre stop and a side stop, which can be used on either side). Also includes a mitre stop. At the front of the machine table, there is a 2000mm-long guide rail with two flip stops. The rail can be shortened or extended as needed. Workpieces are clamped using 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic. The pneumatic switch is at the front of the machine, enabling quick adjustment of indexing and drilling levels. Fitted with a precision 12mm indexing rail, featuring a centre position and 12 positions to the left and right. Can be quickly converted for slot-milling; the machine can then be used without the indexing system and with two adjustable stops left and right, offering a maximum working width of 420mm. Maximum drilling height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything works perfectly. We offer nationwide delivery and demonstration within Germany for 220.00 EUR, so you bear no risk when purchasing. Delivery to Austria and other EU countries available on request. Machine table width: 870mm; depth at sides: 140mm; depth at center: 350mm Professional-grade equipment, not DIY store quality. Ready for immediate use. Fitted with 2-jaw drill chucks up to 20mm. Very robust and durable construction. The precision linear guides with backlash-free ball bearing bushings are fine and operate smoothly.