Brusilni Stroj Za Odstranjevanje Zob nakup rabljenega (96.221)

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, Ibodpfx Adst Hw Shogea belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2026, Avtomatizirano brušenje zahvaljujoč nadzoru s pomočjo programljivega logičnega krmilnika (PLC). Delovna miza 406 × 813 mm. Magnetni vpenjalni sistem 400 × 800 mm. Največja obremenitev mize z magnetnim vpenjalnim sistemom: 500 kg. Servo-poganjana navpična os za natančno avtomatizirano napredovanje. Hidravlično podolžno napredovanje. Avtomatizirano navpično in prečno napredovanje. Isdpfx Adszr H Najgeba Hitrost delovne mize 7–23 m/min. Dimenzije brusilnega diska 350 × 40 × 127 mm. Število vrtljajev vretena 1450 vrt/min. Moč motorja vretena 5,5 kW. Skupna moč stroja 9 kW. Hrapavost površine do Ra 0,63 µm. Avtomatizirani navpični hod se giblje med 0,005 / 0,01 / 0,02 / 0,03 / 0,04 / 0,05 mm/hod, kar omogoča prilagoditev obratovalnih parametrov glede na vrsto materiala, zahtevano natančnost in želeno kakovost površine. Na voljo je še en model z večjo delovno mizo: SMP40100AHD (406 x 1020 mm) – po ceni 26.000 €.

Stanje: novo, Leto izdelave: 2026, Avtomatsko brušenje zahvaljujoč krmiljenju s PLC (programirljivo logično enoto). Delovna miza 250 x 500 mm. Magnetna vpenjalna plošča 250 x 500 mm. Maksimalna obremenitev mize z magnetno vpenjalno ploščo: 180 kg. Servomotorno pogonjena navpična os za natančno avtomatsko podajanje. Ijdpfjzr H E Uox Adgoba Hidravlično podajanje v vzdolžni smeri. Avtomatsko podajanje v navpični in prečni smeri. Hitrost delovne mize 7–23 m/min. Dimenzije brusilnega diska 200 x 20 x 31,75 mm. Moč vretena 2,2 kW. Skupna moč stroja 3,7 kW. Hrapavost površine do Ra 0,63 µm. Vključno z: sistemom za hlajenje, magnetnim separatorjem, hidravlično postajo, sistemom za mazanje, magnetno vpenjalno ploščo, krmiljenjem s PLC in zaslonom na dotik. Avtomatsko podajanje v navpični smeri omogoča vrednosti 0,005 / 0,01 / 0,02 / 0,03 / 0,04 / 0,05 mm/gib in tako omogoča prilagoditev delovnih parametrov glede na vrsto materiala, zahtevano natančnost in želeno kvaliteto površine. Na voljo je še en model z večjo delovno mizo: SMP3063AHD (635 x 305 mm) po ceni 22.000 €.

Stanje: dober (rabljeno), Leto izdelave: 1985, Edge sander for solid wood with star wheel for curves Iedpfjir Ukuox Adgsba with oscillation

Stanje: novo, Leto izdelave: 2025, Working width: 380 mm Working height: 250 mm 1st unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive Ibodpfx Ajv R U Ifedgoa 2nd unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive Both units with oscillation: yes Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: novo, Leto izdelave: 2024, Delovna širina: 380 mm Delovna višina: 150 mm 1. Sklop, rotorska skupina: Skupina 5 nihajnih rotorskih ščetk, Ø 115 mm, vsaka z motorjem 3 kW 2. Sklop, ščetka: Scotch Brite Hard / premer 210 mm, variabilni pogon Nastavitev višine: ročni ročaj Prikaz višine: mehanski števec Hitrost podajanja: 4 - 12 m/min Moč pogonskega motorja: 0,37 kW Vakuumska preproga: da Dolžina stroja: 1400 mm Širina stroja: 900 mm Teža: 500 kg Ibjdpetnf Rrjfx Adgea

Stanje: novo, Leto izdelave: 2022, Band width: 150 mm Band length: 2600 mm Oscillation: yes Ijdpsiuld Dsfx Adgjba Sanding rollers for curves: 1 Tiltable sanding unit: yes Table size: 750 mm x 290 mm Extraction port: 120 mm Motor power: 3 kW Machine length: 1700 mm Machine width: 700 mm Weight: 180 kg

Stanje: novo, Leto izdelave: 2025, Bandwidth: 200 mm Belt length: 3000 mm Table size: 960 mm x 352 mm Auxiliary table: 330 mm x 330 mm Ibjdpfxjhy Iyvo Adgea Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 900 mm Weight: 310 kg

Stanje: novo, Leto izdelave: 2022, Belt width: 150 mm Belt length: 2740 mm Veneer sanding unit: no Oscillation: yes Roller diameter: 115 mm Sanding unit tiltable: yes / 90° - 0° Worktable: 900 x 305 mm Auxiliary table: 290 x 260 mm Belt speed: 16 m/sec Extraction port: 100 mm Motor power: 3 kW / 400 V Machine length: 1540 mm Iedpfx Ajhq A H Dsdgoba Machine width: 750 mm Weight: 220 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Band width: 150 mm Belt length: 2170 mm Table size: 1440 mm x 710 mm Veneer sanding unit: yes Oscillation: yes Tilting table: yes, 0°–45° Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Machine width: 800 mm Iedehpmahjpfx Adgoba Weight: 530 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Band width: 150 mm Band length: 2400 mm Veneer sanding unit: no Oscillation: yes Roller diameter: mm Ibedpfshpmadex Adgja Sanding unit tiltable: yes / 90° - 0° Worktable: 730 x 300 mm Auxiliary table: 420 x 400 mm Belt speed: 14 m/sec Extraction connection: 120 mm Motor power: 1.8 kW / 400 V Machine length: 1480 mm Machine width: 680 mm Weight: 160 kg

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Ibodpfswyda Usx Adgja Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: rabljeno, Stroj za odstranjevanje kože Iz nerjavečega jekla Proizvajalec: Maja Model: BXA 554 Dimenzije: 1250x1050x2000 mm Napetost: 400V 50Hz 3N Električna moč: 1,1 kW Ibedpjr D Rh Nefx Adgoa Širina noža: 554 mm

Stanje: rabljeno, Širina reza: 430 mm Hitrost rezanja: 24 m/min Največja vhodna višina: 90 mm Vrzel med rezili: 0 - 5 mm Iedpfxst Uqbfj Adgoba Minimalna dolžina obdelovanca na dovodnem traku: 400 mm Dovodni trak: 850 x 425 mm Odtokovni trak: 650 x 425 mm Skupne dimenzije (Š x V x G, z/ brez odtokovnega traku): 800 x 1190 x 1660 / 1210 mm Teža (z/ brez odtokovnega traku): 225 / 210 kg Moč motorja: 0,75 kW Električni priklop: 3~ 400 V, 50 Hz, 16 A Stisnjen zrak: ni potreben

Stanje: rabljeno, Stroji za odstranjevanje kože Maja Tip: ESB 3441 Iedpfx Ajrgar Tedgoba Moč: 1,1 kW Napetost: 380 V Dimenzije: 70x114x95 cm Dobavni rok: 10 delovnih dni po prejetju avansa

Stanje: rabljeno, Model: David 200 naprava za odstranjevanje ščetine in plamenjenje Kapaciteta zakola: približno 40–50 prašičev na uro Ijdpfotq T Tkex Adgoba Primerno za prašiče do približno 270 kg Ohišje stroja iz vroče cinkane ali nerjaveče pločevine Vgrajena električna omarica Valj opremljen s 36 posebnimi tolkači Električna moč: 5,5 kW Mere stroja (v cm): Širina: 240 Dolžina: 340 Višina: 250

Stanje: rabljeno, Tip: David stroj za oparjenje in osmoditev svinj Kapaciteta klanja: približno 40-50 prašičev/uro Največja teža prašičev: do približno 270 kg Ijdpfxjg Swz Ho Adgjba Ohišje stroja: vroče cinkano ali iz nerjavečega jekla Vgrajena elektro omara Valj opremljen s 36 posebnimi tolkači Električna moč: 5,5 kW Vgradne dimenzije stroja (v cm): Širina: 240 Dolžina: 340 Višina: 250 Dobavni rok: po prejetem avansnem plačilu je stroj običajno obnovljen in pripravljen za dobavo

Stanje: rabljeno, Stroji za odstranjevanje kože Ijdpfjqlcbkox Adgsba Maja Dimenzije: 70 x 85 x 120 cm

Stanje: rabljeno, Leto izdelave: 2002, Rabljeni stroj Leto izdelave: 2002 Robni brusilni stroj z elektromehansko oscilacijo prek 15 mm nihajnega hoda motornega diska. Nagib brusilnega agregata ročno z ročico za 90° (brezstopenjska nastavitev kota; odčitek po lestvici). Dodatna miza z odsesavanjem za uporabo brusnih valjev. Višinsko nastavljiva miza za optimalno izrabo brusnega traku. Motor: 2,2 kW Ibjdpfx Aew I U Ahedgoa Oscilacijski motor: 0,11 kW Velikost mize: 880 x 370 mm Mere pasu: 150 x 2580 mm Dimenzije stroja: 1700 x 1000 x 1150 mm Teža: 250 kg Razpoložljivost: kratkoročno Lokacija skladišča: Flörsheim

Stanje: dober (rabljeno), Leto izdelave: 2001, Električni priključek: 380/400 V, 50 Hz Višina delovne površine: 970 mm Širina: 2650 mm Globina: 1200 mm Višina: 1750 mm Teža: približno 800 kg Iedpfx Adozpa Rlsgoba Stanje: dobro, rabljeno

Stanje: rabljeno, Stroj za brušenje svrdala DECKEL SOE Ibedpfxjzmwkks Adgsa Brzina vretena: 4.500 o/min Maksimalni promjer stezne glave: 17,5 mm Maksimalni promjer oštrenja: 10 mm Maksimalni bočni pomak: 10 mm Podešavanje kuta: 45° Maksimalni hod: 100 mm (pogledajte tehničke detalje) Isporučuje se s 1 setom stezaljki i raznim dijamantnim brusnim pločama Napon: 380 V Širina: 600 mm Dubina: 600 mm Ukupna visina: 1.300 mm Težina: cca 150 kg

Stanje: rabljeno, Leto izdelave: 2025, Nova razstavna naprava! Maloprodajna cena: 4.938 € neto. Zgornji del je izdelan iz robustne litega jekla in vsebuje vgrajen trifazni motor 380 V, 2,2 kW, 2850 vrt/min; naprava je opremljena z vgrajeno kombinacijo stikala in vtičnice; varovalo motorja in glavno stikalo v skladu s standardom VDE; dimenzije zadnje plošče brusilnega pasu: 850 x 150 mm; jeklena miza je nastavljiva po višini s pomočjo vzmetne sile; dimenzije brusilnega pasu: 150 x 2280 mm; zadnja plošča brusilnega pasu je obložena z grafitnim drsnim slojem; naprava je dobavljena s kompletom brusilnih pasov; vključeno je tudi podaljšek in omejevalnik za kota. Naprava je, ob priključitvi na osrednji sistem za odsesavanje, preizkušena glede prahu pri minimalni hitrosti zraka 20 m/s (GS) – Holz-BG-Stuttgart. Serijska oprema: - možnost nagiba 90–180° - motorizirana oscilacija pasu - majhna oporna miza ob vodilni roli - pnevmatska napenjalna naprava za pas Tehnični podatki: Moč motorja: 2,2 kW Dimenzije brusilnega pasu: 150 x 2280 mm Hitrost brusilnega pasu: 22 m/s Velikost mize: 750 x 350 mm Prostorske zahteve: 1000 x 800 mm Teža: od 180 kg Premer odsesovalnega priključka: 100 mm Ijdox Hwpvspfx Adgsba Lokacija skladišča: Rieth.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The robust Junior R1 offers all the features expected from a modern edge sanding machine. A heavy-duty grey cast iron sanding unit with a powerful motor delivers maximum sanding performance. The working table, adjustable in height by spring pressure, allows for optimal belt utilization and safe operation. Optional upgrades include belt oscillation, stepless unit tilting, a veneer sanding device, and an additional table for sanding work on the deflection roller. The machine is supplied with a set of sanding belts; a square and mitre gauge are also included in the delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Belt speed: 22 m/sec. • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm Ibodpfx Aod R Ev Dodgsa • Weight: from 180 kg • Extraction port Ø: 100 mm Location: In stock at 54634 Bitburg - free loading - Can be shipped for a fee

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. Ibedofig Rwepfx Adgea The Four Sanding Stations 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Included Accessories: – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: novo, Leto izdelave: 2024, Holzkraft Edge Sanding Machine Model: KSO 200 F with Veneer Sanding Attachment The sanding unit is tiltable up to 45° via a lever. The machine frame, constructed from welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with a separate gear motor for improved sanding results. Oscillation can be optionally switched on or off. Sanding shoe equipped with graphite lining for increased belt life. Height-adjustable sanding table to utilize the full width of the sanding belt. Height-adjustable auxiliary table with extraction for sanding radii. Spring-loaded belt tensioning automatically compensates for differences in belt length. Equipped with dual extraction ports. Extendable roller table extension. Rubber-coated sanding drum. Veneer edge sanding attachment with contact shoe featuring fine adjustment, pressure relief rollers, and stop rulers. Infeed ruler with grooves for veneer overhangs. Quick changeover from veneer edge to solid wood sanding. Dimensions and Weights Length: approx. 1900 mm Width/Depth: approx. 900 mm Height: approx. 1350 mm Weight: approx. 290 kg Dust Extraction Connection Extraction port diameter: 140 / 100 mm Drive Power Oscillation motor: 0.25 kW Work Table(s) Work table length: 960 mm Work table width: 350 mm Work table height adjustment: 230 mm Min. height: 735 mm Max. height: 965 mm Longitudinal table height adjustment: 230 mm Cross table length: 330 mm Cross table width: 330 mm Cross table min. height: 720 mm Cross table max. height: 900 mm Cross table height adjustment: 180 mm Electrical Data Main drive motor: 3.0 kW Connection voltage: 400 V Sanding Unit Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt speed: 20 m/s Sanding surface length: 1050 mm Iodpfelht H Nex Adgsba Sanding surface width: 200 mm Oscillation stroke: 20 mm Location: Ex stock 54634 Bitburg - immediately available -