Butt Bk912 nakup rabljenega (121)

Stanje: pripravljen za uporabo (rabljen), Stroj za varjenje PE-KPE cevi, stroj za čelno varjenje, varilec plastičnih cevi, stroj za zrcalno varjenje, DYTRON ST 160, rabljeni stroj Proizvajalec: DYTRON Model: ST 160 Skupne dimenzije: Dolžina: 1000 mm Širina: 530 mm Višina: 1160 mm Električni podatki: 230 V DYTRON – Varilna klop ST-160 ST 160 varilna klop je namenjena za čelno in zrcalno varjenje termoplastičnih cevi. Omogoča: - Zrcalno (čelno) varjenje: 40 – 160 mm premera - Puhalno (ragljo) varjenje: 40 – 110 mm premera Za lažje zrcalno varjenje vsebuje set: - Posebna mobilna delovna klop - Električni obrezovalnik cevi - Varilni agregat POLYS P-4a (1200 W) - Vložki za vpenjalke v dimenzijah: d40, 50, 63, 75, 90, 110, 125, 140 mm - Varilni nastavki (pari): d40, 50, 63, 75, 90, 110 mm - Primež-vpenjalni mehanizem za fitinge - Zrcalni nastavek: d170 - Kovček za dodatke - Podporno stojalo Dsdpfx Afoxnqt Ujaeuu - Inbus ključa: 4 mm in 8 mm ST-160 varilna klop je opremljena z mikroprocesorsko nadzorovanim varilnim agregatom. Standardni komplet vključuje tudi posebno delovno klop in kovček z dodatki. Tehnične specifikacije ST-160 Funkcija: Tehnični podatki - Puhalno (ragljo) varjenje: 40 – 110 mm - Zrcalno (čelno) varjenje: 40 – 160 mm - Moč varilnega agregata: 1200 W - Moč obrezovalnika: 630 W - Napajanje: 230 V / 115 V - Regulacija temperature: elektronski regulator - Temperaturno območje: 180 – 280 °C - Indikator temperature: LED dioda - Obrezovalnik: Električni - Teža: 70 kg

Stanje: rabljeno, Leto izdelave: 2002, Technical Details: x-axis travel: 1500 mm z-axis travel: 1300 mm Control system: YASNAC XRC Control Total power requirement: 3.3 kVA Total weight approx.: 3,200 kg The welding robot system consists of: Dsdpfx Aju R Dfkefaouu - Welding rectifier MESSER, type Phoenix 500TG; MIG-MAG / TIG and MMA welding up to 500A; air-cooled; protection class IP 23 - Wire feeder EWM, type Phoenix Drive 4 ROB WE, wire diameter Ø 1.0 - 1.2 mm, feed speed 0.5 - 24 m/min, protection class IP 23 - MIG/MAG shielding gas welding torch BINZEL for wire Ø 0.8 - 1.6 mm - Robot ERCS UP6-RE00 with YASNAC XRC Control, axis travel Y-axis=1,500 mm and Z-axis=1,300 mm, arc movement swivel=approx. 90° right/left, swivel radius=1,000 mm, rotation 360°, welding torch rotation 360°, outreach max/min: 1,500 / 500mm - 1x control cabinet L:900 x W:900 x H:2,500 mm - 1x control panel ERCS-UP6-RE00, control 4.0 XRC, L:610 x W:800 x H:900 mm - 1x welding table L:4,400 x W:550 x H:1,100 mm, with compressed air connection 10 bar, working area LxW 1,200 x 340 mm, x-axis travel 3,250 mm Additionally included: 1x straightening station DETEC (with work table and straightening unit) 1x butt welding station with feed table as seen.

Stanje: skoraj kot novo (rabljeno), Technical Data for Long-Span Shelving System: Shelving System: SSI Schäfer Type: WR 600 Technical Data for Installation: Number of shelving rows: 01 pc. Number of levels incl. ground level: 04 pcs. Included in delivery: 02x Long-span shelf uprights, 2nd choice (new goods) Material colour: Sendzimir galvanized Upright profile: 60 x 31 x 1 mm Incl. cross and diagonal braces, 01x Swivel / brake castor | 01x Fixed castor Castor Ø: 100 mm (Bolted truss construction) 2,195 mm high 1,050 mm deep 08x Long-span shelf beams, 2nd choice (new goods) Duodpfeqhkh Ajx Afaeu Material colour: RAL 7035 light grey Box section: 80 x 40 mm Beam type: ASM50-CES80|40|1.5 Specification: Step beam Locking clips: 5 HK (hooks) Clear width: 2,400 mm 04x Chipboard panels, 2nd choice (new goods) Thickness: 22 mm Dimensions: 2,380 x 960 mm Specification: butt edges all around 16x Locking pins, new Specification: fully galvanized For securing the longitudinal beams against accidental lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Transport or shipping beyond this is subject to additional costs, which can be requested from us individually depending on the place of delivery or scope of supply.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Številka stroja: 559969 Proizvajalec: HOMAG Model: PROFI BAZ 723/42/18/KC Leto izdelave: 2004 Tehnični podatki: Teža pribl.: 10.000 kg Krmiljenje: PC85 Mere (d x š x v) pribl.: 39.000 x 3.200 x 3.200 mm C-os: da Programska oprema: WoodWOP Delovna dolžina X-os: maks. 4.200 mm Delovna širina Y-os: maks. 2.075 mm Glavno vreteno: 2 x 14,5 kW Izmenjevalec orodij: 2 x 18-kratni Vakuumska črpalka: 2 x 100 m³/h Enota za lepljenje robov: da, 360° Premični pomik maks. X-os: 80 m/min Premični pomik maks. Y-os: 60 m/min Premični pomik maks. Z-os: 40 m/min Opis naprave Visoko opremljen, tehnično dobro vzdrževan CNC obdelovalni center HOMAG PROFI BAZ 723/42/18/KC v portalni izvedbi z 360° enoto za lepljenje robov, 2 glavnima vretenoma s C-osjo, avtomatsko pozicioniranimi konzolami in HOMAG Optimat TBP 370 vakuumskim podajalnikom v portalni izvedbi. Prvotna cena je bila približno 620.000 EUR. Tehnični podatki in oprema HOMAG Profi BAZ 723 CNC: - Dolžina obdelovanca pri enojnem obratovanju maks. 4.200 mm - Dolžina obdelovanca s frezom Ø 25 mm za nihajno obratovanje maks. 2.040 mm - Dolžina obdelovanca pri lepljenju za nihajno obratovanje maks. 1.850 mm - Širina obdelovanca (frez Ø 25 mm) maks. 2.075 mm - Širina obdelovanca (lepljenje) maks. 1.950 mm - Širina obdelovanca (vse enote) maks. 1.850 mm - Konzolna miza KC-sistem, 2 kosa levo/desno samodejno pozicioniranje konzol in vakuumskih prijemal - Prvo glavno vreteno s C-osjo motor 14,5 kW vrtljaji 0–24.000 min⁻¹ izmenjevalec orodij 18-kratni (brez orodja, HSK držal in enot!) vrtalna glava 17 vreten navpično (7 vreten smer X, 11 vreten smer Y) vrtalna glava 4 vretena vodoravno 4-SP+Sawe 0/90 stopinj izpihovalna šoba pnevmatsko na nosilcu - Drugo glavno vreteno s C-osjo motor 14,5 kW vrtljaji 0–24.000 min⁻¹ izmenjevalec orodij 18-kratni (brez orodja, HSK držal in enot!) vrtalna glava 17 vreten navpično (7 vreten smer X, 11 vreten smer Y) vrtalna glava 4 vretena vodoravno 4-SP+Sawe 0/90 stopinj izpihovalna šoba pnevmatsko na nosilcu - Agregat za lepljenje robov 360° s čelnim stikom montiran na desni strani portala z Y-pogonom Pogon vretena s C-osjo višina roba maks. 65 mm debeljina roba 0,4–3 mm predrezalna postaja in 2-kratni valjčni magazin - Transportni trak za odvod odrezkov z izhodnim trakom (Orodja, HSK držala in agregati za izmenjevalec orodij niso vključeni v obseg dobave). Za transport razstavljenega stroja je potrebna transportna košara HOMAG. Dsdpfx Afexvy Uksajuu Plačilni in dobavni pogoji Dobava: iz temeljev, nepakirano Plačilo: 100 % pred nakladom Garancija: brez garancije

Stanje: rabljeno, Leto izdelave: 1979, Roller diameter 420 mm Throat depth 410 mm Saw blade length 3150 - 3260 mm Saw blade width 3-16 mm Duodpfx Afjvg R U Hjaju Weight approx. 600 kg with IDEAL butt welding machine without table! Only a custom-built mini table (made from hardwood) is included Operating manual available

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 2.250 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 201202058, Oprema: klimatska naprava, nizka raven hrupa, parkirni grelec, vrtilna hitrost brezstopenjsko nastavljiva, Električni pometalni stroj Tennant Green Machines 500 ZE BREZ IZPUSTOV! Dujdpfx Ajx N I Dijfaeu Električni pogonski motor 15 kW; vzvratna kamera, 2 polnilnika, 2 novi rezervni pometalni krtači in dodatna oprema; različni karoserijski deli na novo prebarvani, običajna obraba glede na starost in uporabo, tehnični pregled do 07/26. Pršenje megle proti prahu je delno možno. TEHNIČNI PODATKI GLEJTE SLIKE!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Heuft Reflexx – visokohitrostni pregledovalnik praznih steklenic in etiket. Dsdpfxsytrdte Afaouu Model: Reflexx HBBRTIXX Krmilnik: Spectrum TX Kapaciteta: do 50.000 steklenic na uro Leto izdelave: 2015 ODLIČNO STANJE To je več kot le hiter pregled. HEUFT sistem omogoča popoln pregled praznih steklenic iz stekla glede vseh napak, še preden so napolnjene, kar zagotavlja celovito kontrolo kakovosti in prinaša dodano vrednost celotnemu procesu polnjenja. Zakaj so ti HEUFT-ovi kontrolni sistemi ključni: 1. Popolna pokritost brez mrtvih kotov: Sistem ne pregleduje steklenice le površinsko, temveč izvaja celosten pregled dna, sten, zaključka in navojev iz vseh kotov. Takšna podrobnost je ključna za odkrivanje drobnih napak, ki jih človeško oko zlahka spregleda. 2. Napredne detekcijske tehnologije: Uporaba zmogljive kombinacije visokoločljivostnih kamer, pametne AI obdelave slik in pri nekaterih modelih tudi patentirane pulzne rentgenske tehnologije. To vključuje: - Napake v steklu: razpoke, okruški, vključki in poškodbe zaključka. - Tujki: vse od folije in cigaretnih ogorkov do insektov, ostankov tekočin (na primer kavstične sode ali olja) in – kar je najnevarnejše – steklenih drobcev, skritih na dnu. 3. Nizka stopnja lažnih izmetov: Zahvaljujoč inteligentni analizi slik (npr. HEUFT reflexx A.I.) sistem razlikuje kritične napake od nenevarnih kozmetičnih pomanjkljivosti, kar pomeni, da ne zavrže uporabnih steklenic. HEUFT SPECTRUM TX Centralizirano upravljanje: ena platforma za vse potrebe. Precizen, omrežno združljiv in integriran: HEUFT SPECTRUM TX predstavlja osnovo za različne tehnologije, module in funkcije. Naprave te generacije se lahko povsem prilagodijo individualnim potrebam na kraju samem in se lahko kadarkoli dogradijo zahvaljujoč univerzalni platformi.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, ULIČNI SESALNIK „CITY ANT AQUA“ Naprava za čiščenje urbanih površin, ulic, pločnikov, parkov, stadionov, železniških postaj, letališč, parkirišč ter industrijskih območij različnih vrst odpadkov. Ulični sesalnik City Ant deluje na električne akumulatorje, ki zagotavljajo do 9 ur avtonomnega delovanja. Polnjenje je možno preko 220V električnega omrežja čez noč. Enostavno vodljiv sesalnik za uporabo z eno roko, izjemno tih. Menjava vreče za odpadke traja le 2-3 minute. Brez emisij v zrak. Primeren je za pobiranje vseh vrst odpadkov: les, kovina, plastika, papir, karton, tekstilni odpadki, listje, cigaretni ogorki, pločevinke in steklenice (steklo, plastika in kovina) ipd. City Ant je primeren za različne površine: beton, asfalt, tlakovci, trata, pesek itd. Tehnične specifikacije: - Elektromotor: 48V / 1200W - Električni pogon 48V / 1200W za vožnjo naprej in nazaj - Tip zbiralnika odpadkov: zaboj (hopper) - Sesalna moč: 1,2 kW - Največja hitrost: 6 km/h - Prostornina zbiralnika: 240 l - Premer sesalne cevi: 125 mm Djdjvriluepfx Afaeuu - Dolžina sesalne cevi: 2,5 m - Avtonomija delovanja: 8 h - Čas polnjenja: 10-12 h - Kolesa: Ø 320 mm - Dvojna pršilnika - Prašni filter površine 16 m² - Sposobnost vzpenjanja do 25 % - Premagovanje robnikov do 15 cm - Pršilnik: 2 – zunanji in notranji - Opozorilna luč Cena: 11.500,00 EUR + funkcija aqua: 1.000 EUR neto

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, CNC MACHINING CENTER WITH EDGE BANDING UNIT AND ASSOCIATED POST-PROCESSING UNITS. Technical specifications: Working dimensions: + X-axis: 3,050 mm in single occupancy + X-axis: 900 mm in pendulum operation + Y-axis: Milling up to 1,220 mm with tool diameter 25 mm Edge banding up to 1,220 mm All units up to 1,170 mm Workpiece thickness up to 60 mm with standard clamps 6 workpiece consoles for hose-free vacuum system 4 workpiece stops in X-direction, integrated into the machine carrier, for large workpieces 6 workpiece stops in X-direction, one per console One workpiece stop each left & right in Y-direction 4 lifting rails for easy positioning of heavy workpieces LED setup assistance for easy positioning of vacuum cups and consoles Equipment: Milling spindle 11 kW, HSK F63 Speed 0 - 18,000 rpm Liquid cooling C-axis for use of processing units, with torque transmission and 3-point support 12-position tool change magazine Drilling head with 17 vertical spindles Spindle spacing 32 mm Air blow nozzle to clean workpiece edges Interchangeable edgebanding unit for 360° edgebanding from butt joints. With single-roll magazine With granulate feed Dodey Hrh Tspfx Afaouu Edge thickness up to 3 mm Adapter units: + Horizontal drilling head, cross-head design + Lock case milling unit, 2 outlets + Saw unit 90 degrees + Swiveling drilling/sawing unit + Combination radius milling / scraper unit Control: POWERCONTROL with: WOOD WOP AV license WOODWOP

Stanje: novo, Leto izdelave: 2026, Number of motors: 2 units Working length: 3000 mm Control: yes / CNC Loading dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Mitre Saw Exenso DS350E - 3000 mm For wooden glazing bars, muntin bars, profile strips, aluminium strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length: 3000 mm - Swivel range: 22.5° (internal) to 135° (external) - Right head movable - Saw blade mount: Ø 350 mm - Including 1 pc. center support. - Pneumatic clamping of aggregates. - Position control Exenso DS3 with touch panel 15” display in dust-protected monitor housing. - 3-axis control: 1 longitudinal axis and 2 swivel axes. - Manual entry of cutting data - Processing of data from a cutting list (data set as specified) - Processing of measuring tape data (wireless caliper GMF) - Ethernet port 10/100 (TCP/IP) - USB interface - Including control cabinet, motor, and software licenses. Item 1.2 Article number 942.5203 DS feed unit, hydropneumatic Item 1.3 Article number 723.0121 2 pcs. DS saw blade wood Bevel / bevel / flat tooth – positive Item 1.4 Article number 942.5236 2 sets of DS workpiece clamping, combined Combined workpiece clamping consisting of: Pneumatic swivel clamp for clamping the material from above. (Free access to the work table) Horizontal pneumatic clamp – anti-twist clamping cylinder with pressure pad. Clamps can be individually selected via saw’s control system. Clamping sequence can also be set through the control system. Dsdpfx Afsyy A Iksasuu Including safety pre-clamping pressure Scope of delivery for 2 sets: - 2 pcs. (left/right) vertical swivel clamps - 2 pcs. (left/right) horizontal clamps Item 1.5 Article number 942.5241 DS350 table support, slotted (standard slot; special slots per customer specification upon request) Item 3.1 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price for this configuration ex works – on request! ALTERNATIVE OPTIONS, prices on request! ----- For horizontal clamping of remnants when cutting square-cut glazing bars instead of 2nd set Item 1.3 943.5236 DS combined workpiece clamping! Item 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 pcs. anti-twist clamping cylinders - 2 pcs. cylinder holders with clamping lever ----- OPTIONAL accessories, at additional cost upon request: ----- Item 4.3 Article number 942.5237 DS software “Overlength” (subsequent steps must be confirmed) Process control incl. hardware. After input of a cutting length > max. cutting length of the unit, the cutting will be cycle-controlled. (Left unit cuts, right unit moves the material and cuts to size.) Item 2.1 Article number 944.1023 GMF caliper 3000 mm complete set (1500 mm plus 1500 mm extension) incl. charger and receiver. A robust aluminium measuring rail with a measuring range of 3,000 mm is ideal for measuring glazing bars. Functionality: For use on doors and large window sashes, the GMF caliper can be safely and quickly mechanically extended up to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic...

Leto izdelave: 2024, stanje: novo, The equipment set UMG-401.17 is designed for feeding logs with diameters ranging from 120 to 600 mm and lengths of 2,500 to 3,200 mm into woodworking machinery for further processing. This integrated system includes a Bruks BR1450 butt-end milling machine and a Valankone VK100 debarker (configured for birch wood), as well as a Vecoplan VAZ2000 bark shredder. Safe platforms and stairs are installed around the entire equipment unit to ensure convenient access for machine maintenance. The Valankone debarker is housed within a metal-framed shelter for environmental protection. The throughput of the line before the debarker is 12 pcs/min, and downstream of the debarker, log feed into the saw line is 28 pcs/min. Dodjv Uh N Djpfx Afaeuu

Stanje: rabljeno, Proizvajalec Nelson Tip FSE 100 / FSE 500 Po naši oceni je stroj v dobrem rabljenem stanju in ga je možno po dogovoru pod napetostjo tudi ogledati. Vključuje varilno glavo, cevi in komandno omaro 15 x Nelson FSE 100 + N4 inverter 5 x Nelson FSE 500 + N4 pretvornik Cena na kos. Dusdoy Ihbxjpfx Afaeu Pribor, prikazana orodja in vpenjala so vključeni v dobavo samo, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in informacijah ter vmesne prodaje!

Leto izdelave: 2001, stanje: dober (rabljeno), IMA gluing unit Spare part for e.g. IMA 680 / 480 / 980 Edge banding unit for 4-sided edging and all-round bonding on butt joints with: - Main pressure roller, diameter 100 mm, and pneumatically controlled secondary pressure roller, diameter 35 mm - Glue application for coating the edge material, with temperature and level control - Servo drive for edge feed with automatic adjustment to feed speed - Hot air post-activation unit 7.5 kW, on the glue side - IR emitter 600 watt on the decorative side for preventing material deformation on small radii - Pneumatically driven cross-cut saw - Butt joint detection - NC axis Rotation range up to 740 degrees, pneumatic Z-stroke 125 mm - Separate NC axis in Y (in portal applications X) operating independently from the main axis Part year: 2001, taken from IMA 680 V No. 2216 Scope of delivery as shown Dujdpfobxx Ikex Afaju Please check if this part can be installed in your machine. No returns possible. The unit was in production use for approx. 2 years and is in good condition. Technical data subject to change.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, SPECIFICATION KB-45 Cutting capacity: 455 mm Maximum working height: 255 mm Table: 600 x 500 mm Tilt: 4-way up to 15° Dsdpfx Aju Rdr Rjfasuu Saw blade length: 3490 mm Saw blade width: 3–16 mm Saw blade speed: 25–115 m/min Butt welder capacity: 3–16 mm Motor size: 1 HP Weight: 285 kg Height: 2020 mm Width: 1100 mm Depth: 660 mm STANDARD FEATURES Overload switch Single-phase/three-phase power supply Integrated saw blade and wheel cleaning brush Saw blade welding device, blade shear and grinding machine Grooved table Low-voltage halogen lamp Mitre guard for angled cuts Quick-release rip fence for straight cuts

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Cutting width: 508 mm Cutting height: 305 mm Table size: 600 x 560 mm Working height: 1000 mm Dedpfxjvkx H Ej Afajuu Roller diameter: 515 mm Cutting speed: 20 - 1000 m/min Saw blade width: 3 – 25 mm Saw blade length: 3975 mm Saw blade thickness: 0.65 – 0.9 mm Drive power: 1.5 kW Dimensions (L x W x H): 950 x 770 x 2000 mm Weight: 510 kg Accessories / Special Features: • Butt welding device for band saw blades (suitable only for carbon steel blades up to 0.65 mm width and not for bi-metal M 42!) • Infinitely variable cutting speed • Digital readout for cutting speed • Work table tiltable on 2 axes Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Leto izdelave: 2015, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Automated production plant for manufacturing pipe bends of SDR 11 and SDR 17 class. Patented bending system in which the pipe ends are inserted into the bending radius during the bending process. This reduces the reduction of the pipe’s outer wall during bending and accordingly lowers the costly need for additional material to compensate for wall thickness loss. Pipe bends can be produced with a final bend angle of 90°. Flexible adjustment of bending angle. Djdou Itlnepfx Afaouu Simultaneous heating of the bending preforms in a radiator field. Rotation of bending preforms during heating to achieve homogeneous heat distribution. Pipe ends are not heated, thus preserving their geometry. Therefore, the pipe bend can be further processed using conventional butt-welding techniques. Automatic transport of preforms from the buffer magazine up to the removal of finished pipe bends—adaptable according to customer requirements. Siemens PLC control system with touchscreen user interface.

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), skupna višina: 1.300 mm, največja dolžina izdelka: 4.500 mm, Pipe production line from 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt welding machine, as well as a cold saw for precise pipe cutting. It is suitable for round pipes with diameters from Ø16 to 63.5 mm and offers a feed speed of up to 120 m/min. Consider the option to purchase this Bazhou Wanxin pipe production line. Contact us for more information. • Dual-station decoiler • Function: Passive coil unwinding Djdpfx Aeyhfvlofaeuu • Design: Dual-station with 180° rotation; manual expansion • Advantage: Fast loading, easy operation • Hydraulic shear and butt welding machine • Function: Cutting front and rear strip ends, centering and subsequent welding • Design: Manual hydraulic shear with cantilever; front/rear pressure rollers; front/rear centering rollers; welding fixture • Cutting method: Hydraulic shear • Pressing method: Twin-cylinder press • Welding method: Manual welding • Coil accumulator • Function: Ensures continuous production during coil changeover • Design: Frame structure with movable and fixed frames (incl. feed unit) • Feed speed: up to 120 m/min • Accumulating speed: up to 200 m/min • Accumulated strip length: 200–400 m • Pinch roll motor: AC 11 kW • Forming and sizing mill • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000–2000 rpm; reduction gear: hardened gearbox; gears: spiral bevel gears • Entry/Forming: Passive 5-roll straightener; vertical rollers for strip feeding; forming via 7 horizontal + 8 vertical roll stands • Guiding/Pressing/Deburring/Cooling/Sizing: 6 horizontal + 5 vertical roll stands; 1 round sizing stand • Round sizing stand: 1 smoothing unit; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, material 40Cr, quenched and hardened • Horizontal roller shaft: Ø60 mm, bearing seat 55 mm, material 40Cr; surface hardness HRC 50–55 • Vertical roller shaft: Ø40 mm, material 40Cr, tempered/quenched and hardened • Bearing slides: Forged steel 45# • Stand type: Gantry type; opening width 120 mm; horizontal stand clamping adjustable via worm gear • Stand material: Welded, stress relieved • Pinch roller shaft: Ø50 mm, 2 rollers, manual screw adjustment • Guide shaft: Ø40 mm • Deburring knives: 2 pcs (1 in use, 1 spare) • Cooling tank: Included • Cold saw (Type KK-5-50) • Function: Cutting pipes to preset lengths at line speed • Pipe diameter: Round Ø16–63.5 mm (and corresponding square/rectangular) • Cutting length: 1–6 m • Material thickness: 0.6–2.5 mm • Saw motor: 11 kW AC with frequency inverter • Feed motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo (Yaskawa) • Feed mode: Servo multi-stage speed • Tracking speed: up to 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reducing gearbox: Model KK-80 • Saw stroke (rack length): 3 m Note • The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding. Additional equipment • Conveyor roller table, table, and packaging machine • Function: Automatic pipe transfer from the rolling mill to the table; packaging into hexagonal bundles • Roller table length: 16 m • Drive: 1 motor YCT200-4A, 5.5 kW

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Tip: BAS Maksimalna širina varjenja do 50 mm. Varilni stroj za čelno varjenje. Ročno vpenjanje. Širina rezila do 50 mm. Rabljeni stroj v delujočem stanju. Stroj je prebarvan. Varjenje tračnih žag za les do 50 mm. Dodpfew Snu Ssx Afaouu Varjenje tračnih žag za kovino do 34 mm. Dobava iz zaloge. Priklop: 220 V. Teža: ca. 180 kg. Pakiranje vključeno.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Enosmerni tok, vhodna napetost: 400 V, skupna višina: 2.890 mm, skupna širina: 2.440 mm, skupna dolžina: 2.890 mm, Mobile welding station, 10ft, for PE/PP pipes incl. HÜRNER CNC 500 (SST series) Industrial-grade butt fusion welding, independent of weather conditions Stop assembling makeshift welding tents on your construction site. This compact 10-foot welding station (SST 10 / 500) is a self-contained, ready-to-use production cell designed for demanding PE/PP pipeline construction projects. Plastic welds are sensitive to drafts and moisture—this container ensures stable, compliant ambient conditions and seamless documentation. Duedpfx Afeyzn Ifoaou Your advantages in pipe handling: The bottleneck on-site is material handling. This station is uncompromisingly engineered for ergonomics. Pipe sections are fed straight through the container via the 800x800 mm front-end pipe hatches (with integrated brush strips). The built-in 1,000 kg lift table, mobile pipe lifters, and an electric chain hoist make handling pipes up to OD 450 mm an efficient one-man operation. Plug & play: simply connect to power and start welding. Technical data (SST 10 / 500): - Container: 10' High Cube, double door, one way (incl. checker plate steel floor) - Welding machine: HÜRNER CNC 500 ECO 2.0 USB & Bluetooth data management - Working range: OD 200 to OD 450 mm (reducing inserts included) - Lifting equipment: Electric lift table (1,000 kg), electric chain hoist with trolley/manual travel gear (3m lift) - Pipe handling: 2x universal mobile lifters (up to DN500), 2x pipe hatches (800x800 mm) - Power distribution: 32A & 16A CEE (400V), 3x 16A Schuko (250V IP54), FI 63A - Lighting: 2x LED floodlights (24,000 lm, 5000 K), 2x LED moisture-proof fixtures - Condition: Fully welding-ready (CE), incl. DGUV inspection & 2x heavy-duty coating (customer color on request) - (Note: Delivered without power generator) Available versions of this series: This listing refers to the SST 10 / 500 version. We manufacture these stations in four standardized performance classes to match your project requirements: - SST 10 / 355: 10-foot container, for pipes up to OD 355 mm - SST 10 / 500: 10-foot container, for pipes up to OD 450 mm (offered model) - SST 20 / 355: 20-foot container (extended workspace), for pipes up to OD 355 mm - SST 20 / 500: 20-foot container (extended workspace), for pipes up to OD 450 mm Custom configurations are available on request. Please contact us for a detailed offer.

Stanje: rabljeno, Vertical bandsaw JAESPA Type MSU 4 Serial no. 724749 Year of manufacture: approx. 1980 Wheel diameter: 420 mm Throat: 400 mm Table size: 610 x 610 mm Cutting height: 260 mm Saw blade length: min. 3200 - max. 3400 mm Saw blade speed: 10-1500 m/min., stepless adjustment Power supply: 400 Volt, 50 Hz - Infinitely variable saw blade speed via 2 gearbox stages and stepless belt drive - Tilting saw table - Blade butt welding machine IDEAL BS0-16 - Blade shear Dsdjd Nbk Tspfx Afajuu - Grinding stone for dressing the welded seam Space requirements (L x W x H): 1000 x 850 x 1850 mm Weight: 400 kg Good condition

Stanje: rabljeno, Vertical Bandsaw MÖSSNER REKORD Type SM 420 Machine No. 17010 Year of manufacture: 1968 Wheel diameter: 420 mm Throat width: 415 mm Maximum workpiece height: 265 mm Table size: 605 x 600 mm Blade speed: 18 - 562 m/min, 8 steps Saw blade length min/max: 3150 / 3260 mm Drive power: 1.1 / 1.7 kW Power supply: 380 V 50 Hz - Bandsaw blade speed adjustable via 4 gearbox steps and 2 motor speeds - Saw blade butt-welding device IDEAL BS 0-16 with shear and grinding wheel - Worktable tiltable on 2 axes Dujdpfjdzqc Rjx Afaju Space requirement (L x W x H): 950 x 750 x 1900 mm Weight: 570 kg Good condition

Stanje: rabljeno, Vertical Bandsaw PEHAKA Type SM 4 Serial No. 27060 Year of manufacture: approx. 1980 Throat depth: 380 mm Table size: 620 x 480 mm Cutting height: 250 mm Wheel diameter: 400 mm Working height: 1120 mm Saw blade length: min. 2900 - max. 3100 mm Saw blade speed: 22–125 m/min, stepless Motor power: 0.6 / 0.75 kW Power connection: 380 Volt, 50 Hz - Stepless adjustment of blade speed via variomatic belt drive with lever adjustment and 2 motor speeds - Saw table tiltable +/- 15° - Blade butt-welding machine IDEAL BS 0-16 - Blade shear Djdpfsiv A U Eex Afaouu - Base frame made of U-section steel 100 x 50 mm, mobile with pallet truck Required space (L x W x H): 1050 x 800 x 1950 mm Weight: 355 kg Good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 24205, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 4.800 mm, pomik osi Y: 1.800 mm, pomik po osi Z: 100 mm, dolžina obdelovanca (maks.): 4.800 mm, širina obdelovanca (maks.): 1.800 mm, število mest v zalogovniku orodij: 18, skupna masa: 16.000 kg, moč vretenovega motorja: 12.000 W, število vreten: 1, premer obdelovanca (maks.): 1.800 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Izjemen stroj z izjemno kakovostnim izhodom. Stroj je bil servisiran s strani IMA serviserjev, uporabljeni so bili originalni rezervni deli. Optični kabel ter večina cevi za stisnjen zrak sta bila zamenjana z novimi. Avtomatsko pozicioniranje vakuumskih prijemal bistveno pospeši čas nastavitve. ImaWoop verzija 6.0 s funkcijo Quicktool dodatno olajša delo operaterja. Vabljeni, da si kadarkoli osebno ogledate delovanje stroja. Prav tako je možno vsak čas spremljati delovanje stroja preko video povezave v živo. CNC portalni obdelovalni center proizvajalec: IMA tip: BIMA P 480 V, 180/480 leto izdelave: 2001 Kratek opis Stroj zmore številne zahtevne naloge (rezkanje, vrtanje, razrez, lepljenje robov, različno kotno rezanje) - izmenično obdelovanje - X = 2 x 2.400 mm, Y = 1.800 mm - glavni vreteno 12 kW - 18-pozicijski menjalec orodij Djdpfxstt Rpws Afaouu - lepilna enota s 6-pozicijskim zalogovnikom za kolute Opis Delovno območje: z osnovnimi enotami Y = 1.800 mm menjalna miza za izmenično obdelavo: X = 2 x 2.400 mm (rezkanje in vrtanje) X = 2 x 2.100 mm (lepljenje) CNC linijski krmilnik IMATRONIC NT 231 Programska oprema Imawoop 6.0 Avtomatsko pozicioniranje vakuumskih prijemal Avtomatsko mazanje Transportni trak za odpadke in ostružke (trakasti) Glavni vreteno 12 kW z integrirano C-osjo, 360 stopinj Avtomatski menjalec orodij/priključnih enot, 18-kratni 1 enota za lepljenje robov VT100 z enoto za nanašanje lepila Debelina roba: 0,4–3 mm za 4-stransko in obodno lepljenje z ravnim stikom 6-pozicijski zalogovnik kolutov 1 enota za končno obrezovanje 0,8 kW Vključeni priključki: - žaga s fiksnim kotom 90° - horizontalna vrtalna enota s 4 izhodi - enota za obdelavo ABS robov - enota za zaobljanje in vodoravni strgalnik ABS robov Drugi priključki in orodja so na voljo proti doplačilu Transportni trak za odsesavanje odpadkov Klimatska naprava v elektro omari

Stanje: zelo dobro (rabljeno), Contact points for one-sided accessible welding joints with counterpole and welding cable, 1600 mm long with selector switch for operating mode "CONTACT WELDING" or CONNECTION FOR DALEX SPOT WELDING TONGS, Series 31 Dujdpfxopudqme Afaou with connection cable, main switch 16 A CEE plug connector

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, A complete production line for roundwood processing, based on frame saw (katr) technology. The line is capable of processing logs with top diameters from 15 cm and butt diameters up to 55 cm, with lengths from 2.5 to 9.5 m. The technology consists of: 1) Log deck for logs up to 10 m in length, with batching system 2) G710 frame saw, Královopolské Strojírny - The frame saw is equipped with a feed carriage mounted on rails and fitted with hydraulic log centering - At the saw exit, separating wedges divide central and side lumber - The frame saw is driven by a 55 kW electric motor Dsdpfxjxa Etto Afajuu - Detailed description in separate file - Roller conveyors follow the frame saw - Central lumber is returned via conveyors and directed to the second frame saw - Side lumber is continuously conveyed by log deck towards the edging center 3) G560 frame saw, Královopolské Strojírny - The frame saw is equipped with a feed carriage mounted on rails and fitted with hydraulic log centering - At the saw exit, separating wedges divide central and side lumber - The frame saw is driven by a 45 kW electric motor - Detailed description in separate file - Roller conveyor follows the frame saw, feeding side lumber towards the edger center log deck - Central lumber is removed immediately after sawing, stored on a rail-mounted carriage, and after a pack is completed, pulled out from the sawmill by a winch 4) Edging center, Strojírny Loučná n. Desnou - Max. cutting height: 26 mm, cutting width: 70–370 mm, total power input: 29.2 kW - Detailed description in separate file - Side lumber is batch-fed into the edging center via vertical log deck - If needed, wood is first trimmed to the required length. Length can be set to fixed size or optimized for maximum yield - After trimming, lumber is edged to fixed widths to achieve maximum yield. Post-edging, lumber is automatically conveyed to storage bins according to trimmed length. The final product is unsorted side lumber by width, generally 80 mm or wider.